From: E Shattow <e@freeshell.de>
To: Yixun Lan <dlan@kernel.org>,
"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
"Martin K. Petersen" <mkp@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@sandisk.com>,
Bart Van Assche <bvanassche@acm.org>,
Bean Huo <beanhuo@micron.com>,
Stanley Jhu <stanleyjhu@google.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>
Cc: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>,
Aurelien Jarno <aurelien@aurel32.net>,
Jennifer Berringer <jberring@redhat.com>,
Trevor Gamblin <tgamblin@baylibre.com>,
linux-scsi@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v8 0/2] Add UFS Host driver support for SpacemiT K3 SoC
Date: Mon, 16 Nov 2026 17:15:08 -0800 [thread overview]
Message-ID: <8462a0d9-e9b7-467d-b2e1-7870c78e2691@freeshell.de> (raw)
In-Reply-To: <20261116-08-k3-ufs-support-v8-0-e3b256972dd4@kernel.org>
Hi Yixun,
On 11/15/26 19:46, Yixun Lan wrote:
> This series try to add UFS support for SpacemiT K3 SoC, the controller
> components consists of System Bus Interface Unit, UFS Host Controller
> Interface, UFS Transport Protocol Layer, UFS Host Registers, Device
> Management Entity (DME), Transport Layer, Network Layer, Data Link
> Layer, PHY Adapter Layer, and M-PHY Interface. A more detail functional
> block diagram can be found in SpacemiT website, chapter 9.7.3 [1]
>
> The DTS patch has been dropped in this series [2], and will send
> in separate series once this patch accepted. For people who want to
> test UFS driver, please grab the DT patch from version v5 [3].
>
> Enable UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND,
> This allows the device auto-bkops to be always enabled except
> during suspend (both runtime and suspend), with this feature,
> the BKOPS interrupt (log below) isn't reported anymore.
>
> [ 806.710763] ufshcd-spacemit c0e00000.ufshc: ufshcd_bkops_exception_event_handler: device raised urgent BKOPS exception for bkops status 1
>
> Link: https://spacemit.com/community/document/info?nodepath=hardware/key_stone/k3/k3_docs/k3_usermanual/09_memory_storage.md&lang=en [1]
> Link: https://lore.kernel.org/all/20260918-belligerent-succinct-kraken-7fa592@quoll/ [2]
> Link: https://lore.kernel.org/all/20260916-08-k3-ufs-support-v5-3-1f5d71f1027d@kernel.org/ [3]
> Signed-off-by: Yixun Lan <dlan@kernel.org>
> ---
> Changes in v8:
> - enable UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND
> - rename to "ref_clk", see explanation in patch
> - add delay between enable clk & deassert reset
> - respect bRefClkGatingWaitTime, add wait delay
> - drop comment of ufs_hba_spacemit_vops, which got CI complaint
> - rebase to v7.4-rc1
> - Link to v7: https://patch.msgid.link/20261002-08-k3-ufs-support-v7-0-bb39007ff9ae@kernel.org
>
> Changes in v7:
> - check err return value of ufs_spacemit_quirk_host_pa_saveconfigtime()
> - Link to v6: https://patch.msgid.link/20260921-08-k3-ufs-support-v6-0-3479768a2299@kernel.org
>
> Changes in v6:
> - drop unused macro and dev_req_params
> - use global PX_xx macros
> - fix axi clock name
> - drop dts patch
> - collect tags
> - Link to v5: https://patch.msgid.link/20260916-08-k3-ufs-support-v5-0-1f5d71f1027d@kernel.org
>
> Changes in v5:
> - adjust clock names
> - add runtime power support
> - collect tags
> - Link to v4: https://patch.msgid.link/20260908-08-k3-ufs-support-v4-0-22aa2bd97d3b@kernel.org
>
> Changes in v4:
> - fix clock and reset settings
> - drop function which retrieve value of tx_lanes
> - propagate return error of ufs_spacemit_dme_set()
> - check return value ufs_spacemit_check_hibern8()
> - drop call to ufshcd_vops_phy_initialization()
> - handle compiling warning if CONFIG_OF not enabled
> add __maybe_unused to ufs_spacemit_of_match
> - Link to v3: https://patch.msgid.link/20260806-08-k3-ufs-support-v3-0-037fb322acdb@kernel.org
>
> Changes in v3:
> - collect tags
> - fix dt-binding warning reported-by sashiko
> - fix low freq in opp-2 table
> - fix err checking in check_hibern8()
> - propagate err code in link_startup_notify()
> - update documents for event_notify()
> - ufs clock driver is merged into v7.3-rc1, update cover letter
> - Link to v2: https://patch.msgid.link/20260725-08-k3-ufs-support-v2-0-45036a2a2418@kernel.org
>
> Changes in v2:
> - fix missing interrupts property
> - move ufs node to k3-com260.dtsi
> - convert freq-table-hz to operating-points-v2
> - rework reset_control, fix header and drop global variable
> - drop dump_host_regs() debug interface
> - converge and refactor dme_set() operations
> - massive reduce of busy delay() loops
> - drop vendor specific hce_enable_notify(), fallback to default
> - drop unused member from struct ufs_spacemit_host
> - add COMPILE_TEST support to Kconfig
> - comment style fix
> - Link to v1: https://patch.msgid.link/20260702-08-k3-ufs-support-v1-0-1a64a3ab128f@kernel.org
>
> ---
> Yixun Lan (2):
> scsi: ufs: spacemit: dt-bindings: Add UFS controller for K3 SoC
> scsi: ufs: spacemit: k3: Add UFS Host Controller driver
>
> .../devicetree/bindings/ufs/spacemit,k3-ufshc.yaml | 56 ++
> drivers/ufs/host/Kconfig | 12 +
> drivers/ufs/host/Makefile | 1 +
> drivers/ufs/host/ufs-spacemit.c | 655 +++++++++++++++++++++
> drivers/ufs/host/ufs-spacemit.h | 77 +++
> 5 files changed, 801 insertions(+)
> ---
> base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
> change-id: 20260605-08-k3-ufs-support-c8b308e415e2
>
> Best regards,
> --
> Yixun Lan <dlan@kernel.org>
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Tested v7 and v8 successfully on Sipeed K3 Pico-ITX (32GiB DRAM / 128GiB
UFS model). Build and test methodology:
### build chimera debian-installer with patched mainline kernel
### assume fresh Debian testing "forky" build environment
apt update
apt install -y b4 bc bison ca-certificates cpio \
crossbuild-essential-riscv64 curl debhelper fakeroot flex kmod \
libdw-dev libssl-dev libssl-dev:riscv64 linux-config-7.2:riscv64 \
python3 rsync
curl -L \
https://git.kernel.org/torvalds/t/linux-7.4-rc3.tar.gz \
| tar xz
pushd linux-7.4-rc3
b4 am -v1 -o- \
https://lore.kernel.org/all/20261115195112.32120-1-e@freeshell.de/ \
| patch -p1
b4 am -v5 -P3 -o- \
https://lore.kernel.org/all/20260916-08-k3-ufs-support-v5-0-1f5d71f1027d@kernel.org/ \
| patch -p1
b4 am -v8 -P1,2 -o- \
https://lore.kernel.org/linux-riscv/20261116-08-k3-ufs-support-v8-0-e3b256972dd4@kernel.org/ \
| patch -p1
xzcat /usr/src/linux-config-7.2/config.riscv64_none_riscv64.xz \
> .config
scripts/config \
--module SCSI_UFS_SPACEMIT \
--module SCSI_UFSHCD_PLATFORM \
--module CONFIG_PHY_SPACEMIT_K3_COMBO_PHY \
--enable DEBUG_INFO_NONE \
--undefine CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
make ARCH=riscv olddefconfig
make ARCH=riscv KDEB_CHANGELOG_DIST=unreleased LOCALVERSION=-k3ufs \
-j$(nproc) bindeb-pkg
popd
curl -L \
https://d-i.debian.org/daily-images/riscv64/daily/netboot/netboot.tar.gz \
| tar xz ./debian-installer
fakeroot # enter fakeroot environment to preserve initrd permissions
gzip -dc debian-installer/riscv64/initrd.gz \
| cpio -id --directory=initrd
dpkg -x linux-image-*k3ufs*_riscv64.deb initrd/custom
gzip -dc initrd/custom/boot/vmlinuz-* \
> debian-installer/riscv64/linux-custom
mv initrd/lib/modules initrd/custom/
mv initrd/custom/lib/modules initrd/lib/
mv initrd/custom/usr/lib/* debian-installer/device-tree-custom
find initrd -path initrd/custom -prune -o -printf '%P\0' \
| cpio -0oH newc --directory=initrd \
| gzip -c > debian-installer/riscv64/initrd-custom.gz
exit # leave fakeroot environment
pushd debian-installer
tar -czf ../debian-installer-k3ufs.tar.gz \
--transform 's~^~debian-installer-k3ufs/~' \
device-tree-custom \
riscv64/linux-custom \
riscv64/initrd-custom.gz \
../linux-image-*k3ufs*_riscv64.deb
popd
### end (build chimera debian-installer with patched mainline kernel)
Then follow mainline U-Boot/OpenSBI build guide at:
https://lore.kernel.org/u-boot/20261029001555.1890775-1-e@freeshell.de/
with "python3 -m http.server 8000" to serve the files:
u-boot> env set autoload no
u-boot> dhcp
u-boot> wget $kernel_addr_r http://host:8000/riscv64/linux-custom
u-boot> wget $fdt_addr_r
http://host:8000/device-tree-custom/spacemit/k3-pico-itx.dtb
u-boot> wget $ramdisk_addr_r http://host:8000/riscv64/initrd-custom.gz
u-boot> env set bootargs 'console=ttyS0,115200 debug rootwait earlycon=sbi'
u-boot> bootefi $kernel_addr_r $ramdisk_addr_r:$filesize $fdt_addr_r
before the very last step of debian-installer to reboot, go to console
screen and use chroot to install the patched kernel to target and copy
out the necessary files
for i in /dev /dev/pts /proc /run /sys /tmp ; do mount -o bind $i
/target$i ; done
chroot /target sh -c 'scp
user@host:/path/to/debian-installer-k3ufs/linux-image-*k3ufs*.deb /tmp'
chroot /target sh -c 'dpkg -i /tmp/linux-image-*k3ufs*.deb'
chroot /target sh -c 'scp /boot/initrd.img-*k3ufs
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp /boot/vmlinuz-*k3ufs
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp
/lib/linux-image-*k3ufs/spacemit/k3-pico-itx.dtb
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp /boot/grub/grub.cfg
user@host:/path/to/installed-debiank3'
for i in /dev/pts /dev /proc /run /sys /tmp ; do umount /target$i ; done
... over network to some host later used to serve the bootloader these
files via "python -m http.server 8000"
u-boot> env set autoload no
u-boot> dhcp
u-boot> wget $kernel_addr_r http://host:8000/vmlinux-7.4.0-rc3-k3ufs
u-boot> wget $fdt_addr_r http://host:8000/k3-pico-itx.dtb
u-boot> wget $ramdisk_addr_r http://host:8000/initrd.img-7.4.0-rc3-k3ufs
u-boot> env set bootargs 'root=UUID=<place UUID here from grub.cfg> ro
quiet'
u-boot> bootefi $kernel_addr_r $ramdisk_addr_r:$filesize $fdt_addr_r
Workload for testing is to repeat the above build steps on-device from
UFS-backed root filesystem. In v7 there would be the occasional BKOPS
warnings, and v8 here now no such BKOPS warnings.
I do notice some UFS-related warnings and errors in dmesg:
journalctl --dmesg | grep ufshcd
ufshcd-spacemit c0e00000.ufshc: freq-table-hz property not specified
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vdd-hba-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vcc-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vccq-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vccq2-supply regulator, assuming enabled
scsi host0: ufshcd
ufshcd-spacemit c0e00000.ufshc: ufshcd_scsi_add_wlus: BOOT WLUN not found
ufshcd-spacemit c0e00000.ufshc: DL error event, INT errors:0x4,
DL_ERR:0x80000020
-E
WARNING: multiple messages have this Message-ID (diff)
From: E Shattow <e@freeshell.de>
To: Yixun Lan <dlan@kernel.org>,
"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
"Martin K. Petersen" <mkp@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@sandisk.com>,
Bart Van Assche <bvanassche@acm.org>,
Bean Huo <beanhuo@micron.com>,
Stanley Jhu <stanleyjhu@google.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>
Cc: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>,
Aurelien Jarno <aurelien@aurel32.net>,
Jennifer Berringer <jberring@redhat.com>,
Trevor Gamblin <tgamblin@baylibre.com>,
linux-scsi@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v8 0/2] Add UFS Host driver support for SpacemiT K3 SoC
Date: Mon, 16 Nov 2026 17:15:08 -0800 [thread overview]
Message-ID: <8462a0d9-e9b7-467d-b2e1-7870c78e2691@freeshell.de> (raw)
In-Reply-To: <20261116-08-k3-ufs-support-v8-0-e3b256972dd4@kernel.org>
Hi Yixun,
On 11/15/26 19:46, Yixun Lan wrote:
> This series try to add UFS support for SpacemiT K3 SoC, the controller
> components consists of System Bus Interface Unit, UFS Host Controller
> Interface, UFS Transport Protocol Layer, UFS Host Registers, Device
> Management Entity (DME), Transport Layer, Network Layer, Data Link
> Layer, PHY Adapter Layer, and M-PHY Interface. A more detail functional
> block diagram can be found in SpacemiT website, chapter 9.7.3 [1]
>
> The DTS patch has been dropped in this series [2], and will send
> in separate series once this patch accepted. For people who want to
> test UFS driver, please grab the DT patch from version v5 [3].
>
> Enable UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND,
> This allows the device auto-bkops to be always enabled except
> during suspend (both runtime and suspend), with this feature,
> the BKOPS interrupt (log below) isn't reported anymore.
>
> [ 806.710763] ufshcd-spacemit c0e00000.ufshc: ufshcd_bkops_exception_event_handler: device raised urgent BKOPS exception for bkops status 1
>
> Link: https://spacemit.com/community/document/info?nodepath=hardware/key_stone/k3/k3_docs/k3_usermanual/09_memory_storage.md&lang=en [1]
> Link: https://lore.kernel.org/all/20260918-belligerent-succinct-kraken-7fa592@quoll/ [2]
> Link: https://lore.kernel.org/all/20260916-08-k3-ufs-support-v5-3-1f5d71f1027d@kernel.org/ [3]
> Signed-off-by: Yixun Lan <dlan@kernel.org>
> ---
> Changes in v8:
> - enable UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND
> - rename to "ref_clk", see explanation in patch
> - add delay between enable clk & deassert reset
> - respect bRefClkGatingWaitTime, add wait delay
> - drop comment of ufs_hba_spacemit_vops, which got CI complaint
> - rebase to v7.4-rc1
> - Link to v7: https://patch.msgid.link/20261002-08-k3-ufs-support-v7-0-bb39007ff9ae@kernel.org
>
> Changes in v7:
> - check err return value of ufs_spacemit_quirk_host_pa_saveconfigtime()
> - Link to v6: https://patch.msgid.link/20260921-08-k3-ufs-support-v6-0-3479768a2299@kernel.org
>
> Changes in v6:
> - drop unused macro and dev_req_params
> - use global PX_xx macros
> - fix axi clock name
> - drop dts patch
> - collect tags
> - Link to v5: https://patch.msgid.link/20260916-08-k3-ufs-support-v5-0-1f5d71f1027d@kernel.org
>
> Changes in v5:
> - adjust clock names
> - add runtime power support
> - collect tags
> - Link to v4: https://patch.msgid.link/20260908-08-k3-ufs-support-v4-0-22aa2bd97d3b@kernel.org
>
> Changes in v4:
> - fix clock and reset settings
> - drop function which retrieve value of tx_lanes
> - propagate return error of ufs_spacemit_dme_set()
> - check return value ufs_spacemit_check_hibern8()
> - drop call to ufshcd_vops_phy_initialization()
> - handle compiling warning if CONFIG_OF not enabled
> add __maybe_unused to ufs_spacemit_of_match
> - Link to v3: https://patch.msgid.link/20260806-08-k3-ufs-support-v3-0-037fb322acdb@kernel.org
>
> Changes in v3:
> - collect tags
> - fix dt-binding warning reported-by sashiko
> - fix low freq in opp-2 table
> - fix err checking in check_hibern8()
> - propagate err code in link_startup_notify()
> - update documents for event_notify()
> - ufs clock driver is merged into v7.3-rc1, update cover letter
> - Link to v2: https://patch.msgid.link/20260725-08-k3-ufs-support-v2-0-45036a2a2418@kernel.org
>
> Changes in v2:
> - fix missing interrupts property
> - move ufs node to k3-com260.dtsi
> - convert freq-table-hz to operating-points-v2
> - rework reset_control, fix header and drop global variable
> - drop dump_host_regs() debug interface
> - converge and refactor dme_set() operations
> - massive reduce of busy delay() loops
> - drop vendor specific hce_enable_notify(), fallback to default
> - drop unused member from struct ufs_spacemit_host
> - add COMPILE_TEST support to Kconfig
> - comment style fix
> - Link to v1: https://patch.msgid.link/20260702-08-k3-ufs-support-v1-0-1a64a3ab128f@kernel.org
>
> ---
> Yixun Lan (2):
> scsi: ufs: spacemit: dt-bindings: Add UFS controller for K3 SoC
> scsi: ufs: spacemit: k3: Add UFS Host Controller driver
>
> .../devicetree/bindings/ufs/spacemit,k3-ufshc.yaml | 56 ++
> drivers/ufs/host/Kconfig | 12 +
> drivers/ufs/host/Makefile | 1 +
> drivers/ufs/host/ufs-spacemit.c | 655 +++++++++++++++++++++
> drivers/ufs/host/ufs-spacemit.h | 77 +++
> 5 files changed, 801 insertions(+)
> ---
> base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
> change-id: 20260605-08-k3-ufs-support-c8b308e415e2
>
> Best regards,
> --
> Yixun Lan <dlan@kernel.org>
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Tested v7 and v8 successfully on Sipeed K3 Pico-ITX (32GiB DRAM / 128GiB
UFS model). Build and test methodology:
### build chimera debian-installer with patched mainline kernel
### assume fresh Debian testing "forky" build environment
apt update
apt install -y b4 bc bison ca-certificates cpio \
crossbuild-essential-riscv64 curl debhelper fakeroot flex kmod \
libdw-dev libssl-dev libssl-dev:riscv64 linux-config-7.2:riscv64 \
python3 rsync
curl -L \
https://git.kernel.org/torvalds/t/linux-7.4-rc3.tar.gz \
| tar xz
pushd linux-7.4-rc3
b4 am -v1 -o- \
https://lore.kernel.org/all/20261115195112.32120-1-e@freeshell.de/ \
| patch -p1
b4 am -v5 -P3 -o- \
https://lore.kernel.org/all/20260916-08-k3-ufs-support-v5-0-1f5d71f1027d@kernel.org/ \
| patch -p1
b4 am -v8 -P1,2 -o- \
https://lore.kernel.org/linux-riscv/20261116-08-k3-ufs-support-v8-0-e3b256972dd4@kernel.org/ \
| patch -p1
xzcat /usr/src/linux-config-7.2/config.riscv64_none_riscv64.xz \
> .config
scripts/config \
--module SCSI_UFS_SPACEMIT \
--module SCSI_UFSHCD_PLATFORM \
--module CONFIG_PHY_SPACEMIT_K3_COMBO_PHY \
--enable DEBUG_INFO_NONE \
--undefine CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
make ARCH=riscv olddefconfig
make ARCH=riscv KDEB_CHANGELOG_DIST=unreleased LOCALVERSION=-k3ufs \
-j$(nproc) bindeb-pkg
popd
curl -L \
https://d-i.debian.org/daily-images/riscv64/daily/netboot/netboot.tar.gz \
| tar xz ./debian-installer
fakeroot # enter fakeroot environment to preserve initrd permissions
gzip -dc debian-installer/riscv64/initrd.gz \
| cpio -id --directory=initrd
dpkg -x linux-image-*k3ufs*_riscv64.deb initrd/custom
gzip -dc initrd/custom/boot/vmlinuz-* \
> debian-installer/riscv64/linux-custom
mv initrd/lib/modules initrd/custom/
mv initrd/custom/lib/modules initrd/lib/
mv initrd/custom/usr/lib/* debian-installer/device-tree-custom
find initrd -path initrd/custom -prune -o -printf '%P\0' \
| cpio -0oH newc --directory=initrd \
| gzip -c > debian-installer/riscv64/initrd-custom.gz
exit # leave fakeroot environment
pushd debian-installer
tar -czf ../debian-installer-k3ufs.tar.gz \
--transform 's~^~debian-installer-k3ufs/~' \
device-tree-custom \
riscv64/linux-custom \
riscv64/initrd-custom.gz \
../linux-image-*k3ufs*_riscv64.deb
popd
### end (build chimera debian-installer with patched mainline kernel)
Then follow mainline U-Boot/OpenSBI build guide at:
https://lore.kernel.org/u-boot/20261029001555.1890775-1-e@freeshell.de/
with "python3 -m http.server 8000" to serve the files:
u-boot> env set autoload no
u-boot> dhcp
u-boot> wget $kernel_addr_r http://host:8000/riscv64/linux-custom
u-boot> wget $fdt_addr_r
http://host:8000/device-tree-custom/spacemit/k3-pico-itx.dtb
u-boot> wget $ramdisk_addr_r http://host:8000/riscv64/initrd-custom.gz
u-boot> env set bootargs 'console=ttyS0,115200 debug rootwait earlycon=sbi'
u-boot> bootefi $kernel_addr_r $ramdisk_addr_r:$filesize $fdt_addr_r
before the very last step of debian-installer to reboot, go to console
screen and use chroot to install the patched kernel to target and copy
out the necessary files
for i in /dev /dev/pts /proc /run /sys /tmp ; do mount -o bind $i
/target$i ; done
chroot /target sh -c 'scp
user@host:/path/to/debian-installer-k3ufs/linux-image-*k3ufs*.deb /tmp'
chroot /target sh -c 'dpkg -i /tmp/linux-image-*k3ufs*.deb'
chroot /target sh -c 'scp /boot/initrd.img-*k3ufs
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp /boot/vmlinuz-*k3ufs
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp
/lib/linux-image-*k3ufs/spacemit/k3-pico-itx.dtb
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp /boot/grub/grub.cfg
user@host:/path/to/installed-debiank3'
for i in /dev/pts /dev /proc /run /sys /tmp ; do umount /target$i ; done
... over network to some host later used to serve the bootloader these
files via "python -m http.server 8000"
u-boot> env set autoload no
u-boot> dhcp
u-boot> wget $kernel_addr_r http://host:8000/vmlinux-7.4.0-rc3-k3ufs
u-boot> wget $fdt_addr_r http://host:8000/k3-pico-itx.dtb
u-boot> wget $ramdisk_addr_r http://host:8000/initrd.img-7.4.0-rc3-k3ufs
u-boot> env set bootargs 'root=UUID=<place UUID here from grub.cfg> ro
quiet'
u-boot> bootefi $kernel_addr_r $ramdisk_addr_r:$filesize $fdt_addr_r
Workload for testing is to repeat the above build steps on-device from
UFS-backed root filesystem. In v7 there would be the occasional BKOPS
warnings, and v8 here now no such BKOPS warnings.
I do notice some UFS-related warnings and errors in dmesg:
journalctl --dmesg | grep ufshcd
ufshcd-spacemit c0e00000.ufshc: freq-table-hz property not specified
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vdd-hba-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vcc-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vccq-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vccq2-supply regulator, assuming enabled
scsi host0: ufshcd
ufshcd-spacemit c0e00000.ufshc: ufshcd_scsi_add_wlus: BOOT WLUN not found
ufshcd-spacemit c0e00000.ufshc: DL error event, INT errors:0x4,
DL_ERR:0x80000020
-E
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2026-11-17 1:16 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 3:46 [PATCH v8 0/2] Add UFS Host driver support for SpacemiT K3 SoC Yixun Lan
2026-11-16 3:46 ` Yixun Lan
2026-11-16 3:46 ` [PATCH v8 1/2] scsi: ufs: spacemit: dt-bindings: Add UFS controller for " Yixun Lan
2026-11-16 3:46 ` Yixun Lan
2026-11-16 3:46 ` [PATCH v8 2/2] scsi: ufs: spacemit: k3: Add UFS Host Controller driver Yixun Lan
2026-11-16 3:46 ` Yixun Lan
2026-11-16 4:16 ` sashiko-bot
2026-11-17 19:44 ` Aurelien Jarno
2026-11-17 19:44 ` Aurelien Jarno
2026-11-17 1:15 ` E Shattow [this message]
2026-11-17 1:15 ` [PATCH v8 0/2] Add UFS Host driver support for SpacemiT K3 SoC E Shattow
2026-11-17 3:17 ` Yixun Lan
2026-11-17 3:17 ` Yixun Lan
2026-11-17 19:44 ` Aurelien Jarno
2026-11-17 19:44 ` Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8462a0d9-e9b7-467d-b2e1-7870c78e2691@freeshell.de \
--to=e@freeshell.de \
--cc=James.Bottomley@HansenPartnership.com \
--cc=alex@ghiti.fr \
--cc=alim.akhtar@samsung.com \
--cc=aou@eecs.berkeley.edu \
--cc=asrinivasan@oss.tenstorrent.com \
--cc=aurelien@aurel32.net \
--cc=avri.altman@sandisk.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@kernel.org \
--cc=jberring@redhat.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mkp@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=robh@kernel.org \
--cc=spacemit@lists.linux.dev \
--cc=stanleyjhu@google.com \
--cc=tgamblin@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.