* [PATCH v2 0/4] arm64: dts: meson-g12a: bluetooth fixups
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman; +Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Neil Armstrong
These patches :
- adds the 32khz low power clock to the bluetooth node, since this
clock is needed for the bluetooth part of the module to initialize
- bumps the bus speed to 2Mbaud/s
Changes since v1:
- removed the invalid Fixes tags
- added the reviewed/acked by tags
Neil Armstrong (4):
arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 3 +++
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 3 +++
2 files changed, 6 insertions(+)
--
2.21.0
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 0/4] arm64: dts: meson-g12a: bluetooth fixups
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman; +Cc: linux-amlogic, linux-kernel, linux-arm-kernel, Neil Armstrong
These patches :
- adds the 32khz low power clock to the bluetooth node, since this
clock is needed for the bluetooth part of the module to initialize
- bumps the bus speed to 2Mbaud/s
Changes since v1:
- removed the invalid Fixes tags
- added the reviewed/acked by tags
Neil Armstrong (4):
arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 3 +++
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 3 +++
2 files changed, 6 insertions(+)
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 1/4] arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
2019-06-07 14:36 ` Neil Armstrong
(?)
@ 2019-06-07 14:36 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
The 32k low power clock is necessary for the bluetooth part of the
combo module to initialize correctly, simply add the same clock we
use for the sdio pwrseq.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index eac57d997e0b..3e0e119c13ce 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -530,6 +530,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
vbat-supply = <&vddao_3v3>;
vddio-supply = <&vddio_ao1v8>;
};
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 1/4] arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Neil Armstrong,
Martin Blumenstingl
The 32k low power clock is necessary for the bluetooth part of the
combo module to initialize correctly, simply add the same clock we
use for the sdio pwrseq.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index eac57d997e0b..3e0e119c13ce 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -530,6 +530,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
vbat-supply = <&vddao_3v3>;
vddio-supply = <&vddio_ao1v8>;
};
--
2.21.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 1/4] arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
The 32k low power clock is necessary for the bluetooth part of the
combo module to initialize correctly, simply add the same clock we
use for the sdio pwrseq.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index eac57d997e0b..3e0e119c13ce 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -530,6 +530,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
vbat-supply = <&vddao_3v3>;
vddio-supply = <&vddio_ao1v8>;
};
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 2/4] arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
2019-06-07 14:36 ` Neil Armstrong
(?)
@ 2019-06-07 14:36 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
The 32k low power clock is necessary for the bluetooth part of the
combo module to initialize correctly, simply add the same clock we
use for the sdio pwrseq.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 2c10ebfd9e7c..aa9da5de5c2d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -206,6 +206,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
};
};
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 2/4] arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Neil Armstrong,
Martin Blumenstingl
The 32k low power clock is necessary for the bluetooth part of the
combo module to initialize correctly, simply add the same clock we
use for the sdio pwrseq.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 2c10ebfd9e7c..aa9da5de5c2d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -206,6 +206,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
};
};
--
2.21.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 2/4] arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
The 32k low power clock is necessary for the bluetooth part of the
combo module to initialize correctly, simply add the same clock we
use for the sdio pwrseq.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 2c10ebfd9e7c..aa9da5de5c2d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -206,6 +206,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
};
};
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 3/4] arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
2019-06-07 14:36 ` Neil Armstrong
(?)
@ 2019-06-07 14:36 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
Setting to 2Mbaud/s is the nominal bus speed for common usages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 3e0e119c13ce..4fc30131e5e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -530,6 +530,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
vbat-supply = <&vddao_3v3>;
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 3/4] arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Neil Armstrong,
Martin Blumenstingl
Setting to 2Mbaud/s is the nominal bus speed for common usages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 3e0e119c13ce..4fc30131e5e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -530,6 +530,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
vbat-supply = <&vddao_3v3>;
--
2.21.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 3/4] arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
Setting to 2Mbaud/s is the nominal bus speed for common usages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 3e0e119c13ce..4fc30131e5e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -530,6 +530,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
vbat-supply = <&vddao_3v3>;
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 4/4] arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
2019-06-07 14:36 ` Neil Armstrong
(?)
@ 2019-06-07 14:36 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
Setting to 2Mbaud/s is the nominal bus speed for common usages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index aa9da5de5c2d..300c29dad49f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -206,6 +206,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 4/4] arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Neil Armstrong,
Martin Blumenstingl
Setting to 2Mbaud/s is the nominal bus speed for common usages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index aa9da5de5c2d..300c29dad49f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -206,6 +206,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
--
2.21.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 4/4] arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
@ 2019-06-07 14:36 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2019-06-07 14:36 UTC (permalink / raw)
To: khilman
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
Setting to 2Mbaud/s is the nominal bus speed for common usages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index aa9da5de5c2d..300c29dad49f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -206,6 +206,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v2 4/4] arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
2019-06-07 14:36 ` Neil Armstrong
(?)
@ 2019-06-07 22:30 ` Kevin Hilman
-1 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2019-06-07 22:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
Neil Armstrong <narmstrong@baylibre.com> writes:
> Setting to 2Mbaud/s is the nominal bus speed for common usages.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Queued for v5.3,
Thanks,
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 4/4] arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
@ 2019-06-07 22:30 ` Kevin Hilman
0 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2019-06-07 22:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Neil Armstrong,
Martin Blumenstingl
Neil Armstrong <narmstrong@baylibre.com> writes:
> Setting to 2Mbaud/s is the nominal bus speed for common usages.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Queued for v5.3,
Thanks,
Kevin
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 4/4] arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
@ 2019-06-07 22:30 ` Kevin Hilman
0 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2019-06-07 22:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: Martin Blumenstingl, linux-amlogic, linux-kernel,
linux-arm-kernel, Neil Armstrong
Neil Armstrong <narmstrong@baylibre.com> writes:
> Setting to 2Mbaud/s is the nominal bus speed for common usages.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Queued for v5.3,
Thanks,
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/4] arm64: dts: meson-g12a: bluetooth fixups
2019-06-07 14:36 ` Neil Armstrong
(?)
@ 2019-06-07 22:30 ` Kevin Hilman
-1 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2019-06-07 22:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-amlogic, linux-kernel, linux-arm-kernel, Neil Armstrong
Neil Armstrong <narmstrong@baylibre.com> writes:
> These patches :
> - adds the 32khz low power clock to the bluetooth node, since this
> clock is needed for the bluetooth part of the module to initialize
> - bumps the bus speed to 2Mbaud/s
Queued for v5.3,
Thanks,
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/4] arm64: dts: meson-g12a: bluetooth fixups
@ 2019-06-07 22:30 ` Kevin Hilman
0 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2019-06-07 22:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Neil Armstrong
Neil Armstrong <narmstrong@baylibre.com> writes:
> These patches :
> - adds the 32khz low power clock to the bluetooth node, since this
> clock is needed for the bluetooth part of the module to initialize
> - bumps the bus speed to 2Mbaud/s
Queued for v5.3,
Thanks,
Kevin
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/4] arm64: dts: meson-g12a: bluetooth fixups
@ 2019-06-07 22:30 ` Kevin Hilman
0 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2019-06-07 22:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-amlogic, linux-kernel, linux-arm-kernel, Neil Armstrong
Neil Armstrong <narmstrong@baylibre.com> writes:
> These patches :
> - adds the 32khz low power clock to the bluetooth node, since this
> clock is needed for the bluetooth part of the module to initialize
> - bumps the bus speed to 2Mbaud/s
Queued for v5.3,
Thanks,
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread