From: Kevin Hilman <khilman@baylibre.com>
To: Marc Zyngier <maz@kernel.org>
Cc: linux-amlogic@lists.infradead.org, jbrunet@baylibre.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH 0/2] irq-meson-gpio: make it possible to build as a module
Date: Mon, 26 Oct 2020 10:33:09 -0700 [thread overview]
Message-ID: <7hv9ewhoyy.fsf@baylibre.com> (raw)
In-Reply-To: <7hy2jshp6w.fsf@baylibre.com>
Kevin Hilman <khilman@baylibre.com> writes:
> Marc Zyngier <maz@kernel.org> writes:
>
>> On 2020-10-26 16:18, Kevin Hilman wrote:
>>> Marc Zyngier <maz@kernel.org> writes:
>>>
>>>> On Tue, 20 Oct 2020 08:25:30 +0100,
>>>> Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>>
>>>>> In order to reduce the kernel Image size on multi-platform
>>>>> distributions,
>>>>> make it possible to build the Amlogic GPIO IRQ controller as a module
>>>>> by switching it to a platform driver.
>>>>>
>>>>> The second patch removes MESON_IRQ_GPIO selection from ARCH_MESON to
>>>>> allow
>>>>> building the driver as module.
>>>>>
>>>>> Neil Armstrong (2):
>>>>> irqchip: irq-meson-gpio: make it possible to build as a module
>>>>> arm64: meson: remove MESON_IRQ_GPIO selection
>>>>>
>>>>> arch/arm64/Kconfig.platforms | 1 -
>>>>> drivers/irqchip/Kconfig | 5 +-
>>>>> drivers/irqchip/irq-meson-gpio.c | 89
>>>>> ++++++++++++++++++++------------
>>>>> 3 files changed, 59 insertions(+), 36 deletions(-)
>>>>
>>>> I've tried this series on my vim3l with the this driver compiled as a
>>>> module, and lost the Ethernet interface in the process, as the phy
>>>> wasn't able to resolve its interrupt and things fail later on:
>>>>
>>>> [ 72.238291] meson8b-dwmac ff3f0000.ethernet eth1: no phy at addr -1
>>>> [ 72.238917] meson8b-dwmac ff3f0000.ethernet eth1: stmmac_open:
>>>> Cannot attach to PHY (error: -19)
>>>>
>>>> This is a generic problem with making DT-based interrupt controllers
>>>> modular when not *all* the drivers can deal with probing deferral.
>>>
>>> Yes, but this series still keeps the default as built-in.
>>>
>>> If you build as a module, and you add `fw_devlink=on` to the kernel
>>> command-line, device-links will be created based on DT dependencies
>>> which will ensure the right module load order.
>>
>> It doesn't work here. I get the exact same error (well, with eth0
>> instead
>> of eth1). In my experience, fw_devlink isn't reliable yet. Config on
>> request.
>
> Other than CONFIG_MESON_IRQ_GPIO=m, are you using default upstream
> defconfig?
>
> I just double-checked with this series on top of v5.10-rc1, and I have
> eth0 working with interrupts without needing fw_devlink=on.
>
> With the default upstream defconfig all the networking for these devices
> is already configured as modules.
Forgot to include a full boot log:
U-Boot 2020.07-00031-gb35ed474d2b4 (Sep 14 2020 - 11:11:52 -0700) khadas-vim3l
Model: Khadas VIM3L
SoC: Amlogic Meson SM1 (Unknown) Revision 2b:c (4:2)
DRAM: 2 GiB
MMC: sd@ffe03000: 0, sd@ffe05000: 1, mmc@ffe07000: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@3000
Out: serial@3000
Err: serial@3000
Net: eth0: ethernet@ff3f0000
Verify GPT: success!
switch to partitions #0, OK
mmc2(part 0) is current device
MMC read: dev # 2, block # 1024, count 4096 ... 4096 blocks read: OK
Hit any key to stop autoboot: 2
# PYBOOT: u-boot: taking control.
0
=>
=> version
version
U-Boot 2020.07-00031-gb35ed474d2b4 (Sep 14 2020 - 11:11:52 -0700) khadas-vim3l
aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0
GNU ld (GNU Binutils for Debian) 2.31.1
=> setenv preboot
setenv preboot
=> setenv bootargs console=ttyAML0,115200
setenv bootargs console=ttyAML0,115200
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no
setenv autoload no
=> setenv autoboot no
setenv autoboot no
=> dhcp
dhcp
ethernet@ff3f0000 Waiting for PHY auto negotiation to complete.... done
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.0.143 (2 ms)
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x03000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz
tftp 0x03000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz'.
Load address: 0x3000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#####################################################T ############
#################################################################
#################################################################
#################################################################
#################################################################
###############################
736.3 KiB/s
done
Bytes transferred = 10945439 (a7039f hex)
=> tftp 0x08000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz
tftp 0x08000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz'.
Load address: 0x8000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################
1.3 MiB/s
done
Bytes transferred = 15588406 (eddc36 hex)
=> tftp 0x01000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb
tftp 0x01000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb'.
Load address: 0x1000000
Loading: *####
937.5 KiB/s
done
Bytes transferred = 48988 (bf5c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttyAML0,115200
=> unzip 0x03000000 0x01080000
booti 0x01080000 - 0x01000000
# PYBOOT: u-boot: jumping to kernel image
unzip 0x03000000 0x01080000
Uncompressed size: 31179264 = 0x1DBC200
=> booti 0x01080000 - 0x01000000
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
Loading Device Tree to 0000000075f12000, end 0000000075f20f5b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[ 0.000000] Linux version 5.10.0-rc1-00002-g4b28e5bd6b6a (KernelCI@paris) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #232 SMP PREEMPT Mon Oct 26 10:18:47 PDT 2020
[ 0.000000] Machine model: Khadas VIM3L
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000065c00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007f806fff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7f3bd100-0x7f3befff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007f806fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x000000007f806fff]
[ 0.000000] Zeroed struct page in unavailable ranges: 505 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007f806fff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 23 pages/cpu s56152 r8192 d29864 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 513318
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: console=ttyAML0,115200
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB)
[ 0.000000] Memory: 1670932K/2085916K available (14076K kernel code, 2800K rwdata, 7572K rodata, 5952K init, 515K bss, 152840K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4d4 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000250] Console: colour dummy device 80x25
[ 0.000332] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000346] pid_max: default: 32768 minimum: 301
[ 0.000420] LSM: Security Framework initializing
[ 0.000477] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000492] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001786] rcu: Hierarchical SRCU implementation.
[ 0.005342] EFI services will not be available.
[ 0.005582] smp: Bringing up secondary CPUs ...
[ 0.006335] Detected VIPT I-cache on CPU1
[ 0.006396] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[ 0.007183] Detected VIPT I-cache on CPU2
[ 0.007225] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[ 0.007992] Detected VIPT I-cache on CPU3
[ 0.008031] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[ 0.008103] smp: Brought up 1 node, 4 CPUs
[ 0.008125] SMP: Total of 4 processors activated.
[ 0.008132] CPU features: detected: Privileged Access Never
[ 0.008137] CPU features: detected: LSE atomic instructions
[ 0.008142] CPU features: detected: User Access Override
[ 0.008147] CPU features: detected: 32-bit EL0 Support
[ 0.008153] CPU features: detected: Common not Private translations
[ 0.008158] CPU features: detected: RAS Extension Support
[ 0.008163] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.008168] CPU features: detected: CRC32 instructions
[ 0.008175] CPU features: detected: 32-bit EL1 Support
[ 0.023411] CPU: All CPU(s) started at EL2
[ 0.025215] devtmpfs: initialized
[ 0.033707] KASLR disabled due to lack of seed
[ 0.034072] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.034090] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.039946] pinctrl core: initialized pinctrl subsystem
[ 0.041395] DMI not present or invalid.
[ 0.041886] NET: Registered protocol family 16
[ 0.043203] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.043250] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.043361] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.043438] audit: initializing netlink subsys (disabled)
[ 0.043590] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.044851] thermal_sys: Registered thermal governor 'step_wise'
[ 0.044857] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.045189] cpuidle: using governor menu
[ 0.045345] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.045450] ASID allocator initialised with 65536 entries
[ 0.047163] Serial: AMBA PL011 UART driver
[ 0.094129] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.094144] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.094151] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.094158] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.095243] cryptd: max_cpu_qlen set to 1000
[ 0.097462] ACPI: Interpreter disabled.
[ 0.100245] VSYS_3V3: supplied by DC_IN
[ 0.101006] iommu: Default domain type: Translated
[ 0.101264] vgaarb: loaded
[ 0.101533] SCSI subsystem initialized
[ 0.101910] usbcore: registered new interface driver usbfs
[ 0.101950] usbcore: registered new interface driver hub
[ 0.102009] usbcore: registered new device driver usb
[ 0.102845] pps_core: LinuxPPS API ver. 1 registered
[ 0.102852] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.102868] PTP clock support registered
[ 0.103019] EDAC MC: Ver: 3.0.0
[ 0.104725] FPGA manager framework
[ 0.104818] Advanced Linux Sound Architecture Driver Initialized.
[ 0.105515] clocksource: Switched to clocksource arch_sys_counter
[ 0.105695] VFS: Disk quotas dquot_6.6.0
[ 0.105748] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.105920] pnp: PnP ACPI: disabled
[ 0.111989] NET: Registered protocol family 2
[ 0.112333] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.112363] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.112459] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.112624] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.112718] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.112754] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.112888] NET: Registered protocol family 1
[ 0.113295] RPC: Registered named UNIX socket transport module.
[ 0.113303] RPC: Registered udp transport module.
[ 0.113308] RPC: Registered tcp transport module.
[ 0.113313] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.113323] PCI: CLS 0 bytes, default 64
[ 0.113494] Unpacking initramfs...
[ 0.757051] Freeing initrd memory: 15220K
[ 0.757975] kvm [1]: IPA Size Limit: 40 bits
[ 0.758106] kvm [1]: vgic interrupt IRQ9
[ 0.758239] kvm [1]: VHE mode initialized successfully
[ 0.761737] Initialise system trusted keyrings
[ 0.761875] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 0.767592] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.768240] NFS: Registering the id_resolver key type
[ 0.768264] Key type id_resolver registered
[ 0.768270] Key type id_legacy registered
[ 0.768351] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.768499] 9p: Installing v9fs 9p2000 file system support
[ 0.804991] Key type asymmetric registered
[ 0.805000] Asymmetric key parser 'x509' registered
[ 0.805034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.805042] io scheduler mq-deadline registered
[ 0.805048] io scheduler kyber registered
[ 0.820372] EINJ: ACPI disabled.
[ 0.834593] soc soc0: Amlogic Meson SM1 (S905D3) Revision 2b:c (4:2) Detected
[ 0.843406] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.846185] SuperH (H)SCI(F) driver initialized
[ 0.846878] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart
[ 1.715908] printk: console [ttyAML0] enabled
[ 1.720868] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart
[ 1.729659] serial serial0: tty port ttyAML6 registered
[ 1.735155] msm_serial: driver initialized
[ 1.747269] loop: module loaded
[ 1.748427] megasas: 07.714.04.00-rc1
[ 1.753838] libphy: Fixed MDIO Bus: probed
[ 1.755098] tun: Universal TUN/TAP device driver, 1.6
[ 1.758461] thunder_xcv, ver 1.0
[ 1.760686] thunder_bgx, ver 1.0
[ 1.763896] nicpf, ver 1.0
[ 1.767908] hclge is initializing
[ 1.769859] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.776973] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.782295] e1000: Intel(R) PRO/1000 Network Driver
[ 1.787059] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.792790] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.797667] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.803570] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.808882] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.814431] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.820609] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.826947] sky2: driver version 1.30
[ 1.831453] VFIO - User Level meta-driver version: 0.3
[ 1.837540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.841657] ehci-pci: EHCI PCI platform driver
[ 1.846091] ehci-platform: EHCI generic platform driver
[ 1.851411] ehci-orion: EHCI orion driver
[ 1.855331] ehci-exynos: EHCI Exynos driver
[ 1.859453] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.865480] ohci-pci: OHCI PCI platform driver
[ 1.869894] ohci-platform: OHCI generic platform driver
[ 1.875179] ohci-exynos: OHCI Exynos driver
[ 1.879820] usbcore: registered new interface driver usb-storage
[ 1.888415] i2c /dev entries driver
[ 1.889925] VCC_3V3: supplied by VSYS_3V3
[ 1.892652] pca953x 0-0020: using no AI
[ 1.905395] sdhci: Secure Digital Host Controller Interface driver
[ 1.906001] sdhci: Copyright(c) Pierre Ossman
[ 1.911018] Synopsys Designware Multimedia Card Interface Driver
[ 1.917648] VDDIO_AO1V8: supplied by VSYS_3V3
[ 1.917794] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.917891] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 1.918956] EMMC_AO1V8: supplied by VCC_3V3
[ 1.919128] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[ 1.944551] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.947066] meson-sm: secure-monitor enabled
[ 1.951732] usbcore: registered new interface driver usbhid
[ 1.956145] usbhid: USB HID core driver
[ 1.969608] NET: Registered protocol family 17
[ 1.969774] 9pnet: Installing 9P2000 support
[ 1.972695] Key type dns_resolver registered
[ 1.977201] registered taskstats version 1
[ 1.980947] Loading compiled-in X.509 certificates
[ 2.000216] VCC_1V8: supplied by VCC_3V3
[ 2.000292] VCC_5V: supplied by DC_IN
[ 2.002727] USB_PWR: supplied by VCC_5V
[ 2.012712] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[ 2.012746] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[ 2.021504] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[ 2.024644] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[ 2.031863] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 2.040745] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.044095] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.051767] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[ 2.061004] xhci-hcd xhci-hcd.0.auto: irq 38, io mem 0xff500000
[ 2.067504] hub 1-0:1.0: USB hub found
[ 2.070555] hub 1-0:1.0: 2 ports detected
[ 2.074792] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.079939] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.087528] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.094033] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.102426] hub 2-0:1.0: USB hub found
[ 2.105742] hub 2-0:1.0: 1 port detected
[ 2.108013] mmc2: new HS200 MMC card at address 0001
[ 2.115194] mmcblk2: mmc2:0001 AJTD4R 14.6 GiB
[ 2.119317] mmcblk2boot0: mmc2:0001 AJTD4R partition 1 4.00 MiB
[ 2.123008] ALSA device list:
[ 2.125139] mmcblk2boot1: mmc2:0001 AJTD4R partition 2 4.00 MiB
[ 2.127825] No soundcards found.
[ 2.133841] mmcblk2rpmb: mmc2:0001 AJTD4R partition 3 4.00 MiB, chardev (234:0)
[ 2.139106] Freeing unused kernel memory: 5952K
[ 2.147508] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 2.161599] Run /init as init process
# PYBOOT: kernel: finished booting, starting userspace.
[ 2.216689] udevd[147]: starting version 3.2.9
[ 2.217441] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.222071] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.228339] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.239835] udevd[148]: starting eudev-3.2.9
[ 2.409604] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.413745] input: adc-keys as /devices/platform/adc-keys/input/input0
[ 2.581472] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[ 2.598429] panfrost ffe40000.gpu: clock rate = 24000000
[ 2.598539] panfrost ffe40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[ 2.606298] hub 1-1:1.0: USB hub found
[ 2.610299] hub 1-1:1.0: 4 ports detected
[ 2.625166] meson-gpio-intc ffd0f080.interrupt-controller: 100 to 8 gpio interrupt mux initialized
[ 2.630500] panfrost ffe40000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device
[ 2.666788] meson-vrtc ff8000a8.rtc: registered as rtc0
[ 2.666861] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[ 2.675628] panfrost ffe40000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
[ 2.683070] panfrost ffe40000.gpu: features: 00000000,3fde77ff, issues: 00000000,00000400
[ 2.690275] panfrost ffe40000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[ 2.701558] Registered IR keymap rc-khadas
[ 2.703102] panfrost ffe40000.gpu: shader_present=0x1 l2_present=0x1
[ 2.711210] VDDCPU: supplied by regulator-dummy
[ 2.719518] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[ 2.723383] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[ 2.729680] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[ 2.736803] meson8b-dwmac ff3f0000.ethernet: no reset control found
[ 2.745604] rc_core: Loaded IR protocol module ir-nec-decoder, but protocol nec still not available
[ 2.745634] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 2.749990] [drm] Initialized panfrost 1.1.0 20180908 for ffe40000.gpu on minor 0
[ 2.750670] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[ 2.757652] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
[ 2.757665] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[ 2.761805] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
[ 2.766764] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input1
[ 2.772832] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[ 2.772837] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[ 2.772839] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[ 2.772841] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[ 2.772919] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[ 2.778444] meson-ir ff808000.ir: receiver initialized
[ 2.785580] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[ 2.812678] meson-drm ff900000.vpu: CVBS Output connector not available
[ 2.818802] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.855700] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 2.856686] libphy: stmmac: probed
[ 2.869708] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 2.874474] libphy: mdio_mux: probed
[ 2.880010] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.888353] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.893796] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.895356] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 2.900810] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.906819] random: fast init done
[ 2.907668] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 1
[ 2.924169] libphy: mdio_mux: probed
[ 2.927005] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[ 2.929560] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[ 2.979412] Bluetooth: Core ver 2.22
[ 2.979529] NET: Registered protocol family 31
[ 2.983502] Bluetooth: HCI device and connection manager initialized
[ 2.988240] Bluetooth: HCI socket layer initialized
[ 2.993054] Bluetooth: L2CAP socket layer initialized
[ 2.998047] Bluetooth: SCO socket layer initialized
[ 3.008102] Bluetooth: HCI UART driver ver 2.3
[ 3.008132] Bluetooth: HCI UART protocol H4 registered
[ 3.012496] Bluetooth: HCI UART protocol LL registered
[ 3.018922] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 3.025093] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 3.032499] Bluetooth: HCI UART protocol Broadcom registered
[ 3.037844] Bluetooth: HCI UART protocol QCA registered
[ 3.056314] mmc0: new high speed SDIO card at address 0001
[ 3.066154] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.084925] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.085036] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.085040] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 3.095498] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9
[ 3.095673] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4359-sdio.bin failed with error -2
[ 3.095678] brcmfmac mmc0:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4359-sdio.bin
[ 3.152665] input: Logitech USB Receiver as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input2
[ 3.210334] hid-generic 0003:046D:C534.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0
[ 3.210422] Console: switching to colour frame buffer device 480x135
[ 3.217382] input: Logitech USB Receiver Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input3
[ 3.218050] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input4
[ 3.278033] input: Logitech USB Receiver System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input5
[ 3.279153] hid-generic 0003:046D:C534.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1
[ 3.394143] Bluetooth: hci0: BCM: chip id 121
[ 3.404246] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 3.416359] Bluetooth: hci0: BCM: features 0x0e
[ 3.499719] Bluetooth: hci0: BCM4359C0
[ 3.500759] Bluetooth: hci0: BCM4359C0 (003.001.006) build 0000
[ 3.520060] axg-sound-card sound: ASoC: no DMI vendor name!
[ 3.534874] urandom_read: 3 callbacks suppressed
[ 3.534881] random: dd: uninitialized urandom read (512 bytes read)
[ 3.577752] random: dropbear: uninitialized urandom read (32 bytes read)
[ 3.596038] NET: Registered protocol family 10
[ 3.596774] Segment Routing with IPv6
/bin/sh: can't access tty; job control turned off
/ #
# PYBOOT: userspace: at root shell
cat /proc/cmdline
cat /proc/cmdline
console=ttyAML0,115200
/ # uname -r
uname -r
5.10.0-rc1-00002-g4b28e5bd6b6a
/ # cat /proc/cpuinfo
cat /proc/cpuinfo
processor: 0
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 1
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 2
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 3
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
/ # lsmod
lsmod
Module Size Used by Not tainted
ipv6 438272 18 [permanent]
snd_soc_hdmi_codec 16384 1
dw_hdmi_i2s_audio 16384 0
dw_hdmi_cec 16384 0
brcmfmac 245760 1
brcmutil 20480 1 brcmfmac
cfg80211 364544 2 brcmfmac
hci_uart 77824 0
btqca 16384 1 hci_uart
btbcm 24576 1 hci_uart
bluetooth 397312 4 hci_uart,btqca,btbcm
ecdh_generic 16384 1 bluetooth
snd_soc_meson_axg_frddr 36864 3
ecc 32768 1 ecdh_generic
rfkill 36864 2 cfg80211,bluetooth
meson_gxl 16384 0
snd_soc_meson_g12a_tohdmitx 20480 1
realtek 20480 0
snd_soc_meson_codec_glue 16384 1 snd_soc_meson_g12a_tohdmitx
meson_rng 16384 0
axg_audio 77824 13
dwmac_generic 16384 0
reset_meson_audio_arb 16384 3
snd_soc_meson_axg_fifo 16384 1 snd_soc_meson_axg_frddr
snd_soc_meson_axg_tdmout 24576 1
rng_core 24576 1 meson_rng
meson_dw_hdmi 20480 0
dw_hdmi 45056 2 dw_hdmi_i2s_audio,meson_dw_hdmi
sclk_div 16384 1 axg_audio
clk_phase 16384 1 axg_audio
mdio_mux_meson_g12a 16384 0
cec 57344 2 dw_hdmi_cec,dw_hdmi
dwmac_meson8b 16384 0
stmmac_platform 20480 2 dwmac_generic,dwmac_meson8b
pwm_meson 16384 2
stmmac 184320 3 dwmac_generic,dwmac_meson8b,stmmac_platform
rc_khadas 16384 0
meson_ir 16384 0
rc_core 40960 3 rc_khadas,meson_ir
rtc_meson_vrtc 16384 1
irq_meson_gpio 20480 0
pcs_xpcs 20480 1 stmmac
panfrost 61440 0
meson_drm 61440 1 meson_dw_hdmi
gpu_sched 32768 1 panfrost
meson_canvas 16384 1 meson_drm
drm_kms_helper 241664 5 meson_dw_hdmi,dw_hdmi,meson_drm
snd_soc_meson_axg_sound_card 16384 0
snd_soc_meson_card_utils 16384 1 snd_soc_meson_axg_sound_card
crct10dif_ce 20480 1
display_connector 16384 0
snd_soc_meson_axg_tdm_interface 16384 2 snd_soc_meson_axg_sound_card
drm 565248 8 meson_dw_hdmi,dw_hdmi,panfrost,meson_drm,gpu_sched,drm_kms_helper,display_connector
snd_soc_meson_axg_tdm_formatter 16384 2 snd_soc_meson_axg_tdmout,snd_soc_meson_axg_tdm_interface
nvmem_meson_efuse 16384 0
adc_keys 16384 0
/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 3a:62:88:b7:d1:2c brd ff:ff:ff:ff:ff:ff
/ # udhcpc
udhcpc: started, v1.31.1
[ 8.576234] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=39)
[ 8.589563] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[ 8.591492] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[ 8.598574] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
udhcpc: sending discover
[ 11.200356] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 11.203516] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
udhcpc: sending discover
udhcpc: sending select for 192.168.0.143
udhcpc: lease of 192.168.0.143 obtained, lease time 86400
deleting routers
adding dns 192.168.0.254
adding dns 192.168.0.254
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Marc Zyngier <maz@kernel.org>
Cc: linux-amlogic@lists.infradead.org, jbrunet@baylibre.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH 0/2] irq-meson-gpio: make it possible to build as a module
Date: Mon, 26 Oct 2020 10:33:09 -0700 [thread overview]
Message-ID: <7hv9ewhoyy.fsf@baylibre.com> (raw)
In-Reply-To: <7hy2jshp6w.fsf@baylibre.com>
Kevin Hilman <khilman@baylibre.com> writes:
> Marc Zyngier <maz@kernel.org> writes:
>
>> On 2020-10-26 16:18, Kevin Hilman wrote:
>>> Marc Zyngier <maz@kernel.org> writes:
>>>
>>>> On Tue, 20 Oct 2020 08:25:30 +0100,
>>>> Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>>
>>>>> In order to reduce the kernel Image size on multi-platform
>>>>> distributions,
>>>>> make it possible to build the Amlogic GPIO IRQ controller as a module
>>>>> by switching it to a platform driver.
>>>>>
>>>>> The second patch removes MESON_IRQ_GPIO selection from ARCH_MESON to
>>>>> allow
>>>>> building the driver as module.
>>>>>
>>>>> Neil Armstrong (2):
>>>>> irqchip: irq-meson-gpio: make it possible to build as a module
>>>>> arm64: meson: remove MESON_IRQ_GPIO selection
>>>>>
>>>>> arch/arm64/Kconfig.platforms | 1 -
>>>>> drivers/irqchip/Kconfig | 5 +-
>>>>> drivers/irqchip/irq-meson-gpio.c | 89
>>>>> ++++++++++++++++++++------------
>>>>> 3 files changed, 59 insertions(+), 36 deletions(-)
>>>>
>>>> I've tried this series on my vim3l with the this driver compiled as a
>>>> module, and lost the Ethernet interface in the process, as the phy
>>>> wasn't able to resolve its interrupt and things fail later on:
>>>>
>>>> [ 72.238291] meson8b-dwmac ff3f0000.ethernet eth1: no phy at addr -1
>>>> [ 72.238917] meson8b-dwmac ff3f0000.ethernet eth1: stmmac_open:
>>>> Cannot attach to PHY (error: -19)
>>>>
>>>> This is a generic problem with making DT-based interrupt controllers
>>>> modular when not *all* the drivers can deal with probing deferral.
>>>
>>> Yes, but this series still keeps the default as built-in.
>>>
>>> If you build as a module, and you add `fw_devlink=on` to the kernel
>>> command-line, device-links will be created based on DT dependencies
>>> which will ensure the right module load order.
>>
>> It doesn't work here. I get the exact same error (well, with eth0
>> instead
>> of eth1). In my experience, fw_devlink isn't reliable yet. Config on
>> request.
>
> Other than CONFIG_MESON_IRQ_GPIO=m, are you using default upstream
> defconfig?
>
> I just double-checked with this series on top of v5.10-rc1, and I have
> eth0 working with interrupts without needing fw_devlink=on.
>
> With the default upstream defconfig all the networking for these devices
> is already configured as modules.
Forgot to include a full boot log:
U-Boot 2020.07-00031-gb35ed474d2b4 (Sep 14 2020 - 11:11:52 -0700) khadas-vim3l
Model: Khadas VIM3L
SoC: Amlogic Meson SM1 (Unknown) Revision 2b:c (4:2)
DRAM: 2 GiB
MMC: sd@ffe03000: 0, sd@ffe05000: 1, mmc@ffe07000: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@3000
Out: serial@3000
Err: serial@3000
Net: eth0: ethernet@ff3f0000
Verify GPT: success!
switch to partitions #0, OK
mmc2(part 0) is current device
MMC read: dev # 2, block # 1024, count 4096 ... 4096 blocks read: OK
Hit any key to stop autoboot: 2
# PYBOOT: u-boot: taking control.
0
=>
=> version
version
U-Boot 2020.07-00031-gb35ed474d2b4 (Sep 14 2020 - 11:11:52 -0700) khadas-vim3l
aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0
GNU ld (GNU Binutils for Debian) 2.31.1
=> setenv preboot
setenv preboot
=> setenv bootargs console=ttyAML0,115200
setenv bootargs console=ttyAML0,115200
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no
setenv autoload no
=> setenv autoboot no
setenv autoboot no
=> dhcp
dhcp
ethernet@ff3f0000 Waiting for PHY auto negotiation to complete.... done
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.0.143 (2 ms)
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x03000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz
tftp 0x03000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz'.
Load address: 0x3000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#####################################################T ############
#################################################################
#################################################################
#################################################################
#################################################################
###############################
736.3 KiB/s
done
Bytes transferred = 10945439 (a7039f hex)
=> tftp 0x08000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz
tftp 0x08000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz'.
Load address: 0x8000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################
1.3 MiB/s
done
Bytes transferred = 15588406 (eddc36 hex)
=> tftp 0x01000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb
tftp 0x01000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb'.
Load address: 0x1000000
Loading: *####
937.5 KiB/s
done
Bytes transferred = 48988 (bf5c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttyAML0,115200
=> unzip 0x03000000 0x01080000
booti 0x01080000 - 0x01000000
# PYBOOT: u-boot: jumping to kernel image
unzip 0x03000000 0x01080000
Uncompressed size: 31179264 = 0x1DBC200
=> booti 0x01080000 - 0x01000000
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
Loading Device Tree to 0000000075f12000, end 0000000075f20f5b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[ 0.000000] Linux version 5.10.0-rc1-00002-g4b28e5bd6b6a (KernelCI@paris) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #232 SMP PREEMPT Mon Oct 26 10:18:47 PDT 2020
[ 0.000000] Machine model: Khadas VIM3L
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000065c00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007f806fff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7f3bd100-0x7f3befff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007f806fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x000000007f806fff]
[ 0.000000] Zeroed struct page in unavailable ranges: 505 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007f806fff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 23 pages/cpu s56152 r8192 d29864 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 513318
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: console=ttyAML0,115200
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB)
[ 0.000000] Memory: 1670932K/2085916K available (14076K kernel code, 2800K rwdata, 7572K rodata, 5952K init, 515K bss, 152840K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4d4 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000250] Console: colour dummy device 80x25
[ 0.000332] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000346] pid_max: default: 32768 minimum: 301
[ 0.000420] LSM: Security Framework initializing
[ 0.000477] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000492] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001786] rcu: Hierarchical SRCU implementation.
[ 0.005342] EFI services will not be available.
[ 0.005582] smp: Bringing up secondary CPUs ...
[ 0.006335] Detected VIPT I-cache on CPU1
[ 0.006396] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[ 0.007183] Detected VIPT I-cache on CPU2
[ 0.007225] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[ 0.007992] Detected VIPT I-cache on CPU3
[ 0.008031] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[ 0.008103] smp: Brought up 1 node, 4 CPUs
[ 0.008125] SMP: Total of 4 processors activated.
[ 0.008132] CPU features: detected: Privileged Access Never
[ 0.008137] CPU features: detected: LSE atomic instructions
[ 0.008142] CPU features: detected: User Access Override
[ 0.008147] CPU features: detected: 32-bit EL0 Support
[ 0.008153] CPU features: detected: Common not Private translations
[ 0.008158] CPU features: detected: RAS Extension Support
[ 0.008163] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.008168] CPU features: detected: CRC32 instructions
[ 0.008175] CPU features: detected: 32-bit EL1 Support
[ 0.023411] CPU: All CPU(s) started at EL2
[ 0.025215] devtmpfs: initialized
[ 0.033707] KASLR disabled due to lack of seed
[ 0.034072] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.034090] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.039946] pinctrl core: initialized pinctrl subsystem
[ 0.041395] DMI not present or invalid.
[ 0.041886] NET: Registered protocol family 16
[ 0.043203] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.043250] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.043361] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.043438] audit: initializing netlink subsys (disabled)
[ 0.043590] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.044851] thermal_sys: Registered thermal governor 'step_wise'
[ 0.044857] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.045189] cpuidle: using governor menu
[ 0.045345] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.045450] ASID allocator initialised with 65536 entries
[ 0.047163] Serial: AMBA PL011 UART driver
[ 0.094129] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.094144] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.094151] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.094158] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.095243] cryptd: max_cpu_qlen set to 1000
[ 0.097462] ACPI: Interpreter disabled.
[ 0.100245] VSYS_3V3: supplied by DC_IN
[ 0.101006] iommu: Default domain type: Translated
[ 0.101264] vgaarb: loaded
[ 0.101533] SCSI subsystem initialized
[ 0.101910] usbcore: registered new interface driver usbfs
[ 0.101950] usbcore: registered new interface driver hub
[ 0.102009] usbcore: registered new device driver usb
[ 0.102845] pps_core: LinuxPPS API ver. 1 registered
[ 0.102852] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.102868] PTP clock support registered
[ 0.103019] EDAC MC: Ver: 3.0.0
[ 0.104725] FPGA manager framework
[ 0.104818] Advanced Linux Sound Architecture Driver Initialized.
[ 0.105515] clocksource: Switched to clocksource arch_sys_counter
[ 0.105695] VFS: Disk quotas dquot_6.6.0
[ 0.105748] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.105920] pnp: PnP ACPI: disabled
[ 0.111989] NET: Registered protocol family 2
[ 0.112333] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.112363] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.112459] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.112624] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.112718] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.112754] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.112888] NET: Registered protocol family 1
[ 0.113295] RPC: Registered named UNIX socket transport module.
[ 0.113303] RPC: Registered udp transport module.
[ 0.113308] RPC: Registered tcp transport module.
[ 0.113313] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.113323] PCI: CLS 0 bytes, default 64
[ 0.113494] Unpacking initramfs...
[ 0.757051] Freeing initrd memory: 15220K
[ 0.757975] kvm [1]: IPA Size Limit: 40 bits
[ 0.758106] kvm [1]: vgic interrupt IRQ9
[ 0.758239] kvm [1]: VHE mode initialized successfully
[ 0.761737] Initialise system trusted keyrings
[ 0.761875] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 0.767592] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.768240] NFS: Registering the id_resolver key type
[ 0.768264] Key type id_resolver registered
[ 0.768270] Key type id_legacy registered
[ 0.768351] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.768499] 9p: Installing v9fs 9p2000 file system support
[ 0.804991] Key type asymmetric registered
[ 0.805000] Asymmetric key parser 'x509' registered
[ 0.805034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.805042] io scheduler mq-deadline registered
[ 0.805048] io scheduler kyber registered
[ 0.820372] EINJ: ACPI disabled.
[ 0.834593] soc soc0: Amlogic Meson SM1 (S905D3) Revision 2b:c (4:2) Detected
[ 0.843406] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.846185] SuperH (H)SCI(F) driver initialized
[ 0.846878] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart
[ 1.715908] printk: console [ttyAML0] enabled
[ 1.720868] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart
[ 1.729659] serial serial0: tty port ttyAML6 registered
[ 1.735155] msm_serial: driver initialized
[ 1.747269] loop: module loaded
[ 1.748427] megasas: 07.714.04.00-rc1
[ 1.753838] libphy: Fixed MDIO Bus: probed
[ 1.755098] tun: Universal TUN/TAP device driver, 1.6
[ 1.758461] thunder_xcv, ver 1.0
[ 1.760686] thunder_bgx, ver 1.0
[ 1.763896] nicpf, ver 1.0
[ 1.767908] hclge is initializing
[ 1.769859] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.776973] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.782295] e1000: Intel(R) PRO/1000 Network Driver
[ 1.787059] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.792790] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.797667] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.803570] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.808882] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.814431] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.820609] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.826947] sky2: driver version 1.30
[ 1.831453] VFIO - User Level meta-driver version: 0.3
[ 1.837540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.841657] ehci-pci: EHCI PCI platform driver
[ 1.846091] ehci-platform: EHCI generic platform driver
[ 1.851411] ehci-orion: EHCI orion driver
[ 1.855331] ehci-exynos: EHCI Exynos driver
[ 1.859453] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.865480] ohci-pci: OHCI PCI platform driver
[ 1.869894] ohci-platform: OHCI generic platform driver
[ 1.875179] ohci-exynos: OHCI Exynos driver
[ 1.879820] usbcore: registered new interface driver usb-storage
[ 1.888415] i2c /dev entries driver
[ 1.889925] VCC_3V3: supplied by VSYS_3V3
[ 1.892652] pca953x 0-0020: using no AI
[ 1.905395] sdhci: Secure Digital Host Controller Interface driver
[ 1.906001] sdhci: Copyright(c) Pierre Ossman
[ 1.911018] Synopsys Designware Multimedia Card Interface Driver
[ 1.917648] VDDIO_AO1V8: supplied by VSYS_3V3
[ 1.917794] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.917891] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 1.918956] EMMC_AO1V8: supplied by VCC_3V3
[ 1.919128] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[ 1.944551] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.947066] meson-sm: secure-monitor enabled
[ 1.951732] usbcore: registered new interface driver usbhid
[ 1.956145] usbhid: USB HID core driver
[ 1.969608] NET: Registered protocol family 17
[ 1.969774] 9pnet: Installing 9P2000 support
[ 1.972695] Key type dns_resolver registered
[ 1.977201] registered taskstats version 1
[ 1.980947] Loading compiled-in X.509 certificates
[ 2.000216] VCC_1V8: supplied by VCC_3V3
[ 2.000292] VCC_5V: supplied by DC_IN
[ 2.002727] USB_PWR: supplied by VCC_5V
[ 2.012712] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[ 2.012746] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[ 2.021504] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[ 2.024644] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[ 2.031863] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 2.040745] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.044095] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.051767] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[ 2.061004] xhci-hcd xhci-hcd.0.auto: irq 38, io mem 0xff500000
[ 2.067504] hub 1-0:1.0: USB hub found
[ 2.070555] hub 1-0:1.0: 2 ports detected
[ 2.074792] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.079939] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.087528] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.094033] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.102426] hub 2-0:1.0: USB hub found
[ 2.105742] hub 2-0:1.0: 1 port detected
[ 2.108013] mmc2: new HS200 MMC card at address 0001
[ 2.115194] mmcblk2: mmc2:0001 AJTD4R 14.6 GiB
[ 2.119317] mmcblk2boot0: mmc2:0001 AJTD4R partition 1 4.00 MiB
[ 2.123008] ALSA device list:
[ 2.125139] mmcblk2boot1: mmc2:0001 AJTD4R partition 2 4.00 MiB
[ 2.127825] No soundcards found.
[ 2.133841] mmcblk2rpmb: mmc2:0001 AJTD4R partition 3 4.00 MiB, chardev (234:0)
[ 2.139106] Freeing unused kernel memory: 5952K
[ 2.147508] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 2.161599] Run /init as init process
# PYBOOT: kernel: finished booting, starting userspace.
[ 2.216689] udevd[147]: starting version 3.2.9
[ 2.217441] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.222071] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.228339] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.239835] udevd[148]: starting eudev-3.2.9
[ 2.409604] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.413745] input: adc-keys as /devices/platform/adc-keys/input/input0
[ 2.581472] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[ 2.598429] panfrost ffe40000.gpu: clock rate = 24000000
[ 2.598539] panfrost ffe40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[ 2.606298] hub 1-1:1.0: USB hub found
[ 2.610299] hub 1-1:1.0: 4 ports detected
[ 2.625166] meson-gpio-intc ffd0f080.interrupt-controller: 100 to 8 gpio interrupt mux initialized
[ 2.630500] panfrost ffe40000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device
[ 2.666788] meson-vrtc ff8000a8.rtc: registered as rtc0
[ 2.666861] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[ 2.675628] panfrost ffe40000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
[ 2.683070] panfrost ffe40000.gpu: features: 00000000,3fde77ff, issues: 00000000,00000400
[ 2.690275] panfrost ffe40000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[ 2.701558] Registered IR keymap rc-khadas
[ 2.703102] panfrost ffe40000.gpu: shader_present=0x1 l2_present=0x1
[ 2.711210] VDDCPU: supplied by regulator-dummy
[ 2.719518] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[ 2.723383] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[ 2.729680] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[ 2.736803] meson8b-dwmac ff3f0000.ethernet: no reset control found
[ 2.745604] rc_core: Loaded IR protocol module ir-nec-decoder, but protocol nec still not available
[ 2.745634] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 2.749990] [drm] Initialized panfrost 1.1.0 20180908 for ffe40000.gpu on minor 0
[ 2.750670] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[ 2.757652] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
[ 2.757665] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[ 2.761805] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
[ 2.766764] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input1
[ 2.772832] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[ 2.772837] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[ 2.772839] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[ 2.772841] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[ 2.772919] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[ 2.778444] meson-ir ff808000.ir: receiver initialized
[ 2.785580] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[ 2.812678] meson-drm ff900000.vpu: CVBS Output connector not available
[ 2.818802] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.855700] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 2.856686] libphy: stmmac: probed
[ 2.869708] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 2.874474] libphy: mdio_mux: probed
[ 2.880010] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.888353] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.893796] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.895356] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 2.900810] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.906819] random: fast init done
[ 2.907668] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 1
[ 2.924169] libphy: mdio_mux: probed
[ 2.927005] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[ 2.929560] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[ 2.979412] Bluetooth: Core ver 2.22
[ 2.979529] NET: Registered protocol family 31
[ 2.983502] Bluetooth: HCI device and connection manager initialized
[ 2.988240] Bluetooth: HCI socket layer initialized
[ 2.993054] Bluetooth: L2CAP socket layer initialized
[ 2.998047] Bluetooth: SCO socket layer initialized
[ 3.008102] Bluetooth: HCI UART driver ver 2.3
[ 3.008132] Bluetooth: HCI UART protocol H4 registered
[ 3.012496] Bluetooth: HCI UART protocol LL registered
[ 3.018922] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 3.025093] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 3.032499] Bluetooth: HCI UART protocol Broadcom registered
[ 3.037844] Bluetooth: HCI UART protocol QCA registered
[ 3.056314] mmc0: new high speed SDIO card at address 0001
[ 3.066154] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.084925] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.085036] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.085040] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 3.095498] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9
[ 3.095673] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4359-sdio.bin failed with error -2
[ 3.095678] brcmfmac mmc0:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4359-sdio.bin
[ 3.152665] input: Logitech USB Receiver as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input2
[ 3.210334] hid-generic 0003:046D:C534.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0
[ 3.210422] Console: switching to colour frame buffer device 480x135
[ 3.217382] input: Logitech USB Receiver Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input3
[ 3.218050] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input4
[ 3.278033] input: Logitech USB Receiver System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input5
[ 3.279153] hid-generic 0003:046D:C534.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1
[ 3.394143] Bluetooth: hci0: BCM: chip id 121
[ 3.404246] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 3.416359] Bluetooth: hci0: BCM: features 0x0e
[ 3.499719] Bluetooth: hci0: BCM4359C0
[ 3.500759] Bluetooth: hci0: BCM4359C0 (003.001.006) build 0000
[ 3.520060] axg-sound-card sound: ASoC: no DMI vendor name!
[ 3.534874] urandom_read: 3 callbacks suppressed
[ 3.534881] random: dd: uninitialized urandom read (512 bytes read)
[ 3.577752] random: dropbear: uninitialized urandom read (32 bytes read)
[ 3.596038] NET: Registered protocol family 10
[ 3.596774] Segment Routing with IPv6
/bin/sh: can't access tty; job control turned off
/ #
# PYBOOT: userspace: at root shell
cat /proc/cmdline
cat /proc/cmdline
console=ttyAML0,115200
/ # uname -r
uname -r
5.10.0-rc1-00002-g4b28e5bd6b6a
/ # cat /proc/cpuinfo
cat /proc/cpuinfo
processor: 0
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 1
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 2
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 3
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
/ # lsmod
lsmod
Module Size Used by Not tainted
ipv6 438272 18 [permanent]
snd_soc_hdmi_codec 16384 1
dw_hdmi_i2s_audio 16384 0
dw_hdmi_cec 16384 0
brcmfmac 245760 1
brcmutil 20480 1 brcmfmac
cfg80211 364544 2 brcmfmac
hci_uart 77824 0
btqca 16384 1 hci_uart
btbcm 24576 1 hci_uart
bluetooth 397312 4 hci_uart,btqca,btbcm
ecdh_generic 16384 1 bluetooth
snd_soc_meson_axg_frddr 36864 3
ecc 32768 1 ecdh_generic
rfkill 36864 2 cfg80211,bluetooth
meson_gxl 16384 0
snd_soc_meson_g12a_tohdmitx 20480 1
realtek 20480 0
snd_soc_meson_codec_glue 16384 1 snd_soc_meson_g12a_tohdmitx
meson_rng 16384 0
axg_audio 77824 13
dwmac_generic 16384 0
reset_meson_audio_arb 16384 3
snd_soc_meson_axg_fifo 16384 1 snd_soc_meson_axg_frddr
snd_soc_meson_axg_tdmout 24576 1
rng_core 24576 1 meson_rng
meson_dw_hdmi 20480 0
dw_hdmi 45056 2 dw_hdmi_i2s_audio,meson_dw_hdmi
sclk_div 16384 1 axg_audio
clk_phase 16384 1 axg_audio
mdio_mux_meson_g12a 16384 0
cec 57344 2 dw_hdmi_cec,dw_hdmi
dwmac_meson8b 16384 0
stmmac_platform 20480 2 dwmac_generic,dwmac_meson8b
pwm_meson 16384 2
stmmac 184320 3 dwmac_generic,dwmac_meson8b,stmmac_platform
rc_khadas 16384 0
meson_ir 16384 0
rc_core 40960 3 rc_khadas,meson_ir
rtc_meson_vrtc 16384 1
irq_meson_gpio 20480 0
pcs_xpcs 20480 1 stmmac
panfrost 61440 0
meson_drm 61440 1 meson_dw_hdmi
gpu_sched 32768 1 panfrost
meson_canvas 16384 1 meson_drm
drm_kms_helper 241664 5 meson_dw_hdmi,dw_hdmi,meson_drm
snd_soc_meson_axg_sound_card 16384 0
snd_soc_meson_card_utils 16384 1 snd_soc_meson_axg_sound_card
crct10dif_ce 20480 1
display_connector 16384 0
snd_soc_meson_axg_tdm_interface 16384 2 snd_soc_meson_axg_sound_card
drm 565248 8 meson_dw_hdmi,dw_hdmi,panfrost,meson_drm,gpu_sched,drm_kms_helper,display_connector
snd_soc_meson_axg_tdm_formatter 16384 2 snd_soc_meson_axg_tdmout,snd_soc_meson_axg_tdm_interface
nvmem_meson_efuse 16384 0
adc_keys 16384 0
/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 3a:62:88:b7:d1:2c brd ff:ff:ff:ff:ff:ff
/ # udhcpc
udhcpc: started, v1.31.1
[ 8.576234] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=39)
[ 8.589563] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[ 8.591492] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[ 8.598574] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
udhcpc: sending discover
[ 11.200356] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 11.203516] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
udhcpc: sending discover
udhcpc: sending select for 192.168.0.143
udhcpc: lease of 192.168.0.143 obtained, lease time 86400
deleting routers
adding dns 192.168.0.254
adding dns 192.168.0.254
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Marc Zyngier <maz@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>,
jbrunet@baylibre.com, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/2] irq-meson-gpio: make it possible to build as a module
Date: Mon, 26 Oct 2020 10:33:09 -0700 [thread overview]
Message-ID: <7hv9ewhoyy.fsf@baylibre.com> (raw)
In-Reply-To: <7hy2jshp6w.fsf@baylibre.com>
Kevin Hilman <khilman@baylibre.com> writes:
> Marc Zyngier <maz@kernel.org> writes:
>
>> On 2020-10-26 16:18, Kevin Hilman wrote:
>>> Marc Zyngier <maz@kernel.org> writes:
>>>
>>>> On Tue, 20 Oct 2020 08:25:30 +0100,
>>>> Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>>
>>>>> In order to reduce the kernel Image size on multi-platform
>>>>> distributions,
>>>>> make it possible to build the Amlogic GPIO IRQ controller as a module
>>>>> by switching it to a platform driver.
>>>>>
>>>>> The second patch removes MESON_IRQ_GPIO selection from ARCH_MESON to
>>>>> allow
>>>>> building the driver as module.
>>>>>
>>>>> Neil Armstrong (2):
>>>>> irqchip: irq-meson-gpio: make it possible to build as a module
>>>>> arm64: meson: remove MESON_IRQ_GPIO selection
>>>>>
>>>>> arch/arm64/Kconfig.platforms | 1 -
>>>>> drivers/irqchip/Kconfig | 5 +-
>>>>> drivers/irqchip/irq-meson-gpio.c | 89
>>>>> ++++++++++++++++++++------------
>>>>> 3 files changed, 59 insertions(+), 36 deletions(-)
>>>>
>>>> I've tried this series on my vim3l with the this driver compiled as a
>>>> module, and lost the Ethernet interface in the process, as the phy
>>>> wasn't able to resolve its interrupt and things fail later on:
>>>>
>>>> [ 72.238291] meson8b-dwmac ff3f0000.ethernet eth1: no phy at addr -1
>>>> [ 72.238917] meson8b-dwmac ff3f0000.ethernet eth1: stmmac_open:
>>>> Cannot attach to PHY (error: -19)
>>>>
>>>> This is a generic problem with making DT-based interrupt controllers
>>>> modular when not *all* the drivers can deal with probing deferral.
>>>
>>> Yes, but this series still keeps the default as built-in.
>>>
>>> If you build as a module, and you add `fw_devlink=on` to the kernel
>>> command-line, device-links will be created based on DT dependencies
>>> which will ensure the right module load order.
>>
>> It doesn't work here. I get the exact same error (well, with eth0
>> instead
>> of eth1). In my experience, fw_devlink isn't reliable yet. Config on
>> request.
>
> Other than CONFIG_MESON_IRQ_GPIO=m, are you using default upstream
> defconfig?
>
> I just double-checked with this series on top of v5.10-rc1, and I have
> eth0 working with interrupts without needing fw_devlink=on.
>
> With the default upstream defconfig all the networking for these devices
> is already configured as modules.
Forgot to include a full boot log:
U-Boot 2020.07-00031-gb35ed474d2b4 (Sep 14 2020 - 11:11:52 -0700) khadas-vim3l
Model: Khadas VIM3L
SoC: Amlogic Meson SM1 (Unknown) Revision 2b:c (4:2)
DRAM: 2 GiB
MMC: sd@ffe03000: 0, sd@ffe05000: 1, mmc@ffe07000: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@3000
Out: serial@3000
Err: serial@3000
Net: eth0: ethernet@ff3f0000
Verify GPT: success!
switch to partitions #0, OK
mmc2(part 0) is current device
MMC read: dev # 2, block # 1024, count 4096 ... 4096 blocks read: OK
Hit any key to stop autoboot: 2
# PYBOOT: u-boot: taking control.
0
=>
=> version
version
U-Boot 2020.07-00031-gb35ed474d2b4 (Sep 14 2020 - 11:11:52 -0700) khadas-vim3l
aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0
GNU ld (GNU Binutils for Debian) 2.31.1
=> setenv preboot
setenv preboot
=> setenv bootargs console=ttyAML0,115200
setenv bootargs console=ttyAML0,115200
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no
setenv autoload no
=> setenv autoboot no
setenv autoboot no
=> dhcp
dhcp
ethernet@ff3f0000 Waiting for PHY auto negotiation to complete.... done
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.0.143 (2 ms)
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x03000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz
tftp 0x03000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/Image.gz'.
Load address: 0x3000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#####################################################T ############
#################################################################
#################################################################
#################################################################
#################################################################
###############################
736.3 KiB/s
done
Bytes transferred = 10945439 (a7039f hex)
=> tftp 0x08000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz
tftp 0x08000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/initrd-SAzbRc.cpio.gz'.
Load address: 0x8000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################
1.3 MiB/s
done
Bytes transferred = 15588406 (eddc36 hex)
=> tftp 0x01000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb
tftp 0x01000000 192.168.1.2:tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb
Speed: 100, full duplex
Using ethernet@ff3f0000 device
TFTP from server 192.168.1.2; our IP address is 192.168.0.143; sending through gateway 192.168.0.254
Filename 'tmp/meson-sm1-khadas-vim3l-_Mngjr/tmpLRsLgg.dtb'.
Load address: 0x1000000
Loading: *####
937.5 KiB/s
done
Bytes transferred = 48988 (bf5c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttyAML0,115200
=> unzip 0x03000000 0x01080000
booti 0x01080000 - 0x01000000
# PYBOOT: u-boot: jumping to kernel image
unzip 0x03000000 0x01080000
Uncompressed size: 31179264 = 0x1DBC200
=> booti 0x01080000 - 0x01000000
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
Loading Device Tree to 0000000075f12000, end 0000000075f20f5b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[ 0.000000] Linux version 5.10.0-rc1-00002-g4b28e5bd6b6a (KernelCI@paris) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #232 SMP PREEMPT Mon Oct 26 10:18:47 PDT 2020
[ 0.000000] Machine model: Khadas VIM3L
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000065c00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007f806fff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7f3bd100-0x7f3befff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007f806fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x000000007f806fff]
[ 0.000000] Zeroed struct page in unavailable ranges: 505 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007f806fff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 23 pages/cpu s56152 r8192 d29864 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 513318
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: console=ttyAML0,115200
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB)
[ 0.000000] Memory: 1670932K/2085916K available (14076K kernel code, 2800K rwdata, 7572K rodata, 5952K init, 515K bss, 152840K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4d4 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000250] Console: colour dummy device 80x25
[ 0.000332] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000346] pid_max: default: 32768 minimum: 301
[ 0.000420] LSM: Security Framework initializing
[ 0.000477] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000492] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001786] rcu: Hierarchical SRCU implementation.
[ 0.005342] EFI services will not be available.
[ 0.005582] smp: Bringing up secondary CPUs ...
[ 0.006335] Detected VIPT I-cache on CPU1
[ 0.006396] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[ 0.007183] Detected VIPT I-cache on CPU2
[ 0.007225] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[ 0.007992] Detected VIPT I-cache on CPU3
[ 0.008031] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[ 0.008103] smp: Brought up 1 node, 4 CPUs
[ 0.008125] SMP: Total of 4 processors activated.
[ 0.008132] CPU features: detected: Privileged Access Never
[ 0.008137] CPU features: detected: LSE atomic instructions
[ 0.008142] CPU features: detected: User Access Override
[ 0.008147] CPU features: detected: 32-bit EL0 Support
[ 0.008153] CPU features: detected: Common not Private translations
[ 0.008158] CPU features: detected: RAS Extension Support
[ 0.008163] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.008168] CPU features: detected: CRC32 instructions
[ 0.008175] CPU features: detected: 32-bit EL1 Support
[ 0.023411] CPU: All CPU(s) started at EL2
[ 0.025215] devtmpfs: initialized
[ 0.033707] KASLR disabled due to lack of seed
[ 0.034072] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.034090] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.039946] pinctrl core: initialized pinctrl subsystem
[ 0.041395] DMI not present or invalid.
[ 0.041886] NET: Registered protocol family 16
[ 0.043203] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.043250] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.043361] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.043438] audit: initializing netlink subsys (disabled)
[ 0.043590] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.044851] thermal_sys: Registered thermal governor 'step_wise'
[ 0.044857] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.045189] cpuidle: using governor menu
[ 0.045345] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.045450] ASID allocator initialised with 65536 entries
[ 0.047163] Serial: AMBA PL011 UART driver
[ 0.094129] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.094144] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.094151] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.094158] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.095243] cryptd: max_cpu_qlen set to 1000
[ 0.097462] ACPI: Interpreter disabled.
[ 0.100245] VSYS_3V3: supplied by DC_IN
[ 0.101006] iommu: Default domain type: Translated
[ 0.101264] vgaarb: loaded
[ 0.101533] SCSI subsystem initialized
[ 0.101910] usbcore: registered new interface driver usbfs
[ 0.101950] usbcore: registered new interface driver hub
[ 0.102009] usbcore: registered new device driver usb
[ 0.102845] pps_core: LinuxPPS API ver. 1 registered
[ 0.102852] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.102868] PTP clock support registered
[ 0.103019] EDAC MC: Ver: 3.0.0
[ 0.104725] FPGA manager framework
[ 0.104818] Advanced Linux Sound Architecture Driver Initialized.
[ 0.105515] clocksource: Switched to clocksource arch_sys_counter
[ 0.105695] VFS: Disk quotas dquot_6.6.0
[ 0.105748] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.105920] pnp: PnP ACPI: disabled
[ 0.111989] NET: Registered protocol family 2
[ 0.112333] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.112363] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.112459] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.112624] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.112718] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.112754] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.112888] NET: Registered protocol family 1
[ 0.113295] RPC: Registered named UNIX socket transport module.
[ 0.113303] RPC: Registered udp transport module.
[ 0.113308] RPC: Registered tcp transport module.
[ 0.113313] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.113323] PCI: CLS 0 bytes, default 64
[ 0.113494] Unpacking initramfs...
[ 0.757051] Freeing initrd memory: 15220K
[ 0.757975] kvm [1]: IPA Size Limit: 40 bits
[ 0.758106] kvm [1]: vgic interrupt IRQ9
[ 0.758239] kvm [1]: VHE mode initialized successfully
[ 0.761737] Initialise system trusted keyrings
[ 0.761875] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 0.767592] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.768240] NFS: Registering the id_resolver key type
[ 0.768264] Key type id_resolver registered
[ 0.768270] Key type id_legacy registered
[ 0.768351] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.768499] 9p: Installing v9fs 9p2000 file system support
[ 0.804991] Key type asymmetric registered
[ 0.805000] Asymmetric key parser 'x509' registered
[ 0.805034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.805042] io scheduler mq-deadline registered
[ 0.805048] io scheduler kyber registered
[ 0.820372] EINJ: ACPI disabled.
[ 0.834593] soc soc0: Amlogic Meson SM1 (S905D3) Revision 2b:c (4:2) Detected
[ 0.843406] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.846185] SuperH (H)SCI(F) driver initialized
[ 0.846878] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart
[ 1.715908] printk: console [ttyAML0] enabled
[ 1.720868] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart
[ 1.729659] serial serial0: tty port ttyAML6 registered
[ 1.735155] msm_serial: driver initialized
[ 1.747269] loop: module loaded
[ 1.748427] megasas: 07.714.04.00-rc1
[ 1.753838] libphy: Fixed MDIO Bus: probed
[ 1.755098] tun: Universal TUN/TAP device driver, 1.6
[ 1.758461] thunder_xcv, ver 1.0
[ 1.760686] thunder_bgx, ver 1.0
[ 1.763896] nicpf, ver 1.0
[ 1.767908] hclge is initializing
[ 1.769859] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.776973] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.782295] e1000: Intel(R) PRO/1000 Network Driver
[ 1.787059] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.792790] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.797667] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.803570] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.808882] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.814431] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.820609] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.826947] sky2: driver version 1.30
[ 1.831453] VFIO - User Level meta-driver version: 0.3
[ 1.837540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.841657] ehci-pci: EHCI PCI platform driver
[ 1.846091] ehci-platform: EHCI generic platform driver
[ 1.851411] ehci-orion: EHCI orion driver
[ 1.855331] ehci-exynos: EHCI Exynos driver
[ 1.859453] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.865480] ohci-pci: OHCI PCI platform driver
[ 1.869894] ohci-platform: OHCI generic platform driver
[ 1.875179] ohci-exynos: OHCI Exynos driver
[ 1.879820] usbcore: registered new interface driver usb-storage
[ 1.888415] i2c /dev entries driver
[ 1.889925] VCC_3V3: supplied by VSYS_3V3
[ 1.892652] pca953x 0-0020: using no AI
[ 1.905395] sdhci: Secure Digital Host Controller Interface driver
[ 1.906001] sdhci: Copyright(c) Pierre Ossman
[ 1.911018] Synopsys Designware Multimedia Card Interface Driver
[ 1.917648] VDDIO_AO1V8: supplied by VSYS_3V3
[ 1.917794] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.917891] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 1.918956] EMMC_AO1V8: supplied by VCC_3V3
[ 1.919128] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[ 1.944551] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.947066] meson-sm: secure-monitor enabled
[ 1.951732] usbcore: registered new interface driver usbhid
[ 1.956145] usbhid: USB HID core driver
[ 1.969608] NET: Registered protocol family 17
[ 1.969774] 9pnet: Installing 9P2000 support
[ 1.972695] Key type dns_resolver registered
[ 1.977201] registered taskstats version 1
[ 1.980947] Loading compiled-in X.509 certificates
[ 2.000216] VCC_1V8: supplied by VCC_3V3
[ 2.000292] VCC_5V: supplied by DC_IN
[ 2.002727] USB_PWR: supplied by VCC_5V
[ 2.012712] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[ 2.012746] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[ 2.021504] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[ 2.024644] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[ 2.031863] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 2.040745] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.044095] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.051767] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[ 2.061004] xhci-hcd xhci-hcd.0.auto: irq 38, io mem 0xff500000
[ 2.067504] hub 1-0:1.0: USB hub found
[ 2.070555] hub 1-0:1.0: 2 ports detected
[ 2.074792] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.079939] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.087528] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.094033] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.102426] hub 2-0:1.0: USB hub found
[ 2.105742] hub 2-0:1.0: 1 port detected
[ 2.108013] mmc2: new HS200 MMC card at address 0001
[ 2.115194] mmcblk2: mmc2:0001 AJTD4R 14.6 GiB
[ 2.119317] mmcblk2boot0: mmc2:0001 AJTD4R partition 1 4.00 MiB
[ 2.123008] ALSA device list:
[ 2.125139] mmcblk2boot1: mmc2:0001 AJTD4R partition 2 4.00 MiB
[ 2.127825] No soundcards found.
[ 2.133841] mmcblk2rpmb: mmc2:0001 AJTD4R partition 3 4.00 MiB, chardev (234:0)
[ 2.139106] Freeing unused kernel memory: 5952K
[ 2.147508] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 2.161599] Run /init as init process
# PYBOOT: kernel: finished booting, starting userspace.
[ 2.216689] udevd[147]: starting version 3.2.9
[ 2.217441] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.222071] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.228339] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.239835] udevd[148]: starting eudev-3.2.9
[ 2.409604] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.413745] input: adc-keys as /devices/platform/adc-keys/input/input0
[ 2.581472] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[ 2.598429] panfrost ffe40000.gpu: clock rate = 24000000
[ 2.598539] panfrost ffe40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[ 2.606298] hub 1-1:1.0: USB hub found
[ 2.610299] hub 1-1:1.0: 4 ports detected
[ 2.625166] meson-gpio-intc ffd0f080.interrupt-controller: 100 to 8 gpio interrupt mux initialized
[ 2.630500] panfrost ffe40000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device
[ 2.666788] meson-vrtc ff8000a8.rtc: registered as rtc0
[ 2.666861] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[ 2.675628] panfrost ffe40000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
[ 2.683070] panfrost ffe40000.gpu: features: 00000000,3fde77ff, issues: 00000000,00000400
[ 2.690275] panfrost ffe40000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[ 2.701558] Registered IR keymap rc-khadas
[ 2.703102] panfrost ffe40000.gpu: shader_present=0x1 l2_present=0x1
[ 2.711210] VDDCPU: supplied by regulator-dummy
[ 2.719518] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[ 2.723383] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[ 2.729680] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[ 2.736803] meson8b-dwmac ff3f0000.ethernet: no reset control found
[ 2.745604] rc_core: Loaded IR protocol module ir-nec-decoder, but protocol nec still not available
[ 2.745634] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 2.749990] [drm] Initialized panfrost 1.1.0 20180908 for ffe40000.gpu on minor 0
[ 2.750670] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[ 2.757652] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
[ 2.757665] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[ 2.761805] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
[ 2.766764] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input1
[ 2.772832] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[ 2.772837] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[ 2.772839] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[ 2.772841] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[ 2.772919] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[ 2.778444] meson-ir ff808000.ir: receiver initialized
[ 2.785580] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[ 2.812678] meson-drm ff900000.vpu: CVBS Output connector not available
[ 2.818802] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.855700] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 2.856686] libphy: stmmac: probed
[ 2.869708] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 2.874474] libphy: mdio_mux: probed
[ 2.880010] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.888353] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.893796] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.895356] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 2.900810] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.906819] random: fast init done
[ 2.907668] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 1
[ 2.924169] libphy: mdio_mux: probed
[ 2.927005] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[ 2.929560] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[ 2.979412] Bluetooth: Core ver 2.22
[ 2.979529] NET: Registered protocol family 31
[ 2.983502] Bluetooth: HCI device and connection manager initialized
[ 2.988240] Bluetooth: HCI socket layer initialized
[ 2.993054] Bluetooth: L2CAP socket layer initialized
[ 2.998047] Bluetooth: SCO socket layer initialized
[ 3.008102] Bluetooth: HCI UART driver ver 2.3
[ 3.008132] Bluetooth: HCI UART protocol H4 registered
[ 3.012496] Bluetooth: HCI UART protocol LL registered
[ 3.018922] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 3.025093] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 3.032499] Bluetooth: HCI UART protocol Broadcom registered
[ 3.037844] Bluetooth: HCI UART protocol QCA registered
[ 3.056314] mmc0: new high speed SDIO card at address 0001
[ 3.066154] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.084925] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.085036] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.085040] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 3.095498] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9
[ 3.095673] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4359-sdio.bin failed with error -2
[ 3.095678] brcmfmac mmc0:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4359-sdio.bin
[ 3.152665] input: Logitech USB Receiver as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input2
[ 3.210334] hid-generic 0003:046D:C534.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0
[ 3.210422] Console: switching to colour frame buffer device 480x135
[ 3.217382] input: Logitech USB Receiver Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input3
[ 3.218050] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input4
[ 3.278033] input: Logitech USB Receiver System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input5
[ 3.279153] hid-generic 0003:046D:C534.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1
[ 3.394143] Bluetooth: hci0: BCM: chip id 121
[ 3.404246] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 3.416359] Bluetooth: hci0: BCM: features 0x0e
[ 3.499719] Bluetooth: hci0: BCM4359C0
[ 3.500759] Bluetooth: hci0: BCM4359C0 (003.001.006) build 0000
[ 3.520060] axg-sound-card sound: ASoC: no DMI vendor name!
[ 3.534874] urandom_read: 3 callbacks suppressed
[ 3.534881] random: dd: uninitialized urandom read (512 bytes read)
[ 3.577752] random: dropbear: uninitialized urandom read (32 bytes read)
[ 3.596038] NET: Registered protocol family 10
[ 3.596774] Segment Routing with IPv6
/bin/sh: can't access tty; job control turned off
/ #
# PYBOOT: userspace: at root shell
cat /proc/cmdline
cat /proc/cmdline
console=ttyAML0,115200
/ # uname -r
uname -r
5.10.0-rc1-00002-g4b28e5bd6b6a
/ # cat /proc/cpuinfo
cat /proc/cpuinfo
processor: 0
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 1
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 2
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
processor: 3
BogoMIPS: 48.00
Features: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer: 0x41
CPU architecture: 8
CPU variant: 0x1
CPU part: 0xd05
CPU revision: 0
/ # lsmod
lsmod
Module Size Used by Not tainted
ipv6 438272 18 [permanent]
snd_soc_hdmi_codec 16384 1
dw_hdmi_i2s_audio 16384 0
dw_hdmi_cec 16384 0
brcmfmac 245760 1
brcmutil 20480 1 brcmfmac
cfg80211 364544 2 brcmfmac
hci_uart 77824 0
btqca 16384 1 hci_uart
btbcm 24576 1 hci_uart
bluetooth 397312 4 hci_uart,btqca,btbcm
ecdh_generic 16384 1 bluetooth
snd_soc_meson_axg_frddr 36864 3
ecc 32768 1 ecdh_generic
rfkill 36864 2 cfg80211,bluetooth
meson_gxl 16384 0
snd_soc_meson_g12a_tohdmitx 20480 1
realtek 20480 0
snd_soc_meson_codec_glue 16384 1 snd_soc_meson_g12a_tohdmitx
meson_rng 16384 0
axg_audio 77824 13
dwmac_generic 16384 0
reset_meson_audio_arb 16384 3
snd_soc_meson_axg_fifo 16384 1 snd_soc_meson_axg_frddr
snd_soc_meson_axg_tdmout 24576 1
rng_core 24576 1 meson_rng
meson_dw_hdmi 20480 0
dw_hdmi 45056 2 dw_hdmi_i2s_audio,meson_dw_hdmi
sclk_div 16384 1 axg_audio
clk_phase 16384 1 axg_audio
mdio_mux_meson_g12a 16384 0
cec 57344 2 dw_hdmi_cec,dw_hdmi
dwmac_meson8b 16384 0
stmmac_platform 20480 2 dwmac_generic,dwmac_meson8b
pwm_meson 16384 2
stmmac 184320 3 dwmac_generic,dwmac_meson8b,stmmac_platform
rc_khadas 16384 0
meson_ir 16384 0
rc_core 40960 3 rc_khadas,meson_ir
rtc_meson_vrtc 16384 1
irq_meson_gpio 20480 0
pcs_xpcs 20480 1 stmmac
panfrost 61440 0
meson_drm 61440 1 meson_dw_hdmi
gpu_sched 32768 1 panfrost
meson_canvas 16384 1 meson_drm
drm_kms_helper 241664 5 meson_dw_hdmi,dw_hdmi,meson_drm
snd_soc_meson_axg_sound_card 16384 0
snd_soc_meson_card_utils 16384 1 snd_soc_meson_axg_sound_card
crct10dif_ce 20480 1
display_connector 16384 0
snd_soc_meson_axg_tdm_interface 16384 2 snd_soc_meson_axg_sound_card
drm 565248 8 meson_dw_hdmi,dw_hdmi,panfrost,meson_drm,gpu_sched,drm_kms_helper,display_connector
snd_soc_meson_axg_tdm_formatter 16384 2 snd_soc_meson_axg_tdmout,snd_soc_meson_axg_tdm_interface
nvmem_meson_efuse 16384 0
adc_keys 16384 0
/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 3a:62:88:b7:d1:2c brd ff:ff:ff:ff:ff:ff
/ # udhcpc
udhcpc: started, v1.31.1
[ 8.576234] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=39)
[ 8.589563] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[ 8.591492] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[ 8.598574] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
udhcpc: sending discover
[ 11.200356] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 11.203516] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
udhcpc: sending discover
udhcpc: sending select for 192.168.0.143
udhcpc: lease of 192.168.0.143 obtained, lease time 86400
deleting routers
adding dns 192.168.0.254
adding dns 192.168.0.254
next prev parent reply other threads:[~2020-10-26 17:33 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-20 7:25 [PATCH 0/2] irq-meson-gpio: make it possible to build as a module Neil Armstrong
2020-10-20 7:25 ` Neil Armstrong
2020-10-20 7:25 ` Neil Armstrong
2020-10-20 7:25 ` [PATCH 1/2] irqchip: " Neil Armstrong
2020-10-20 7:25 ` Neil Armstrong
2020-10-20 7:25 ` Neil Armstrong
2020-10-20 18:23 ` Kevin Hilman
2020-10-20 18:23 ` Kevin Hilman
2020-10-20 18:23 ` Kevin Hilman
[not found] ` <CAF2Aj3g6c8FEZb3e1by6sd8LpKLaeN5hsKrrQkZUvh8hosiW9A@mail.gmail.com>
2021-05-24 10:11 ` Marc Zyngier
2021-05-24 10:11 ` Marc Zyngier
2021-05-24 10:11 ` Marc Zyngier
2021-05-25 16:17 ` Kevin Hilman
2021-05-25 16:17 ` Kevin Hilman
2021-05-25 16:17 ` Kevin Hilman
2021-05-25 16:30 ` Lee Jones
2021-05-25 16:30 ` Lee Jones
2021-05-25 16:30 ` Lee Jones
2021-06-14 22:30 ` Kevin Hilman
2021-06-14 22:30 ` Kevin Hilman
2021-06-14 22:30 ` Kevin Hilman
2021-07-13 9:05 ` Lee Jones
2021-07-13 9:05 ` Lee Jones
2021-07-13 9:05 ` Lee Jones
2021-08-03 9:44 ` Marc Zyngier
2021-08-03 9:44 ` Marc Zyngier
2021-08-03 9:44 ` Marc Zyngier
2021-08-03 9:51 ` Marc Zyngier
2021-08-03 9:51 ` Marc Zyngier
2021-08-03 9:51 ` Marc Zyngier
2021-08-04 2:11 ` Saravana Kannan
2021-08-04 2:11 ` Saravana Kannan
2021-08-04 2:11 ` Saravana Kannan
2021-08-03 9:51 ` Neil Armstrong
2021-08-03 9:51 ` Neil Armstrong
2021-08-03 9:51 ` Neil Armstrong
2021-08-04 1:36 ` Saravana Kannan
2021-08-04 1:36 ` Saravana Kannan
2021-08-04 1:36 ` Saravana Kannan
2021-08-04 8:50 ` Marc Zyngier
2021-08-04 8:50 ` Marc Zyngier
2021-08-04 8:50 ` Marc Zyngier
2021-08-04 18:20 ` Saravana Kannan
2021-08-04 18:20 ` Saravana Kannan
2021-08-04 18:20 ` Saravana Kannan
2021-08-04 21:47 ` Saravana Kannan
2021-08-04 21:47 ` Saravana Kannan
2021-08-04 21:47 ` Saravana Kannan
2021-08-05 6:31 ` Neil Armstrong
2021-08-05 6:31 ` Neil Armstrong
2021-08-05 6:31 ` Neil Armstrong
2021-08-06 23:55 ` Saravana Kannan
2021-08-06 23:55 ` Saravana Kannan
2021-08-06 23:55 ` Saravana Kannan
2021-08-05 7:57 ` Lee Jones
2021-08-05 7:57 ` Lee Jones
2021-08-05 7:57 ` Lee Jones
2021-08-16 12:47 ` Lee Jones
2021-08-16 12:47 ` Lee Jones
2021-08-16 12:47 ` Lee Jones
2021-08-16 20:27 ` Saravana Kannan
2021-08-16 20:27 ` Saravana Kannan
2021-08-16 20:27 ` Saravana Kannan
2021-08-16 20:46 ` Andrew Lunn
2021-08-16 20:46 ` Andrew Lunn
2021-08-16 20:46 ` Andrew Lunn
2021-08-16 21:02 ` Saravana Kannan
2021-08-16 21:02 ` Saravana Kannan
2021-08-16 21:02 ` Saravana Kannan
2021-08-16 21:18 ` Andrew Lunn
2021-08-16 21:18 ` Andrew Lunn
2021-08-16 21:18 ` Andrew Lunn
2021-08-17 7:24 ` Lee Jones
2021-08-17 7:24 ` Lee Jones
2021-08-17 7:24 ` Lee Jones
2021-08-17 18:12 ` Saravana Kannan
2021-08-17 18:12 ` Saravana Kannan
2021-08-17 18:12 ` Saravana Kannan
2021-08-18 11:19 ` Marc Zyngier
2021-08-18 11:19 ` Marc Zyngier
2021-08-18 11:19 ` Marc Zyngier
2021-09-02 9:28 ` Neil Armstrong
2021-09-02 9:28 ` Neil Armstrong
2021-09-02 9:28 ` Neil Armstrong
2020-10-20 7:25 ` [PATCH 2/2] arm64: meson: remove MESON_IRQ_GPIO selection Neil Armstrong
2020-10-20 7:25 ` Neil Armstrong
2020-10-20 7:25 ` Neil Armstrong
2020-10-20 23:18 ` Kevin Hilman
2020-10-20 23:18 ` Kevin Hilman
2020-10-20 23:18 ` Kevin Hilman
2020-10-25 11:51 ` [PATCH 0/2] irq-meson-gpio: make it possible to build as a module Marc Zyngier
2020-10-25 11:51 ` Marc Zyngier
2020-10-25 11:51 ` Marc Zyngier
2020-10-26 16:18 ` Kevin Hilman
2020-10-26 16:18 ` Kevin Hilman
2020-10-26 16:18 ` Kevin Hilman
2020-10-26 17:00 ` Marc Zyngier
2020-10-26 17:00 ` Marc Zyngier
2020-10-26 17:00 ` Marc Zyngier
2020-10-26 17:28 ` Kevin Hilman
2020-10-26 17:28 ` Kevin Hilman
2020-10-26 17:28 ` Kevin Hilman
2020-10-26 17:33 ` Kevin Hilman [this message]
2020-10-26 17:33 ` Kevin Hilman
2020-10-26 17:33 ` Kevin Hilman
2020-10-26 18:30 ` Marc Zyngier
2020-10-26 18:30 ` Marc Zyngier
2020-10-26 18:30 ` Marc Zyngier
2020-10-26 23:45 ` Kevin Hilman
2020-10-26 23:45 ` Kevin Hilman
2020-10-26 23:45 ` Kevin Hilman
-- strict thread matches above, loose matches on Subject: below --
2021-09-02 13:49 Neil Armstrong
2021-09-02 13:49 ` Neil Armstrong
2021-09-02 13:49 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hv9ewhoyy.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.