* [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL
@ 2004-06-24 8:48 noreply
0 siblings, 0 replies; 8+ messages in thread
From: noreply @ 2004-06-24 8:48 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000320
======================================================================
Reported By: Voluspa
Assigned To:
======================================================================
Project: ALSA - driver
Bug ID: 320
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Homebrew
Kernel Version: 2.6.6
======================================================================
Date Submitted: 06-01-2004 10:12 CEST
Last Modified: 06-24-2004 10:48 CEST
======================================================================
Summary: FL is FL+FR and FR is FR+FL
Description:
Card: Sound Blaster Live!
Chip: SigmaTel STAC9758/59
Between 1.0.5rc1 and 1.0.5a the Front Left and Front Right signals are
combined, which creates real crappy sound:
Front Left speaker = Front Left + Front Right
Front Right speaker = Front Right + Front Left
Checking the new "Surround Mix" in alsamixer gets even more confusing:
Front Left speaker = Front Left + Front Right + Center
Front Right speaker = Front Right + Front Left + LFE
There are no differences between the 1.0.5rc1 and 1.0.5a in the
proc/asound/card0/codec97#0/ac97#0-0+regs
Btw, the alsamixer options are getting really out of hand...
Eg a new option called just "Front" (I keep it off since I can't hear any
difference).
Mvh
Mats Johannesson
======================================================================
----------------------------------------------------------------------
pzad - 06-08-2004 08:40 CEST
----------------------------------------------------------------------
I think this AC97 codec problem.
----------------------------------------------------------------------
pzad - 06-23-2004 15:21 CEST
----------------------------------------------------------------------
Could you attach asound.state or amixer output.
And I think, that ac97 register were changed, but there are not in proc
output, because these are in diffrent pages.
----------------------------------------------------------------------
Voluspa - 06-24-2004 10:48 CEST
----------------------------------------------------------------------
OK, rechecked and the /proc-registers are set the same in 1.0.5rc1 and
1.0.5a. Installed 1.0.5a without loading the rc1 asound.state, and
handcrafted a new with alsamixer. Having set all options equal to rc1, the
asound.state file indeed shows some differences.
Uploading asound.state-1.0.5rc1, asound.state-1.0.5a and the diff
asound.state-diff-1.0.5rc1-1.0.5a
Bug History
Date Modified Username Field Change
======================================================================
06-01-04 10:12 Voluspa New Bug
06-01-04 10:12 Voluspa Distribution => Homebrew
06-01-04 10:12 Voluspa Kernel Version => 2.6.6
06-08-04 08:40 pzad Bugnote Added: 0001294
06-23-04 15:21 pzad Bugnote Added: 0001335
06-24-04 10:47 Voluspa File Added: asound.state-1.0.5rc1
06-24-04 10:48 Voluspa Bugnote Added: 0001336
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL
@ 2004-09-24 11:32 bugtrack
0 siblings, 0 replies; 8+ messages in thread
From: bugtrack @ 2004-09-24 11:32 UTC (permalink / raw)
To: alsa-devel
The following bug has been CLOSED
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000320
======================================================================
Reported By: Voluspa
Assigned To: pzad
======================================================================
Project: ALSA - driver
Bug ID: 320
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: closed
Distribution: Homebrew
Kernel Version: 2.6.6
======================================================================
Date Submitted: 06-01-2004 10:12 CEST
Last Modified: 09-24-2004 13:32 CEST
======================================================================
Summary: FL is FL+FR and FR is FR+FL
Description:
Card: Sound Blaster Live!
Chip: SigmaTel STAC9758/59
Between 1.0.5rc1 and 1.0.5a the Front Left and Front Right signals are
combined, which creates real crappy sound:
Front Left speaker = Front Left + Front Right
Front Right speaker = Front Right + Front Left
Checking the new "Surround Mix" in alsamixer gets even more confusing:
Front Left speaker = Front Left + Front Right + Center
Front Right speaker = Front Right + Front Left + LFE
There are no differences between the 1.0.5rc1 and 1.0.5a in the
proc/asound/card0/codec97#0/ac97#0-0+regs
Btw, the alsamixer options are getting really out of hand...
Eg a new option called just "Front" (I keep it off since I can't hear any
difference).
Mvh
Mats Johannesson
======================================================================
----------------------------------------------------------------------
pzad - 06-08-2004 08:40 CEST
----------------------------------------------------------------------
I think this AC97 codec problem.
----------------------------------------------------------------------
pzad - 06-23-2004 15:21 CEST
----------------------------------------------------------------------
Could you attach asound.state or amixer output.
And I think, that ac97 register were changed, but there are not in proc
output, because these are in diffrent pages.
----------------------------------------------------------------------
Voluspa - 06-24-2004 10:48 CEST
----------------------------------------------------------------------
OK, rechecked and the /proc-registers are set the same in 1.0.5rc1 and
1.0.5a. Installed 1.0.5a without loading the rc1 asound.state, and
handcrafted a new with alsamixer. Having set all options equal to rc1, the
asound.state file indeed shows some differences.
Uploading asound.state-1.0.5rc1, asound.state-1.0.5a and the diff
asound.state-diff-1.0.5rc1-1.0.5a
----------------------------------------------------------------------
pzad - 06-30-2004 09:00 CEST
----------------------------------------------------------------------
Could you try this patch ? It is already in alsa CVS.
http://sourceforge.net/mailarchive/forum.php?thread_id=5027384&forum_id=33141
----------------------------------------------------------------------
Voluspa - 06-30-2004 15:36 CEST
----------------------------------------------------------------------
I'm glad that the code review you did amounted to _some_ kind of bugfix
after
me having sent you on a wild goose chase, Peter. This bug report can be
closed, 'cos it's (probably) no bug at all. Sorry... Here's what
happened:
During the development of the STAC9758/59, I kept alsa-driver-1.0.4
updated
by patching in the relevant file changes (no CVS pulls, just manual
changes).
Last date was May 14. The _perceived_ breakage happened between that date
and
1.0.5rc1 - not 1.0.5a as I believed.
1.0.4 + patches had /proc/asound/card0/codec97#0/ac97#0-0+regs
[...]
0:20 = 2000
0:22 = 0000
The bit in register 20 means "3D EFFECT ENABLED", but the "33" value I
had
set with the alsamixer tool didn't take effect (would show up as 0004 in
register 22).
1.0.5rc1 had /proc/asound/card0/codec97#0/ac97#0-0+regs
[...]
0:20 = 2000
0:22 = 0004
And we see the "LINE_OUT SEPARATION RATIO; (LOW)" of "3D stereo
enhancement
function, SigmaTel Surround 3D (SS3D), built into the AC'97 component".
If mixing Front Left and Front Right signals is part of how a 3D effect
is
achieved, then this is no bug. But using a 5.1 speaker system I can only
say
that the effect sounds terrible... So, in the future I keep "3D Control -
Switch [Off]".
Now using alsa-driver-1.0.5a plus the CVS patch you referred to, and all's
well.
Once again, sorry about the fuzz.
Bug History
Date Modified Username Field Change
======================================================================
06-01-04 10:12 Voluspa New Bug
06-01-04 10:12 Voluspa Distribution => Homebrew
06-01-04 10:12 Voluspa Kernel Version => 2.6.6
06-08-04 08:40 pzad Bugnote Added: 0001294
06-23-04 15:21 pzad Bugnote Added: 0001335
06-24-04 10:47 Voluspa File Added: asound.state-1.0.5rc1
06-24-04 10:48 Voluspa Bugnote Added: 0001336
06-24-04 10:48 Voluspa File Added: asound.state-1.0.5a
06-24-04 10:49 Voluspa File Added: asound.state-diff-1.0.5rc1-1.0.5a
06-28-04 09:14 pzad Assigned To => pzad
06-28-04 09:14 pzad Status new => assigned
06-30-04 09:00 pzad Bugnote Added: 0001348
06-30-04 15:36 Voluspa Bugnote Added: 0001349
07-01-04 09:43 pzad Resolution open => not a bug
07-01-04 09:43 pzad Status assigned => resolved
09-24-04 13:32 tiwai Status resolved => closed
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL
@ 2004-07-01 7:43 noreply
0 siblings, 0 replies; 8+ messages in thread
From: noreply @ 2004-07-01 7:43 UTC (permalink / raw)
To: alsa-devel
The following bug has been RESOLVED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000320
======================================================================
Reported By: Voluspa
Assigned To: pzad
======================================================================
Project: ALSA - driver
Bug ID: 320
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: resolved
Distribution: Homebrew
Kernel Version: 2.6.6
Resolution: not a bug
======================================================================
Date Submitted: 06-01-2004 10:12 CEST
Last Modified: 07-01-2004 09:43 CEST
======================================================================
Summary: FL is FL+FR and FR is FR+FL
Description:
Card: Sound Blaster Live!
Chip: SigmaTel STAC9758/59
Between 1.0.5rc1 and 1.0.5a the Front Left and Front Right signals are
combined, which creates real crappy sound:
Front Left speaker = Front Left + Front Right
Front Right speaker = Front Right + Front Left
Checking the new "Surround Mix" in alsamixer gets even more confusing:
Front Left speaker = Front Left + Front Right + Center
Front Right speaker = Front Right + Front Left + LFE
There are no differences between the 1.0.5rc1 and 1.0.5a in the
proc/asound/card0/codec97#0/ac97#0-0+regs
Btw, the alsamixer options are getting really out of hand...
Eg a new option called just "Front" (I keep it off since I can't hear any
difference).
Mvh
Mats Johannesson
======================================================================
----------------------------------------------------------------------
pzad - 06-08-2004 08:40 CEST
----------------------------------------------------------------------
I think this AC97 codec problem.
----------------------------------------------------------------------
pzad - 06-23-2004 15:21 CEST
----------------------------------------------------------------------
Could you attach asound.state or amixer output.
And I think, that ac97 register were changed, but there are not in proc
output, because these are in diffrent pages.
----------------------------------------------------------------------
Voluspa - 06-24-2004 10:48 CEST
----------------------------------------------------------------------
OK, rechecked and the /proc-registers are set the same in 1.0.5rc1 and
1.0.5a. Installed 1.0.5a without loading the rc1 asound.state, and
handcrafted a new with alsamixer. Having set all options equal to rc1, the
asound.state file indeed shows some differences.
Uploading asound.state-1.0.5rc1, asound.state-1.0.5a and the diff
asound.state-diff-1.0.5rc1-1.0.5a
----------------------------------------------------------------------
pzad - 06-30-2004 09:00 CEST
----------------------------------------------------------------------
Could you try this patch ? It is already in alsa CVS.
http://sourceforge.net/mailarchive/forum.php?thread_id=5027384&forum_id=33141
----------------------------------------------------------------------
Voluspa - 06-30-2004 15:36 CEST
----------------------------------------------------------------------
I'm glad that the code review you did amounted to _some_ kind of bugfix
after
me having sent you on a wild goose chase, Peter. This bug report can be
closed, 'cos it's (probably) no bug at all. Sorry... Here's what
happened:
During the development of the STAC9758/59, I kept alsa-driver-1.0.4
updated
by patching in the relevant file changes (no CVS pulls, just manual
changes).
Last date was May 14. The _perceived_ breakage happened between that date
and
1.0.5rc1 - not 1.0.5a as I believed.
1.0.4 + patches had /proc/asound/card0/codec97#0/ac97#0-0+regs
[...]
0:20 = 2000
0:22 = 0000
The bit in register 20 means "3D EFFECT ENABLED", but the "33" value I
had
set with the alsamixer tool didn't take effect (would show up as 0004 in
register 22).
1.0.5rc1 had /proc/asound/card0/codec97#0/ac97#0-0+regs
[...]
0:20 = 2000
0:22 = 0004
And we see the "LINE_OUT SEPARATION RATIO; (LOW)" of "3D stereo
enhancement
function, SigmaTel Surround 3D (SS3D), built into the AC'97 component".
If mixing Front Left and Front Right signals is part of how a 3D effect
is
achieved, then this is no bug. But using a 5.1 speaker system I can only
say
that the effect sounds terrible... So, in the future I keep "3D Control -
Switch [Off]".
Now using alsa-driver-1.0.5a plus the CVS patch you referred to, and all's
well.
Once again, sorry about the fuzz.
Bug History
Date Modified Username Field Change
======================================================================
06-01-04 10:12 Voluspa New Bug
06-01-04 10:12 Voluspa Distribution => Homebrew
06-01-04 10:12 Voluspa Kernel Version => 2.6.6
06-08-04 08:40 pzad Bugnote Added: 0001294
06-23-04 15:21 pzad Bugnote Added: 0001335
06-24-04 10:47 Voluspa File Added: asound.state-1.0.5rc1
06-24-04 10:48 Voluspa Bugnote Added: 0001336
06-24-04 10:48 Voluspa File Added: asound.state-1.0.5a
06-24-04 10:49 Voluspa File Added: asound.state-diff-1.0.5rc1-1.0.5a
06-28-04 09:14 pzad Assigned To => pzad
06-28-04 09:14 pzad Status new => assigned
06-30-04 09:00 pzad Bugnote Added: 0001348
06-30-04 15:36 Voluspa Bugnote Added: 0001349
07-01-04 09:43 pzad Resolution open => not a bug
07-01-04 09:43 pzad Status assigned => resolved
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 8+ messages in thread* [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL
@ 2004-06-30 13:36 noreply
0 siblings, 0 replies; 8+ messages in thread
From: noreply @ 2004-06-30 13:36 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000320
======================================================================
Reported By: Voluspa
Assigned To: pzad
======================================================================
Project: ALSA - driver
Bug ID: 320
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Homebrew
Kernel Version: 2.6.6
======================================================================
Date Submitted: 06-01-2004 10:12 CEST
Last Modified: 06-30-2004 15:36 CEST
======================================================================
Summary: FL is FL+FR and FR is FR+FL
Description:
Card: Sound Blaster Live!
Chip: SigmaTel STAC9758/59
Between 1.0.5rc1 and 1.0.5a the Front Left and Front Right signals are
combined, which creates real crappy sound:
Front Left speaker = Front Left + Front Right
Front Right speaker = Front Right + Front Left
Checking the new "Surround Mix" in alsamixer gets even more confusing:
Front Left speaker = Front Left + Front Right + Center
Front Right speaker = Front Right + Front Left + LFE
There are no differences between the 1.0.5rc1 and 1.0.5a in the
proc/asound/card0/codec97#0/ac97#0-0+regs
Btw, the alsamixer options are getting really out of hand...
Eg a new option called just "Front" (I keep it off since I can't hear any
difference).
Mvh
Mats Johannesson
======================================================================
----------------------------------------------------------------------
pzad - 06-08-2004 08:40 CEST
----------------------------------------------------------------------
I think this AC97 codec problem.
----------------------------------------------------------------------
pzad - 06-23-2004 15:21 CEST
----------------------------------------------------------------------
Could you attach asound.state or amixer output.
And I think, that ac97 register were changed, but there are not in proc
output, because these are in diffrent pages.
----------------------------------------------------------------------
Voluspa - 06-24-2004 10:48 CEST
----------------------------------------------------------------------
OK, rechecked and the /proc-registers are set the same in 1.0.5rc1 and
1.0.5a. Installed 1.0.5a without loading the rc1 asound.state, and
handcrafted a new with alsamixer. Having set all options equal to rc1, the
asound.state file indeed shows some differences.
Uploading asound.state-1.0.5rc1, asound.state-1.0.5a and the diff
asound.state-diff-1.0.5rc1-1.0.5a
----------------------------------------------------------------------
pzad - 06-30-2004 09:00 CEST
----------------------------------------------------------------------
Could you try this patch ? It is already in alsa CVS.
http://sourceforge.net/mailarchive/forum.php?thread_id=5027384&forum_id=33141
----------------------------------------------------------------------
Voluspa - 06-30-2004 15:36 CEST
----------------------------------------------------------------------
I'm glad that the code review you did amounted to _some_ kind of bugfix
after
me having sent you on a wild goose chase, Peter. This bug report can be
closed, 'cos it's (probably) no bug at all. Sorry... Here's what
happened:
During the development of the STAC9758/59, I kept alsa-driver-1.0.4
updated
by patching in the relevant file changes (no CVS pulls, just manual
changes).
Last date was May 14. The _perceived_ breakage happened between that date
and
1.0.5rc1 - not 1.0.5a as I believed.
1.0.4 + patches had /proc/asound/card0/codec97#0/ac97#0-0+regs
[...]
0:20 = 2000
0:22 = 0000
The bit in register 20 means "3D EFFECT ENABLED", but the "33" value I
had
set with the alsamixer tool didn't take effect (would show up as 0004 in
register 22).
1.0.5rc1 had /proc/asound/card0/codec97#0/ac97#0-0+regs
[...]
0:20 = 2000
0:22 = 0004
And we see the "LINE_OUT SEPARATION RATIO; (LOW)" of "3D stereo
enhancement
function, SigmaTel Surround 3D (SS3D), built into the AC'97 component".
If mixing Front Left and Front Right signals is part of how a 3D effect
is
achieved, then this is no bug. But using a 5.1 speaker system I can only
say
that the effect sounds terrible... So, in the future I keep "3D Control -
Switch [Off]".
Now using alsa-driver-1.0.5a plus the CVS patch you referred to, and all's
well.
Once again, sorry about the fuzz.
Bug History
Date Modified Username Field Change
======================================================================
06-01-04 10:12 Voluspa New Bug
06-01-04 10:12 Voluspa Distribution => Homebrew
06-01-04 10:12 Voluspa Kernel Version => 2.6.6
06-08-04 08:40 pzad Bugnote Added: 0001294
06-23-04 15:21 pzad Bugnote Added: 0001335
06-24-04 10:47 Voluspa File Added: asound.state-1.0.5rc1
06-24-04 10:48 Voluspa Bugnote Added: 0001336
06-24-04 10:48 Voluspa File Added: asound.state-1.0.5a
06-24-04 10:49 Voluspa File Added: asound.state-diff-1.0.5rc1-1.0.5a
06-28-04 09:14 pzad Assigned To => pzad
06-28-04 09:14 pzad Status new => assigned
06-30-04 09:00 pzad Bugnote Added: 0001348
06-30-04 15:36 Voluspa Bugnote Added: 0001349
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 8+ messages in thread* [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL
@ 2004-06-30 7:00 noreply
0 siblings, 0 replies; 8+ messages in thread
From: noreply @ 2004-06-30 7:00 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000320
======================================================================
Reported By: Voluspa
Assigned To: pzad
======================================================================
Project: ALSA - driver
Bug ID: 320
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Homebrew
Kernel Version: 2.6.6
======================================================================
Date Submitted: 06-01-2004 10:12 CEST
Last Modified: 06-30-2004 09:00 CEST
======================================================================
Summary: FL is FL+FR and FR is FR+FL
Description:
Card: Sound Blaster Live!
Chip: SigmaTel STAC9758/59
Between 1.0.5rc1 and 1.0.5a the Front Left and Front Right signals are
combined, which creates real crappy sound:
Front Left speaker = Front Left + Front Right
Front Right speaker = Front Right + Front Left
Checking the new "Surround Mix" in alsamixer gets even more confusing:
Front Left speaker = Front Left + Front Right + Center
Front Right speaker = Front Right + Front Left + LFE
There are no differences between the 1.0.5rc1 and 1.0.5a in the
proc/asound/card0/codec97#0/ac97#0-0+regs
Btw, the alsamixer options are getting really out of hand...
Eg a new option called just "Front" (I keep it off since I can't hear any
difference).
Mvh
Mats Johannesson
======================================================================
----------------------------------------------------------------------
pzad - 06-08-2004 08:40 CEST
----------------------------------------------------------------------
I think this AC97 codec problem.
----------------------------------------------------------------------
pzad - 06-23-2004 15:21 CEST
----------------------------------------------------------------------
Could you attach asound.state or amixer output.
And I think, that ac97 register were changed, but there are not in proc
output, because these are in diffrent pages.
----------------------------------------------------------------------
Voluspa - 06-24-2004 10:48 CEST
----------------------------------------------------------------------
OK, rechecked and the /proc-registers are set the same in 1.0.5rc1 and
1.0.5a. Installed 1.0.5a without loading the rc1 asound.state, and
handcrafted a new with alsamixer. Having set all options equal to rc1, the
asound.state file indeed shows some differences.
Uploading asound.state-1.0.5rc1, asound.state-1.0.5a and the diff
asound.state-diff-1.0.5rc1-1.0.5a
----------------------------------------------------------------------
pzad - 06-30-2004 09:00 CEST
----------------------------------------------------------------------
Could you try this patch ? It is already in alsa CVS.
http://sourceforge.net/mailarchive/forum.php?thread_id=5027384&forum_id=33141
Bug History
Date Modified Username Field Change
======================================================================
06-01-04 10:12 Voluspa New Bug
06-01-04 10:12 Voluspa Distribution => Homebrew
06-01-04 10:12 Voluspa Kernel Version => 2.6.6
06-08-04 08:40 pzad Bugnote Added: 0001294
06-23-04 15:21 pzad Bugnote Added: 0001335
06-24-04 10:47 Voluspa File Added: asound.state-1.0.5rc1
06-24-04 10:48 Voluspa Bugnote Added: 0001336
06-24-04 10:48 Voluspa File Added: asound.state-1.0.5a
06-24-04 10:49 Voluspa File Added: asound.state-diff-1.0.5rc1-1.0.5a
06-28-04 09:14 pzad Assigned To => pzad
06-28-04 09:14 pzad Status new => assigned
06-30-04 09:00 pzad Bugnote Added: 0001348
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 8+ messages in thread* [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL
@ 2004-06-28 7:14 noreply
0 siblings, 0 replies; 8+ messages in thread
From: noreply @ 2004-06-28 7:14 UTC (permalink / raw)
To: alsa-devel
The following bug has been ASSIGNED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000320
======================================================================
Reported By: Voluspa
Assigned To: pzad
======================================================================
Project: ALSA - driver
Bug ID: 320
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Homebrew
Kernel Version: 2.6.6
======================================================================
Date Submitted: 06-01-2004 10:12 CEST
Last Modified: 06-28-2004 09:14 CEST
======================================================================
Summary: FL is FL+FR and FR is FR+FL
Description:
Card: Sound Blaster Live!
Chip: SigmaTel STAC9758/59
Between 1.0.5rc1 and 1.0.5a the Front Left and Front Right signals are
combined, which creates real crappy sound:
Front Left speaker = Front Left + Front Right
Front Right speaker = Front Right + Front Left
Checking the new "Surround Mix" in alsamixer gets even more confusing:
Front Left speaker = Front Left + Front Right + Center
Front Right speaker = Front Right + Front Left + LFE
There are no differences between the 1.0.5rc1 and 1.0.5a in the
proc/asound/card0/codec97#0/ac97#0-0+regs
Btw, the alsamixer options are getting really out of hand...
Eg a new option called just "Front" (I keep it off since I can't hear any
difference).
Mvh
Mats Johannesson
======================================================================
----------------------------------------------------------------------
pzad - 06-08-2004 08:40 CEST
----------------------------------------------------------------------
I think this AC97 codec problem.
----------------------------------------------------------------------
pzad - 06-23-2004 15:21 CEST
----------------------------------------------------------------------
Could you attach asound.state or amixer output.
And I think, that ac97 register were changed, but there are not in proc
output, because these are in diffrent pages.
----------------------------------------------------------------------
Voluspa - 06-24-2004 10:48 CEST
----------------------------------------------------------------------
OK, rechecked and the /proc-registers are set the same in 1.0.5rc1 and
1.0.5a. Installed 1.0.5a without loading the rc1 asound.state, and
handcrafted a new with alsamixer. Having set all options equal to rc1, the
asound.state file indeed shows some differences.
Uploading asound.state-1.0.5rc1, asound.state-1.0.5a and the diff
asound.state-diff-1.0.5rc1-1.0.5a
Bug History
Date Modified Username Field Change
======================================================================
06-01-04 10:12 Voluspa New Bug
06-01-04 10:12 Voluspa Distribution => Homebrew
06-01-04 10:12 Voluspa Kernel Version => 2.6.6
06-08-04 08:40 pzad Bugnote Added: 0001294
06-23-04 15:21 pzad Bugnote Added: 0001335
06-24-04 10:47 Voluspa File Added: asound.state-1.0.5rc1
06-24-04 10:48 Voluspa Bugnote Added: 0001336
06-24-04 10:48 Voluspa File Added: asound.state-1.0.5a
06-24-04 10:49 Voluspa File Added: asound.state-diff-1.0.5rc1-1.0.5a
06-28-04 09:14 pzad Assigned To => pzad
06-28-04 09:14 pzad Status new => assigned
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 8+ messages in thread* [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL
@ 2004-06-23 13:21 noreply
0 siblings, 0 replies; 8+ messages in thread
From: noreply @ 2004-06-23 13:21 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000320
======================================================================
Reported By: Voluspa
Assigned To:
======================================================================
Project: ALSA - driver
Bug ID: 320
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Homebrew
Kernel Version: 2.6.6
======================================================================
Date Submitted: 06-01-2004 10:12 CEST
Last Modified: 06-23-2004 15:21 CEST
======================================================================
Summary: FL is FL+FR and FR is FR+FL
Description:
Card: Sound Blaster Live!
Chip: SigmaTel STAC9758/59
Between 1.0.5rc1 and 1.0.5a the Front Left and Front Right signals are
combined, which creates real crappy sound:
Front Left speaker = Front Left + Front Right
Front Right speaker = Front Right + Front Left
Checking the new "Surround Mix" in alsamixer gets even more confusing:
Front Left speaker = Front Left + Front Right + Center
Front Right speaker = Front Right + Front Left + LFE
There are no differences between the 1.0.5rc1 and 1.0.5a in the
proc/asound/card0/codec97#0/ac97#0-0+regs
Btw, the alsamixer options are getting really out of hand...
Eg a new option called just "Front" (I keep it off since I can't hear any
difference).
Mvh
Mats Johannesson
======================================================================
----------------------------------------------------------------------
pzad - 06-08-2004 08:40 CEST
----------------------------------------------------------------------
I think this AC97 codec problem.
----------------------------------------------------------------------
pzad - 06-23-2004 15:21 CEST
----------------------------------------------------------------------
Could you attach asound.state or amixer output.
And I think, that ac97 register were changed, but there are not in proc
output, because these are in diffrent pages.
Bug History
Date Modified Username Field Change
======================================================================
06-01-04 10:12 Voluspa New Bug
06-01-04 10:12 Voluspa Distribution => Homebrew
06-01-04 10:12 Voluspa Kernel Version => 2.6.6
06-08-04 08:40 pzad Bugnote Added: 0001294
06-23-04 15:21 pzad Bugnote Added: 0001335
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL
@ 2004-06-08 6:40 noreply
0 siblings, 0 replies; 8+ messages in thread
From: noreply @ 2004-06-08 6:40 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000320
======================================================================
Reported By: Voluspa
Assigned To:
======================================================================
Project: ALSA - driver
Bug ID: 320
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Homebrew
Kernel Version: 2.6.6
======================================================================
Date Submitted: 06-01-2004 10:12 CEST
Last Modified: 06-08-2004 08:40 CEST
======================================================================
Summary: FL is FL+FR and FR is FR+FL
Description:
Card: Sound Blaster Live!
Chip: SigmaTel STAC9758/59
Between 1.0.5rc1 and 1.0.5a the Front Left and Front Right signals are
combined, which creates real crappy sound:
Front Left speaker = Front Left + Front Right
Front Right speaker = Front Right + Front Left
Checking the new "Surround Mix" in alsamixer gets even more confusing:
Front Left speaker = Front Left + Front Right + Center
Front Right speaker = Front Right + Front Left + LFE
There are no differences between the 1.0.5rc1 and 1.0.5a in the
proc/asound/card0/codec97#0/ac97#0-0+regs
Btw, the alsamixer options are getting really out of hand...
Eg a new option called just "Front" (I keep it off since I can't hear any
difference).
Mvh
Mats Johannesson
======================================================================
----------------------------------------------------------------------
pzad - 06-08-2004 08:40 CEST
----------------------------------------------------------------------
I think this AC97 codec problem.
Bug History
Date Modified Username Field Change
======================================================================
06-01-04 10:12 Voluspa New Bug
06-01-04 10:12 Voluspa Distribution => Homebrew
06-01-04 10:12 Voluspa Kernel Version => 2.6.6
06-08-04 08:40 pzad Bugnote Added: 0001294
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event.
GNOME Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2004-09-24 11:32 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-24 8:48 [ALSA - driver 0000320]: FL is FL+FR and FR is FR+FL noreply
-- strict thread matches above, loose matches on Subject: below --
2004-09-24 11:32 bugtrack
2004-07-01 7:43 noreply
2004-06-30 13:36 noreply
2004-06-30 7:00 noreply
2004-06-28 7:14 noreply
2004-06-23 13:21 noreply
2004-06-08 6:40 noreply
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.