* Re: [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
[not found] <20200314094328.3331-1-rjliao@codeaurora.org>
@ 2020-03-16 15:04 ` bgodavar
2020-03-23 9:12 ` Rocky Liao
[not found] ` <20200314094328.3331-2-rjliao@codeaurora.org>
` (2 subsequent siblings)
3 siblings, 1 reply; 10+ messages in thread
From: bgodavar @ 2020-03-16 15:04 UTC (permalink / raw)
To: Rocky Liao
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth,
linux-arm-msm, c-hbandi, hemantg, mka
On 2020-03-14 15:13, Rocky Liao wrote:
> This patch adds support for QCA6390, including the devicetree and acpi
> compatible hwid matching, and patch/nvm downloading.
>
> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
> ---
> drivers/bluetooth/btqca.c | 44 +++++++++++++++++++++++++++++++----
> drivers/bluetooth/btqca.h | 8 +++++++
> drivers/bluetooth/hci_qca.c | 46 +++++++++++++++++++++++++++++++------
> 3 files changed, 86 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index a16845c0751d..ca126e499c58 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -14,6 +14,9 @@
>
> #define VERSION "0.1"
>
> +#define QCA_IS_3991_6390(soc_type) \
> + (soc_type == QCA_WCN3991 || soc_type == QCA_QCA6390)
> +
[Bala]: Why don't we do >= QCA_WCN3991 (mostly both the devices support
same features)
> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> enum qca_btsoc_type soc_type)
> {
> @@ -32,7 +35,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
> *soc_version,
> * VSE event. WCN3991 sends version command response as a payload to
> * command complete event.
> */
> - if (soc_type == QCA_WCN3991) {
> + if (QCA_IS_3991_6390(soc_type)) {
> event_type = 0;
> rlen += 1;
> rtype = EDL_PATCH_VER_REQ_CMD;
> @@ -69,7 +72,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
> *soc_version,
> goto out;
> }
>
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> memmove(&edl->data, &edl->data[1], sizeof(*ver));
>
> ver = (struct qca_btsoc_version *)(edl->data);
> @@ -138,6 +141,29 @@ int qca_send_pre_shutdown_cmd(struct hci_dev
> *hdev)
> }
> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>
> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
> +{
> + struct sk_buff *skb;
> + int err;
> + const u8 param[2] = {0x14, 0x01};
[Bala]: advisable to use MACRO's
> +
> + bt_dev_dbg(hdev, "QCA enhanced log enable cmd");
> +
> + skb = __hci_cmd_sync_ev(hdev, QCA_ENHANCED_LOG_ENABLE_CMD, 2,
> + param, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
> +
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Enhanced log enable cmd failed (%d)", err);
> + return err;
> + }
> +
> + kfree_skb(skb);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(qca_send_enhancelog_enable_cmd);
> +
> static void qca_tlv_check_data(struct qca_fw_config *config,
> const struct firmware *fw, enum qca_btsoc_type soc_type)
> {
> @@ -217,7 +243,7 @@ static void qca_tlv_check_data(struct qca_fw_config
> *config,
> tlv_nvm->data[0] |= 0x80;
>
> /* UART Baud Rate */
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> tlv_nvm->data[1] = nvm_baud_rate;
> else
> tlv_nvm->data[2] = nvm_baud_rate;
> @@ -268,7 +294,7 @@ static int qca_tlv_send_segment(struct hci_dev
> *hdev, int seg_size,
> * VSE event. WCN3991 sends version command response as a payload to
> * command complete event.
> */
> - if (soc_type == QCA_WCN3991) {
> + if (QCA_IS_3991_6390(soc_type)) {
> event_type = 0;
> rlen = sizeof(*edl);
> rtype = EDL_PATCH_TLV_REQ_CMD;
> @@ -301,7 +327,7 @@ static int qca_tlv_send_segment(struct hci_dev
> *hdev, int seg_size,
> err = -EIO;
> }
>
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> goto out;
>
> tlv_resp = (struct tlv_seg_resp *)(edl->data);
> @@ -442,6 +468,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
> baudrate,
> (soc_ver & 0x0000000f);
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crbtfw%02x.tlv", rom_ver);
> + } else if (soc_type == QCA_QCA6390) {
> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
> + (soc_ver & 0x0000000f);
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/htbtfw%02x.tlv", rom_ver);
[Bala]: This part we need to rethink to having to optimize.
ROME use: rampatch<>.tlv
WCN399x: uses cr<>.tlv
QCA6390: uses ht
tomorrow if some new chipset comes, it uses different name again a we
need to handle this part.
i would suggest add this prefix to "qca_bluetooth_of_match"
which can be passed as argument
> } else {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/rampatch_%08x.bin", soc_ver);
> @@ -464,6 +495,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
> baudrate,
> else if (qca_is_wcn399x(soc_type))
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crnv%02x.bin", rom_ver);
> + else if (soc_type == QCA_QCA6390)
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/htnv%02x.bin", rom_ver);
> else
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/nvm_%08x.bin", soc_ver);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index e16a4d650597..bc703817c3d7 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -14,6 +14,7 @@
> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
> #define MAX_SIZE_PER_TLV_SEGMENT (243)
> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
> +#define QCA_ENHANCED_LOG_ENABLE_CMD (0xFC17)
>
> #define EDL_CMD_REQ_RES_EVT (0x00)
> #define EDL_PATCH_VER_RES_EVT (0x19)
> @@ -127,6 +128,7 @@ enum qca_btsoc_type {
> QCA_WCN3990,
> QCA_WCN3991,
> QCA_WCN3998,
> + QCA_QCA6390,
> };
>
> #if IS_ENABLED(CONFIG_BT_QCA)
> @@ -139,6 +141,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
> *soc_version,
> enum qca_btsoc_type);
> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev);
> static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
> {
> return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3991 ||
> @@ -178,4 +181,9 @@ static inline int qca_send_pre_shutdown_cmd(struct
> hci_dev *hdev)
> {
> return -EOPNOTSUPP;
> }
> +
> +static inline int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
> +{
> + return -EOPNOTSUPP;
> +}
> #endif
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 439392b1c043..0176264b0828 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -26,6 +26,7 @@
> #include <linux/mod_devicetable.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/acpi.h>
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> #include <linux/serdev.h>
> @@ -1596,7 +1597,7 @@ static int qca_setup(struct hci_uart *hu)
> set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>
> bt_dev_info(hdev, "setting up %s",
> - qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
> + qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");
>
> retry:
> ret = qca_power_on(hdev);
> @@ -1639,6 +1640,12 @@ static int qca_setup(struct hci_uart *hu)
> qca_debugfs_init(hdev);
> hu->hdev->hw_error = qca_hw_error;
> hu->hdev->cmd_timeout = qca_cmd_timeout;
> +
> + /* QCA6390 FW doesn't enable enhanced log by default
> + * need to send VSC to enable it
> + */
> + if (soc_type == QCA_QCA6390)
> + qca_send_enhancelog_enable_cmd(hdev);
> } else if (ret == -ENOENT) {
> /* No patch/nvm-config found, run with original fw/config */
> ret = 0;
> @@ -1665,10 +1672,10 @@ static int qca_setup(struct hci_uart *hu)
> }
>
> /* Setup bdaddr */
> - if (qca_is_wcn399x(soc_type))
> - hu->hdev->set_bdaddr = qca_set_bdaddr;
> - else
> + if (soc_type == QCA_ROME)
> hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> + else
> + hu->hdev->set_bdaddr = qca_set_bdaddr;
>
> return ret;
> }
> @@ -1721,6 +1728,11 @@ static const struct qca_vreg_data
> qca_soc_data_wcn3998 = {
> .num_vregs = 4,
> };
>
> +static const struct qca_vreg_data qca_soc_data_qca6390 = {
> + .soc_type = QCA_QCA6390,
> + .num_vregs = 0,
> +};
> +
> static void qca_power_shutdown(struct hci_uart *hu)
> {
> struct qca_serdev *qcadev;
> @@ -1764,7 +1776,7 @@ static int qca_power_off(struct hci_dev *hdev)
> enum qca_btsoc_type soc_type = qca_soc_type(hu);
>
> /* Stop sending shutdown command if soc crashes. */
> - if (qca_is_wcn399x(soc_type)
> + if (soc_type != QCA_ROME
> && qca->memdump_state == QCA_MEMDUMP_IDLE) {
> qca_send_pre_shutdown_cmd(hdev);
> usleep_range(8000, 10000);
> @@ -1900,7 +1912,11 @@ static int qca_serdev_probe(struct serdev_device
> *serdev)
> return err;
> }
> } else {
> - qcadev->btsoc_type = QCA_ROME;
> + if (data)
> + qcadev->btsoc_type = data->soc_type;
> + else
> + qcadev->btsoc_type = QCA_ROME;
> +
> qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
> GPIOD_OUT_LOW);
> if (!qcadev->bt_en) {
> @@ -2044,21 +2060,37 @@ static int __maybe_unused qca_resume(struct
> device *dev)
>
> static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
>
> +#ifdef CONFIG_OF
> static const struct of_device_id qca_bluetooth_of_match[] = {
> { .compatible = "qcom,qca6174-bt" },
> + { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
> { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
> { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
> { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
> +#endif
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
> + { "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
> +#endif
> +
>
> static struct serdev_device_driver qca_serdev_driver = {
> .probe = qca_serdev_probe,
> .remove = qca_serdev_remove,
> .driver = {
> .name = "hci_uart_qca",
> - .of_match_table = qca_bluetooth_of_match,
> + .of_match_table = of_match_ptr(qca_bluetooth_of_match),
> + .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
> .pm = &qca_pm_ops,
> },
> };
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
2020-03-16 15:04 ` [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390 bgodavar
@ 2020-03-23 9:12 ` Rocky Liao
0 siblings, 0 replies; 10+ messages in thread
From: Rocky Liao @ 2020-03-23 9:12 UTC (permalink / raw)
To: bgodavar
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth,
linux-arm-msm, c-hbandi, hemantg, mka
在 2020-03-16 23:04，bgodavar@codeaurora.org 写道：
> On 2020-03-14 15:13, Rocky Liao wrote:
>> This patch adds support for QCA6390, including the devicetree and acpi
>> compatible hwid matching, and patch/nvm downloading.
>>
>> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c | 44 +++++++++++++++++++++++++++++++----
>> drivers/bluetooth/btqca.h | 8 +++++++
>> drivers/bluetooth/hci_qca.c | 46
>> +++++++++++++++++++++++++++++++------
>> 3 files changed, 86 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index a16845c0751d..ca126e499c58 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -14,6 +14,9 @@
>>
>> #define VERSION "0.1"
>>
>> +#define QCA_IS_3991_6390(soc_type) \
>> + (soc_type == QCA_WCN3991 || soc_type == QCA_QCA6390)
>> +
>
> [Bala]: Why don't we do >= QCA_WCN3991 (mostly both the devices
> support same features)
>
OK
>> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> enum qca_btsoc_type soc_type)
>> {
>> @@ -32,7 +35,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> * VSE event. WCN3991 sends version command response as a payload to
>> * command complete event.
>> */
>> - if (soc_type == QCA_WCN3991) {
>> + if (QCA_IS_3991_6390(soc_type)) {
>> event_type = 0;
>> rlen += 1;
>> rtype = EDL_PATCH_VER_REQ_CMD;
>> @@ -69,7 +72,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> goto out;
>> }
>>
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> memmove(&edl->data, &edl->data[1], sizeof(*ver));
>>
>> ver = (struct qca_btsoc_version *)(edl->data);
>> @@ -138,6 +141,29 @@ int qca_send_pre_shutdown_cmd(struct hci_dev
>> *hdev)
>> }
>> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>>
>> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
>> +{
>> + struct sk_buff *skb;
>> + int err;
>> + const u8 param[2] = {0x14, 0x01};
>
> [Bala]: advisable to use MACRO's
>
This func will be removed, we don't need to enable enhanced log by
default. It can be done by hcitool whenever needed.
>> +
>> + bt_dev_dbg(hdev, "QCA enhanced log enable cmd");
>> +
>> + skb = __hci_cmd_sync_ev(hdev, QCA_ENHANCED_LOG_ENABLE_CMD, 2,
>> + param, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
>> +
>> + if (IS_ERR(skb)) {
>> + err = PTR_ERR(skb);
>> + bt_dev_err(hdev, "Enhanced log enable cmd failed (%d)", err);
>> + return err;
>> + }
>> +
>> + kfree_skb(skb);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(qca_send_enhancelog_enable_cmd);
>> +
>> static void qca_tlv_check_data(struct qca_fw_config *config,
>> const struct firmware *fw, enum qca_btsoc_type soc_type)
>> {
>> @@ -217,7 +243,7 @@ static void qca_tlv_check_data(struct
>> qca_fw_config *config,
>> tlv_nvm->data[0] |= 0x80;
>>
>> /* UART Baud Rate */
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> tlv_nvm->data[1] = nvm_baud_rate;
>> else
>> tlv_nvm->data[2] = nvm_baud_rate;
>> @@ -268,7 +294,7 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> * VSE event. WCN3991 sends version command response as a payload to
>> * command complete event.
>> */
>> - if (soc_type == QCA_WCN3991) {
>> + if (QCA_IS_3991_6390(soc_type)) {
>> event_type = 0;
>> rlen = sizeof(*edl);
>> rtype = EDL_PATCH_TLV_REQ_CMD;
>> @@ -301,7 +327,7 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> err = -EIO;
>> }
>>
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> goto out;
>>
>> tlv_resp = (struct tlv_seg_resp *)(edl->data);
>> @@ -442,6 +468,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> (soc_ver & 0x0000000f);
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/crbtfw%02x.tlv", rom_ver);
>> + } else if (soc_type == QCA_QCA6390) {
>> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
>> + (soc_ver & 0x0000000f);
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/htbtfw%02x.tlv", rom_ver);
>
> [Bala]: This part we need to rethink to having to optimize.
>
> ROME use: rampatch<>.tlv
> WCN399x: uses cr<>.tlv
> QCA6390: uses ht
> tomorrow if some new chipset comes, it uses different name again a we
> need to handle this part.
> i would suggest add this prefix to "qca_bluetooth_of_match"
> which can be passed as argument
>
I would like to do this in a separate patch.
>> } else {
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/rampatch_%08x.bin", soc_ver);
>> @@ -464,6 +495,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> else if (qca_is_wcn399x(soc_type))
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/crnv%02x.bin", rom_ver);
>> + else if (soc_type == QCA_QCA6390)
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/htnv%02x.bin", rom_ver);
>> else
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/nvm_%08x.bin", soc_ver);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index e16a4d650597..bc703817c3d7 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -14,6 +14,7 @@
>> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
>> #define MAX_SIZE_PER_TLV_SEGMENT (243)
>> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
>> +#define QCA_ENHANCED_LOG_ENABLE_CMD (0xFC17)
>>
>> #define EDL_CMD_REQ_RES_EVT (0x00)
>> #define EDL_PATCH_VER_RES_EVT (0x19)
>> @@ -127,6 +128,7 @@ enum qca_btsoc_type {
>> QCA_WCN3990,
>> QCA_WCN3991,
>> QCA_WCN3998,
>> + QCA_QCA6390,
>> };
>>
>> #if IS_ENABLED(CONFIG_BT_QCA)
>> @@ -139,6 +141,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> enum qca_btsoc_type);
>> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
>> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev);
>> static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
>> {
>> return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3991 ||
>> @@ -178,4 +181,9 @@ static inline int qca_send_pre_shutdown_cmd(struct
>> hci_dev *hdev)
>> {
>> return -EOPNOTSUPP;
>> }
>> +
>> +static inline int qca_send_enhancelog_enable_cmd(struct hci_dev
>> *hdev)
>> +{
>> + return -EOPNOTSUPP;
>> +}
>> #endif
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 439392b1c043..0176264b0828 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -26,6 +26,7 @@
>> #include <linux/mod_devicetable.h>
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> +#include <linux/acpi.h>
>> #include <linux/platform_device.h>
>> #include <linux/regulator/consumer.h>
>> #include <linux/serdev.h>
>> @@ -1596,7 +1597,7 @@ static int qca_setup(struct hci_uart *hu)
>> set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>>
>> bt_dev_info(hdev, "setting up %s",
>> - qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
>> + qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");
>>
>> retry:
>> ret = qca_power_on(hdev);
>> @@ -1639,6 +1640,12 @@ static int qca_setup(struct hci_uart *hu)
>> qca_debugfs_init(hdev);
>> hu->hdev->hw_error = qca_hw_error;
>> hu->hdev->cmd_timeout = qca_cmd_timeout;
>> +
>> + /* QCA6390 FW doesn't enable enhanced log by default
>> + * need to send VSC to enable it
>> + */
>> + if (soc_type == QCA_QCA6390)
>> + qca_send_enhancelog_enable_cmd(hdev);
>> } else if (ret == -ENOENT) {
>> /* No patch/nvm-config found, run with original fw/config */
>> ret = 0;
>> @@ -1665,10 +1672,10 @@ static int qca_setup(struct hci_uart *hu)
>> }
>>
>> /* Setup bdaddr */
>> - if (qca_is_wcn399x(soc_type))
>> - hu->hdev->set_bdaddr = qca_set_bdaddr;
>> - else
>> + if (soc_type == QCA_ROME)
>> hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
>> + else
>> + hu->hdev->set_bdaddr = qca_set_bdaddr;
>>
>> return ret;
>> }
>> @@ -1721,6 +1728,11 @@ static const struct qca_vreg_data
>> qca_soc_data_wcn3998 = {
>> .num_vregs = 4,
>> };
>>
>> +static const struct qca_vreg_data qca_soc_data_qca6390 = {
>> + .soc_type = QCA_QCA6390,
>> + .num_vregs = 0,
>> +};
>> +
>> static void qca_power_shutdown(struct hci_uart *hu)
>> {
>> struct qca_serdev *qcadev;
>> @@ -1764,7 +1776,7 @@ static int qca_power_off(struct hci_dev *hdev)
>> enum qca_btsoc_type soc_type = qca_soc_type(hu);
>>
>> /* Stop sending shutdown command if soc crashes. */
>> - if (qca_is_wcn399x(soc_type)
>> + if (soc_type != QCA_ROME
>> && qca->memdump_state == QCA_MEMDUMP_IDLE) {
>> qca_send_pre_shutdown_cmd(hdev);
>> usleep_range(8000, 10000);
>> @@ -1900,7 +1912,11 @@ static int qca_serdev_probe(struct
>> serdev_device *serdev)
>> return err;
>> }
>> } else {
>> - qcadev->btsoc_type = QCA_ROME;
>> + if (data)
>> + qcadev->btsoc_type = data->soc_type;
>> + else
>> + qcadev->btsoc_type = QCA_ROME;
>> +
>> qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
>> GPIOD_OUT_LOW);
>> if (!qcadev->bt_en) {
>> @@ -2044,21 +2060,37 @@ static int __maybe_unused qca_resume(struct
>> device *dev)
>>
>> static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
>>
>> +#ifdef CONFIG_OF
>> static const struct of_device_id qca_bluetooth_of_match[] = {
>> { .compatible = "qcom,qca6174-bt" },
>> + { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
>> { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
>> { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
>> { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
>> { /* sentinel */ }
>> };
>> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
>> +#endif
>> +
>> +#ifdef CONFIG_ACPI
>> +static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
>> + { "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
>> +#endif
>> +
>>
>> static struct serdev_device_driver qca_serdev_driver = {
>> .probe = qca_serdev_probe,
>> .remove = qca_serdev_remove,
>> .driver = {
>> .name = "hci_uart_qca",
>> - .of_match_table = qca_bluetooth_of_match,
>> + .of_match_table = of_match_ptr(qca_bluetooth_of_match),
>> + .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
>> .pm = &qca_pm_ops,
>> },
>> };
^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <20200314094328.3331-2-rjliao@codeaurora.org>]
* Re: [PATCH v1 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390
[not found] ` <20200314094328.3331-2-rjliao@codeaurora.org>
@ 2020-03-16 15:07 ` bgodavar
2020-03-23 1:55 ` Rocky Liao
0 siblings, 1 reply; 10+ messages in thread
From: bgodavar @ 2020-03-16 15:07 UTC (permalink / raw)
To: Rocky Liao
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth,
linux-arm-msm, c-hbandi, hemantg, mka
On 2020-03-14 15:13, Rocky Liao wrote:
> This patch adds compatible string for the QCA chip QCA6390.
>
> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
> ---
> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git
> a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> index beca6466d59a..badf597c0e58 100644
> --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> @@ -13,6 +13,7 @@ Required properties:
> * "qcom,wcn3990-bt"
> * "qcom,wcn3991-bt"
> * "qcom,wcn3998-bt"
> + * "qcom,qca6390-bt"
>
[Bala]: Can you add a example snippet of QCA6390 dts
> Optional properties for compatible string qcom,qca6174-bt:
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v1 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390
2020-03-16 15:07 ` [PATCH v1 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390 bgodavar
@ 2020-03-23 1:55 ` Rocky Liao
0 siblings, 0 replies; 10+ messages in thread
From: Rocky Liao @ 2020-03-23 1:55 UTC (permalink / raw)
To: bgodavar
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth,
linux-arm-msm, c-hbandi, hemantg, mka
在 2020-03-16 23:07，bgodavar@codeaurora.org 写道：
> On 2020-03-14 15:13, Rocky Liao wrote:
>> This patch adds compatible string for the QCA chip QCA6390.
>>
>> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
>> ---
>> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
>> b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
>> index beca6466d59a..badf597c0e58 100644
>> --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
>> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
>> @@ -13,6 +13,7 @@ Required properties:
>> * "qcom,wcn3990-bt"
>> * "qcom,wcn3991-bt"
>> * "qcom,wcn3998-bt"
>> + * "qcom,qca6390-bt"
>>
>
> [Bala]: Can you add a example snippet of QCA6390 dts
>
QCA6390 sample is same with qca6174.
>> Optional properties for compatible string qcom,qca6174-bt:
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
[not found] <20200314094328.3331-1-rjliao@codeaurora.org>
2020-03-16 15:04 ` [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390 bgodavar
[not found] ` <20200314094328.3331-2-rjliao@codeaurora.org>
@ 2020-03-16 17:46 ` Matthias Kaehlcke
2020-03-23 1:51 ` Rocky Liao
2020-03-25 2:26 ` [PATCH v2 " Rocky Liao
3 siblings, 1 reply; 10+ messages in thread
From: Matthias Kaehlcke @ 2020-03-16 17:46 UTC (permalink / raw)
To: Rocky Liao
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth,
linux-arm-msm, bgodavar, c-hbandi, hemantg
On Sat, Mar 14, 2020 at 05:43:27PM +0800, Rocky Liao wrote:
> This patch adds support for QCA6390, including the devicetree and acpi
> compatible hwid matching, and patch/nvm downloading.
>
> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
> ---
> drivers/bluetooth/btqca.c | 44 +++++++++++++++++++++++++++++++----
> drivers/bluetooth/btqca.h | 8 +++++++
> drivers/bluetooth/hci_qca.c | 46 +++++++++++++++++++++++++++++++------
> 3 files changed, 86 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index a16845c0751d..ca126e499c58 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -14,6 +14,9 @@
>
> #define VERSION "0.1"
>
> +#define QCA_IS_3991_6390(soc_type) \
> + (soc_type == QCA_WCN3991 || soc_type == QCA_QCA6390)
This macro style is 3991 or 6390 is pretty ugly, IMO it's worse than the
problem it intends to solve.
I would either just spell out what the macro does, or if that becomes to
cumbersome (especially when more types are added) have a macro that checks
a bitmask like:
qca_soc_type_matches(soc_type, QCA_WCN3991 | QCA6390)
For this the SoC types read from FW would have to be mapped to a bit for
each SoC type, which could be done during initialization.
Another alternative could be to have a set of flags that indicate if a SoC
has certain characteristics (e.g. enhanced logging needs to be enabled),
these flags could be set during initialization.
> +
> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> enum qca_btsoc_type soc_type)
> {
> @@ -32,7 +35,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> * VSE event. WCN3991 sends version command response as a payload to
> * command complete event.
> */
> - if (soc_type == QCA_WCN3991) {
> + if (QCA_IS_3991_6390(soc_type)) {
> event_type = 0;
> rlen += 1;
> rtype = EDL_PATCH_VER_REQ_CMD;
> @@ -69,7 +72,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> goto out;
> }
>
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> memmove(&edl->data, &edl->data[1], sizeof(*ver));
>
> ver = (struct qca_btsoc_version *)(edl->data);
> @@ -138,6 +141,29 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
> }
> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>
> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
> +{
> + struct sk_buff *skb;
> + int err;
> + const u8 param[2] = {0x14, 0x01};
> +
> + bt_dev_dbg(hdev, "QCA enhanced log enable cmd");
> +
> + skb = __hci_cmd_sync_ev(hdev, QCA_ENHANCED_LOG_ENABLE_CMD, 2,
> + param, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
> +
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Enhanced log enable cmd failed (%d)", err);
> + return err;
> + }
> +
> + kfree_skb(skb);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(qca_send_enhancelog_enable_cmd);
> +
> static void qca_tlv_check_data(struct qca_fw_config *config,
> const struct firmware *fw, enum qca_btsoc_type soc_type)
> {
> @@ -217,7 +243,7 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
> tlv_nvm->data[0] |= 0x80;
>
> /* UART Baud Rate */
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> tlv_nvm->data[1] = nvm_baud_rate;
> else
> tlv_nvm->data[2] = nvm_baud_rate;
> @@ -268,7 +294,7 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
> * VSE event. WCN3991 sends version command response as a payload to
> * command complete event.
> */
> - if (soc_type == QCA_WCN3991) {
> + if (QCA_IS_3991_6390(soc_type)) {
> event_type = 0;
> rlen = sizeof(*edl);
> rtype = EDL_PATCH_TLV_REQ_CMD;
> @@ -301,7 +327,7 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
> err = -EIO;
> }
>
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> goto out;
>
> tlv_resp = (struct tlv_seg_resp *)(edl->data);
> @@ -442,6 +468,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> (soc_ver & 0x0000000f);
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crbtfw%02x.tlv", rom_ver);
> + } else if (soc_type == QCA_QCA6390) {
> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
> + (soc_ver & 0x0000000f);
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/htbtfw%02x.tlv", rom_ver);
> } else {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/rampatch_%08x.bin", soc_ver);
> @@ -464,6 +495,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> else if (qca_is_wcn399x(soc_type))
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crnv%02x.bin", rom_ver);
> + else if (soc_type == QCA_QCA6390)
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/htnv%02x.bin", rom_ver);
> else
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/nvm_%08x.bin", soc_ver);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index e16a4d650597..bc703817c3d7 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -14,6 +14,7 @@
> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
> #define MAX_SIZE_PER_TLV_SEGMENT (243)
> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
> +#define QCA_ENHANCED_LOG_ENABLE_CMD (0xFC17)
>
> #define EDL_CMD_REQ_RES_EVT (0x00)
> #define EDL_PATCH_VER_RES_EVT (0x19)
> @@ -127,6 +128,7 @@ enum qca_btsoc_type {
> QCA_WCN3990,
> QCA_WCN3991,
> QCA_WCN3998,
> + QCA_QCA6390,
QCA_QCAxxxx seems a bit redundant, why not call it QCA_6390 or QCA6390?
I also wouldn't be opposed to scrap the QCA_ prefixes from the WCN399x
types, this is the QCA Bluetooth driver, so it's pretty evident that
these are Qualcomm chips.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
2020-03-16 17:46 ` [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390 Matthias Kaehlcke
@ 2020-03-23 1:51 ` Rocky Liao
0 siblings, 0 replies; 10+ messages in thread
From: Rocky Liao @ 2020-03-23 1:51 UTC (permalink / raw)
To: Matthias Kaehlcke
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth,
linux-arm-msm, bgodavar, c-hbandi, hemantg, linux-bluetooth-owner
在 2020-03-17 01:46，Matthias Kaehlcke 写道：
> On Sat, Mar 14, 2020 at 05:43:27PM +0800, Rocky Liao wrote:
>> This patch adds support for QCA6390, including the devicetree and acpi
>> compatible hwid matching, and patch/nvm downloading.
>>
>> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c | 44 +++++++++++++++++++++++++++++++----
>> drivers/bluetooth/btqca.h | 8 +++++++
>> drivers/bluetooth/hci_qca.c | 46
>> +++++++++++++++++++++++++++++++------
>> 3 files changed, 86 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index a16845c0751d..ca126e499c58 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -14,6 +14,9 @@
>>
>> #define VERSION "0.1"
>>
>> +#define QCA_IS_3991_6390(soc_type) \
>> + (soc_type == QCA_WCN3991 || soc_type == QCA_QCA6390)
>
> This macro style is 3991 or 6390 is pretty ugly, IMO it's worse than
> the
> problem it intends to solve.
>
> I would either just spell out what the macro does, or if that becomes
> to
> cumbersome (especially when more types are added) have a macro that
> checks
> a bitmask like:
>
> qca_soc_type_matches(soc_type, QCA_WCN3991 | QCA6390)
>
> For this the SoC types read from FW would have to be mapped to a bit
> for
> each SoC type, which could be done during initialization.
>
> Another alternative could be to have a set of flags that indicate if a
> SoC
> has certain characteristics (e.g. enhanced logging needs to be
> enabled),
> these flags could be set during initialization.
>
I prefer to adopt Bala's suggestion to use soc_type >= QCA_WCN3991
>> +
>> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> enum qca_btsoc_type soc_type)
>> {
>> @@ -32,7 +35,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> * VSE event. WCN3991 sends version command response as a payload to
>> * command complete event.
>> */
>> - if (soc_type == QCA_WCN3991) {
>> + if (QCA_IS_3991_6390(soc_type)) {
>> event_type = 0;
>> rlen += 1;
>> rtype = EDL_PATCH_VER_REQ_CMD;
>> @@ -69,7 +72,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> goto out;
>> }
>>
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> memmove(&edl->data, &edl->data[1], sizeof(*ver));
>>
>> ver = (struct qca_btsoc_version *)(edl->data);
>> @@ -138,6 +141,29 @@ int qca_send_pre_shutdown_cmd(struct hci_dev
>> *hdev)
>> }
>> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>>
>> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
>> +{
>> + struct sk_buff *skb;
>> + int err;
>> + const u8 param[2] = {0x14, 0x01};
>> +
>> + bt_dev_dbg(hdev, "QCA enhanced log enable cmd");
>> +
>> + skb = __hci_cmd_sync_ev(hdev, QCA_ENHANCED_LOG_ENABLE_CMD, 2,
>> + param, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
>> +
>> + if (IS_ERR(skb)) {
>> + err = PTR_ERR(skb);
>> + bt_dev_err(hdev, "Enhanced log enable cmd failed (%d)", err);
>> + return err;
>> + }
>> +
>> + kfree_skb(skb);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(qca_send_enhancelog_enable_cmd);
>> +
>> static void qca_tlv_check_data(struct qca_fw_config *config,
>> const struct firmware *fw, enum qca_btsoc_type soc_type)
>> {
>> @@ -217,7 +243,7 @@ static void qca_tlv_check_data(struct
>> qca_fw_config *config,
>> tlv_nvm->data[0] |= 0x80;
>>
>> /* UART Baud Rate */
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> tlv_nvm->data[1] = nvm_baud_rate;
>> else
>> tlv_nvm->data[2] = nvm_baud_rate;
>> @@ -268,7 +294,7 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> * VSE event. WCN3991 sends version command response as a payload to
>> * command complete event.
>> */
>> - if (soc_type == QCA_WCN3991) {
>> + if (QCA_IS_3991_6390(soc_type)) {
>> event_type = 0;
>> rlen = sizeof(*edl);
>> rtype = EDL_PATCH_TLV_REQ_CMD;
>> @@ -301,7 +327,7 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> err = -EIO;
>> }
>>
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> goto out;
>>
>> tlv_resp = (struct tlv_seg_resp *)(edl->data);
>> @@ -442,6 +468,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> (soc_ver & 0x0000000f);
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/crbtfw%02x.tlv", rom_ver);
>> + } else if (soc_type == QCA_QCA6390) {
>> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
>> + (soc_ver & 0x0000000f);
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/htbtfw%02x.tlv", rom_ver);
>> } else {
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/rampatch_%08x.bin", soc_ver);
>> @@ -464,6 +495,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> else if (qca_is_wcn399x(soc_type))
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/crnv%02x.bin", rom_ver);
>> + else if (soc_type == QCA_QCA6390)
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/htnv%02x.bin", rom_ver);
>> else
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/nvm_%08x.bin", soc_ver);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index e16a4d650597..bc703817c3d7 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -14,6 +14,7 @@
>> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
>> #define MAX_SIZE_PER_TLV_SEGMENT (243)
>> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
>> +#define QCA_ENHANCED_LOG_ENABLE_CMD (0xFC17)
>>
>> #define EDL_CMD_REQ_RES_EVT (0x00)
>> #define EDL_PATCH_VER_RES_EVT (0x19)
>> @@ -127,6 +128,7 @@ enum qca_btsoc_type {
>> QCA_WCN3990,
>> QCA_WCN3991,
>> QCA_WCN3998,
>> + QCA_QCA6390,
>
> QCA_QCAxxxx seems a bit redundant, why not call it QCA_6390 or QCA6390?
> I also wouldn't be opposed to scrap the QCA_ prefixes from the WCN399x
> types, this is the QCA Bluetooth driver, so it's pretty evident that
> these are Qualcomm chips.
I would like to do this in a separate patch.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
[not found] <20200314094328.3331-1-rjliao@codeaurora.org>
` (2 preceding siblings ...)
2020-03-16 17:46 ` [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390 Matthias Kaehlcke
@ 2020-03-25 2:26 ` Rocky Liao
2020-03-25 2:26 ` [PATCH v2 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390 Rocky Liao
2020-03-30 21:18 ` [PATCH v2 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390 Marcel Holtmann
3 siblings, 2 replies; 10+ messages in thread
From: Rocky Liao @ 2020-03-25 2:26 UTC (permalink / raw)
To: robh+dt, mark.rutland, marcel, johan.hedberg, thierry.escande
Cc: netdev, devicetree, linux-kernel, linux-bluetooth, linux-arm-msm,
bgodavar, c-hbandi, hemantg, mka, Rocky Liao
This patch adds support for QCA6390, including the devicetree and acpi
compatible hwid matching, and patch/nvm downloading.
Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
---
Changes in v2:
-removed the use of macro QCA_IS_3991_6390
-removed the qca_send_enhancelog_enable_cmd()
drivers/bluetooth/btqca.c | 18 ++++++++++++-----
drivers/bluetooth/btqca.h | 3 ++-
drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++++++-------
3 files changed, 48 insertions(+), 13 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index a16845c0751d..3ea866d44568 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -32,7 +32,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
* VSE event. WCN3991 sends version command response as a payload to
* command complete event.
*/
- if (soc_type == QCA_WCN3991) {
+ if (soc_type >= QCA_WCN3991) {
event_type = 0;
rlen += 1;
rtype = EDL_PATCH_VER_REQ_CMD;
@@ -69,7 +69,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
goto out;
}
- if (soc_type == QCA_WCN3991)
+ if (soc_type >= QCA_WCN3991)
memmove(&edl->data, &edl->data[1], sizeof(*ver));
ver = (struct qca_btsoc_version *)(edl->data);
@@ -217,7 +217,7 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
tlv_nvm->data[0] |= 0x80;
/* UART Baud Rate */
- if (soc_type == QCA_WCN3991)
+ if (soc_type >= QCA_WCN3991)
tlv_nvm->data[1] = nvm_baud_rate;
else
tlv_nvm->data[2] = nvm_baud_rate;
@@ -268,7 +268,7 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
* VSE event. WCN3991 sends version command response as a payload to
* command complete event.
*/
- if (soc_type == QCA_WCN3991) {
+ if (soc_type >= QCA_WCN3991) {
event_type = 0;
rlen = sizeof(*edl);
rtype = EDL_PATCH_TLV_REQ_CMD;
@@ -301,7 +301,7 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
err = -EIO;
}
- if (soc_type == QCA_WCN3991)
+ if (soc_type >= QCA_WCN3991)
goto out;
tlv_resp = (struct tlv_seg_resp *)(edl->data);
@@ -442,6 +442,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
(soc_ver & 0x0000000f);
snprintf(config.fwname, sizeof(config.fwname),
"qca/crbtfw%02x.tlv", rom_ver);
+ } else if (soc_type == QCA_QCA6390) {
+ rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
+ (soc_ver & 0x0000000f);
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/htbtfw%02x.tlv", rom_ver);
} else {
snprintf(config.fwname, sizeof(config.fwname),
"qca/rampatch_%08x.bin", soc_ver);
@@ -464,6 +469,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
else if (qca_is_wcn399x(soc_type))
snprintf(config.fwname, sizeof(config.fwname),
"qca/crnv%02x.bin", rom_ver);
+ else if (soc_type == QCA_QCA6390)
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/htnv%02x.bin", rom_ver);
else
snprintf(config.fwname, sizeof(config.fwname),
"qca/nvm_%08x.bin", soc_ver);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index e16a4d650597..6e1e62dd4b95 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -125,8 +125,9 @@ enum qca_btsoc_type {
QCA_AR3002,
QCA_ROME,
QCA_WCN3990,
- QCA_WCN3991,
QCA_WCN3998,
+ QCA_WCN3991,
+ QCA_QCA6390,
};
#if IS_ENABLED(CONFIG_BT_QCA)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 439392b1c043..d0ac554584a4 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -26,6 +26,7 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/acpi.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/serdev.h>
@@ -1596,7 +1597,7 @@ static int qca_setup(struct hci_uart *hu)
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
bt_dev_info(hdev, "setting up %s",
- qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
+ qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");
retry:
ret = qca_power_on(hdev);
@@ -1665,10 +1666,10 @@ static int qca_setup(struct hci_uart *hu)
}
/* Setup bdaddr */
- if (qca_is_wcn399x(soc_type))
- hu->hdev->set_bdaddr = qca_set_bdaddr;
- else
+ if (soc_type == QCA_ROME)
hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+ else
+ hu->hdev->set_bdaddr = qca_set_bdaddr;
return ret;
}
@@ -1721,6 +1722,11 @@ static const struct qca_vreg_data qca_soc_data_wcn3998 = {
.num_vregs = 4,
};
+static const struct qca_vreg_data qca_soc_data_qca6390 = {
+ .soc_type = QCA_QCA6390,
+ .num_vregs = 0,
+};
+
static void qca_power_shutdown(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
@@ -1764,7 +1770,7 @@ static int qca_power_off(struct hci_dev *hdev)
enum qca_btsoc_type soc_type = qca_soc_type(hu);
/* Stop sending shutdown command if soc crashes. */
- if (qca_is_wcn399x(soc_type)
+ if (soc_type != QCA_ROME
&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
qca_send_pre_shutdown_cmd(hdev);
usleep_range(8000, 10000);
@@ -1900,7 +1906,11 @@ static int qca_serdev_probe(struct serdev_device *serdev)
return err;
}
} else {
- qcadev->btsoc_type = QCA_ROME;
+ if (data)
+ qcadev->btsoc_type = data->soc_type;
+ else
+ qcadev->btsoc_type = QCA_ROME;
+
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
if (!qcadev->bt_en) {
@@ -2044,21 +2054,37 @@ static int __maybe_unused qca_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
+#ifdef CONFIG_OF
static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,qca6174-bt" },
+ { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
+ { "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+ { "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+ { "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+ { "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
+#endif
+
static struct serdev_device_driver qca_serdev_driver = {
.probe = qca_serdev_probe,
.remove = qca_serdev_remove,
.driver = {
.name = "hci_uart_qca",
- .of_match_table = qca_bluetooth_of_match,
+ .of_match_table = of_match_ptr(qca_bluetooth_of_match),
+ .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
.pm = &qca_pm_ops,
},
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v2 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390
2020-03-25 2:26 ` [PATCH v2 " Rocky Liao
@ 2020-03-25 2:26 ` Rocky Liao
2020-03-30 21:18 ` Marcel Holtmann
2020-03-30 21:18 ` [PATCH v2 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390 Marcel Holtmann
1 sibling, 1 reply; 10+ messages in thread
From: Rocky Liao @ 2020-03-25 2:26 UTC (permalink / raw)
To: robh+dt, mark.rutland, marcel, johan.hedberg, thierry.escande
Cc: netdev, devicetree, linux-kernel, linux-bluetooth, linux-arm-msm,
bgodavar, c-hbandi, hemantg, mka, Rocky Liao
This patch adds compatible string for the QCA chip QCA6390.
Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
---
Changes in v2: None
Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
index beca6466d59a..badf597c0e58 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -13,6 +13,7 @@ Required properties:
* "qcom,wcn3990-bt"
* "qcom,wcn3991-bt"
* "qcom,wcn3998-bt"
+ * "qcom,qca6390-bt"
Optional properties for compatible string qcom,qca6174-bt:
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v2 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390
2020-03-25 2:26 ` [PATCH v2 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390 Rocky Liao
@ 2020-03-30 21:18 ` Marcel Holtmann
0 siblings, 0 replies; 10+ messages in thread
From: Marcel Holtmann @ 2020-03-30 21:18 UTC (permalink / raw)
To: Rocky Liao
Cc: robh+dt, mark.rutland, Johan Hedberg, thierry.escande, netdev,
devicetree, LKML, linux-bluetooth, linux-arm-msm, bgodavar,
c-hbandi, hemantg, mka
Hi Rocky,
> This patch adds compatible string for the QCA chip QCA6390.
>
> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
> ---
>
> Changes in v2: None
>
> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 1 +
> 1 file changed, 1 insertion(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
2020-03-25 2:26 ` [PATCH v2 " Rocky Liao
2020-03-25 2:26 ` [PATCH v2 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390 Rocky Liao
@ 2020-03-30 21:18 ` Marcel Holtmann
1 sibling, 0 replies; 10+ messages in thread
From: Marcel Holtmann @ 2020-03-30 21:18 UTC (permalink / raw)
To: Rocky Liao
Cc: robh+dt, mark.rutland, Johan Hedberg, thierry.escande, netdev,
devicetree, LKML, Bluetooth Kernel Mailing List, MSM,
Balakrishna Godavarthi, c-hbandi, Hemantg, mka
Hi Rocky,
> This patch adds support for QCA6390, including the devicetree and acpi
> compatible hwid matching, and patch/nvm downloading.
>
> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
> ---
>
> Changes in v2:
> -removed the use of macro QCA_IS_3991_6390
> -removed the qca_send_enhancelog_enable_cmd()
>
> drivers/bluetooth/btqca.c | 18 ++++++++++++-----
> drivers/bluetooth/btqca.h | 3 ++-
> drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++++++-------
> 3 files changed, 48 insertions(+), 13 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 10+ messages in thread