[PATCH V2 0/4] Power: C3: add power domain driver

[PATCH V2 0/4] Power: C3: add power domain driver

[Xianwei Zhao]

First patch is that Use 'name' instead of 'index' as criterion.
The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
PWRC_C3_NNA_ID be defined zero.

Other patchs adds power controller driver support for Amlogic C3 SoC.
The power domains registers can be accessed in the secure world only.

Changes Since v1:
 -Add a new patch for change that use 'name' instead of 'index'.
 -Mofiy filename  matching compatibles
 -Delete unnecessary blank line.
 -Fixed some formatting.
 -Delete status,use "okay" status by default.

Xianwei Zhao (4):
  soc: amlogic: use name instead of index as criterion
  dt-bindings: power: add Amlogic C3 power domains
  soc: c3: Add support for power domains controller
  arm64: dts: add support for C3 power domain controller

 .../power/amlogic,meson-sec-pwrc.yaml         |  3 +-
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   |  9 ++++++
 drivers/soc/amlogic/meson-secure-pwrc.c       | 28 ++++++++++++++++++-
 include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++
 4 files changed, 63 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h


base-commit: 057889cb4244096ea5abcbe76ffd4d311c3078fe
-- 
2.37.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH V2 0/4] Power: C3: add power domain driver

[Xianwei Zhao]

First patch is that Use 'name' instead of 'index' as criterion.
The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
PWRC_C3_NNA_ID be defined zero.

Other patchs adds power controller driver support for Amlogic C3 SoC.
The power domains registers can be accessed in the secure world only.

Changes Since v1:
 -Add a new patch for change that use 'name' instead of 'index'.
 -Mofiy filename  matching compatibles
 -Delete unnecessary blank line.
 -Fixed some formatting.
 -Delete status,use "okay" status by default.

Xianwei Zhao (4):
  soc: amlogic: use name instead of index as criterion
  dt-bindings: power: add Amlogic C3 power domains
  soc: c3: Add support for power domains controller
  arm64: dts: add support for C3 power domain controller

 .../power/amlogic,meson-sec-pwrc.yaml         |  3 +-
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   |  9 ++++++
 drivers/soc/amlogic/meson-secure-pwrc.c       | 28 ++++++++++++++++++-
 include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++
 4 files changed, 63 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h


base-commit: 057889cb4244096ea5abcbe76ffd4d311c3078fe
-- 
2.37.1

[PATCH V2 0/4] Power: C3: add power domain driver

[Xianwei Zhao]

First patch is that Use 'name' instead of 'index' as criterion.
The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
PWRC_C3_NNA_ID be defined zero.

Other patchs adds power controller driver support for Amlogic C3 SoC.
The power domains registers can be accessed in the secure world only.

Changes Since v1:
 -Add a new patch for change that use 'name' instead of 'index'.
 -Mofiy filename  matching compatibles
 -Delete unnecessary blank line.
 -Fixed some formatting.
 -Delete status,use "okay" status by default.

Xianwei Zhao (4):
  soc: amlogic: use name instead of index as criterion
  dt-bindings: power: add Amlogic C3 power domains
  soc: c3: Add support for power domains controller
  arm64: dts: add support for C3 power domain controller

 .../power/amlogic,meson-sec-pwrc.yaml         |  3 +-
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   |  9 ++++++
 drivers/soc/amlogic/meson-secure-pwrc.c       | 28 ++++++++++++++++++-
 include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++
 4 files changed, 63 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h


base-commit: 057889cb4244096ea5abcbe76ffd4d311c3078fe
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Xianwei Zhao]

The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: add a new patch for change.
---
 drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
index 25b4b71df9b8..c11d65a3e3d9 100644
--- a/drivers/soc/amlogic/meson-secure-pwrc.c
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
 	for (i = 0 ; i < match->count ; ++i) {
 		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
 
-		if (!match->domains[i].index)
+		if (!match->domains[i].name)
 			continue;
 
 		dom->pwrc = pwrc;
-- 
2.37.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Xianwei Zhao]

The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: add a new patch for change.
---
 drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
index 25b4b71df9b8..c11d65a3e3d9 100644
--- a/drivers/soc/amlogic/meson-secure-pwrc.c
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
 	for (i = 0 ; i < match->count ; ++i) {
 		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
 
-		if (!match->domains[i].index)
+		if (!match->domains[i].name)
 			continue;
 
 		dom->pwrc = pwrc;
-- 
2.37.1

[PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Xianwei Zhao]

The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: add a new patch for change.
---
 drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
index 25b4b71df9b8..c11d65a3e3d9 100644
--- a/drivers/soc/amlogic/meson-secure-pwrc.c
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
 	for (i = 0 ; i < match->count ; ++i) {
 		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
 
-		if (!match->domains[i].index)
+		if (!match->domains[i].name)
 			continue;
 
 		dom->pwrc = pwrc;
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: add a new patch for change.
> ---
>   drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index 25b4b71df9b8..c11d65a3e3d9 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
>   	for (i = 0 ; i < match->count ; ++i) {
>   		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
>   
> -		if (!match->domains[i].index)
> +		if (!match->domains[i].name)
>   			continue;
>   
>   		dom->pwrc = pwrc;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: add a new patch for change.
> ---
>   drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index 25b4b71df9b8..c11d65a3e3d9 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
>   	for (i = 0 ; i < match->count ; ++i) {
>   		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
>   
> -		if (!match->domains[i].index)
> +		if (!match->domains[i].name)
>   			continue;
>   
>   		dom->pwrc = pwrc;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: add a new patch for change.
> ---
>   drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index 25b4b71df9b8..c11d65a3e3d9 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
>   	for (i = 0 ; i < match->count ; ++i) {
>   		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
>   
> -		if (!match->domains[i].index)
> +		if (!match->domains[i].name)
>   			continue;
>   
>   		dom->pwrc = pwrc;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Dmitry Rokosov]

On Fri, Jul 07, 2023 at 08:37:07AM +0800, Xianwei Zhao wrote:
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>

Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>

> ---
> V1 -> V2: add a new patch for change.
> ---
>  drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index 25b4b71df9b8..c11d65a3e3d9 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
>  	for (i = 0 ; i < match->count ; ++i) {
>  		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
>  
> -		if (!match->domains[i].index)
> +		if (!match->domains[i].name)
>  			continue;
>  
>  		dom->pwrc = pwrc;
> -- 
> 2.37.1
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

-- 
Thank you,
Dmitry

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Dmitry Rokosov]

On Fri, Jul 07, 2023 at 08:37:07AM +0800, Xianwei Zhao wrote:
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>

Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>

> ---
> V1 -> V2: add a new patch for change.
> ---
>  drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index 25b4b71df9b8..c11d65a3e3d9 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
>  	for (i = 0 ; i < match->count ; ++i) {
>  		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
>  
> -		if (!match->domains[i].index)
> +		if (!match->domains[i].name)
>  			continue;
>  
>  		dom->pwrc = pwrc;
> -- 
> 2.37.1
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

-- 
Thank you,
Dmitry

Re: [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion

[Dmitry Rokosov]

On Fri, Jul 07, 2023 at 08:37:07AM +0800, Xianwei Zhao wrote:
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero. Use 'name' instead of 'index' as criterion.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>

Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>

> ---
> V1 -> V2: add a new patch for change.
> ---
>  drivers/soc/amlogic/meson-secure-pwrc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index 25b4b71df9b8..c11d65a3e3d9 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -179,7 +179,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
>  	for (i = 0 ; i < match->count ; ++i) {
>  		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
>  
> -		if (!match->domains[i].index)
> +		if (!match->domains[i].name)
>  			continue;
>  
>  		dom->pwrc = pwrc;
> -- 
> 2.37.1
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

-- 
Thank you,
Dmitry

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 2/4] dt-bindings: power: add Amlogic C3 power domains

[Xianwei Zhao]

Add devicetree binding document and related header file for Amlogic C3 secure power domains.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2:  Mofiy filename  matching compatibles.
	   Delete unnecessary blank line.
---
 .../power/amlogic,meson-sec-pwrc.yaml         |  3 ++-
 include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++++
 2 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
index eab21bb2050a..d80bbedfe3aa 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -12,7 +12,7 @@ maintainers:
   - Jianxin Pan <jianxin.pan@amlogic.com>
 
 description: |+
-  Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node
+  Secure Power Domains used in Meson A1/C1/S4 & C3 SoCs, and should be the child node
   of secure-monitor.
 
 properties:
@@ -20,6 +20,7 @@ properties:
     enum:
       - amlogic,meson-a1-pwrc
       - amlogic,meson-s4-pwrc
+      - amlogic,c3-pwrc
 
   "#power-domain-cells":
     const: 1
diff --git a/include/dt-bindings/power/amlogic,c3-pwrc.h b/include/dt-bindings/power/amlogic,c3-pwrc.h
new file mode 100644
index 000000000000..1d98a25b08a4
--- /dev/null
+++ b/include/dt-bindings/power/amlogic,c3-pwrc.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc.
+ * Author: hongyu chen1 <hongyu.chen1@amlogic.com>
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_C3_POWER_H
+#define _DT_BINDINGS_AMLOGIC_C3_POWER_H
+
+#define PWRC_C3_NNA_ID				0
+#define PWRC_C3_AUDIO_ID			1
+#define PWRC_C3_RESV_SEC_ID			2
+#define PWRC_C3_SDIOA_ID			3
+#define PWRC_C3_EMMC_ID				4
+#define PWRC_C3_USB_COMB_ID			5
+#define PWRC_C3_SDCARD_ID			6
+#define PWRC_C3_ETH_ID				7
+#define PWRC_C3_RESV0_ID			8
+#define PWRC_C3_GE2D_ID				9
+#define PWRC_C3_CVE_ID				10
+#define PWRC_C3_GDC_WRAP_ID			11
+#define PWRC_C3_ISP_TOP_ID			12
+#define PWRC_C3_MIPI_ISP_WRAP_ID		13
+#define PWRC_C3_VCODEC_ID			14
+
+#endif
-- 
2.37.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH V2 2/4] dt-bindings: power: add Amlogic C3 power domains

[Xianwei Zhao]

Add devicetree binding document and related header file for Amlogic C3 secure power domains.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2:  Mofiy filename  matching compatibles.
	   Delete unnecessary blank line.
---
 .../power/amlogic,meson-sec-pwrc.yaml         |  3 ++-
 include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++++
 2 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
index eab21bb2050a..d80bbedfe3aa 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -12,7 +12,7 @@ maintainers:
   - Jianxin Pan <jianxin.pan@amlogic.com>
 
 description: |+
-  Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node
+  Secure Power Domains used in Meson A1/C1/S4 & C3 SoCs, and should be the child node
   of secure-monitor.
 
 properties:
@@ -20,6 +20,7 @@ properties:
     enum:
       - amlogic,meson-a1-pwrc
       - amlogic,meson-s4-pwrc
+      - amlogic,c3-pwrc
 
   "#power-domain-cells":
     const: 1
diff --git a/include/dt-bindings/power/amlogic,c3-pwrc.h b/include/dt-bindings/power/amlogic,c3-pwrc.h
new file mode 100644
index 000000000000..1d98a25b08a4
--- /dev/null
+++ b/include/dt-bindings/power/amlogic,c3-pwrc.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc.
+ * Author: hongyu chen1 <hongyu.chen1@amlogic.com>
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_C3_POWER_H
+#define _DT_BINDINGS_AMLOGIC_C3_POWER_H
+
+#define PWRC_C3_NNA_ID				0
+#define PWRC_C3_AUDIO_ID			1
+#define PWRC_C3_RESV_SEC_ID			2
+#define PWRC_C3_SDIOA_ID			3
+#define PWRC_C3_EMMC_ID				4
+#define PWRC_C3_USB_COMB_ID			5
+#define PWRC_C3_SDCARD_ID			6
+#define PWRC_C3_ETH_ID				7
+#define PWRC_C3_RESV0_ID			8
+#define PWRC_C3_GE2D_ID				9
+#define PWRC_C3_CVE_ID				10
+#define PWRC_C3_GDC_WRAP_ID			11
+#define PWRC_C3_ISP_TOP_ID			12
+#define PWRC_C3_MIPI_ISP_WRAP_ID		13
+#define PWRC_C3_VCODEC_ID			14
+
+#endif
-- 
2.37.1

[PATCH V2 2/4] dt-bindings: power: add Amlogic C3 power domains

[Xianwei Zhao]

Add devicetree binding document and related header file for Amlogic C3 secure power domains.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2:  Mofiy filename  matching compatibles.
	   Delete unnecessary blank line.
---
 .../power/amlogic,meson-sec-pwrc.yaml         |  3 ++-
 include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++++
 2 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
index eab21bb2050a..d80bbedfe3aa 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -12,7 +12,7 @@ maintainers:
   - Jianxin Pan <jianxin.pan@amlogic.com>
 
 description: |+
-  Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node
+  Secure Power Domains used in Meson A1/C1/S4 & C3 SoCs, and should be the child node
   of secure-monitor.
 
 properties:
@@ -20,6 +20,7 @@ properties:
     enum:
       - amlogic,meson-a1-pwrc
       - amlogic,meson-s4-pwrc
+      - amlogic,c3-pwrc
 
   "#power-domain-cells":
     const: 1
diff --git a/include/dt-bindings/power/amlogic,c3-pwrc.h b/include/dt-bindings/power/amlogic,c3-pwrc.h
new file mode 100644
index 000000000000..1d98a25b08a4
--- /dev/null
+++ b/include/dt-bindings/power/amlogic,c3-pwrc.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc.
+ * Author: hongyu chen1 <hongyu.chen1@amlogic.com>
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_C3_POWER_H
+#define _DT_BINDINGS_AMLOGIC_C3_POWER_H
+
+#define PWRC_C3_NNA_ID				0
+#define PWRC_C3_AUDIO_ID			1
+#define PWRC_C3_RESV_SEC_ID			2
+#define PWRC_C3_SDIOA_ID			3
+#define PWRC_C3_EMMC_ID				4
+#define PWRC_C3_USB_COMB_ID			5
+#define PWRC_C3_SDCARD_ID			6
+#define PWRC_C3_ETH_ID				7
+#define PWRC_C3_RESV0_ID			8
+#define PWRC_C3_GE2D_ID				9
+#define PWRC_C3_CVE_ID				10
+#define PWRC_C3_GDC_WRAP_ID			11
+#define PWRC_C3_ISP_TOP_ID			12
+#define PWRC_C3_MIPI_ISP_WRAP_ID		13
+#define PWRC_C3_VCODEC_ID			14
+
+#endif
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 2/4] dt-bindings: power: add Amlogic C3 power domains

[Rob Herring]

On Fri, 07 Jul 2023 08:37:08 +0800, Xianwei Zhao wrote:
> Add devicetree binding document and related header file for Amlogic C3 secure power domains.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2:  Mofiy filename  matching compatibles.
> 	   Delete unnecessary blank line.
> ---
>  .../power/amlogic,meson-sec-pwrc.yaml         |  3 ++-
>  include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++++
>  2 files changed, 27 insertions(+), 1 deletion(-)
>  create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h
> 

Acked-by: Rob Herring <robh@kernel.org>


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH V2 2/4] dt-bindings: power: add Amlogic C3 power domains

[Rob Herring]

On Fri, 07 Jul 2023 08:37:08 +0800, Xianwei Zhao wrote:
> Add devicetree binding document and related header file for Amlogic C3 secure power domains.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2:  Mofiy filename  matching compatibles.
> 	   Delete unnecessary blank line.
> ---
>  .../power/amlogic,meson-sec-pwrc.yaml         |  3 ++-
>  include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++++
>  2 files changed, 27 insertions(+), 1 deletion(-)
>  create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH V2 2/4] dt-bindings: power: add Amlogic C3 power domains

[Rob Herring]

On Fri, 07 Jul 2023 08:37:08 +0800, Xianwei Zhao wrote:
> Add devicetree binding document and related header file for Amlogic C3 secure power domains.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2:  Mofiy filename  matching compatibles.
> 	   Delete unnecessary blank line.
> ---
>  .../power/amlogic,meson-sec-pwrc.yaml         |  3 ++-
>  include/dt-bindings/power/amlogic,c3-pwrc.h   | 25 +++++++++++++++++++
>  2 files changed, 27 insertions(+), 1 deletion(-)
>  create mode 100644 include/dt-bindings/power/amlogic,c3-pwrc.h
> 

Acked-by: Rob Herring <robh@kernel.org>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 3/4] soc: c3: Add support for power domains controller

[Xianwei Zhao]

Add support for C3 Power controller. C3 power control
registers are in secure domain, and should be accessed by SMC.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: Fixed some formatting.
---
 drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
index c11d65a3e3d9..a1ffebf70de3 100644
--- a/drivers/soc/amlogic/meson-secure-pwrc.c
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <dt-bindings/power/meson-a1-power.h>
+#include <dt-bindings/power/amlogic,c3-pwrc.h>
 #include <dt-bindings/power/meson-s4-power.h>
 #include <linux/arm-smccc.h>
 #include <linux/firmware/meson/meson_sm.h>
@@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
 	SEC_PD(RSA,	0),
 };
 
+static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
+	SEC_PD(C3_NNA,	0),
+	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_VCODEC,	0),
+};
+
 static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
 	SEC_PD(S4_DOS_HEVC,	0),
 	SEC_PD(S4_DOS_VDEC,	0),
@@ -202,6 +219,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
 	.count = ARRAY_SIZE(a1_pwrc_domains),
 };
 
+static struct meson_secure_pwrc_domain_data amlogic_secure_c3_pwrc_data = {
+	.domains = c3_pwrc_domains,
+	.count = ARRAY_SIZE(c3_pwrc_domains),
+};
+
 static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
 	.domains = s4_pwrc_domains,
 	.count = ARRAY_SIZE(s4_pwrc_domains),
@@ -212,6 +234,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
 		.compatible = "amlogic,meson-a1-pwrc",
 		.data = &meson_secure_a1_pwrc_data,
 	},
+	{
+		.compatible = "amlogic,c3-pwrc",
+		.data = &amlogic_secure_c3_pwrc_data,
+	},
 	{
 		.compatible = "amlogic,meson-s4-pwrc",
 		.data = &meson_secure_s4_pwrc_data,
-- 
2.37.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH V2 3/4] soc: c3: Add support for power domains controller

[Xianwei Zhao]

Add support for C3 Power controller. C3 power control
registers are in secure domain, and should be accessed by SMC.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: Fixed some formatting.
---
 drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
index c11d65a3e3d9..a1ffebf70de3 100644
--- a/drivers/soc/amlogic/meson-secure-pwrc.c
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <dt-bindings/power/meson-a1-power.h>
+#include <dt-bindings/power/amlogic,c3-pwrc.h>
 #include <dt-bindings/power/meson-s4-power.h>
 #include <linux/arm-smccc.h>
 #include <linux/firmware/meson/meson_sm.h>
@@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
 	SEC_PD(RSA,	0),
 };
 
+static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
+	SEC_PD(C3_NNA,	0),
+	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_VCODEC,	0),
+};
+
 static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
 	SEC_PD(S4_DOS_HEVC,	0),
 	SEC_PD(S4_DOS_VDEC,	0),
@@ -202,6 +219,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
 	.count = ARRAY_SIZE(a1_pwrc_domains),
 };
 
+static struct meson_secure_pwrc_domain_data amlogic_secure_c3_pwrc_data = {
+	.domains = c3_pwrc_domains,
+	.count = ARRAY_SIZE(c3_pwrc_domains),
+};
+
 static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
 	.domains = s4_pwrc_domains,
 	.count = ARRAY_SIZE(s4_pwrc_domains),
@@ -212,6 +234,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
 		.compatible = "amlogic,meson-a1-pwrc",
 		.data = &meson_secure_a1_pwrc_data,
 	},
+	{
+		.compatible = "amlogic,c3-pwrc",
+		.data = &amlogic_secure_c3_pwrc_data,
+	},
 	{
 		.compatible = "amlogic,meson-s4-pwrc",
 		.data = &meson_secure_s4_pwrc_data,
-- 
2.37.1

[PATCH V2 3/4] soc: c3: Add support for power domains controller

[Xianwei Zhao]

Add support for C3 Power controller. C3 power control
registers are in secure domain, and should be accessed by SMC.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: Fixed some formatting.
---
 drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
index c11d65a3e3d9..a1ffebf70de3 100644
--- a/drivers/soc/amlogic/meson-secure-pwrc.c
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <dt-bindings/power/meson-a1-power.h>
+#include <dt-bindings/power/amlogic,c3-pwrc.h>
 #include <dt-bindings/power/meson-s4-power.h>
 #include <linux/arm-smccc.h>
 #include <linux/firmware/meson/meson_sm.h>
@@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
 	SEC_PD(RSA,	0),
 };
 
+static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
+	SEC_PD(C3_NNA,	0),
+	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(C3_VCODEC,	0),
+};
+
 static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
 	SEC_PD(S4_DOS_HEVC,	0),
 	SEC_PD(S4_DOS_VDEC,	0),
@@ -202,6 +219,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
 	.count = ARRAY_SIZE(a1_pwrc_domains),
 };
 
+static struct meson_secure_pwrc_domain_data amlogic_secure_c3_pwrc_data = {
+	.domains = c3_pwrc_domains,
+	.count = ARRAY_SIZE(c3_pwrc_domains),
+};
+
 static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
 	.domains = s4_pwrc_domains,
 	.count = ARRAY_SIZE(s4_pwrc_domains),
@@ -212,6 +234,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
 		.compatible = "amlogic,meson-a1-pwrc",
 		.data = &meson_secure_a1_pwrc_data,
 	},
+	{
+		.compatible = "amlogic,c3-pwrc",
+		.data = &amlogic_secure_c3_pwrc_data,
+	},
 	{
 		.compatible = "amlogic,meson-s4-pwrc",
 		.data = &meson_secure_s4_pwrc_data,
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 3/4] soc: c3: Add support for power domains controller

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> Add support for C3 Power controller. C3 power control
> registers are in secure domain, and should be accessed by SMC.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: Fixed some formatting.
> ---
>   drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index c11d65a3e3d9..a1ffebf70de3 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -11,6 +11,7 @@
>   #include <linux/platform_device.h>
>   #include <linux/pm_domain.h>
>   #include <dt-bindings/power/meson-a1-power.h>
> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>   #include <dt-bindings/power/meson-s4-power.h>
>   #include <linux/arm-smccc.h>
>   #include <linux/firmware/meson/meson_sm.h>
> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>   	SEC_PD(RSA,	0),
>   };
>   
> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
> +	SEC_PD(C3_NNA,	0),
> +	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_VCODEC,	0),
> +};
> +
>   static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
>   	SEC_PD(S4_DOS_HEVC,	0),
>   	SEC_PD(S4_DOS_VDEC,	0),
> @@ -202,6 +219,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
>   	.count = ARRAY_SIZE(a1_pwrc_domains),
>   };
>   
> +static struct meson_secure_pwrc_domain_data amlogic_secure_c3_pwrc_data = {
> +	.domains = c3_pwrc_domains,
> +	.count = ARRAY_SIZE(c3_pwrc_domains),
> +};
> +
>   static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
>   	.domains = s4_pwrc_domains,
>   	.count = ARRAY_SIZE(s4_pwrc_domains),
> @@ -212,6 +234,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
>   		.compatible = "amlogic,meson-a1-pwrc",
>   		.data = &meson_secure_a1_pwrc_data,
>   	},
> +	{
> +		.compatible = "amlogic,c3-pwrc",
> +		.data = &amlogic_secure_c3_pwrc_data,
> +	},
>   	{
>   		.compatible = "amlogic,meson-s4-pwrc",
>   		.data = &meson_secure_s4_pwrc_data,

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH V2 3/4] soc: c3: Add support for power domains controller

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> Add support for C3 Power controller. C3 power control
> registers are in secure domain, and should be accessed by SMC.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: Fixed some formatting.
> ---
>   drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index c11d65a3e3d9..a1ffebf70de3 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -11,6 +11,7 @@
>   #include <linux/platform_device.h>
>   #include <linux/pm_domain.h>
>   #include <dt-bindings/power/meson-a1-power.h>
> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>   #include <dt-bindings/power/meson-s4-power.h>
>   #include <linux/arm-smccc.h>
>   #include <linux/firmware/meson/meson_sm.h>
> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>   	SEC_PD(RSA,	0),
>   };
>   
> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
> +	SEC_PD(C3_NNA,	0),
> +	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_VCODEC,	0),
> +};
> +
>   static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
>   	SEC_PD(S4_DOS_HEVC,	0),
>   	SEC_PD(S4_DOS_VDEC,	0),
> @@ -202,6 +219,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
>   	.count = ARRAY_SIZE(a1_pwrc_domains),
>   };
>   
> +static struct meson_secure_pwrc_domain_data amlogic_secure_c3_pwrc_data = {
> +	.domains = c3_pwrc_domains,
> +	.count = ARRAY_SIZE(c3_pwrc_domains),
> +};
> +
>   static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
>   	.domains = s4_pwrc_domains,
>   	.count = ARRAY_SIZE(s4_pwrc_domains),
> @@ -212,6 +234,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
>   		.compatible = "amlogic,meson-a1-pwrc",
>   		.data = &meson_secure_a1_pwrc_data,
>   	},
> +	{
> +		.compatible = "amlogic,c3-pwrc",
> +		.data = &amlogic_secure_c3_pwrc_data,
> +	},
>   	{
>   		.compatible = "amlogic,meson-s4-pwrc",
>   		.data = &meson_secure_s4_pwrc_data,

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 3/4] soc: c3: Add support for power domains controller

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> Add support for C3 Power controller. C3 power control
> registers are in secure domain, and should be accessed by SMC.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: Fixed some formatting.
> ---
>   drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index c11d65a3e3d9..a1ffebf70de3 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -11,6 +11,7 @@
>   #include <linux/platform_device.h>
>   #include <linux/pm_domain.h>
>   #include <dt-bindings/power/meson-a1-power.h>
> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>   #include <dt-bindings/power/meson-s4-power.h>
>   #include <linux/arm-smccc.h>
>   #include <linux/firmware/meson/meson_sm.h>
> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>   	SEC_PD(RSA,	0),
>   };
>   
> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
> +	SEC_PD(C3_NNA,	0),
> +	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_VCODEC,	0),
> +};
> +
>   static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
>   	SEC_PD(S4_DOS_HEVC,	0),
>   	SEC_PD(S4_DOS_VDEC,	0),
> @@ -202,6 +219,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
>   	.count = ARRAY_SIZE(a1_pwrc_domains),
>   };
>   
> +static struct meson_secure_pwrc_domain_data amlogic_secure_c3_pwrc_data = {
> +	.domains = c3_pwrc_domains,
> +	.count = ARRAY_SIZE(c3_pwrc_domains),
> +};
> +
>   static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
>   	.domains = s4_pwrc_domains,
>   	.count = ARRAY_SIZE(s4_pwrc_domains),
> @@ -212,6 +234,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
>   		.compatible = "amlogic,meson-a1-pwrc",
>   		.data = &meson_secure_a1_pwrc_data,
>   	},
> +	{
> +		.compatible = "amlogic,c3-pwrc",
> +		.data = &amlogic_secure_c3_pwrc_data,
> +	},
>   	{
>   		.compatible = "amlogic,meson-s4-pwrc",
>   		.data = &meson_secure_s4_pwrc_data,

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 3/4] soc: c3: Add support for power domains controller

[Kevin Hilman]

Xianwei Zhao <xianwei.zhao@amlogic.com> writes:

> Add support for C3 Power controller. C3 power control
> registers are in secure domain, and should be accessed by SMC.
>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: Fixed some formatting.
> ---
>  drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index c11d65a3e3d9..a1ffebf70de3 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -11,6 +11,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/pm_domain.h>
>  #include <dt-bindings/power/meson-a1-power.h>
> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>  #include <dt-bindings/power/meson-s4-power.h>
>  #include <linux/arm-smccc.h>
>  #include <linux/firmware/meson/meson_sm.h>
> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>  	SEC_PD(RSA,	0),
>  };
>  
> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
> +	SEC_PD(C3_NNA,	0),
> +	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_VCODEC,	0),
> +};

All of these domains being hard-coded to ALWAYS_ON looks suspicious, and
can also be an indicator that the drivers for these domains are not
(properly) using runtime PM, or not connected to the correct domains the DT.

Similar to the tables for s4 and a1 in this same file, please describe
the reason that each of these domains needs to be hard coded to be
always on.

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH V2 3/4] soc: c3: Add support for power domains controller

[Kevin Hilman]

Xianwei Zhao <xianwei.zhao@amlogic.com> writes:

> Add support for C3 Power controller. C3 power control
> registers are in secure domain, and should be accessed by SMC.
>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: Fixed some formatting.
> ---
>  drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index c11d65a3e3d9..a1ffebf70de3 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -11,6 +11,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/pm_domain.h>
>  #include <dt-bindings/power/meson-a1-power.h>
> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>  #include <dt-bindings/power/meson-s4-power.h>
>  #include <linux/arm-smccc.h>
>  #include <linux/firmware/meson/meson_sm.h>
> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>  	SEC_PD(RSA,	0),
>  };
>  
> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
> +	SEC_PD(C3_NNA,	0),
> +	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_VCODEC,	0),
> +};

All of these domains being hard-coded to ALWAYS_ON looks suspicious, and
can also be an indicator that the drivers for these domains are not
(properly) using runtime PM, or not connected to the correct domains the DT.

Similar to the tables for s4 and a1 in this same file, please describe
the reason that each of these domains needs to be hard coded to be
always on.

Thanks,

Kevin

Re: [PATCH V2 3/4] soc: c3: Add support for power domains controller

[Xianwei Zhao]

Hi Kevin,
      Thanks for your reply.

On 2023/7/27 06:40, Kevin Hilman wrote:
> [ EXTERNAL EMAIL ]
> 
> Xianwei Zhao <xianwei.zhao@amlogic.com> writes:
> 
>> Add support for C3 Power controller. C3 power control
>> registers are in secure domain, and should be accessed by SMC.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>> V1 -> V2: Fixed some formatting.
>> ---
>>   drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>
>> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
>> index c11d65a3e3d9..a1ffebf70de3 100644
>> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
>> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
>> @@ -11,6 +11,7 @@
>>   #include <linux/platform_device.h>
>>   #include <linux/pm_domain.h>
>>   #include <dt-bindings/power/meson-a1-power.h>
>> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>>   #include <dt-bindings/power/meson-s4-power.h>
>>   #include <linux/arm-smccc.h>
>>   #include <linux/firmware/meson/meson_sm.h>
>> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>>        SEC_PD(RSA,     0),
>>   };
>>
>> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
>> +     SEC_PD(C3_NNA,  0),
>> +     SEC_PD(C3_AUDIO,        GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_SDIOA,        GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_EMMC, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_SDCARD,       GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_ETH,  GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_GE2D, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_CVE,  GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_GDC_WRAP,     GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_ISP_TOP,              GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_VCODEC,       0),
>> +};
> 
> All of these domains being hard-coded to ALWAYS_ON looks suspicious, and
> can also be an indicator that the drivers for these domains are not
> (properly) using runtime PM, or not connected to the correct domains the DT.
> 
> Similar to the tables for s4 and a1 in this same file, please describe
> the reason that each of these domains needs to be hard coded to be
> always on.
Will do.
> 
> Thanks,
> 
> Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH V2 3/4] soc: c3: Add support for power domains controller

[Xianwei Zhao]

Hi Kevin,
      Thanks for your reply.

On 2023/7/27 06:40, Kevin Hilman wrote:
> [ EXTERNAL EMAIL ]
> 
> Xianwei Zhao <xianwei.zhao@amlogic.com> writes:
> 
>> Add support for C3 Power controller. C3 power control
>> registers are in secure domain, and should be accessed by SMC.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>> V1 -> V2: Fixed some formatting.
>> ---
>>   drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>
>> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
>> index c11d65a3e3d9..a1ffebf70de3 100644
>> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
>> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
>> @@ -11,6 +11,7 @@
>>   #include <linux/platform_device.h>
>>   #include <linux/pm_domain.h>
>>   #include <dt-bindings/power/meson-a1-power.h>
>> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>>   #include <dt-bindings/power/meson-s4-power.h>
>>   #include <linux/arm-smccc.h>
>>   #include <linux/firmware/meson/meson_sm.h>
>> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>>        SEC_PD(RSA,     0),
>>   };
>>
>> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
>> +     SEC_PD(C3_NNA,  0),
>> +     SEC_PD(C3_AUDIO,        GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_SDIOA,        GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_EMMC, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_SDCARD,       GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_ETH,  GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_GE2D, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_CVE,  GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_GDC_WRAP,     GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_ISP_TOP,              GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_VCODEC,       0),
>> +};
> 
> All of these domains being hard-coded to ALWAYS_ON looks suspicious, and
> can also be an indicator that the drivers for these domains are not
> (properly) using runtime PM, or not connected to the correct domains the DT.
> 
> Similar to the tables for s4 and a1 in this same file, please describe
> the reason that each of these domains needs to be hard coded to be
> always on.
Will do.
> 
> Thanks,
> 
> Kevin

Re: [PATCH V2 3/4] soc: c3: Add support for power domains controller

[Xianwei Zhao]

Hi Kevin,
      Thanks for your reply.

On 2023/7/27 06:40, Kevin Hilman wrote:
> [ EXTERNAL EMAIL ]
> 
> Xianwei Zhao <xianwei.zhao@amlogic.com> writes:
> 
>> Add support for C3 Power controller. C3 power control
>> registers are in secure domain, and should be accessed by SMC.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>> V1 -> V2: Fixed some formatting.
>> ---
>>   drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>
>> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
>> index c11d65a3e3d9..a1ffebf70de3 100644
>> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
>> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
>> @@ -11,6 +11,7 @@
>>   #include <linux/platform_device.h>
>>   #include <linux/pm_domain.h>
>>   #include <dt-bindings/power/meson-a1-power.h>
>> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>>   #include <dt-bindings/power/meson-s4-power.h>
>>   #include <linux/arm-smccc.h>
>>   #include <linux/firmware/meson/meson_sm.h>
>> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>>        SEC_PD(RSA,     0),
>>   };
>>
>> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
>> +     SEC_PD(C3_NNA,  0),
>> +     SEC_PD(C3_AUDIO,        GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_SDIOA,        GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_EMMC, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_SDCARD,       GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_ETH,  GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_GE2D, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_CVE,  GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_GDC_WRAP,     GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_ISP_TOP,              GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(C3_VCODEC,       0),
>> +};
> 
> All of these domains being hard-coded to ALWAYS_ON looks suspicious, and
> can also be an indicator that the drivers for these domains are not
> (properly) using runtime PM, or not connected to the correct domains the DT.
> 
> Similar to the tables for s4 and a1 in this same file, please describe
> the reason that each of these domains needs to be hard coded to be
> always on.
Will do.
> 
> Thanks,
> 
> Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 4/4] arm64: dts: add support for C3 power domain controller

[Xianwei Zhao]

Enable power domain controller for Amlogic C3 SoC

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: delete status,use "okay" status by default.
---
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 60ad4f3eef9d..f6603fd57551 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -47,6 +47,15 @@ xtal: xtal-clk {
 		#clock-cells = <0>;
 	};
 
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,c3-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
2.37.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH V2 4/4] arm64: dts: add support for C3 power domain controller

[Xianwei Zhao]

Enable power domain controller for Amlogic C3 SoC

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: delete status,use "okay" status by default.
---
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 60ad4f3eef9d..f6603fd57551 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -47,6 +47,15 @@ xtal: xtal-clk {
 		#clock-cells = <0>;
 	};
 
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,c3-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
2.37.1

[PATCH V2 4/4] arm64: dts: add support for C3 power domain controller

[Xianwei Zhao]

Enable power domain controller for Amlogic C3 SoC

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: delete status,use "okay" status by default.
---
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 60ad4f3eef9d..f6603fd57551 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -47,6 +47,15 @@ xtal: xtal-clk {
 		#clock-cells = <0>;
 	};
 
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,c3-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 4/4] arm64: dts: add support for C3 power domain controller

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> Enable power domain controller for Amlogic C3 SoC
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: delete status,use "okay" status by default.
> ---
>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index 60ad4f3eef9d..f6603fd57551 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -47,6 +47,15 @@ xtal: xtal-clk {
>   		#clock-cells = <0>;
>   	};
>   
> +	sm: secure-monitor {
> +		compatible = "amlogic,meson-gxbb-sm";
> +
> +		pwrc: power-controller {
> +			compatible = "amlogic,c3-pwrc";
> +			#power-domain-cells = <1>;
> +		};
> +	};
> +
>   	soc {
>   		compatible = "simple-bus";
>   		#address-cells = <2>;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH V2 4/4] arm64: dts: add support for C3 power domain controller

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> Enable power domain controller for Amlogic C3 SoC
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: delete status,use "okay" status by default.
> ---
>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index 60ad4f3eef9d..f6603fd57551 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -47,6 +47,15 @@ xtal: xtal-clk {
>   		#clock-cells = <0>;
>   	};
>   
> +	sm: secure-monitor {
> +		compatible = "amlogic,meson-gxbb-sm";
> +
> +		pwrc: power-controller {
> +			compatible = "amlogic,c3-pwrc";
> +			#power-domain-cells = <1>;
> +		};
> +	};
> +
>   	soc {
>   		compatible = "simple-bus";
>   		#address-cells = <2>;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 4/4] arm64: dts: add support for C3 power domain controller

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> Enable power domain controller for Amlogic C3 SoC
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: delete status,use "okay" status by default.
> ---
>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index 60ad4f3eef9d..f6603fd57551 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -47,6 +47,15 @@ xtal: xtal-clk {
>   		#clock-cells = <0>;
>   	};
>   
> +	sm: secure-monitor {
> +		compatible = "amlogic,meson-gxbb-sm";
> +
> +		pwrc: power-controller {
> +			compatible = "amlogic,c3-pwrc";
> +			#power-domain-cells = <1>;
> +		};
> +	};
> +
>   	soc {
>   		compatible = "simple-bus";
>   		#address-cells = <2>;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH V2 0/4] Power: C3: add power domain driver

[Neil Armstrong]

Hi,

On Fri, 07 Jul 2023 08:37:06 +0800, Xianwei Zhao wrote:
> First patch is that Use 'name' instead of 'index' as criterion.
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero.
> 
> Other patchs adds power controller driver support for Amlogic C3 SoC.
> The power domains registers can be accessed in the secure world only.
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.6/arm64-dt)

[4/4] arm64: dts: add support for C3 power domain controller
      https://git.kernel.org/amlogic/c/22a9b2a488c3f0937fe0c57c96176cbea0953c20

These changes has been applied on the intermediate git tree [1].

The v6.6/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: (subset) [PATCH V2 0/4] Power: C3: add power domain driver

[Neil Armstrong]

Hi,

On Fri, 07 Jul 2023 08:37:06 +0800, Xianwei Zhao wrote:
> First patch is that Use 'name' instead of 'index' as criterion.
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero.
> 
> Other patchs adds power controller driver support for Amlogic C3 SoC.
> The power domains registers can be accessed in the secure world only.
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.6/arm64-dt)

[4/4] arm64: dts: add support for C3 power domain controller
      https://git.kernel.org/amlogic/c/22a9b2a488c3f0937fe0c57c96176cbea0953c20

These changes has been applied on the intermediate git tree [1].

The v6.6/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil

Re: (subset) [PATCH V2 0/4] Power: C3: add power domain driver

[Neil Armstrong]

Hi,

On Fri, 07 Jul 2023 08:37:06 +0800, Xianwei Zhao wrote:
> First patch is that Use 'name' instead of 'index' as criterion.
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero.
> 
> Other patchs adds power controller driver support for Amlogic C3 SoC.
> The power domains registers can be accessed in the secure world only.
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.6/arm64-dt)

[4/4] arm64: dts: add support for C3 power domain controller
      https://git.kernel.org/amlogic/c/22a9b2a488c3f0937fe0c57c96176cbea0953c20

These changes has been applied on the intermediate git tree [1].

The v6.6/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH V2 0/4] Power: C3: add power domain driver

[Neil Armstrong]

Hi,

On Fri, 07 Jul 2023 08:37:06 +0800, Xianwei Zhao wrote:
> First patch is that Use 'name' instead of 'index' as criterion.
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero.
> 
> Other patchs adds power controller driver support for Amlogic C3 SoC.
> The power domains registers can be accessed in the secure world only.
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.6/drivers-genpd)

[1/4] soc: amlogic: use name instead of index as criterion
      https://git.kernel.org/amlogic/c/fadf18180022743ff74b1f6ca4f3cff462ddaddb
[2/4] dt-bindings: power: add Amlogic C3 power domains
      https://git.kernel.org/amlogic/c/83b03d62939c46c118a8d722f07ae03a87967b00
[3/4] soc: c3: Add support for power domains controller
      https://git.kernel.org/amlogic/c/77e2f4e3cbd5cde442d05a7bdb6cd01565bead6d

These changes has been applied on the intermediate git tree [1].

The v6.6/drivers-genpd branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: (subset) [PATCH V2 0/4] Power: C3: add power domain driver

[Neil Armstrong]

Hi,

On Fri, 07 Jul 2023 08:37:06 +0800, Xianwei Zhao wrote:
> First patch is that Use 'name' instead of 'index' as criterion.
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero.
> 
> Other patchs adds power controller driver support for Amlogic C3 SoC.
> The power domains registers can be accessed in the secure world only.
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.6/drivers-genpd)

[1/4] soc: amlogic: use name instead of index as criterion
      https://git.kernel.org/amlogic/c/fadf18180022743ff74b1f6ca4f3cff462ddaddb
[2/4] dt-bindings: power: add Amlogic C3 power domains
      https://git.kernel.org/amlogic/c/83b03d62939c46c118a8d722f07ae03a87967b00
[3/4] soc: c3: Add support for power domains controller
      https://git.kernel.org/amlogic/c/77e2f4e3cbd5cde442d05a7bdb6cd01565bead6d

These changes has been applied on the intermediate git tree [1].

The v6.6/drivers-genpd branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil

Re: (subset) [PATCH V2 0/4] Power: C3: add power domain driver

[Neil Armstrong]

Hi,

On Fri, 07 Jul 2023 08:37:06 +0800, Xianwei Zhao wrote:
> First patch is that Use 'name' instead of 'index' as criterion.
> The  variate 'index' could be equal to zero in some SoCs. Such as C3 SoC,
> PWRC_C3_NNA_ID be defined zero.
> 
> Other patchs adds power controller driver support for Amlogic C3 SoC.
> The power domains registers can be accessed in the secure world only.
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.6/drivers-genpd)

[1/4] soc: amlogic: use name instead of index as criterion
      https://git.kernel.org/amlogic/c/fadf18180022743ff74b1f6ca4f3cff462ddaddb
[2/4] dt-bindings: power: add Amlogic C3 power domains
      https://git.kernel.org/amlogic/c/83b03d62939c46c118a8d722f07ae03a87967b00
[3/4] soc: c3: Add support for power domains controller
      https://git.kernel.org/amlogic/c/77e2f4e3cbd5cde442d05a7bdb6cd01565bead6d

These changes has been applied on the intermediate git tree [1].

The v6.6/drivers-genpd branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel