Re: [PATCH] PCI: fixup __pci_read_base() after refactoring

[Kevin Hilman <khilman@linaro.org>]

Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:

> In commit 7ea945f0bb49 ("PCI: Shrink decoding-disabled window while
> sizing BARs"), Myron Stowe refactored the code of __pci_read_base() in
> order to reduce the amount of time spent with decoding disabled.
>
> However, contrary to what was said in the commit log, the commit does
> introduce some functional change: the pci_size() function that used to
> be called *before* the BAR size check is done is now called *after*
> the BAR size check is done.
>
> This causes some failures on certain platforms (namely ARM Marvell EBU
> platforms, equipped for example with a PCIe SATA card, or a PCIe USB3
> XHCI controller):
>
> pci 0000:03:00.0: reg 0x10: can't handle BAR larger than 4GB (size 0xfffffffffff00000)
>
> This problem didn't exist before this commit, due to pci_size() being
> called before doing the PCI BAR size check. Therefore, this commit
> fixes the problem by restoring the initial order of the operation, by
> calling pci_size() before doing the PCI BAR size check.
>

> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Fixes: 7ea945f0bb49 ("PCI: Shrink decoding-disabled window while sizing BARs")

I also boot tested this on armada-370-mirabox (multi_v7_defconfig and
mvebu_v7_defconfig) where I originally noticed the problem, and it's
booting fine again.

Tested-by: Kevin Hilman <khilman@linaro.org>

and, you forgot something:  ;)

Reported-by: Kevin Hilman <khilman@linaro.org>

Kevin