[PATCH 0/3] ARM64: dts: meson-axg: first round of daughter card updates

[PATCH 0/3] ARM64: dts: meson-axg: first round of daughter card updates

[Jerome Brunet]

This patchset adds a speaker amplifier and some leds present on daughter
cards which are connected to the s400 board.

Kevin, please note that the bindings documentation update for the tas5707
has been queued for next in Mark Brown's ASoC tree. Not having it won't
break anything but you may get checkpatch warning.

Jerome Brunet (3):
  ARM64: dts: meson-axg: add s400 microphone card leds
  ARM64: dts: meson-axg: add s400 main 12v supply
  ARM64: dts: meson-axg: add s400 speaker amplifier

 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 62 ++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

-- 
2.14.4

[PATCH 0/3] ARM64: dts: meson-axg: first round of daughter card updates

[Jerome Brunet]

This patchset adds a speaker amplifier and some leds present on daughter
cards which are connected to the s400 board.

Kevin, please note that the bindings documentation update for the tas5707
has been queued for next in Mark Brown's ASoC tree. Not having it won't
break anything but you may get checkpatch warning.

Jerome Brunet (3):
  ARM64: dts: meson-axg: add s400 microphone card leds
  ARM64: dts: meson-axg: add s400 main 12v supply
  ARM64: dts: meson-axg: add s400 speaker amplifier

 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 62 ++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

-- 
2.14.4

[PATCH 0/3] ARM64: dts: meson-axg: first round of daughter card updates

[Jerome Brunet]

This patchset adds a speaker amplifier and some leds present on daughter
cards which are connected to the s400 board.

Kevin, please note that the bindings documentation update for the tas5707
has been queued for next in Mark Brown's ASoC tree. Not having it won't
break anything but you may get checkpatch warning.

Jerome Brunet (3):
  ARM64: dts: meson-axg: add s400 microphone card leds
  ARM64: dts: meson-axg: add s400 main 12v supply
  ARM64: dts: meson-axg: add s400 speaker amplifier

 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 62 ++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

-- 
2.14.4

[PATCH 1/3] ARM64: dts: meson-axg: add s400 microphone card leds

[Jerome Brunet]

The microphone card connected to the s400 has 6 leds controlled
through an additional i2c gpio controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 42 ++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index dff9b15eb3c0..d926f8956db8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -62,6 +62,40 @@
 		clock-frequency = <32768>;
 		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
 	};
+
+	speaker-leds {
+		compatible = "gpio-leds";
+
+		aled1 {
+			label = "speaker:aled1";
+			gpios = <&gpio_speaker 7 0>;
+		};
+
+		aled2 {
+			label = "speaker:aled2";
+			gpios = <&gpio_speaker 6 0>;
+		};
+
+		aled3 {
+			label = "speaker:aled3";
+			gpios = <&gpio_speaker 5 0>;
+		};
+
+		aled4 {
+			label = "speaker:aled4";
+			gpios = <&gpio_speaker 4 0>;
+		};
+
+		aled5 {
+			label = "speaker:aled5";
+			gpios = <&gpio_speaker 3 0>;
+		};
+
+		aled6 {
+			label = "speaker:aled6";
+			gpios = <&gpio_speaker 2 0>;
+		};
+	};
 };
 
 &ethmac {
@@ -112,6 +146,14 @@
 	status = "okay";
 	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
 	pinctrl-names = "default";
+
+	gpio_speaker: gpio-controller at 1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vddao_3v3>;
+	};
 };
 
 &pwm_ab {
-- 
2.14.4

[PATCH 1/3] ARM64: dts: meson-axg: add s400 microphone card leds

[Jerome Brunet]

The microphone card connected to the s400 has 6 leds controlled
through an additional i2c gpio controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 42 ++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index dff9b15eb3c0..d926f8956db8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -62,6 +62,40 @@
 		clock-frequency = <32768>;
 		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
 	};
+
+	speaker-leds {
+		compatible = "gpio-leds";
+
+		aled1 {
+			label = "speaker:aled1";
+			gpios = <&gpio_speaker 7 0>;
+		};
+
+		aled2 {
+			label = "speaker:aled2";
+			gpios = <&gpio_speaker 6 0>;
+		};
+
+		aled3 {
+			label = "speaker:aled3";
+			gpios = <&gpio_speaker 5 0>;
+		};
+
+		aled4 {
+			label = "speaker:aled4";
+			gpios = <&gpio_speaker 4 0>;
+		};
+
+		aled5 {
+			label = "speaker:aled5";
+			gpios = <&gpio_speaker 3 0>;
+		};
+
+		aled6 {
+			label = "speaker:aled6";
+			gpios = <&gpio_speaker 2 0>;
+		};
+	};
 };
 
 &ethmac {
@@ -112,6 +146,14 @@
 	status = "okay";
 	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
 	pinctrl-names = "default";
+
+	gpio_speaker: gpio-controller@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vddao_3v3>;
+	};
 };
 
 &pwm_ab {
-- 
2.14.4

[PATCH 1/3] ARM64: dts: meson-axg: add s400 microphone card leds

[Jerome Brunet]

The microphone card connected to the s400 has 6 leds controlled
through an additional i2c gpio controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 42 ++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index dff9b15eb3c0..d926f8956db8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -62,6 +62,40 @@
 		clock-frequency = <32768>;
 		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
 	};
+
+	speaker-leds {
+		compatible = "gpio-leds";
+
+		aled1 {
+			label = "speaker:aled1";
+			gpios = <&gpio_speaker 7 0>;
+		};
+
+		aled2 {
+			label = "speaker:aled2";
+			gpios = <&gpio_speaker 6 0>;
+		};
+
+		aled3 {
+			label = "speaker:aled3";
+			gpios = <&gpio_speaker 5 0>;
+		};
+
+		aled4 {
+			label = "speaker:aled4";
+			gpios = <&gpio_speaker 4 0>;
+		};
+
+		aled5 {
+			label = "speaker:aled5";
+			gpios = <&gpio_speaker 3 0>;
+		};
+
+		aled6 {
+			label = "speaker:aled6";
+			gpios = <&gpio_speaker 2 0>;
+		};
+	};
 };
 
 &ethmac {
@@ -112,6 +146,14 @@
 	status = "okay";
 	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
 	pinctrl-names = "default";
+
+	gpio_speaker: gpio-controller at 1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vddao_3v3>;
+	};
 };
 
 &pwm_ab {
-- 
2.14.4

[PATCH 2/3] ARM64: dts: meson-axg: add s400 main 12v supply

[Jerome Brunet]

Add a fixed regulator for the main 12v which is the main power supply
of the board.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index d926f8956db8..0b655570b7c2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -16,6 +16,13 @@
 		serial1 = &uart_A;
 	};
 
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
-- 
2.14.4

[PATCH 2/3] ARM64: dts: meson-axg: add s400 main 12v supply

[Jerome Brunet]

Add a fixed regulator for the main 12v which is the main power supply
of the board.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index d926f8956db8..0b655570b7c2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -16,6 +16,13 @@
 		serial1 = &uart_A;
 	};
 
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
-- 
2.14.4

[PATCH 2/3] ARM64: dts: meson-axg: add s400 main 12v supply

[Jerome Brunet]

Add a fixed regulator for the main 12v which is the main power supply
of the board.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index d926f8956db8..0b655570b7c2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -16,6 +16,13 @@
 		serial1 = &uart_A;
 	};
 
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
-- 
2.14.4

[PATCH 3/3] ARM64: dts: meson-axg: add s400 speaker amplifier

[Jerome Brunet]

Add the first of the two tas5707 power amplifier present on the
speaker daughter board.

According to the schematics of the S400 v3, only I2SB_DIN3 and
I2SC_DOUT2 will be available to the speaker board.

9R83, 9R84 and 9R18 are not connected so no audio signal will be
provided to the second amplifier. There is no point in enabling it
even if it is visible on the i2c bus.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 0b655570b7c2..1927282e8530 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -147,6 +147,19 @@
 	status = "okay";
 	pinctrl-0 = <&i2c1_z_pins>;
 	pinctrl-names = "default";
+
+	speaker_amp1: audio-codec at 1b {
+		compatible = "ti,tas5707";
+		reg = <0x1b>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&vcc_3v3>;
+		DVDD-supply = <&vcc_3v3>;
+		PVDD_A-supply = <&main_12v>;
+		PVDD_B-supply = <&main_12v>;
+		PVDD_C-supply = <&main_12v>;
+		PVDD_D-supply = <&main_12v>;
+	};
 };
 
 &i2c_AO {
-- 
2.14.4

[PATCH 3/3] ARM64: dts: meson-axg: add s400 speaker amplifier

[Jerome Brunet]

Add the first of the two tas5707 power amplifier present on the
speaker daughter board.

According to the schematics of the S400 v3, only I2SB_DIN3 and
I2SC_DOUT2 will be available to the speaker board.

9R83, 9R84 and 9R18 are not connected so no audio signal will be
provided to the second amplifier. There is no point in enabling it
even if it is visible on the i2c bus.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 0b655570b7c2..1927282e8530 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -147,6 +147,19 @@
 	status = "okay";
 	pinctrl-0 = <&i2c1_z_pins>;
 	pinctrl-names = "default";
+
+	speaker_amp1: audio-codec@1b {
+		compatible = "ti,tas5707";
+		reg = <0x1b>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&vcc_3v3>;
+		DVDD-supply = <&vcc_3v3>;
+		PVDD_A-supply = <&main_12v>;
+		PVDD_B-supply = <&main_12v>;
+		PVDD_C-supply = <&main_12v>;
+		PVDD_D-supply = <&main_12v>;
+	};
 };
 
 &i2c_AO {
-- 
2.14.4

[PATCH 3/3] ARM64: dts: meson-axg: add s400 speaker amplifier

[Jerome Brunet]

Add the first of the two tas5707 power amplifier present on the
speaker daughter board.

According to the schematics of the S400 v3, only I2SB_DIN3 and
I2SC_DOUT2 will be available to the speaker board.

9R83, 9R84 and 9R18 are not connected so no audio signal will be
provided to the second amplifier. There is no point in enabling it
even if it is visible on the i2c bus.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 0b655570b7c2..1927282e8530 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -147,6 +147,19 @@
 	status = "okay";
 	pinctrl-0 = <&i2c1_z_pins>;
 	pinctrl-names = "default";
+
+	speaker_amp1: audio-codec at 1b {
+		compatible = "ti,tas5707";
+		reg = <0x1b>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&vcc_3v3>;
+		DVDD-supply = <&vcc_3v3>;
+		PVDD_A-supply = <&main_12v>;
+		PVDD_B-supply = <&main_12v>;
+		PVDD_C-supply = <&main_12v>;
+		PVDD_D-supply = <&main_12v>;
+	};
 };
 
 &i2c_AO {
-- 
2.14.4

[PATCH 0/3] ARM64: dts: meson-axg: first round of daughter card updates

[Kevin Hilman]

Jerome Brunet <jbrunet@baylibre.com> writes:

> This patchset adds a speaker amplifier and some leds present on daughter
> cards which are connected to the s400 board.
>
> Kevin, please note that the bindings documentation update for the tas5707
> has been queued for next in Mark Brown's ASoC tree. Not having it won't
> break anything but you may get checkpatch warning.

Thanks for the warning.

Series applied to v4.19/dt64,

Kevin

Re: [PATCH 0/3] ARM64: dts: meson-axg: first round of daughter card updates

[Kevin Hilman]

Jerome Brunet <jbrunet@baylibre.com> writes:

> This patchset adds a speaker amplifier and some leds present on daughter
> cards which are connected to the s400 board.
>
> Kevin, please note that the bindings documentation update for the tas5707
> has been queued for next in Mark Brown's ASoC tree. Not having it won't
> break anything but you may get checkpatch warning.

Thanks for the warning.

Series applied to v4.19/dt64,

Kevin

[PATCH 0/3] ARM64: dts: meson-axg: first round of daughter card updates

[Kevin Hilman]

Jerome Brunet <jbrunet@baylibre.com> writes:

> This patchset adds a speaker amplifier and some leds present on daughter
> cards which are connected to the s400 board.
>
> Kevin, please note that the bindings documentation update for the tas5707
> has been queued for next in Mark Brown's ASoC tree. Not having it won't
> break anything but you may get checkpatch warning.

Thanks for the warning.

Series applied to v4.19/dt64,

Kevin