From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-amlogic@lists.infradead.org,
Christian Hewitt <christianshewitt@gmail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH v2] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
Date: Mon, 12 Aug 2019 13:31:21 -0700 [thread overview]
Message-ID: <7hzhke15ye.fsf@baylibre.com> (raw)
In-Reply-To: <20190812074857.8133-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
> Amlogic G12B SoC family, on a board with the same form factor as the
> VIM/VIM2 models. It ships in two variants; basic and
> pro which differ in RAM and eMMC size:
>
> - 2GB (basic) or 4GB (pro) LPDDR4 RAM
> - 16GB (basic) or 32GB (pro) eMMC 5.1 storage
> - 16MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
> - HDMI 2.1 video
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - IR receiver
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
>
> A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
> A311D SoCs supported by two variants of the board.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This still has a build-time dependency on the CPUB clock patch.
Looks like Jerome has sent a PR w/tag today that includes that, so I'll
merge that tag and then queue this patch.
Thanks,
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-amlogic@lists.infradead.org,
Christian Hewitt <christianshewitt@gmail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH v2] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
Date: Mon, 12 Aug 2019 13:31:21 -0700 [thread overview]
Message-ID: <7hzhke15ye.fsf@baylibre.com> (raw)
In-Reply-To: <20190812074857.8133-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
> Amlogic G12B SoC family, on a board with the same form factor as the
> VIM/VIM2 models. It ships in two variants; basic and
> pro which differ in RAM and eMMC size:
>
> - 2GB (basic) or 4GB (pro) LPDDR4 RAM
> - 16GB (basic) or 32GB (pro) eMMC 5.1 storage
> - 16MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
> - HDMI 2.1 video
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - IR receiver
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
>
> A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
> A311D SoCs supported by two variants of the board.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This still has a build-time dependency on the CPUB clock patch.
Looks like Jerome has sent a PR w/tag today that includes that, so I'll
merge that tag and then queue this patch.
Thanks,
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Christian Hewitt <christianshewitt@gmail.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH v2] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
Date: Mon, 12 Aug 2019 13:31:21 -0700 [thread overview]
Message-ID: <7hzhke15ye.fsf@baylibre.com> (raw)
In-Reply-To: <20190812074857.8133-1-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
> Amlogic G12B SoC family, on a board with the same form factor as the
> VIM/VIM2 models. It ships in two variants; basic and
> pro which differ in RAM and eMMC size:
>
> - 2GB (basic) or 4GB (pro) LPDDR4 RAM
> - 16GB (basic) or 32GB (pro) eMMC 5.1 storage
> - 16MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
> - HDMI 2.1 video
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - IR receiver
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
>
> A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
> A311D SoCs supported by two variants of the board.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This still has a build-time dependency on the CPUB clock patch.
Looks like Jerome has sent a PR w/tag today that includes that, so I'll
merge that tag and then queue this patch.
Thanks,
Kevin
next prev parent reply other threads:[~2019-08-12 20:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 7:48 [PATCH v2] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree Neil Armstrong
2019-08-12 7:48 ` Neil Armstrong
2019-08-12 7:48 ` Neil Armstrong
2019-08-12 20:31 ` Kevin Hilman [this message]
2019-08-12 20:31 ` Kevin Hilman
2019-08-12 20:31 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hzhke15ye.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=christianshewitt@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.