Re: [PATCH v3 1/2] pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins

[Kevin Hilman <khilman@baylibre.com>]

Emiliano Ingrassia <ingrassia@epigenesys.com> writes:

> Hi Kevin,
>
> sorry to bother you.

No need to apologize.

> On Thu, Jan 10, 2019 at 05:08:39PM -0800, Kevin Hilman wrote:
>> Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
>>
>> > Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines.
>> > Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to
>> > rely on the bootloader to set them up correctly.
>> >
>> > The vendor u-boot sources for Odroid-C1 use the following Ethernet
>> > pinmux configuration:
>> >   SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
>> >   SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
>> > This translates to the following pin groups in the mainline kernel:
>> > - register 6 bit  0: eth_rxd1 (DIF_0_P)
>> > - register 6 bit  1: eth_rxd0 (DIF_0_N)
>> > - register 6 bit  2: eth_rx_dv (DIF_1_P)
>> > - register 6 bit  3: eth_rx_clk (DIF_1_N)
>> > - register 6 bit  6: eth_tx_en (DIF_3_P)
>> > - register 6 bit  8: eth_ref_clk (DIF_3_N)
>> > - register 6 bit  9: eth_mdc (DIF_4_P)
>> > - register 6 bit 10: eth_mdio_en (DIF_4_N)
>> > - register 6 bit 11: eth_tx_clk (GPIOH_9)
>> > - register 6 bit 12: eth_txd2 (GPIOH_8)
>> > - register 6 bit 13: eth_txd3 (GPIOH_7)
>> > - register 7 bit 20: eth_txd0_0 (GPIOH_6)
>> > - register 7 bit 21: eth_txd1_0 (GPIOH_5)
>> > - register 7 bit 22: eth_rxd3 (DIF_2_P)
>> > - register 7 bit 23: eth_rxd2 (DIF_2_N)
>> >
>> > All functions except eth_rxd2 and eth_rxd3 are already supported by the
>> > pinctrl-meson8b driver.
>> >
>> > Suggested-by: Jianxin Pan <jianxin.pan@amlogic.com>
>> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>>
>> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
>
> For both patches of this series I gave:
> Tested-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
> Reviewed-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
>
> They were in the answer to the cover letter of this series.
> I note that they were not included in the commit message of the first patch.
>
> Did I miss something or did something wrong?
> Please, let me know.

You did everything fine, I just missed them.

I've started relying a bit more heavily on patchwork to collect
review/test tags, and right now it doesn't notice tags to the
cover-letter, only to individual patches, so I typically add those by
hand, but in this case I missed them.

Sorry about that, and thanks for the reminder.  I'll add them and
repush.

And, while I'm thinking about it, I'll request that feature to patchwork
developers.

Kevin



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic