All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH 5/5] arm64: dts: meson: sei510: add network support
Date: Mon, 13 May 2019 09:31:30 -0700	[thread overview]
Message-ID: <7hftpico4d.fsf@baylibre.com> (raw)
In-Reply-To: <bf1360ab62a4e7bd3928052ebb6c969e8059f29e.camel@baylibre.com>

Jerome Brunet <jbrunet@baylibre.com> writes:

> On Fri, 2019-05-10 at 15:45 -0700, Kevin Hilman wrote:
>> Jerome Brunet <jbrunet@baylibre.com> writes:
>> 
>> > Enable the network interface of the SEI510 which use the internal PHY.
>> > 
>> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> 
>> I tried testing this series on SEI510, but I must still be missing some
>> defconfig options, as the default defconfig doesn't lead to a working
>> interface.
>
> That's weird. AFAICT, the net part has hit Linus's tree.

Ah, that's the key ingredient.  I was testing with a v5.1 baseline (not
linus/master) along with all my queued up changes.  I just pulled in
linus/master to test this series, and indeed, everything works, and I
don't need my config fragment either.

Thanks for clarifying.

If repost needed, feel free to add

Tested-by: Kevin Hilman <khilman@baylibre.com>

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH 5/5] arm64: dts: meson: sei510: add network support
Date: Mon, 13 May 2019 09:31:30 -0700	[thread overview]
Message-ID: <7hftpico4d.fsf@baylibre.com> (raw)
In-Reply-To: <bf1360ab62a4e7bd3928052ebb6c969e8059f29e.camel@baylibre.com>

Jerome Brunet <jbrunet@baylibre.com> writes:

> On Fri, 2019-05-10 at 15:45 -0700, Kevin Hilman wrote:
>> Jerome Brunet <jbrunet@baylibre.com> writes:
>> 
>> > Enable the network interface of the SEI510 which use the internal PHY.
>> > 
>> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> 
>> I tried testing this series on SEI510, but I must still be missing some
>> defconfig options, as the default defconfig doesn't lead to a working
>> interface.
>
> That's weird. AFAICT, the net part has hit Linus's tree.

Ah, that's the key ingredient.  I was testing with a v5.1 baseline (not
linus/master) along with all my queued up changes.  I just pulled in
linus/master to test this series, and indeed, everything works, and I
don't need my config fragment either.

Thanks for clarifying.

If repost needed, feel free to add

Tested-by: Kevin Hilman <khilman@baylibre.com>

Kevin

  reply	other threads:[~2019-05-13 16:31 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-10 16:49 [PATCH 0/5] arm64: dts: meson: g12a: add network support Jerome Brunet
2019-05-10 16:49 ` Jerome Brunet
2019-05-10 16:49 ` [PATCH 1/5] arm64: dts: meson: g12a: add ethernet mac controller Jerome Brunet
2019-05-10 16:49   ` Jerome Brunet
2019-05-10 16:49 ` [PATCH 2/5] arm64: dts: meson: g12a: add ethernet pinctrl definitions Jerome Brunet
2019-05-10 16:49   ` Jerome Brunet
2019-05-11 17:06   ` Martin Blumenstingl
2019-05-11 17:06     ` Martin Blumenstingl
2019-05-11 17:27     ` Jerome Brunet
2019-05-11 17:27       ` Jerome Brunet
2019-05-15  0:10       ` Kevin Hilman
2019-05-15  0:10         ` Kevin Hilman
2019-05-10 16:49 ` [PATCH 3/5] arm64: dts: meson: g12a: add mdio multiplexer Jerome Brunet
2019-05-10 16:49   ` Jerome Brunet
2019-05-11 16:59   ` Martin Blumenstingl
2019-05-11 16:59     ` Martin Blumenstingl
2019-05-11 17:30     ` Jerome Brunet
2019-05-11 17:30       ` Jerome Brunet
2019-05-10 16:49 ` [PATCH 4/5] arm64: dts: meson: u200: add internal network Jerome Brunet
2019-05-10 16:49   ` Jerome Brunet
2019-05-10 16:49 ` [PATCH 5/5] arm64: dts: meson: sei510: add network support Jerome Brunet
2019-05-10 16:49   ` Jerome Brunet
2019-05-10 22:45   ` Kevin Hilman
2019-05-10 22:45     ` Kevin Hilman
2019-05-10 22:45     ` Kevin Hilman
2019-05-11 15:46     ` Jerome Brunet
2019-05-11 15:46       ` Jerome Brunet
2019-05-13 16:31       ` Kevin Hilman [this message]
2019-05-13 16:31         ` Kevin Hilman
2019-05-11 17:16     ` Martin Blumenstingl
2019-05-11 17:16       ` Martin Blumenstingl
2019-05-11 17:25       ` Jerome Brunet
2019-05-11 17:25         ` Jerome Brunet
2019-05-10 16:52 ` [PATCH 0/5] arm64: dts: meson: g12a: " Jerome Brunet
2019-05-10 16:52   ` Jerome Brunet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7hftpico4d.fsf@baylibre.com \
    --to=khilman@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.