[PATCH v2 0/3] ARM64: dts: meson-gxl: Add support for Libre Technology CC board

[PATCH v2 0/3] ARM64: dts: meson-gxl: Add support for Libre Technology CC board

[Jerome Brunet]

This patchset adds support for the CC board from Shenzhen Libre Technology

This board derives from the s905x p212 reference design. it provides:
* Ethernet using the internal PHY
* 4 USB ports
* Composite Audio/Video jack
* HDMI
* IR

It also provides 2 Headers (40 and 8 pins) for GPIOs and the following
functions:
* 2 i2c busses
* SPI
* SDIO
* I2S 8ch output
* PWMs
* UART with HW flow control
* PCM
* 2 ADC Channels

Changes since v1: [0]
 - Fixup confusion between the manufacturer name and the device name.

[0]: https://lkml.kernel.org/r/20170616120648.23320-1-jbrunet at baylibre.com

Jerome Brunet (3):
  dt-bindings: add Libre Technology vendor prefix
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  ARM64: dts: meson-gxl: Add Libre Technology CC support

 Documentation/devicetree/bindings/arm/amlogic.txt  |  1 +
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 arch/arm64/boot/dts/amlogic/Makefile               |  1 +
 .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts   | 92 ++++++++++++++++++++++
 4 files changed, 95 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

-- 
2.9.4

[PATCH v2 0/3] ARM64: dts: meson-gxl: Add support for Libre Technology CC board

[Jerome Brunet]

This patchset adds support for the CC board from Shenzhen Libre Technology

This board derives from the s905x p212 reference design. it provides:
* Ethernet using the internal PHY
* 4 USB ports
* Composite Audio/Video jack
* HDMI
* IR

It also provides 2 Headers (40 and 8 pins) for GPIOs and the following
functions:
* 2 i2c busses
* SPI
* SDIO
* I2S 8ch output
* PWMs
* UART with HW flow control
* PCM
* 2 ADC Channels

Changes since v1: [0]
 - Fixup confusion between the manufacturer name and the device name.

[0]: https://lkml.kernel.org/r/20170616120648.23320-1-jbrunet@baylibre.com

Jerome Brunet (3):
  dt-bindings: add Libre Technology vendor prefix
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  ARM64: dts: meson-gxl: Add Libre Technology CC support

 Documentation/devicetree/bindings/arm/amlogic.txt  |  1 +
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 arch/arm64/boot/dts/amlogic/Makefile               |  1 +
 .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts   | 92 ++++++++++++++++++++++
 4 files changed, 95 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

-- 
2.9.4

[PATCH v2 0/3] ARM64: dts: meson-gxl: Add support for Libre Technology CC board

[Jerome Brunet]

This patchset adds support for the CC board from Shenzhen Libre Technology

This board derives from the s905x p212 reference design. it provides:
* Ethernet using the internal PHY
* 4 USB ports
* Composite Audio/Video jack
* HDMI
* IR

It also provides 2 Headers (40 and 8 pins) for GPIOs and the following
functions:
* 2 i2c busses
* SPI
* SDIO
* I2S 8ch output
* PWMs
* UART with HW flow control
* PCM
* 2 ADC Channels

Changes since v1: [0]
 - Fixup confusion between the manufacturer name and the device name.

[0]: https://lkml.kernel.org/r/20170616120648.23320-1-jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org

Jerome Brunet (3):
  dt-bindings: add Libre Technology vendor prefix
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  ARM64: dts: meson-gxl: Add Libre Technology CC support

 Documentation/devicetree/bindings/arm/amlogic.txt  |  1 +
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 arch/arm64/boot/dts/amlogic/Makefile               |  1 +
 .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts   | 92 ++++++++++++++++++++++
 4 files changed, 95 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

-- 
2.9.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 0/3] ARM64: dts: meson-gxl: Add support for Libre Technology CC board

[Jerome Brunet]

This patchset adds support for the CC board from Shenzhen Libre Technology

This board derives from the s905x p212 reference design. it provides:
* Ethernet using the internal PHY
* 4 USB ports
* Composite Audio/Video jack
* HDMI
* IR

It also provides 2 Headers (40 and 8 pins) for GPIOs and the following
functions:
* 2 i2c busses
* SPI
* SDIO
* I2S 8ch output
* PWMs
* UART with HW flow control
* PCM
* 2 ADC Channels

Changes since v1: [0]
 - Fixup confusion between the manufacturer name and the device name.

[0]: https://lkml.kernel.org/r/20170616120648.23320-1-jbrunet at baylibre.com

Jerome Brunet (3):
  dt-bindings: add Libre Technology vendor prefix
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  ARM64: dts: meson-gxl: Add Libre Technology CC support

 Documentation/devicetree/bindings/arm/amlogic.txt  |  1 +
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 arch/arm64/boot/dts/amlogic/Makefile               |  1 +
 .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts   | 92 ++++++++++++++++++++++
 4 files changed, 95 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

-- 
2.9.4

[PATCH v2 1/3] dt-bindings: add Libre Technology vendor prefix

[Jerome Brunet]

Shenzhen Libre Technology Co., Ltd is a single board computer
manufacturer

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ee2e10f2ae41..bf83fd25a1df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -173,6 +173,7 @@ lantiq	Lantiq Semiconductor
 lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
+libretech	Shenzhen Libre Technology Co., Ltd
 licheepi	Lichee Pi
 linaro	Linaro Limited
 linux	Linux-specific binding
-- 
2.9.4

[PATCH v2 1/3] dt-bindings: add Libre Technology vendor prefix

[Jerome Brunet]

Shenzhen Libre Technology Co., Ltd is a single board computer
manufacturer

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ee2e10f2ae41..bf83fd25a1df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -173,6 +173,7 @@ lantiq	Lantiq Semiconductor
 lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
+libretech	Shenzhen Libre Technology Co., Ltd
 licheepi	Lichee Pi
 linaro	Linaro Limited
 linux	Linux-specific binding
-- 
2.9.4

[PATCH v2 1/3] dt-bindings: add Libre Technology vendor prefix

[Jerome Brunet]

Shenzhen Libre Technology Co., Ltd is a single board computer
manufacturer

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ee2e10f2ae41..bf83fd25a1df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -173,6 +173,7 @@ lantiq	Lantiq Semiconductor
 lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
+libretech	Shenzhen Libre Technology Co., Ltd
 licheepi	Lichee Pi
 linaro	Linaro Limited
 linux	Linux-specific binding
-- 
2.9.4

[PATCH v2 1/3] dt-bindings: add Libre Technology vendor prefix

[Rob Herring]

On Mon, Jun 19, 2017 at 11:04:38AM +0200, Jerome Brunet wrote:
> Shenzhen Libre Technology Co., Ltd is a single board computer
> manufacturer
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 1/3] dt-bindings: add Libre Technology vendor prefix

[Rob Herring]

On Mon, Jun 19, 2017 at 11:04:38AM +0200, Jerome Brunet wrote:
> Shenzhen Libre Technology Co., Ltd is a single board computer
> manufacturer
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v2 1/3] dt-bindings: add Libre Technology vendor prefix

[Rob Herring]

On Mon, Jun 19, 2017 at 11:04:38AM +0200, Jerome Brunet wrote:
> Shenzhen Libre Technology Co., Ltd is a single board computer
> manufacturer
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v2 2/3] dt-bindings: arm: amlogic: Add Libre Technology CC board

[Jerome Brunet]

Add bindings documentation for the CC board from Shenzhen Libre
Technology

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 5c01e65951fa..0fff40a6330d 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -52,6 +52,7 @@ Board compatible values (alphabetically, grouped by SoC):
   - "amlogic,p212" (Meson gxl s905x)
   - "hwacom,amazetv" (Meson gxl s905x)
   - "khadas,vim" (Meson gxl s905x)
+  - "libretech,cc" (Meson gxl s905x)
 
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
-- 
2.9.4

[PATCH v2 2/3] dt-bindings: arm: amlogic: Add Libre Technology CC board

[Jerome Brunet]

Add bindings documentation for the CC board from Shenzhen Libre
Technology

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 5c01e65951fa..0fff40a6330d 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -52,6 +52,7 @@ Board compatible values (alphabetically, grouped by SoC):
   - "amlogic,p212" (Meson gxl s905x)
   - "hwacom,amazetv" (Meson gxl s905x)
   - "khadas,vim" (Meson gxl s905x)
+  - "libretech,cc" (Meson gxl s905x)
 
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
-- 
2.9.4

[PATCH v2 2/3] dt-bindings: arm: amlogic: Add Libre Technology CC board

[Jerome Brunet]

Add bindings documentation for the CC board from Shenzhen Libre
Technology

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 5c01e65951fa..0fff40a6330d 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -52,6 +52,7 @@ Board compatible values (alphabetically, grouped by SoC):
   - "amlogic,p212" (Meson gxl s905x)
   - "hwacom,amazetv" (Meson gxl s905x)
   - "khadas,vim" (Meson gxl s905x)
+  - "libretech,cc" (Meson gxl s905x)
 
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
-- 
2.9.4

[PATCH v2 3/3] ARM64: dts: meson-gxl: Add Libre Technology CC support

[Jerome Brunet]

Add support for the CC  board from Shenzhen Libre Technology
More information about the board are available here:

https://libre.computer/blog/

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |  1 +
 .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts   | 92 ++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8a0e09250978..7a9f48c27b1f 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
new file mode 100644
index 000000000000..890821d6e52b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Libre Technology CC";
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "librecomputer:system-status";
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		blue {
+			label = "librecomputer:blue";
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/*
+ * The following devices exists but are exposed on the general
+ * purpose GPIO header. End user may well decide to use those pins
+ * for another purpose
+ */
+
+&sd_emmc_a {
+	status = "disabled";
+};
+
+&uart_A {
+	status = "disabled";
+};
+
+&wifi32k {
+	status = "disabled";
+};
-- 
2.9.4

[PATCH v2 3/3] ARM64: dts: meson-gxl: Add Libre Technology CC support

[Jerome Brunet]

Add support for the CC  board from Shenzhen Libre Technology
More information about the board are available here:

https://libre.computer/blog/

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |  1 +
 .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts   | 92 ++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8a0e09250978..7a9f48c27b1f 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
new file mode 100644
index 000000000000..890821d6e52b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Libre Technology CC";
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "librecomputer:system-status";
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		blue {
+			label = "librecomputer:blue";
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/*
+ * The following devices exists but are exposed on the general
+ * purpose GPIO header. End user may well decide to use those pins
+ * for another purpose
+ */
+
+&sd_emmc_a {
+	status = "disabled";
+};
+
+&uart_A {
+	status = "disabled";
+};
+
+&wifi32k {
+	status = "disabled";
+};
-- 
2.9.4

[PATCH v2 3/3] ARM64: dts: meson-gxl: Add Libre Technology CC support

[Jerome Brunet]

Add support for the CC  board from Shenzhen Libre Technology
More information about the board are available here:

https://libre.computer/blog/

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |  1 +
 .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts   | 92 ++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8a0e09250978..7a9f48c27b1f 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
new file mode 100644
index 000000000000..890821d6e52b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Libre Technology CC";
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "librecomputer:system-status";
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		blue {
+			label = "librecomputer:blue";
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/*
+ * The following devices exists but are exposed on the general
+ * purpose GPIO header. End user may well decide to use those pins
+ * for another purpose
+ */
+
+&sd_emmc_a {
+	status = "disabled";
+};
+
+&uart_A {
+	status = "disabled";
+};
+
+&wifi32k {
+	status = "disabled";
+};
-- 
2.9.4

[PATCH v2 0/3] ARM64: dts: meson-gxl: Add support for Libre Technology CC board

[Kevin Hilman]

Jerome Brunet <jbrunet@baylibre.com> writes:

> This patchset adds support for the CC board from Shenzhen Libre Technology

Applied to v4.13/dt64,

Kevin

Re: [PATCH v2 0/3] ARM64: dts: meson-gxl: Add support for Libre Technology CC board

[Kevin Hilman]

Jerome Brunet <jbrunet@baylibre.com> writes:

> This patchset adds support for the CC board from Shenzhen Libre Technology

Applied to v4.13/dt64,

Kevin

[PATCH v2 0/3] ARM64: dts: meson-gxl: Add support for Libre Technology CC board

[Kevin Hilman]

Jerome Brunet <jbrunet@baylibre.com> writes:

> This patchset adds support for the CC board from Shenzhen Libre Technology

Applied to v4.13/dt64,

Kevin