Re: [PATCH] arm64: dts: meson: remove CPU opps below 1GHz for G12B/SM1

[Kevin Hilman <khilman@baylibre.com>]

Christian Hewitt <christianshewitt@gmail.com> writes:

> Amlogic G12B and SM1 devices experience CPU stalls and random board
> wedges when the system idles and CPU cores clock down to lower opp
> points. Recent vendor kernels include a change to remove 100-250MHz
> (with no explanation) [0] but other downstream sources also remove
> the 500/667MHz points (also with no explanation). Unless 100-667Mhz
> opps are removed or the CPU governor forced to performance, stalls
> are observed, so let's remove them an improve stability/uptime.
>
> [0] https://github.com/khadas/linux/commit/20e237a4fe9f0302370e24950cb1416e038eee03

hehe, not a very helpful changelog in that khadas kernel commit :(

> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> Numerous people have experienced this issue and I have tested with
> only the low opp-points removed and numerous voltage tweaks: but it
> makes no difference. With the opp points present an Odroid N2 or
> Khadas VIM3 reliably drop off my network after being left idling
> overnight with UART showing a CPU stall splat. With the opp points
> removed I see weeks of uninterupted uptime. It's beyond my skills
> to research what the cause of the stalls might be, but if anyone
> ever figures it out we can always restore things. NB: This issue
> is not too widely reported in forums, but that's largely because
> most of the Amlogic supporting distros have been including this
> change picked from my kernel patchset for some time.

Very interesting.  I've also noticed instability across suspend resume
on VIM3/VIM3L and only got as far in debugging to noticing it was
DVFS/OPP related, but didn't get much further yet.  I'll give this a try
to see if it helps.

Thanks for finding & posting!

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic