* [PATCH] ARM64: dts: amlogic: use generic bus node names
@ 2017-12-06 19:30 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2017-12-06 19:30 UTC (permalink / raw)
To: linus-amlogic
The DT spec recommends that node-names have generic names like "bus".
Fix that in the Amlogic DTs, while leaving the label names to have more
SoC-specific names that match with the HW documentation.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..e7213eb53958 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -113,7 +113,7 @@
#size-cells = <2>;
ranges;
- cbus: cbus at ffd00000 {
+ cbus: bus at ffd00000 {
compatible = "simple-bus";
reg = <0x0 0xffd00000 0x0 0x25000>;
#address-cells = <2>;
@@ -175,7 +175,7 @@
};
};
- aobus: aobus at ff800000 {
+ aobus: bus at ff800000 {
compatible = "simple-bus";
reg = <0x0 0xff800000 0x0 0x100000>;
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 7cdbf58a062f..6cb3c2a52baf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -211,7 +211,7 @@
#size-cells = <2>;
ranges;
- cbus: cbus at c1100000 {
+ cbus: bus at c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
#address-cells = <2>;
@@ -366,7 +366,7 @@
};
};
- aobus: aobus at c8100000 {
+ aobus: bus at c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
#address-cells = <2>;
@@ -453,7 +453,7 @@
};
};
- hiubus: hiubus at c883c000 {
+ hiubus: bus at c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
#address-cells = <2>;
--
2.11.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH] ARM64: dts: amlogic: use generic bus node names
@ 2017-12-06 19:30 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2017-12-06 19:30 UTC (permalink / raw)
To: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Stephen Boyd
The DT spec recommends that node-names have generic names like "bus".
Fix that in the Amlogic DTs, while leaving the label names to have more
SoC-specific names that match with the HW documentation.
Suggested-by: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Signed-off-by: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..e7213eb53958 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -113,7 +113,7 @@
#size-cells = <2>;
ranges;
- cbus: cbus@ffd00000 {
+ cbus: bus@ffd00000 {
compatible = "simple-bus";
reg = <0x0 0xffd00000 0x0 0x25000>;
#address-cells = <2>;
@@ -175,7 +175,7 @@
};
};
- aobus: aobus@ff800000 {
+ aobus: bus@ff800000 {
compatible = "simple-bus";
reg = <0x0 0xff800000 0x0 0x100000>;
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 7cdbf58a062f..6cb3c2a52baf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -211,7 +211,7 @@
#size-cells = <2>;
ranges;
- cbus: cbus@c1100000 {
+ cbus: bus@c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
#address-cells = <2>;
@@ -366,7 +366,7 @@
};
};
- aobus: aobus@c8100000 {
+ aobus: bus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
#address-cells = <2>;
@@ -453,7 +453,7 @@
};
};
- hiubus: hiubus@c883c000 {
+ hiubus: bus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
#address-cells = <2>;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH] ARM64: dts: amlogic: use generic bus node names
@ 2017-12-06 19:30 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2017-12-06 19:30 UTC (permalink / raw)
To: linux-arm-kernel
The DT spec recommends that node-names have generic names like "bus".
Fix that in the Amlogic DTs, while leaving the label names to have more
SoC-specific names that match with the HW documentation.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..e7213eb53958 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -113,7 +113,7 @@
#size-cells = <2>;
ranges;
- cbus: cbus at ffd00000 {
+ cbus: bus at ffd00000 {
compatible = "simple-bus";
reg = <0x0 0xffd00000 0x0 0x25000>;
#address-cells = <2>;
@@ -175,7 +175,7 @@
};
};
- aobus: aobus at ff800000 {
+ aobus: bus at ff800000 {
compatible = "simple-bus";
reg = <0x0 0xff800000 0x0 0x100000>;
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 7cdbf58a062f..6cb3c2a52baf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -211,7 +211,7 @@
#size-cells = <2>;
ranges;
- cbus: cbus at c1100000 {
+ cbus: bus at c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
#address-cells = <2>;
@@ -366,7 +366,7 @@
};
};
- aobus: aobus at c8100000 {
+ aobus: bus at c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
#address-cells = <2>;
@@ -453,7 +453,7 @@
};
};
- hiubus: hiubus at c883c000 {
+ hiubus: bus at c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
#address-cells = <2>;
--
2.11.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH] ARM64: dts: amlogic: use generic bus node names
2017-12-06 19:30 ` Kevin Hilman
(?)
@ 2017-12-07 8:35 ` Neil Armstrong
-1 siblings, 0 replies; 9+ messages in thread
From: Neil Armstrong @ 2017-12-07 8:35 UTC (permalink / raw)
To: linus-amlogic
On 06/12/2017 20:30, Kevin Hilman wrote:
> The DT spec recommends that node-names have generic names like "bus".
> Fix that in the Amlogic DTs, while leaving the label names to have more
> SoC-specific names that match with the HW documentation.
>
> Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
> 2 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b932a784b02a..e7213eb53958 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -113,7 +113,7 @@
> #size-cells = <2>;
> ranges;
>
> - cbus: cbus at ffd00000 {
> + cbus: bus at ffd00000 {
> compatible = "simple-bus";
> reg = <0x0 0xffd00000 0x0 0x25000>;
> #address-cells = <2>;
> @@ -175,7 +175,7 @@
> };
> };
>
> - aobus: aobus at ff800000 {
> + aobus: bus at ff800000 {
> compatible = "simple-bus";
> reg = <0x0 0xff800000 0x0 0x100000>;
> #address-cells = <2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 7cdbf58a062f..6cb3c2a52baf 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -211,7 +211,7 @@
> #size-cells = <2>;
> ranges;
>
> - cbus: cbus at c1100000 {
> + cbus: bus at c1100000 {
> compatible = "simple-bus";
> reg = <0x0 0xc1100000 0x0 0x100000>;
> #address-cells = <2>;
> @@ -366,7 +366,7 @@
> };
> };
>
> - aobus: aobus at c8100000 {
> + aobus: bus at c8100000 {
> compatible = "simple-bus";
> reg = <0x0 0xc8100000 0x0 0x100000>;
> #address-cells = <2>;
> @@ -453,7 +453,7 @@
> };
> };
>
> - hiubus: hiubus at c883c000 {
> + hiubus: bus at c883c000 {
> compatible = "simple-bus";
> reg = <0x0 0xc883c000 0x0 0x2000>;
> #address-cells = <2>;
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] ARM64: dts: amlogic: use generic bus node names
@ 2017-12-07 8:35 ` Neil Armstrong
0 siblings, 0 replies; 9+ messages in thread
From: Neil Armstrong @ 2017-12-07 8:35 UTC (permalink / raw)
To: Kevin Hilman, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Stephen Boyd,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On 06/12/2017 20:30, Kevin Hilman wrote:
> The DT spec recommends that node-names have generic names like "bus".
> Fix that in the Amlogic DTs, while leaving the label names to have more
> SoC-specific names that match with the HW documentation.
>
> Suggested-by: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> Signed-off-by: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
> 2 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b932a784b02a..e7213eb53958 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -113,7 +113,7 @@
> #size-cells = <2>;
> ranges;
>
> - cbus: cbus@ffd00000 {
> + cbus: bus@ffd00000 {
> compatible = "simple-bus";
> reg = <0x0 0xffd00000 0x0 0x25000>;
> #address-cells = <2>;
> @@ -175,7 +175,7 @@
> };
> };
>
> - aobus: aobus@ff800000 {
> + aobus: bus@ff800000 {
> compatible = "simple-bus";
> reg = <0x0 0xff800000 0x0 0x100000>;
> #address-cells = <2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 7cdbf58a062f..6cb3c2a52baf 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -211,7 +211,7 @@
> #size-cells = <2>;
> ranges;
>
> - cbus: cbus@c1100000 {
> + cbus: bus@c1100000 {
> compatible = "simple-bus";
> reg = <0x0 0xc1100000 0x0 0x100000>;
> #address-cells = <2>;
> @@ -366,7 +366,7 @@
> };
> };
>
> - aobus: aobus@c8100000 {
> + aobus: bus@c8100000 {
> compatible = "simple-bus";
> reg = <0x0 0xc8100000 0x0 0x100000>;
> #address-cells = <2>;
> @@ -453,7 +453,7 @@
> };
> };
>
> - hiubus: hiubus@c883c000 {
> + hiubus: bus@c883c000 {
> compatible = "simple-bus";
> reg = <0x0 0xc883c000 0x0 0x2000>;
> #address-cells = <2>;
>
Reviewed-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH] ARM64: dts: amlogic: use generic bus node names
@ 2017-12-07 8:35 ` Neil Armstrong
0 siblings, 0 replies; 9+ messages in thread
From: Neil Armstrong @ 2017-12-07 8:35 UTC (permalink / raw)
To: linux-arm-kernel
On 06/12/2017 20:30, Kevin Hilman wrote:
> The DT spec recommends that node-names have generic names like "bus".
> Fix that in the Amlogic DTs, while leaving the label names to have more
> SoC-specific names that match with the HW documentation.
>
> Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
> 2 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b932a784b02a..e7213eb53958 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -113,7 +113,7 @@
> #size-cells = <2>;
> ranges;
>
> - cbus: cbus at ffd00000 {
> + cbus: bus at ffd00000 {
> compatible = "simple-bus";
> reg = <0x0 0xffd00000 0x0 0x25000>;
> #address-cells = <2>;
> @@ -175,7 +175,7 @@
> };
> };
>
> - aobus: aobus at ff800000 {
> + aobus: bus at ff800000 {
> compatible = "simple-bus";
> reg = <0x0 0xff800000 0x0 0x100000>;
> #address-cells = <2>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 7cdbf58a062f..6cb3c2a52baf 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -211,7 +211,7 @@
> #size-cells = <2>;
> ranges;
>
> - cbus: cbus at c1100000 {
> + cbus: bus at c1100000 {
> compatible = "simple-bus";
> reg = <0x0 0xc1100000 0x0 0x100000>;
> #address-cells = <2>;
> @@ -366,7 +366,7 @@
> };
> };
>
> - aobus: aobus at c8100000 {
> + aobus: bus at c8100000 {
> compatible = "simple-bus";
> reg = <0x0 0xc8100000 0x0 0x100000>;
> #address-cells = <2>;
> @@ -453,7 +453,7 @@
> };
> };
>
> - hiubus: hiubus at c883c000 {
> + hiubus: bus at c883c000 {
> compatible = "simple-bus";
> reg = <0x0 0xc883c000 0x0 0x2000>;
> #address-cells = <2>;
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH] ARM64: dts: amlogic: use generic bus node names
2017-12-07 8:35 ` Neil Armstrong
(?)
@ 2017-12-07 19:30 ` Kevin Hilman
-1 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2017-12-07 19:30 UTC (permalink / raw)
To: linus-amlogic
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 06/12/2017 20:30, Kevin Hilman wrote:
>> The DT spec recommends that node-names have generic names like "bus".
>> Fix that in the Amlogic DTs, while leaving the label names to have more
>> SoC-specific names that match with the HW documentation.
>>
>> Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
>> 2 files changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> index b932a784b02a..e7213eb53958 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> @@ -113,7 +113,7 @@
>> #size-cells = <2>;
>> ranges;
>>
>> - cbus: cbus at ffd00000 {
>> + cbus: bus at ffd00000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xffd00000 0x0 0x25000>;
>> #address-cells = <2>;
>> @@ -175,7 +175,7 @@
>> };
>> };
>>
>> - aobus: aobus at ff800000 {
>> + aobus: bus at ff800000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xff800000 0x0 0x100000>;
>> #address-cells = <2>;
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> index 7cdbf58a062f..6cb3c2a52baf 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> @@ -211,7 +211,7 @@
>> #size-cells = <2>;
>> ranges;
>>
>> - cbus: cbus at c1100000 {
>> + cbus: bus at c1100000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc1100000 0x0 0x100000>;
>> #address-cells = <2>;
>> @@ -366,7 +366,7 @@
>> };
>> };
>>
>> - aobus: aobus at c8100000 {
>> + aobus: bus at c8100000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc8100000 0x0 0x100000>;
>> #address-cells = <2>;
>> @@ -453,7 +453,7 @@
>> };
>> };
>>
>> - hiubus: hiubus at c883c000 {
>> + hiubus: bus at c883c000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc883c000 0x0 0x2000>;
>> #address-cells = <2>;
>>
>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Applied to v4.16/dt64 with Neil's review and after doing some basic
build/boot tests.
Thanks,
Kevin
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] ARM64: dts: amlogic: use generic bus node names
@ 2017-12-07 19:30 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2017-12-07 19:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Stephen Boyd,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> writes:
> On 06/12/2017 20:30, Kevin Hilman wrote:
>> The DT spec recommends that node-names have generic names like "bus".
>> Fix that in the Amlogic DTs, while leaving the label names to have more
>> SoC-specific names that match with the HW documentation.
>>
>> Suggested-by: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
>> Signed-off-by: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
>> 2 files changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> index b932a784b02a..e7213eb53958 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> @@ -113,7 +113,7 @@
>> #size-cells = <2>;
>> ranges;
>>
>> - cbus: cbus@ffd00000 {
>> + cbus: bus@ffd00000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xffd00000 0x0 0x25000>;
>> #address-cells = <2>;
>> @@ -175,7 +175,7 @@
>> };
>> };
>>
>> - aobus: aobus@ff800000 {
>> + aobus: bus@ff800000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xff800000 0x0 0x100000>;
>> #address-cells = <2>;
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> index 7cdbf58a062f..6cb3c2a52baf 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> @@ -211,7 +211,7 @@
>> #size-cells = <2>;
>> ranges;
>>
>> - cbus: cbus@c1100000 {
>> + cbus: bus@c1100000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc1100000 0x0 0x100000>;
>> #address-cells = <2>;
>> @@ -366,7 +366,7 @@
>> };
>> };
>>
>> - aobus: aobus@c8100000 {
>> + aobus: bus@c8100000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc8100000 0x0 0x100000>;
>> #address-cells = <2>;
>> @@ -453,7 +453,7 @@
>> };
>> };
>>
>> - hiubus: hiubus@c883c000 {
>> + hiubus: bus@c883c000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc883c000 0x0 0x2000>;
>> #address-cells = <2>;
>>
>
> Reviewed-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Applied to v4.16/dt64 with Neil's review and after doing some basic
build/boot tests.
Thanks,
Kevin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH] ARM64: dts: amlogic: use generic bus node names
@ 2017-12-07 19:30 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2017-12-07 19:30 UTC (permalink / raw)
To: linux-arm-kernel
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 06/12/2017 20:30, Kevin Hilman wrote:
>> The DT spec recommends that node-names have generic names like "bus".
>> Fix that in the Amlogic DTs, while leaving the label names to have more
>> SoC-specific names that match with the HW documentation.
>>
>> Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
>> 2 files changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> index b932a784b02a..e7213eb53958 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> @@ -113,7 +113,7 @@
>> #size-cells = <2>;
>> ranges;
>>
>> - cbus: cbus at ffd00000 {
>> + cbus: bus at ffd00000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xffd00000 0x0 0x25000>;
>> #address-cells = <2>;
>> @@ -175,7 +175,7 @@
>> };
>> };
>>
>> - aobus: aobus at ff800000 {
>> + aobus: bus at ff800000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xff800000 0x0 0x100000>;
>> #address-cells = <2>;
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> index 7cdbf58a062f..6cb3c2a52baf 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> @@ -211,7 +211,7 @@
>> #size-cells = <2>;
>> ranges;
>>
>> - cbus: cbus at c1100000 {
>> + cbus: bus at c1100000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc1100000 0x0 0x100000>;
>> #address-cells = <2>;
>> @@ -366,7 +366,7 @@
>> };
>> };
>>
>> - aobus: aobus at c8100000 {
>> + aobus: bus at c8100000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc8100000 0x0 0x100000>;
>> #address-cells = <2>;
>> @@ -453,7 +453,7 @@
>> };
>> };
>>
>> - hiubus: hiubus at c883c000 {
>> + hiubus: bus at c883c000 {
>> compatible = "simple-bus";
>> reg = <0x0 0xc883c000 0x0 0x2000>;
>> #address-cells = <2>;
>>
>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Applied to v4.16/dt64 with Neil's review and after doing some basic
build/boot tests.
Thanks,
Kevin
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-12-07 19:30 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-06 19:30 [PATCH] ARM64: dts: amlogic: use generic bus node names Kevin Hilman
2017-12-06 19:30 ` Kevin Hilman
2017-12-06 19:30 ` Kevin Hilman
2017-12-07 8:35 ` Neil Armstrong
2017-12-07 8:35 ` Neil Armstrong
2017-12-07 8:35 ` Neil Armstrong
2017-12-07 19:30 ` Kevin Hilman
2017-12-07 19:30 ` Kevin Hilman
2017-12-07 19:30 ` Kevin Hilman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.