* [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
@ 2019-09-05 13:50 ` Jerome Brunet
0 siblings, 0 replies; 14+ messages in thread
From: Jerome Brunet @ 2019-09-05 13:50 UTC (permalink / raw)
To: Philipp Zabel
Cc: Jerome Brunet, Kevin Hilman, linux-amlogic, devicetree,
linux-kernel
This patchset adds the new arb reset lines for the sm1 SoC family
It has been tested on the sei610 platform.
Changes since v1 [0]:
* Fix the mistake on the number of reset as reported by Phililpp (thx)
[0]: https://lkml.kernel.org/r/20190820094625.13455-1-jbrunet@baylibre.com
Jerome Brunet (2):
reset: dt-bindings: meson: update arb bindings for sm1
reset: meson-audio-arb: add sm1 support
.../reset/amlogic,meson-axg-audio-arb.txt | 3 +-
drivers/reset/reset-meson-audio-arb.c | 43 +++++++++++++++++--
.../reset/amlogic,meson-axg-audio-arb.h | 2 +
3 files changed, 44 insertions(+), 4 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 1/2] reset: dt-bindings: meson: update arb bindings for sm1
2019-09-05 13:50 ` Jerome Brunet
@ 2019-09-05 13:50 ` Jerome Brunet
-1 siblings, 0 replies; 14+ messages in thread
From: Jerome Brunet @ 2019-09-05 13:50 UTC (permalink / raw)
To: Philipp Zabel
Cc: Rob Herring, devicetree, Kevin Hilman, linux-kernel,
linux-amlogic, Jerome Brunet
SM1 SoC family adds two new audio FIFOs with the related arb reset lines
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt | 3 ++-
include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
index 26e542eb96df..43e580ef64ba 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
@@ -4,7 +4,8 @@ The Amlogic Audio ARB is a simple device which enables or
disables the access of Audio FIFOs to DDR on AXG based SoC.
Required properties:
-- compatible: 'amlogic,meson-axg-audio-arb'
+- compatible: 'amlogic,meson-axg-audio-arb' or
+ 'amlogic,meson-sm1-audio-arb'
- reg: physical base address of the controller and length of memory
mapped region.
- clocks: phandle to the fifo peripheral clock provided by the audio
diff --git a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
index 05c36367875c..1ef807856cb8 100644
--- a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
+++ b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
@@ -13,5 +13,7 @@
#define AXG_ARB_FRDDR_A 3
#define AXG_ARB_FRDDR_B 4
#define AXG_ARB_FRDDR_C 5
+#define AXG_ARB_TODDR_D 6
+#define AXG_ARB_FRDDR_D 7
#endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 1/2] reset: dt-bindings: meson: update arb bindings for sm1
@ 2019-09-05 13:50 ` Jerome Brunet
0 siblings, 0 replies; 14+ messages in thread
From: Jerome Brunet @ 2019-09-05 13:50 UTC (permalink / raw)
To: Philipp Zabel
Cc: Jerome Brunet, Kevin Hilman, linux-amlogic, devicetree,
linux-kernel, Rob Herring
SM1 SoC family adds two new audio FIFOs with the related arb reset lines
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt | 3 ++-
include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
index 26e542eb96df..43e580ef64ba 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
@@ -4,7 +4,8 @@ The Amlogic Audio ARB is a simple device which enables or
disables the access of Audio FIFOs to DDR on AXG based SoC.
Required properties:
-- compatible: 'amlogic,meson-axg-audio-arb'
+- compatible: 'amlogic,meson-axg-audio-arb' or
+ 'amlogic,meson-sm1-audio-arb'
- reg: physical base address of the controller and length of memory
mapped region.
- clocks: phandle to the fifo peripheral clock provided by the audio
diff --git a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
index 05c36367875c..1ef807856cb8 100644
--- a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
+++ b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
@@ -13,5 +13,7 @@
#define AXG_ARB_FRDDR_A 3
#define AXG_ARB_FRDDR_B 4
#define AXG_ARB_FRDDR_C 5
+#define AXG_ARB_TODDR_D 6
+#define AXG_ARB_FRDDR_D 7
#endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */
--
2.21.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 2/2] reset: meson-audio-arb: add sm1 support
2019-09-05 13:50 ` Jerome Brunet
@ 2019-09-05 13:50 ` Jerome Brunet
-1 siblings, 0 replies; 14+ messages in thread
From: Jerome Brunet @ 2019-09-05 13:50 UTC (permalink / raw)
To: Philipp Zabel
Cc: Kevin Hilman, linux-amlogic, linux-kernel, devicetree,
Jerome Brunet
Add the new arb reset lines of the SM1 SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/reset/reset-meson-audio-arb.c | 43 +++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 3 deletions(-)
diff --git a/drivers/reset/reset-meson-audio-arb.c b/drivers/reset/reset-meson-audio-arb.c
index c53a2185a039..1dc06e08a8da 100644
--- a/drivers/reset/reset-meson-audio-arb.c
+++ b/drivers/reset/reset-meson-audio-arb.c
@@ -19,6 +19,11 @@ struct meson_audio_arb_data {
spinlock_t lock;
};
+struct meson_audio_arb_match_data {
+ const unsigned int *reset_bits;
+ unsigned int reset_num;
+};
+
#define ARB_GENERAL_BIT 31
static const unsigned int axg_audio_arb_reset_bits[] = {
@@ -30,6 +35,27 @@ static const unsigned int axg_audio_arb_reset_bits[] = {
[AXG_ARB_FRDDR_C] = 6,
};
+static const struct meson_audio_arb_match_data axg_audio_arb_match = {
+ .reset_bits = axg_audio_arb_reset_bits,
+ .reset_num = ARRAY_SIZE(axg_audio_arb_reset_bits),
+};
+
+static const unsigned int sm1_audio_arb_reset_bits[] = {
+ [AXG_ARB_TODDR_A] = 0,
+ [AXG_ARB_TODDR_B] = 1,
+ [AXG_ARB_TODDR_C] = 2,
+ [AXG_ARB_FRDDR_A] = 4,
+ [AXG_ARB_FRDDR_B] = 5,
+ [AXG_ARB_FRDDR_C] = 6,
+ [AXG_ARB_TODDR_D] = 3,
+ [AXG_ARB_FRDDR_D] = 7,
+};
+
+static const struct meson_audio_arb_match_data sm1_audio_arb_match = {
+ .reset_bits = sm1_audio_arb_reset_bits,
+ .reset_num = ARRAY_SIZE(sm1_audio_arb_reset_bits),
+};
+
static int meson_audio_arb_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
@@ -82,7 +108,13 @@ static const struct reset_control_ops meson_audio_arb_rstc_ops = {
};
static const struct of_device_id meson_audio_arb_of_match[] = {
- { .compatible = "amlogic,meson-axg-audio-arb", },
+ {
+ .compatible = "amlogic,meson-axg-audio-arb",
+ .data = &axg_audio_arb_match,
+ }, {
+ .compatible = "amlogic,meson-sm1-audio-arb",
+ .data = &sm1_audio_arb_match,
+ },
{}
};
MODULE_DEVICE_TABLE(of, meson_audio_arb_of_match);
@@ -104,10 +136,15 @@ static int meson_audio_arb_remove(struct platform_device *pdev)
static int meson_audio_arb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ const struct meson_audio_arb_match_data *data;
struct meson_audio_arb_data *arb;
struct resource *res;
int ret;
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
+
arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL);
if (!arb)
return -ENOMEM;
@@ -126,8 +163,8 @@ static int meson_audio_arb_probe(struct platform_device *pdev)
return PTR_ERR(arb->regs);
spin_lock_init(&arb->lock);
- arb->reset_bits = axg_audio_arb_reset_bits;
- arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits);
+ arb->reset_bits = data->reset_bits;
+ arb->rstc.nr_resets = data->reset_num;
arb->rstc.ops = &meson_audio_arb_rstc_ops;
arb->rstc.of_node = dev->of_node;
arb->rstc.owner = THIS_MODULE;
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 2/2] reset: meson-audio-arb: add sm1 support
@ 2019-09-05 13:50 ` Jerome Brunet
0 siblings, 0 replies; 14+ messages in thread
From: Jerome Brunet @ 2019-09-05 13:50 UTC (permalink / raw)
To: Philipp Zabel
Cc: Jerome Brunet, Kevin Hilman, linux-amlogic, devicetree,
linux-kernel
Add the new arb reset lines of the SM1 SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/reset/reset-meson-audio-arb.c | 43 +++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 3 deletions(-)
diff --git a/drivers/reset/reset-meson-audio-arb.c b/drivers/reset/reset-meson-audio-arb.c
index c53a2185a039..1dc06e08a8da 100644
--- a/drivers/reset/reset-meson-audio-arb.c
+++ b/drivers/reset/reset-meson-audio-arb.c
@@ -19,6 +19,11 @@ struct meson_audio_arb_data {
spinlock_t lock;
};
+struct meson_audio_arb_match_data {
+ const unsigned int *reset_bits;
+ unsigned int reset_num;
+};
+
#define ARB_GENERAL_BIT 31
static const unsigned int axg_audio_arb_reset_bits[] = {
@@ -30,6 +35,27 @@ static const unsigned int axg_audio_arb_reset_bits[] = {
[AXG_ARB_FRDDR_C] = 6,
};
+static const struct meson_audio_arb_match_data axg_audio_arb_match = {
+ .reset_bits = axg_audio_arb_reset_bits,
+ .reset_num = ARRAY_SIZE(axg_audio_arb_reset_bits),
+};
+
+static const unsigned int sm1_audio_arb_reset_bits[] = {
+ [AXG_ARB_TODDR_A] = 0,
+ [AXG_ARB_TODDR_B] = 1,
+ [AXG_ARB_TODDR_C] = 2,
+ [AXG_ARB_FRDDR_A] = 4,
+ [AXG_ARB_FRDDR_B] = 5,
+ [AXG_ARB_FRDDR_C] = 6,
+ [AXG_ARB_TODDR_D] = 3,
+ [AXG_ARB_FRDDR_D] = 7,
+};
+
+static const struct meson_audio_arb_match_data sm1_audio_arb_match = {
+ .reset_bits = sm1_audio_arb_reset_bits,
+ .reset_num = ARRAY_SIZE(sm1_audio_arb_reset_bits),
+};
+
static int meson_audio_arb_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
@@ -82,7 +108,13 @@ static const struct reset_control_ops meson_audio_arb_rstc_ops = {
};
static const struct of_device_id meson_audio_arb_of_match[] = {
- { .compatible = "amlogic,meson-axg-audio-arb", },
+ {
+ .compatible = "amlogic,meson-axg-audio-arb",
+ .data = &axg_audio_arb_match,
+ }, {
+ .compatible = "amlogic,meson-sm1-audio-arb",
+ .data = &sm1_audio_arb_match,
+ },
{}
};
MODULE_DEVICE_TABLE(of, meson_audio_arb_of_match);
@@ -104,10 +136,15 @@ static int meson_audio_arb_remove(struct platform_device *pdev)
static int meson_audio_arb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ const struct meson_audio_arb_match_data *data;
struct meson_audio_arb_data *arb;
struct resource *res;
int ret;
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
+
arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL);
if (!arb)
return -ENOMEM;
@@ -126,8 +163,8 @@ static int meson_audio_arb_probe(struct platform_device *pdev)
return PTR_ERR(arb->regs);
spin_lock_init(&arb->lock);
- arb->reset_bits = axg_audio_arb_reset_bits;
- arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits);
+ arb->reset_bits = data->reset_bits;
+ arb->rstc.nr_resets = data->reset_num;
arb->rstc.ops = &meson_audio_arb_rstc_ops;
arb->rstc.of_node = dev->of_node;
arb->rstc.owner = THIS_MODULE;
--
2.21.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
2019-09-05 13:50 ` Jerome Brunet
@ 2019-09-05 14:26 ` Philipp Zabel
-1 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2019-09-05 14:26 UTC (permalink / raw)
To: Jerome Brunet; +Cc: Kevin Hilman, devicetree, linux-kernel, linux-amlogic
Hi Jerome,
On Thu, 2019-09-05 at 15:50 +0200, Jerome Brunet wrote:
> This patchset adds the new arb reset lines for the sm1 SoC family
> It has been tested on the sei610 platform.
>
> Changes since v1 [0]:
> * Fix the mistake on the number of reset as reported by Phililpp (thx)
>
> [0]: https://lkml.kernel.org/r/20190820094625.13455-1-jbrunet@baylibre.com
>
> Jerome Brunet (2):
> reset: dt-bindings: meson: update arb bindings for sm1
> reset: meson-audio-arb: add sm1 support
>
> .../reset/amlogic,meson-axg-audio-arb.txt | 3 +-
> drivers/reset/reset-meson-audio-arb.c | 43 +++++++++++++++++--
> .../reset/amlogic,meson-axg-audio-arb.h | 2 +
> 3 files changed, 44 insertions(+), 4 deletions(-)
Thank you, both applied to reset/next.
regards
Philipp
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
@ 2019-09-05 14:26 ` Philipp Zabel
0 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2019-09-05 14:26 UTC (permalink / raw)
To: Jerome Brunet; +Cc: Kevin Hilman, linux-amlogic, devicetree, linux-kernel
Hi Jerome,
On Thu, 2019-09-05 at 15:50 +0200, Jerome Brunet wrote:
> This patchset adds the new arb reset lines for the sm1 SoC family
> It has been tested on the sei610 platform.
>
> Changes since v1 [0]:
> * Fix the mistake on the number of reset as reported by Phililpp (thx)
>
> [0]: https://lkml.kernel.org/r/20190820094625.13455-1-jbrunet@baylibre.com
>
> Jerome Brunet (2):
> reset: dt-bindings: meson: update arb bindings for sm1
> reset: meson-audio-arb: add sm1 support
>
> .../reset/amlogic,meson-axg-audio-arb.txt | 3 +-
> drivers/reset/reset-meson-audio-arb.c | 43 +++++++++++++++++--
> .../reset/amlogic,meson-axg-audio-arb.h | 2 +
> 3 files changed, 44 insertions(+), 4 deletions(-)
Thank you, both applied to reset/next.
regards
Philipp
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
2019-09-05 14:26 ` Philipp Zabel
@ 2019-10-01 9:40 ` Jerome Brunet
-1 siblings, 0 replies; 14+ messages in thread
From: Jerome Brunet @ 2019-10-01 9:40 UTC (permalink / raw)
To: Philipp Zabel; +Cc: Kevin Hilman, devicetree, linux-kernel, linux-amlogic
On Thu 05 Sep 2019 at 16:26, Philipp Zabel <p.zabel@pengutronix.de> wrote:
> Hi Jerome,
>
> On Thu, 2019-09-05 at 15:50 +0200, Jerome Brunet wrote:
>> This patchset adds the new arb reset lines for the sm1 SoC family
>> It has been tested on the sei610 platform.
>>
>> Changes since v1 [0]:
>> * Fix the mistake on the number of reset as reported by Phililpp (thx)
>>
>> [0]: https://lkml.kernel.org/r/20190820094625.13455-1-jbrunet@baylibre.com
>>
>> Jerome Brunet (2):
>> reset: dt-bindings: meson: update arb bindings for sm1
>> reset: meson-audio-arb: add sm1 support
>>
>> .../reset/amlogic,meson-axg-audio-arb.txt | 3 +-
>> drivers/reset/reset-meson-audio-arb.c | 43 +++++++++++++++++--
>> .../reset/amlogic,meson-axg-audio-arb.h | 2 +
>> 3 files changed, 44 insertions(+), 4 deletions(-)
>
> Thank you, both applied to reset/next.
Hi Philipp,
Looks like this patchset missed v5.4-rc1.
Could you provide a tag with the bindings to Kevin so we can use the IDs
in DT until the next merge window ?
Thx
Regards
Jerome
>
> regards
> Philipp
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
@ 2019-10-01 9:40 ` Jerome Brunet
0 siblings, 0 replies; 14+ messages in thread
From: Jerome Brunet @ 2019-10-01 9:40 UTC (permalink / raw)
To: Philipp Zabel; +Cc: Kevin Hilman, linux-amlogic, devicetree, linux-kernel
On Thu 05 Sep 2019 at 16:26, Philipp Zabel <p.zabel@pengutronix.de> wrote:
> Hi Jerome,
>
> On Thu, 2019-09-05 at 15:50 +0200, Jerome Brunet wrote:
>> This patchset adds the new arb reset lines for the sm1 SoC family
>> It has been tested on the sei610 platform.
>>
>> Changes since v1 [0]:
>> * Fix the mistake on the number of reset as reported by Phililpp (thx)
>>
>> [0]: https://lkml.kernel.org/r/20190820094625.13455-1-jbrunet@baylibre.com
>>
>> Jerome Brunet (2):
>> reset: dt-bindings: meson: update arb bindings for sm1
>> reset: meson-audio-arb: add sm1 support
>>
>> .../reset/amlogic,meson-axg-audio-arb.txt | 3 +-
>> drivers/reset/reset-meson-audio-arb.c | 43 +++++++++++++++++--
>> .../reset/amlogic,meson-axg-audio-arb.h | 2 +
>> 3 files changed, 44 insertions(+), 4 deletions(-)
>
> Thank you, both applied to reset/next.
Hi Philipp,
Looks like this patchset missed v5.4-rc1.
Could you provide a tag with the bindings to Kevin so we can use the IDs
in DT until the next merge window ?
Thx
Regards
Jerome
>
> regards
> Philipp
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
2019-10-01 9:40 ` Jerome Brunet
@ 2019-10-03 18:03 ` Philipp Zabel
-1 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2019-10-03 18:03 UTC (permalink / raw)
To: Jerome Brunet; +Cc: Kevin Hilman, devicetree, linux-kernel, linux-amlogic
Hi Jerome,
On Tue, Oct 01, 2019 at 11:40:20AM +0200, Jerome Brunet wrote:
[...]
> Looks like this patchset missed v5.4-rc1.
> Could you provide a tag with the bindings to Kevin so we can use the IDs
> in DT until the next merge window ?
Does
git://git.pengutronix.de/git/pza/linux.git reset/meson-sm1-bindings
work for you?
regards
Philipp
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
@ 2019-10-03 18:03 ` Philipp Zabel
0 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2019-10-03 18:03 UTC (permalink / raw)
To: Jerome Brunet; +Cc: Kevin Hilman, linux-amlogic, devicetree, linux-kernel
Hi Jerome,
On Tue, Oct 01, 2019 at 11:40:20AM +0200, Jerome Brunet wrote:
[...]
> Looks like this patchset missed v5.4-rc1.
> Could you provide a tag with the bindings to Kevin so we can use the IDs
> in DT until the next merge window ?
Does
git://git.pengutronix.de/git/pza/linux.git reset/meson-sm1-bindings
work for you?
regards
Philipp
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
2019-10-03 18:03 ` Philipp Zabel
@ 2019-10-04 14:46 ` Kevin Hilman
-1 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2019-10-04 14:46 UTC (permalink / raw)
To: Philipp Zabel, Jerome Brunet; +Cc: linux-amlogic, linux-kernel, devicetree
Philipp Zabel <pza@pengutronix.de> writes:
> Hi Jerome,
>
> On Tue, Oct 01, 2019 at 11:40:20AM +0200, Jerome Brunet wrote:
> [...]
>> Looks like this patchset missed v5.4-rc1.
>> Could you provide a tag with the bindings to Kevin so we can use the IDs
>> in DT until the next merge window ?
>
> Does
>
> git://git.pengutronix.de/git/pza/linux.git reset/meson-sm1-bindings
>
> work for you?
I'd prefer a tag as that's more of an indicator that it will be static,
but if you're sure that's going to be static, and is the same branch/tag
you'll be sending upstream, that will work.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] reset: meson-audio-arb: add sm1 support
@ 2019-10-04 14:46 ` Kevin Hilman
0 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2019-10-04 14:46 UTC (permalink / raw)
To: Philipp Zabel, Jerome Brunet; +Cc: linux-amlogic, devicetree, linux-kernel
Philipp Zabel <pza@pengutronix.de> writes:
> Hi Jerome,
>
> On Tue, Oct 01, 2019 at 11:40:20AM +0200, Jerome Brunet wrote:
> [...]
>> Looks like this patchset missed v5.4-rc1.
>> Could you provide a tag with the bindings to Kevin so we can use the IDs
>> in DT until the next merge window ?
>
> Does
>
> git://git.pengutronix.de/git/pza/linux.git reset/meson-sm1-bindings
>
> work for you?
I'd prefer a tag as that's more of an indicator that it will be static,
but if you're sure that's going to be static, and is the same branch/tag
you'll be sending upstream, that will work.
Kevin
^ permalink raw reply [flat|nested] 14+ messages in thread