From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>, jbrunet@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH] arm64: dts: meson-g12a-x96-max: add sound card
Date: Fri, 14 Jun 2019 16:26:24 -0700 [thread overview]
Message-ID: <7h5zp7eokf.fsf@baylibre.com> (raw)
In-Reply-To: <20190611150101.30413-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> Enable the sound card on the X96 Max, enabling HDMI output using the
> TDM interface B, being aligned on other boards sound cards.
> SPDI/F support is also enabled to the physical toslink port and to HDMI.
>
> The internal DAC connected to the audio jack will be added later on, when
> driver support is added.
>
> Tested by running:
> tinymix set "FRDDR_A SRC 1 EN Switch" 1
> tinymix set "FRDDR_A SINK 1 SEL" "OUT 1"
> tinymix set "FRDDR_B SRC 1 EN Switch" 1
> tinymix set "FRDDR_B SINK 1 SEL" "OUT 1"
> tinymix set "FRDDR_C SRC 1 EN Switch" 1
> tinymix set "FRDDR_C SINK 1 SEL" "OUT 1"
> tinymix set "TOHDMITX I2S SRC" "I2S B"
> tinymix set "TOHDMITX Switch" 1
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 0"
> speaker-test -Dhw:0,0 -c2
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 1"
> speaker-test -Dhw:0,1 -c2
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 2"
> speaker-test -Dhw:0,2 -c2
>
> testing HDMI audio output from the all 3 ASoC playback interfaces.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Queued for v5.3,
Thanks,
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>, jbrunet@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH] arm64: dts: meson-g12a-x96-max: add sound card
Date: Fri, 14 Jun 2019 16:26:24 -0700 [thread overview]
Message-ID: <7h5zp7eokf.fsf@baylibre.com> (raw)
In-Reply-To: <20190611150101.30413-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> Enable the sound card on the X96 Max, enabling HDMI output using the
> TDM interface B, being aligned on other boards sound cards.
> SPDI/F support is also enabled to the physical toslink port and to HDMI.
>
> The internal DAC connected to the audio jack will be added later on, when
> driver support is added.
>
> Tested by running:
> tinymix set "FRDDR_A SRC 1 EN Switch" 1
> tinymix set "FRDDR_A SINK 1 SEL" "OUT 1"
> tinymix set "FRDDR_B SRC 1 EN Switch" 1
> tinymix set "FRDDR_B SINK 1 SEL" "OUT 1"
> tinymix set "FRDDR_C SRC 1 EN Switch" 1
> tinymix set "FRDDR_C SINK 1 SEL" "OUT 1"
> tinymix set "TOHDMITX I2S SRC" "I2S B"
> tinymix set "TOHDMITX Switch" 1
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 0"
> speaker-test -Dhw:0,0 -c2
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 1"
> speaker-test -Dhw:0,1 -c2
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 2"
> speaker-test -Dhw:0,2 -c2
>
> testing HDMI audio output from the all 3 ASoC playback interfaces.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Queued for v5.3,
Thanks,
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>, jbrunet@baylibre.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: meson-g12a-x96-max: add sound card
Date: Fri, 14 Jun 2019 16:26:24 -0700 [thread overview]
Message-ID: <7h5zp7eokf.fsf@baylibre.com> (raw)
In-Reply-To: <20190611150101.30413-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> Enable the sound card on the X96 Max, enabling HDMI output using the
> TDM interface B, being aligned on other boards sound cards.
> SPDI/F support is also enabled to the physical toslink port and to HDMI.
>
> The internal DAC connected to the audio jack will be added later on, when
> driver support is added.
>
> Tested by running:
> tinymix set "FRDDR_A SRC 1 EN Switch" 1
> tinymix set "FRDDR_A SINK 1 SEL" "OUT 1"
> tinymix set "FRDDR_B SRC 1 EN Switch" 1
> tinymix set "FRDDR_B SINK 1 SEL" "OUT 1"
> tinymix set "FRDDR_C SRC 1 EN Switch" 1
> tinymix set "FRDDR_C SINK 1 SEL" "OUT 1"
> tinymix set "TOHDMITX I2S SRC" "I2S B"
> tinymix set "TOHDMITX Switch" 1
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 0"
> speaker-test -Dhw:0,0 -c2
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 1"
> speaker-test -Dhw:0,1 -c2
>
> then:
> tinymix set "TDMOUT_B SRC SEL" "IN 2"
> speaker-test -Dhw:0,2 -c2
>
> testing HDMI audio output from the all 3 ASoC playback interfaces.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Queued for v5.3,
Thanks,
Kevin
next prev parent reply other threads:[~2019-06-14 23:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-11 15:01 [PATCH] arm64: dts: meson-g12a-x96-max: add sound card Neil Armstrong
2019-06-11 15:01 ` Neil Armstrong
2019-06-11 15:01 ` Neil Armstrong
2019-06-14 23:26 ` Kevin Hilman [this message]
2019-06-14 23:26 ` Kevin Hilman
2019-06-14 23:26 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7h5zp7eokf.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.