Re: [PATCH v3 11/11] usb: musb: sunxi: Introduce config struct

["Jernej Škrabec" <jernej.skrabec@gmail.com>]

Hi Andre!

Dne nedelja, 06. november 2022 ob 16:48:26 CET je Andre Przywara napisal(a):
> Currently the probe routine explicitly compares the compatible string of
> the device node to figure out which features and quirks a certain
> Allwinner MUSB model requires. This gets harder to maintain for new
> SoCs.
> 
> Add a struct sunxi_musb_cfg that names the features and quirks
> explicitly, and create instances of this struct for every type of MUSB
> device we support. Then bind this to the compatible strings via the OF
> data feature.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  drivers/usb/musb/sunxi.c | 101 +++++++++++++++++++++++++++++----------
>  1 file changed, 75 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
> index 4b368d16a73a..266f8baf5af0 100644
> --- a/drivers/usb/musb/sunxi.c
> +++ b/drivers/usb/musb/sunxi.c
> @@ -15,6 +15,7 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/phy/phy-sun4i-usb.h>
>  #include <linux/platform_device.h>
>  #include <linux/reset.h>
> @@ -67,6 +68,13 @@
>  #define SUNXI_MUSB_FL_NO_CONFIGDATA		7
>  #define SUNXI_MUSB_FL_PHY_MODE_PEND		8
> 
> +struct sunxi_musb_cfg {
> +	int nr_endpoints;
> +	bool has_sram;
> +	bool has_reset;
> +	bool no_configdata;
> +};
> +
>  /* Our read/write methods need access and do not get passed in a musb ref
> :| */ static struct musb *sunxi_musb;
> 
> @@ -625,7 +633,7 @@ static const struct musb_platform_ops sunxi_musb_ops = {
> #define SUNXI_MUSB_MAX_EP_NUM	6
>  #define SUNXI_MUSB_RAM_BITS	11
> 
> -static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = {
> +static struct musb_fifo_cfg sunxi_musb_mode_cfg_5eps[] = {
>  	MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
>  	MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
>  	MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
> @@ -641,7 +649,7 @@ static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = {
>  /* H3/V3s OTG supports only 4 endpoints */
>  #define SUNXI_MUSB_MAX_EP_NUM_H3	5
> 
> -static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] = {
> +static struct musb_fifo_cfg sunxi_musb_mode_cfg_4eps[] = {
>  	MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
>  	MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
>  	MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
> @@ -652,18 +660,18 @@ static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] =
> { MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512),
>  };
> 
> -static const struct musb_hdrc_config sunxi_musb_hdrc_config = {
> -	.fifo_cfg       = sunxi_musb_mode_cfg,
> -	.fifo_cfg_size  = ARRAY_SIZE(sunxi_musb_mode_cfg),
> +static const struct musb_hdrc_config sunxi_musb_hdrc_config_5eps = {
> +	.fifo_cfg       = sunxi_musb_mode_cfg_5eps,
> +	.fifo_cfg_size  = ARRAY_SIZE(sunxi_musb_mode_cfg_5eps),
>  	.multipoint	= true,
>  	.dyn_fifo	= true,
>  	.num_eps	= SUNXI_MUSB_MAX_EP_NUM,
>  	.ram_bits	= SUNXI_MUSB_RAM_BITS,
>  };
> 
> -static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = {
> -	.fifo_cfg       = sunxi_musb_mode_cfg_h3,
> -	.fifo_cfg_size  = ARRAY_SIZE(sunxi_musb_mode_cfg_h3),
> +static struct musb_hdrc_config sunxi_musb_hdrc_config_4eps = {

While at it, you can mark above struct as const. 5eps struct is already marked 
as const.

> +	.fifo_cfg       = sunxi_musb_mode_cfg_4eps,
> +	.fifo_cfg_size  = ARRAY_SIZE(sunxi_musb_mode_cfg_4eps),
>  	.multipoint	= true,
>  	.dyn_fifo	= true,
>  	.num_eps	= SUNXI_MUSB_MAX_EP_NUM_H3,
> @@ -677,6 +685,7 @@ static int sunxi_musb_probe(struct platform_device
> *pdev) struct platform_device_info	pinfo;
>  	struct sunxi_glue		*glue;
>  	struct device_node		*np = pdev->dev.of_node;
> +	const struct sunxi_musb_cfg	*cfg;
>  	int ret;
> 
>  	if (!np) {
> @@ -713,29 +722,35 @@ static int sunxi_musb_probe(struct platform_device
> *pdev) return -EINVAL;
>  	}
>  	pdata.platform_ops	= &sunxi_musb_ops;
> -	if (!of_device_is_compatible(np, "allwinner,sun8i-h3-musb"))
> -		pdata.config = &sunxi_musb_hdrc_config;
> -	else
> -		pdata.config = &sunxi_musb_hdrc_config_h3;
> +
> +	cfg = of_device_get_match_data(&pdev->dev);
> +	if (!cfg)
> +		return -EINVAL;
> +
> +	switch (cfg->nr_endpoints) {
> +	case 4:
> +		pdata.config = &sunxi_musb_hdrc_config_4eps;
> +		break;
> +	case 5:
> +		pdata.config = &sunxi_musb_hdrc_config_5eps;
> +		break;
> +	default:
> +		dev_err(&pdev->dev, "Only 4 or 5 endpoints 
supported\n");
> +		return -EINVAL;
> +	}

Overall nice cleanup! Only thing I would rather see different is to use pointer 
to struct musb_fifo_cfg directly in config struct. That way you avoid above 
switch case.

Best regards,
Jernej

> 
>  	glue->dev = &pdev->dev;
>  	INIT_WORK(&glue->work, sunxi_musb_work);
>  	glue->host_nb.notifier_call = sunxi_musb_host_notifier;
> 
> -	if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb") ||
> -	    of_device_is_compatible(np, "allwinner,suniv-f1c100s-musb")) {
> +	if (cfg->has_sram)
>  		set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags);
> -	}
> 
> -	if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb"))
> +	if (cfg->has_reset)
>  		set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
> 
> -	if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb") ||
> -	    of_device_is_compatible(np, "allwinner,sun8i-h3-musb") ||
> -	    of_device_is_compatible(np, "allwinner,suniv-f1c100s-musb")) {
> -		set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
> +	if (cfg->no_configdata)
>  		set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags);
> -	}
> 
>  	glue->clk = devm_clk_get(&pdev->dev, NULL);
>  	if (IS_ERR(glue->clk)) {
> @@ -813,12 +828,46 @@ static int sunxi_musb_remove(struct platform_device
> *pdev) return 0;
>  }
> 
> +static const struct sunxi_musb_cfg sun4i_a10_musb_cfg = {
> +	.nr_endpoints = 5,
> +	.has_sram = true,
> +};
> +
> +static const struct sunxi_musb_cfg sun6i_a31_musb_cfg = {
> +	.nr_endpoints = 5,
> +	.has_reset = true,
> +};
> +
> +static const struct sunxi_musb_cfg sun8i_a33_musb_cfg = {
> +	.nr_endpoints = 5,
> +	.has_reset = true,
> +	.no_configdata = true,
> +};
> +
> +static const struct sunxi_musb_cfg sun8i_h3_musb_cfg = {
> +	.nr_endpoints = 4,
> +	.has_reset = true,
> +	.no_configdata = true,
> +};
> +
> +static const struct sunxi_musb_cfg suniv_f1c100s_musb_cfg = {
> +	.nr_endpoints = 5,
> +	.has_sram = true,
> +	.has_reset = true,
> +	.no_configdata = true,
> +};
> +
>  static const struct of_device_id sunxi_musb_match[] = {
> -	{ .compatible = "allwinner,sun4i-a10-musb", },
> -	{ .compatible = "allwinner,sun6i-a31-musb", },
> -	{ .compatible = "allwinner,sun8i-a33-musb", },
> -	{ .compatible = "allwinner,sun8i-h3-musb", },
> -	{ .compatible = "allwinner,suniv-f1c100s-musb", },
> +	{ .compatible = "allwinner,sun4i-a10-musb",
> +	  .data = &sun4i_a10_musb_cfg, },
> +	{ .compatible = "allwinner,sun6i-a31-musb",
> +	  .data = &sun6i_a31_musb_cfg, },
> +	{ .compatible = "allwinner,sun8i-a33-musb",
> +	  .data = &sun8i_a33_musb_cfg, },
> +	{ .compatible = "allwinner,sun8i-h3-musb",
> +	  .data = &sun8i_h3_musb_cfg, },
> +	{ .compatible = "allwinner,suniv-f1c100s-musb",
> +	  .data = &suniv_f1c100s_musb_cfg, },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, sunxi_musb_match);
> --
> 2.35.5



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy