From: Kevin Hilman <khilman@baylibre.com>
To: arm@kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] arm64: dts: Amlogic updates for v5.3
Date: Thu, 20 Jun 2019 14:35:16 -0700 [thread overview]
Message-ID: <7h1rzoey97.fsf@baylibre.com> (raw)
Arnd, Olof,
A relatively large set of DT changes this time around, primarily due to
the addition of a new SoC family (G12B) and a bunch of new peripheral
support for a recently added SoC family (G12A). The new SoC and new
board are highlighted in the tag description as well.
There are a couple of merges from other trees included here. One from
the clock tree to fix a binding name, and another from the ASoC tree for
a new binding, used in the newly added audio support for G12A SoCs.
Kevin
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
for you to fetch changes up to 50b617a61874a136d9c4fd75e9cccc7e2f9a03c8:
arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line (2019-06-19 20:37:04 -0700)
----------------------------------------------------------------
arm64: dts: Amlogic updates for v5.3
Highlights:
- new SoC: S922X (G12B family, A73/A53 big.LITTLE)
- new board: Hardkernel odroid-N2 (SoC: G12B S922X)
- add/use ethernet PHY interrupt/reset lines
- G12A: add/enable audio, PWM, IR, i2c, SD/eMMC, WiFi, bluetooth, network
- gxbb-vega-s95 board: fix WiFi/BT, enable more peripherals
----------------------------------------------------------------
Christian Hewitt (4):
arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node
arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support
arm64: dts: meson-gxbb-wetek: enable SARADC
arm64: dts: meson-gxbb-wetek: enable bluetooth
Guillaume La Roque (2):
arm64: dts: meson: g12a: add i2c nodes
arm64: dts: meson-g12a-x96-max: add support for sdcard and emmc
Jerome Brunet (37):
clk: meson: fix MPLL 50M binding id typo
arm64: dts: meson: libretech-cc: set eMMC as removable
arm64: dts: meson: libretech-cc: switch eMMC to 1.8v
arm64: dts: meson: fix mmc pin bias
arm64: dts: meson: fix mmc v2 chips max frequencies
arm64: dts: meson: vim2: add missing clk-gate pinctrl
arm64: dts: meson: vim2: remove sd hs and hs400 modes from emmc
arm64: dts: meson: sei510: consistently order nodes
arm64: dts: meson: u200: consistently order nodes
arm64: dts: meson: nanopi k2: add sd DDR50
arm64: dts: meson: odroid-c2: add missing mmc modes
arm64: dts: meson: g12a: add mmc nodes
arm64: dts: meson: u200: add sd and emmc
arm64: dts: meson: sei510: add sd and emmc
arm64: dts: meson: g12a: set uart_ao clocks
arm64: dts: meson: u200: enable i2c busses
arm64: dts: meson: sei510: enable i2c3
arm64: dts: meson: g12a: add audio clock controller
arm64: dts: meson: g12a: add audio memory arbitrer
arm64: dts: meson: g12a: add audio fifos
arm64: dts: meson: g12a: add tdm
arm64: dts: meson: g12a: add spdifouts
arm64: dts: meson: g12a: add pdm
arm64: dts: meson: g12a: add spdifin
arm64: dts: meson: g12a: enable hdmi_tx sound dai provider
arm64: dts: meson: sei510: add bluetooth supplies
arm64: dts: meson: g12a: add tohdmitx
arm64: dts: meson: g12a: add ethernet mac controller
arm64: dts: meson: g12a: add ethernet pinctrl definitions
arm64: dts: meson: g12a: add mdio multiplexer
arm64: dts: meson: u200: add internal network
arm64: dts: meson: sei510: add network support
arm64: dts: meson: add dwmac-3.70a to ethmac compatible list
arm64: dts: meson: g12a: add SDIO controller
ASoC: meson: add tohdmitx DT bindings
arm64: dts: meson: sei510: add sound card
arm64: dts: meson: g12a: sort sdio nodes correctly
Kevin Hilman (2):
Merge tag 'clk-meson-5.2-1-fixes' of https://github.com/BayLibre/clk-meson into v5.3/dt64
Merge tag 'asoc-tohdmitx' of https://git.kernel.org/.../broonie/sound into HEAD
Martin Blumenstingl (8):
clk: meson: meson8b: fix a typo in the VPU parent names array variable
arm64: dts: amlogic: remove ethernet-phy-idAAAA.BBBB compatible strings
arm64: dts: meson: g12a: add the GPIO interrupt controller
arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line
arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings
arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line
arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line
arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line
Maxime Jourdan (1):
arm64: dts: meson: sei510: add max98357a DAC
Neil Armstrong (25):
arm64: dts: meson-g12a: Add PWM nodes
arm64: dts: meson-g12a: Add IR nodes
arm64: dts: meson-g12a-x96-max: enable IR decoder
arm64: dts: meson-g12a-u200: enable IR decoder
arm64: dts: meson: g12a: add drive-strength hdmi ddc pins
arm64: dts: meson: g12a: add drive strength for eth pins
arm64: dts: meson: g12a: Add hwrng node
arm64: dts: meson-g12a-x96-max: Add Gigabit Ethernet Support
arm64: dts: meson-gxbb-vega-s95: fix regulators
arm64: dts: meson-gxbb-vega-s95: add HDMI nodes
arm64: dts: meson-gxbb-vega-s95: enable CEC
arm64: dts: meson-gxbb-vega-s95: enable SARADC
arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support
arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt
dt-bindings: arm: amlogic: add G12B bindings
dt-bindings: arm: amlogic: add Odroid-N2 binding
arm64: dts: meson: Add minimal support for Odroid-N2
arm64: dts: meson-g12a-x96-max: Enable Wifi SDIO Module
arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module
arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
arm64: dts: meson-g12b-odroid-n2: add sound card
arm64: dts: meson-g12a-x96-max: add sound card
Rob Herring (2):
dt-bindings: arm: amlogic: Move 'amlogic, meson-gx-ao-secure' binding to its own file
dt-bindings: arm: Convert Amlogic board/soc bindings to json-schema
Documentation/devicetree/bindings/arm/amlogic.txt | 142 ------------
Documentation/devicetree/bindings/arm/amlogic.yaml | 144 ++++++++++++
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt | 28 +++
Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt | 55 +++++
arch/arm64/boot/dts/amlogic/Makefile | 1 +
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 4 +-
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 35 ++-
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 401 ++++++++++++++++++++++++++++----
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 122 ++++++++--
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 257 ++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1825 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 386 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 82 +++++++
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 15 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 10 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 15 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 9 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 106 +++++++--
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 37 ++-
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 35 ++-
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 13 +-
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 14 +-
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 35 ++-
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 38 +--
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 12 +-
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 13 +-
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 14 +-
drivers/clk/meson/g12a.c | 4 +-
drivers/clk/meson/g12a.h | 2 +-
drivers/clk/meson/meson8b.c | 10 +-
include/dt-bindings/clock/g12a-clkc.h | 2 +-
include/dt-bindings/sound/meson-g12a-tohdmitx.h | 13 ++
38 files changed, 3534 insertions(+), 363 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/amlogic.txt
create mode 100644 Documentation/devicetree/bindings/arm/amlogic.yaml
create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
create mode 100644 include/dt-bindings/sound/meson-g12a-tohdmitx.h
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: arm@kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] arm64: dts: Amlogic updates for v5.3
Date: Thu, 20 Jun 2019 14:35:16 -0700 [thread overview]
Message-ID: <7h1rzoey97.fsf@baylibre.com> (raw)
Arnd, Olof,
A relatively large set of DT changes this time around, primarily due to
the addition of a new SoC family (G12B) and a bunch of new peripheral
support for a recently added SoC family (G12A). The new SoC and new
board are highlighted in the tag description as well.
There are a couple of merges from other trees included here. One from
the clock tree to fix a binding name, and another from the ASoC tree for
a new binding, used in the newly added audio support for G12A SoCs.
Kevin
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
for you to fetch changes up to 50b617a61874a136d9c4fd75e9cccc7e2f9a03c8:
arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line (2019-06-19 20:37:04 -0700)
----------------------------------------------------------------
arm64: dts: Amlogic updates for v5.3
Highlights:
- new SoC: S922X (G12B family, A73/A53 big.LITTLE)
- new board: Hardkernel odroid-N2 (SoC: G12B S922X)
- add/use ethernet PHY interrupt/reset lines
- G12A: add/enable audio, PWM, IR, i2c, SD/eMMC, WiFi, bluetooth, network
- gxbb-vega-s95 board: fix WiFi/BT, enable more peripherals
----------------------------------------------------------------
Christian Hewitt (4):
arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node
arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support
arm64: dts: meson-gxbb-wetek: enable SARADC
arm64: dts: meson-gxbb-wetek: enable bluetooth
Guillaume La Roque (2):
arm64: dts: meson: g12a: add i2c nodes
arm64: dts: meson-g12a-x96-max: add support for sdcard and emmc
Jerome Brunet (37):
clk: meson: fix MPLL 50M binding id typo
arm64: dts: meson: libretech-cc: set eMMC as removable
arm64: dts: meson: libretech-cc: switch eMMC to 1.8v
arm64: dts: meson: fix mmc pin bias
arm64: dts: meson: fix mmc v2 chips max frequencies
arm64: dts: meson: vim2: add missing clk-gate pinctrl
arm64: dts: meson: vim2: remove sd hs and hs400 modes from emmc
arm64: dts: meson: sei510: consistently order nodes
arm64: dts: meson: u200: consistently order nodes
arm64: dts: meson: nanopi k2: add sd DDR50
arm64: dts: meson: odroid-c2: add missing mmc modes
arm64: dts: meson: g12a: add mmc nodes
arm64: dts: meson: u200: add sd and emmc
arm64: dts: meson: sei510: add sd and emmc
arm64: dts: meson: g12a: set uart_ao clocks
arm64: dts: meson: u200: enable i2c busses
arm64: dts: meson: sei510: enable i2c3
arm64: dts: meson: g12a: add audio clock controller
arm64: dts: meson: g12a: add audio memory arbitrer
arm64: dts: meson: g12a: add audio fifos
arm64: dts: meson: g12a: add tdm
arm64: dts: meson: g12a: add spdifouts
arm64: dts: meson: g12a: add pdm
arm64: dts: meson: g12a: add spdifin
arm64: dts: meson: g12a: enable hdmi_tx sound dai provider
arm64: dts: meson: sei510: add bluetooth supplies
arm64: dts: meson: g12a: add tohdmitx
arm64: dts: meson: g12a: add ethernet mac controller
arm64: dts: meson: g12a: add ethernet pinctrl definitions
arm64: dts: meson: g12a: add mdio multiplexer
arm64: dts: meson: u200: add internal network
arm64: dts: meson: sei510: add network support
arm64: dts: meson: add dwmac-3.70a to ethmac compatible list
arm64: dts: meson: g12a: add SDIO controller
ASoC: meson: add tohdmitx DT bindings
arm64: dts: meson: sei510: add sound card
arm64: dts: meson: g12a: sort sdio nodes correctly
Kevin Hilman (2):
Merge tag 'clk-meson-5.2-1-fixes' of https://github.com/BayLibre/clk-meson into v5.3/dt64
Merge tag 'asoc-tohdmitx' of https://git.kernel.org/.../broonie/sound into HEAD
Martin Blumenstingl (8):
clk: meson: meson8b: fix a typo in the VPU parent names array variable
arm64: dts: amlogic: remove ethernet-phy-idAAAA.BBBB compatible strings
arm64: dts: meson: g12a: add the GPIO interrupt controller
arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line
arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings
arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line
arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line
arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line
Maxime Jourdan (1):
arm64: dts: meson: sei510: add max98357a DAC
Neil Armstrong (25):
arm64: dts: meson-g12a: Add PWM nodes
arm64: dts: meson-g12a: Add IR nodes
arm64: dts: meson-g12a-x96-max: enable IR decoder
arm64: dts: meson-g12a-u200: enable IR decoder
arm64: dts: meson: g12a: add drive-strength hdmi ddc pins
arm64: dts: meson: g12a: add drive strength for eth pins
arm64: dts: meson: g12a: Add hwrng node
arm64: dts: meson-g12a-x96-max: Add Gigabit Ethernet Support
arm64: dts: meson-gxbb-vega-s95: fix regulators
arm64: dts: meson-gxbb-vega-s95: add HDMI nodes
arm64: dts: meson-gxbb-vega-s95: enable CEC
arm64: dts: meson-gxbb-vega-s95: enable SARADC
arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support
arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt
dt-bindings: arm: amlogic: add G12B bindings
dt-bindings: arm: amlogic: add Odroid-N2 binding
arm64: dts: meson: Add minimal support for Odroid-N2
arm64: dts: meson-g12a-x96-max: Enable Wifi SDIO Module
arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module
arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
arm64: dts: meson-g12b-odroid-n2: add sound card
arm64: dts: meson-g12a-x96-max: add sound card
Rob Herring (2):
dt-bindings: arm: amlogic: Move 'amlogic, meson-gx-ao-secure' binding to its own file
dt-bindings: arm: Convert Amlogic board/soc bindings to json-schema
Documentation/devicetree/bindings/arm/amlogic.txt | 142 ------------
Documentation/devicetree/bindings/arm/amlogic.yaml | 144 ++++++++++++
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt | 28 +++
Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt | 55 +++++
arch/arm64/boot/dts/amlogic/Makefile | 1 +
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 4 +-
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 35 ++-
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 401 ++++++++++++++++++++++++++++----
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 122 ++++++++--
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 257 ++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1825 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 386 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 82 +++++++
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 15 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 10 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 15 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 9 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 106 +++++++--
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 37 ++-
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 35 ++-
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 13 +-
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 14 +-
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 35 ++-
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 38 +--
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 12 +-
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 13 +-
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 14 +-
drivers/clk/meson/g12a.c | 4 +-
drivers/clk/meson/g12a.h | 2 +-
drivers/clk/meson/meson8b.c | 10 +-
include/dt-bindings/clock/g12a-clkc.h | 2 +-
include/dt-bindings/sound/meson-g12a-tohdmitx.h | 13 ++
38 files changed, 3534 insertions(+), 363 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/amlogic.txt
create mode 100644 Documentation/devicetree/bindings/arm/amlogic.yaml
create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
create mode 100644 include/dt-bindings/sound/meson-g12a-tohdmitx.h
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-06-20 21:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-20 21:35 Kevin Hilman [this message]
2019-06-20 21:35 ` [GIT PULL] arm64: dts: Amlogic updates for v5.3 Kevin Hilman
2019-06-25 12:52 ` Olof Johansson
2019-06-25 12:52 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7h1rzoey97.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=arm@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.