Re: ath5k: can't browse at all.

[Irwan Siajadi <dev.bahamot@yahoo.com>]

Further testing shows that if I change from WPA2/AES to WPA/TIKIP, I can finally browse. But it's still hit and missed, I need to reload the pages once or twice before the pages can load properly. 

Thanks for the reply.

--- On Mon, 11/24/08, Pavel Roskin <proski@gnu.org> wrote:

> From: Pavel Roskin <proski@gnu.org>
> Subject: Re: ath5k: can't browse at all.
> To: "Irwan Siajadi" <dev.bahamot@yahoo.com>
> Cc: linux-wireless@vger.kernel.org
> Date: Monday, November 24, 2008, 6:53 PM
> On Mon, 2008-11-24 at 09:41 -0800, Irwan Siajadi wrote:
> > The AR2425 is able to obtain IP address from the
> router, 
> > able to ping with good results, but can't browse
> at all.
> > Below are the info on my setup, if you need more info
> please let me know.
> 
> That's unlikely to be a driver problem.  The driver
> doesn't distinguish
> pings from other packets.  The only significant difference
> could be in
> the packet size.  You can try ping with larger packets to
> check if
> that's the problem.
> 
> I suggest that you use normal network troubleshooting
> procedures and not
> assume the driver to be a problem unless you have a better
> evidence.
> Check routing, check if the nameservers in /etc/resolv.conf
> are working.
> I'm sure there are detailed guides how to troubleshoot
> networks.
> 
> -- 
> Regards,
> Pavel Roskin