From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, christianshewitt@gmail.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH 0/6] arm64: add support for the Khadas VIM3
Date: Thu, 08 Aug 2019 10:57:53 -0700 [thread overview]
Message-ID: <7h4l2rfske.fsf@baylibre.com> (raw)
In-Reply-To: <20190731124000.22072-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
> Amlogic G12B SoC family, on a board with the same form factor as the
> VIM/VIM2 models. It ships in two variants; basic and
> pro which differ in RAM and eMMC size:
>
> - 2GB (basic) or 4GB (pro) LPDDR4 RAM
> - 16GB (basic) or 32GB (pro) eMMC 5.1 storage
> - 16MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
> - HDMI 2.1 video
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - IR receiver
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
>
> First of all, the S922X and A311D are now specified since they differ
> by some HW features and the capable operating points.
>
> A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
> A311D SoCs supported by two variants of the board.
>
> Odroid-N2 is changed to use the s922x.dtsi include.
>
> Dependencies:
> - patch 5 & 6: "arm64: g12a: add support for DVFS" at [1]
And patch 6 on the clock series (specificly the new CPU_CLKB id)
> [1] https://patchwork.kernel.org/cover/11063837/
>
> Christian Hewitt (4):
> soc: amlogic: meson-gx-socinfo: add A311D id
Queued in v5.4/drivers
> dt-bindings: arm: amlogic: add support for the Khadas VIM3
> arm64: dts: meson-g12b: support a311d and s922x cpu operating points
Queued in v5.4/dt64
> arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
This one I've left off for now due to the clock dependency and some
suggestions from Martin.
> Neil Armstrong (2):
> dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
> dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based
> A311D SoC
Queued in v5.4/dt64
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, christianshewitt@gmail.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH 0/6] arm64: add support for the Khadas VIM3
Date: Thu, 08 Aug 2019 10:57:53 -0700 [thread overview]
Message-ID: <7h4l2rfske.fsf@baylibre.com> (raw)
In-Reply-To: <20190731124000.22072-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
> Amlogic G12B SoC family, on a board with the same form factor as the
> VIM/VIM2 models. It ships in two variants; basic and
> pro which differ in RAM and eMMC size:
>
> - 2GB (basic) or 4GB (pro) LPDDR4 RAM
> - 16GB (basic) or 32GB (pro) eMMC 5.1 storage
> - 16MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
> - HDMI 2.1 video
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - IR receiver
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
>
> First of all, the S922X and A311D are now specified since they differ
> by some HW features and the capable operating points.
>
> A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
> A311D SoCs supported by two variants of the board.
>
> Odroid-N2 is changed to use the s922x.dtsi include.
>
> Dependencies:
> - patch 5 & 6: "arm64: g12a: add support for DVFS" at [1]
And patch 6 on the clock series (specificly the new CPU_CLKB id)
> [1] https://patchwork.kernel.org/cover/11063837/
>
> Christian Hewitt (4):
> soc: amlogic: meson-gx-socinfo: add A311D id
Queued in v5.4/drivers
> dt-bindings: arm: amlogic: add support for the Khadas VIM3
> arm64: dts: meson-g12b: support a311d and s922x cpu operating points
Queued in v5.4/dt64
> arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
This one I've left off for now due to the clock dependency and some
suggestions from Martin.
> Neil Armstrong (2):
> dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
> dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based
> A311D SoC
Queued in v5.4/dt64
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, christianshewitt@gmail.com
Subject: Re: [PATCH 0/6] arm64: add support for the Khadas VIM3
Date: Thu, 08 Aug 2019 10:57:53 -0700 [thread overview]
Message-ID: <7h4l2rfske.fsf@baylibre.com> (raw)
In-Reply-To: <20190731124000.22072-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
> Amlogic G12B SoC family, on a board with the same form factor as the
> VIM/VIM2 models. It ships in two variants; basic and
> pro which differ in RAM and eMMC size:
>
> - 2GB (basic) or 4GB (pro) LPDDR4 RAM
> - 16GB (basic) or 32GB (pro) eMMC 5.1 storage
> - 16MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
> - HDMI 2.1 video
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - IR receiver
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
>
> First of all, the S922X and A311D are now specified since they differ
> by some HW features and the capable operating points.
>
> A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
> A311D SoCs supported by two variants of the board.
>
> Odroid-N2 is changed to use the s922x.dtsi include.
>
> Dependencies:
> - patch 5 & 6: "arm64: g12a: add support for DVFS" at [1]
And patch 6 on the clock series (specificly the new CPU_CLKB id)
> [1] https://patchwork.kernel.org/cover/11063837/
>
> Christian Hewitt (4):
> soc: amlogic: meson-gx-socinfo: add A311D id
Queued in v5.4/drivers
> dt-bindings: arm: amlogic: add support for the Khadas VIM3
> arm64: dts: meson-g12b: support a311d and s922x cpu operating points
Queued in v5.4/dt64
> arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
This one I've left off for now due to the clock dependency and some
suggestions from Martin.
> Neil Armstrong (2):
> dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
> dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based
> A311D SoC
Queued in v5.4/dt64
Kevin
next prev parent reply other threads:[~2019-08-08 17:58 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-31 12:39 [PATCH 0/6] arm64: add support for the Khadas VIM3 Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 12:39 ` [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-08-05 21:47 ` Kevin Hilman
2019-08-05 21:47 ` Kevin Hilman
2019-08-05 21:47 ` Kevin Hilman
2019-07-31 12:39 ` [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 16:54 ` Rob Herring
2019-07-31 16:54 ` Rob Herring
2019-07-31 16:54 ` Rob Herring
2019-08-05 21:46 ` Kevin Hilman
2019-08-05 21:46 ` Kevin Hilman
2019-08-05 21:46 ` Kevin Hilman
2019-08-05 21:46 ` Kevin Hilman
2019-08-05 22:21 ` Rob Herring
2019-08-05 22:21 ` Rob Herring
2019-08-05 22:21 ` Rob Herring
2019-08-05 22:26 ` Rob Herring
2019-08-05 22:26 ` Rob Herring
2019-08-05 22:26 ` Rob Herring
2019-08-08 3:02 ` Kevin Hilman
2019-08-08 3:02 ` Kevin Hilman
2019-08-08 3:02 ` Kevin Hilman
2019-08-08 3:02 ` Kevin Hilman
2019-07-31 12:39 ` [PATCH 3/6] dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 16:55 ` Rob Herring
2019-07-31 16:55 ` Rob Herring
2019-07-31 16:55 ` Rob Herring
2019-07-31 12:39 ` [PATCH 4/6] dt-bindings: arm: amlogic: add support for the Khadas VIM3 Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 16:55 ` Rob Herring
2019-07-31 16:55 ` Rob Herring
2019-07-31 16:55 ` Rob Herring
2019-07-31 12:39 ` [PATCH 5/6] arm64: dts: meson-g12b: support a311d and s922x cpu operating points Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 12:39 ` Neil Armstrong
2019-07-31 12:40 ` [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree Neil Armstrong
2019-07-31 12:40 ` Neil Armstrong
2019-07-31 12:40 ` Neil Armstrong
2019-08-03 18:50 ` Martin Blumenstingl
2019-08-03 18:50 ` Martin Blumenstingl
2019-08-03 18:50 ` Martin Blumenstingl
2019-08-06 15:48 ` Neil Armstrong
2019-08-06 15:48 ` Neil Armstrong
2019-08-06 15:48 ` Neil Armstrong
2019-08-08 17:57 ` Kevin Hilman [this message]
2019-08-08 17:57 ` [PATCH 0/6] arm64: add support for the Khadas VIM3 Kevin Hilman
2019-08-08 17:57 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7h4l2rfske.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=christianshewitt@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.