From: khilman@baylibre.com (Kevin Hilman)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH] ARM64: dts: meson-axg: add RMII pins for ethernet controller
Date: Tue, 30 Jan 2018 16:00:06 -0800 [thread overview]
Message-ID: <7hvafic2yh.fsf@baylibre.com> (raw)
In-Reply-To: <593cbb66-7040-b27d-5109-702fb43dc18e@baylibre.com> (Neil Armstrong's message of "Thu, 11 Jan 2018 10:33:27 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 11/01/2018 10:11, Yixun Lan wrote:
>> Hi Jerome?
>>
>> On 01/11/18 16:37, Jerome Brunet wrote:
>>> On Thu, 2018-01-11 at 11:04 +0800, Yixun Lan wrote:
>>>> Comparing to RGMII interface, the RMII interface require few pins.
>>>> So it's worth describing them here.
>>>>
>>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>>>
>>> The only axg platform we have upstream is the s400 and is using rgmii.
>>> May I ask how this was tested ?
>>>
>> It's true that S400 using RGMII interface.
>>
>> but, we have customer using RTL8201FR-VB/VD which is a RMII PHY,
>>
>> This is actually tested with the 'eth_rmii_x_pins' group.
>>
>> Yixun
>>
>
> I pushed the same for GXBB,
>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Applied to v4.17/dt64 with Neil's ack.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM64: dts: meson-axg: add RMII pins for ethernet controller
Date: Tue, 30 Jan 2018 16:00:06 -0800 [thread overview]
Message-ID: <7hvafic2yh.fsf@baylibre.com> (raw)
In-Reply-To: <593cbb66-7040-b27d-5109-702fb43dc18e@baylibre.com> (Neil Armstrong's message of "Thu, 11 Jan 2018 10:33:27 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 11/01/2018 10:11, Yixun Lan wrote:
>> Hi Jerome?
>>
>> On 01/11/18 16:37, Jerome Brunet wrote:
>>> On Thu, 2018-01-11 at 11:04 +0800, Yixun Lan wrote:
>>>> Comparing to RGMII interface, the RMII interface require few pins.
>>>> So it's worth describing them here.
>>>>
>>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>>>
>>> The only axg platform we have upstream is the s400 and is using rgmii.
>>> May I ask how this was tested ?
>>>
>> It's true that S400 using RGMII interface.
>>
>> but, we have customer using RTL8201FR-VB/VD which is a RMII PHY,
>>
>> This is actually tested with the 'eth_rmii_x_pins' group.
>>
>> Yixun
>>
>
> I pushed the same for GXBB,
>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Applied to v4.17/dt64 with Neil's ack.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
To: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: Yixun Lan <yixun.lan-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org>,
Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] ARM64: dts: meson-axg: add RMII pins for ethernet controller
Date: Tue, 30 Jan 2018 16:00:06 -0800 [thread overview]
Message-ID: <7hvafic2yh.fsf@baylibre.com> (raw)
In-Reply-To: <593cbb66-7040-b27d-5109-702fb43dc18e-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> (Neil Armstrong's message of "Thu, 11 Jan 2018 10:33:27 +0100")
Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> writes:
> On 11/01/2018 10:11, Yixun Lan wrote:
>> Hi Jerome：
>>
>> On 01/11/18 16:37, Jerome Brunet wrote:
>>> On Thu, 2018-01-11 at 11:04 +0800, Yixun Lan wrote:
>>>> Comparing to RGMII interface, the RMII interface require few pins.
>>>> So it's worth describing them here.
>>>>
>>>> Signed-off-by: Yixun Lan <yixun.lan-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org>
>>>
>>> The only axg platform we have upstream is the s400 and is using rgmii.
>>> May I ask how this was tested ?
>>>
>> It's true that S400 using RGMII interface.
>>
>> but, we have customer using RTL8201FR-VB/VD which is a RMII PHY,
>>
>> This is actually tested with the 'eth_rmii_x_pins' group.
>>
>> Yixun
>>
>
> I pushed the same for GXBB,
>
> Acked-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Applied to v4.17/dt64 with Neil's ack.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Yixun Lan <yixun.lan@amlogic.com>,
Jerome Brunet <jbrunet@baylibre.com>,
devicetree@vger.kernel.org, Carlo Caione <carlo@caione.org>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM64: dts: meson-axg: add RMII pins for ethernet controller
Date: Tue, 30 Jan 2018 16:00:06 -0800 [thread overview]
Message-ID: <7hvafic2yh.fsf@baylibre.com> (raw)
In-Reply-To: <593cbb66-7040-b27d-5109-702fb43dc18e@baylibre.com> (Neil Armstrong's message of "Thu, 11 Jan 2018 10:33:27 +0100")
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 11/01/2018 10:11, Yixun Lan wrote:
>> Hi Jerome：
>>
>> On 01/11/18 16:37, Jerome Brunet wrote:
>>> On Thu, 2018-01-11 at 11:04 +0800, Yixun Lan wrote:
>>>> Comparing to RGMII interface, the RMII interface require few pins.
>>>> So it's worth describing them here.
>>>>
>>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>>>
>>> The only axg platform we have upstream is the s400 and is using rgmii.
>>> May I ask how this was tested ?
>>>
>> It's true that S400 using RGMII interface.
>>
>> but, we have customer using RTL8201FR-VB/VD which is a RMII PHY,
>>
>> This is actually tested with the 'eth_rmii_x_pins' group.
>>
>> Yixun
>>
>
> I pushed the same for GXBB,
>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Applied to v4.17/dt64 with Neil's ack.
Kevin
next prev parent reply other threads:[~2018-01-31 0:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-11 3:04 [PATCH] ARM64: dts: meson-axg: add RMII pins for ethernet controller Yixun Lan
2018-01-11 3:04 ` Yixun Lan
2018-01-11 3:04 ` Yixun Lan
2018-01-11 3:04 ` Yixun Lan
2018-01-11 8:37 ` Jerome Brunet
2018-01-11 8:37 ` Jerome Brunet
2018-01-11 8:37 ` Jerome Brunet
2018-01-11 9:11 ` Yixun Lan
2018-01-11 9:11 ` Yixun Lan
2018-01-11 9:11 ` Yixun Lan
2018-01-11 9:11 ` Yixun Lan
2018-01-11 9:33 ` Neil Armstrong
2018-01-11 9:33 ` Neil Armstrong
2018-01-11 9:33 ` Neil Armstrong
2018-01-11 9:33 ` Neil Armstrong
2018-01-31 0:00 ` Kevin Hilman [this message]
2018-01-31 0:00 ` Kevin Hilman
2018-01-31 0:00 ` Kevin Hilman
2018-01-31 0:00 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hvafic2yh.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.