From: Kevin Hilman <khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"jinkun.hong"
<jinkun.hong-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: Re: [RESEND PATCH v16 3/4] soc: rockchip: power-domain: Add power domain driver
Date: Tue, 25 Aug 2015 13:57:16 -0700 [thread overview]
Message-ID: <7hwpwjaxxv.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1440487486-6154-4-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org> (Caesar Wang's message of "Tue, 25 Aug 2015 15:24:45 +0800")
Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org> writes:
> This driver is found on RK3288 SoCs.
>
> In order to meet high performance and low power requirements, a power
> management unit is designed or saving power when RK3288 in low power
> mode.
> The RK3288 PMU is dedicated for managing the power of the whole chip.
>
> PMU can work in the Low Power Mode by setting bit[0] of PMU_PWRMODE_CON
> register. After setting the register, PMU would enter the Low Power mode.
> In the low power mode, pmu will auto power on/off the specified power
> domain, send idle req to specified power domain, shut down/up pll and
> so on. All of above are configurable by setting corresponding registers.
>
> Signed-off-by: jinkun.hong <jinkun.hong-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
[...]
> diff --git a/drivers/soc/rockchip/Kconfig b/drivers/soc/rockchip/Kconfig
> new file mode 100644
> index 0000000..87a09c3
> --- /dev/null
> +++ b/drivers/soc/rockchip/Kconfig
> @@ -0,0 +1,13 @@
> +#
> +# Rockchip Soc drivers
> +#
> +config PM_GENERIC_DOMAINS
Why are you (re)defining this config option? This name is already used in kernel/pm/Kconfig.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: khilman@kernel.org (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v16 3/4] soc: rockchip: power-domain: Add power domain driver
Date: Tue, 25 Aug 2015 13:57:16 -0700 [thread overview]
Message-ID: <7hwpwjaxxv.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1440487486-6154-4-git-send-email-wxt@rock-chips.com> (Caesar Wang's message of "Tue, 25 Aug 2015 15:24:45 +0800")
Caesar Wang <wxt@rock-chips.com> writes:
> This driver is found on RK3288 SoCs.
>
> In order to meet high performance and low power requirements, a power
> management unit is designed or saving power when RK3288 in low power
> mode.
> The RK3288 PMU is dedicated for managing the power of the whole chip.
>
> PMU can work in the Low Power Mode by setting bit[0] of PMU_PWRMODE_CON
> register. After setting the register, PMU would enter the Low Power mode.
> In the low power mode, pmu will auto power on/off the specified power
> domain, send idle req to specified power domain, shut down/up pll and
> so on. All of above are configurable by setting corresponding registers.
>
> Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
[...]
> diff --git a/drivers/soc/rockchip/Kconfig b/drivers/soc/rockchip/Kconfig
> new file mode 100644
> index 0000000..87a09c3
> --- /dev/null
> +++ b/drivers/soc/rockchip/Kconfig
> @@ -0,0 +1,13 @@
> +#
> +# Rockchip Soc drivers
> +#
> +config PM_GENERIC_DOMAINS
Why are you (re)defining this config option? This name is already used in kernel/pm/Kconfig.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@kernel.org>
To: Caesar Wang <wxt@rock-chips.com>
Cc: heiko@sntech.de, ulf.hansson@linaro.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, dianders@chromium.org,
tomasz.figa@gmail.com, dmitry.torokhov@gmail.com,
linux-kernel@vger.kernel.org, galak@codeaurora.org,
linux@arm.linux.org.uk, robh+dt@kernel.org, arnd@arndb.de,
linus.walleij@linaro.org, ijc+devicetree@hellion.org.uk,
devicetree@vger.kernel.org,
"jinkun.hong" <jinkun.hong@rock-chips.com>
Subject: Re: [RESEND PATCH v16 3/4] soc: rockchip: power-domain: Add power domain driver
Date: Tue, 25 Aug 2015 13:57:16 -0700 [thread overview]
Message-ID: <7hwpwjaxxv.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1440487486-6154-4-git-send-email-wxt@rock-chips.com> (Caesar Wang's message of "Tue, 25 Aug 2015 15:24:45 +0800")
Caesar Wang <wxt@rock-chips.com> writes:
> This driver is found on RK3288 SoCs.
>
> In order to meet high performance and low power requirements, a power
> management unit is designed or saving power when RK3288 in low power
> mode.
> The RK3288 PMU is dedicated for managing the power of the whole chip.
>
> PMU can work in the Low Power Mode by setting bit[0] of PMU_PWRMODE_CON
> register. After setting the register, PMU would enter the Low Power mode.
> In the low power mode, pmu will auto power on/off the specified power
> domain, send idle req to specified power domain, shut down/up pll and
> so on. All of above are configurable by setting corresponding registers.
>
> Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
[...]
> diff --git a/drivers/soc/rockchip/Kconfig b/drivers/soc/rockchip/Kconfig
> new file mode 100644
> index 0000000..87a09c3
> --- /dev/null
> +++ b/drivers/soc/rockchip/Kconfig
> @@ -0,0 +1,13 @@
> +#
> +# Rockchip Soc drivers
> +#
> +config PM_GENERIC_DOMAINS
Why are you (re)defining this config option? This name is already used in kernel/pm/Kconfig.
Kevin
next prev parent reply other threads:[~2015-08-25 20:57 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-25 7:24 [RESEND PATCH v16 0/4] ARM: rk3288: Add PM Domain support Caesar Wang
2015-08-25 7:24 ` Caesar Wang
2015-08-25 7:24 ` Caesar Wang
[not found] ` <1440487486-6154-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-08-25 7:24 ` [RESEND PATCH v16 1/4] dt-bindings: add document of Rockchip power domain Caesar Wang
2015-08-25 7:24 ` Caesar Wang
2015-08-25 7:24 ` Caesar Wang
2015-08-25 7:24 ` [RESEND PATCH v16 2/4] ARM: power-domain: rockchip: add all the domain type on RK3288 SoCs Caesar Wang
2015-08-25 7:24 ` Caesar Wang
2015-08-25 7:24 ` Caesar Wang
2015-08-25 7:24 ` [RESEND PATCH v16 3/4] soc: rockchip: power-domain: Add power domain driver Caesar Wang
2015-08-25 7:24 ` Caesar Wang
2015-08-25 7:24 ` Caesar Wang
[not found] ` <1440487486-6154-4-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-08-25 20:57 ` Kevin Hilman [this message]
2015-08-25 20:57 ` Kevin Hilman
2015-08-25 20:57 ` Kevin Hilman
2015-08-26 9:27 ` Caesar Wang
2015-08-26 9:27 ` Caesar Wang
2015-08-25 7:24 ` [RESEND PATCH v16 4/4] ARM: dts: add the support power-domain node on RK3288 SoCs Caesar Wang
2015-08-25 7:24 ` Caesar Wang
2015-08-25 7:24 ` Caesar Wang
2015-08-25 21:07 ` Kevin Hilman
2015-08-25 21:07 ` Kevin Hilman
[not found] ` <7hfv37axhj.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2015-08-25 21:48 ` Doug Anderson
2015-08-25 21:48 ` Doug Anderson
2015-08-25 21:48 ` Doug Anderson
[not found] ` <CAD=FV=V6oG+9U=W_JZmqCuNo-9-5wW8ffZzG7ZE_3cnSTNAjFQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-25 22:45 ` Kevin Hilman
2015-08-25 22:45 ` Kevin Hilman
2015-08-25 22:45 ` Kevin Hilman
[not found] ` <7htwrn6l7g.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2015-08-25 23:47 ` Dmitry Torokhov
2015-08-25 23:47 ` Dmitry Torokhov
2015-08-25 23:47 ` Dmitry Torokhov
[not found] ` <CAKdAkRS=9Dq+YpMNSjpij0Am4ZD6uUURv74OLLYf+akD=W885A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-28 0:24 ` Kevin Hilman
2015-08-28 0:24 ` Kevin Hilman
2015-08-28 0:24 ` Kevin Hilman
2015-08-28 2:03 ` Doug Anderson
2015-08-28 2:03 ` Doug Anderson
[not found] ` <CAD=FV=VTR-PBcXXX1jHNw65x_cMP9CKwVWBs+XCcFqFPp7msjA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-28 20:02 ` Michael Turquette
2015-08-28 20:02 ` Michael Turquette
2015-08-28 20:02 ` Michael Turquette
2015-08-28 21:08 ` Doug Anderson
2015-08-28 21:08 ` Doug Anderson
[not found] ` <CAD=FV=UrWauwX143MSZpus=L7N__jL1dU-FwaE8BU7wi=Lu2Qg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-28 22:53 ` Michael Turquette
2015-08-28 22:53 ` Michael Turquette
2015-08-28 22:53 ` Michael Turquette
2015-08-28 21:28 ` Kevin Hilman
2015-08-28 21:28 ` Kevin Hilman
2015-08-25 23:55 ` Doug Anderson
2015-08-25 23:55 ` Doug Anderson
2015-08-25 23:55 ` Doug Anderson
2015-08-26 9:24 ` Caesar Wang
2015-08-26 9:24 ` Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hwpwjaxxv.fsf@deeprootsystems.com \
--to=khilman-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=jinkun.hong-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.