Re: 43p-140 install issues

[Mike Martin <sydneymartin@gmail.com>]

Now I'm very confused .... on my next reboot ... the network wouldn't
work. After much trial and error, I got the current unstable d-i image
to work. It did it all right up to the reboot (where is warns you that
it doesn't have a boot loader installed).

Now what!

I have an installed system, but I can't figure out how to boot it! I
have /boot/vmlinux on /dev/sdb1 and a root on /dev/sdb1. How do I
write a boot sector or tell OpenFirmware to boot from this file? I
tried to netboot and set root=/dev/sdb1 - but without the scsi modules
loaded it fails to read the drives and panics.

I think I neet to create a type 41 PReP boot partition and get the
kernel onto it. I've found this thread:
http://lists.gnu.org/archive/html/bug-parted/2002-09/msg00016.html

and this:
http://www.yellowdoglinux.com/support/solutions/champion_server/rs6k.shtml

I tried booting up with the installer, going to a shell after the scsi
was active and the installed system was mounted. I used sfdisk from
/target/sbin to create a 10 Meg type 41 partition on the first HD
(/dev/sdb0 eventually). I used dd to copy /target/boot/vmlinux to this
partition. But it still won't boot.

I'm very close. If I can get the system to boot (really it needs to
boot itself - not netboot) I'd call this a success.

Thanks!
MikeM




On Sat, 1 Jan 2005 20:15:13 -0500, Mike Martin <sydneymartin@gmail.com> wrote:
> I can boot with this image:
> http://debian.yorku.ca/debian/dists/testing/main/installer-powerpc/current/images/powerpc/netboot/vmlinuz-prep.initrd
> 
> And things seems to go very well. Network configures, hard drives
> partition, it dies at "Install the base system"  with "The debootstrap
> program exited with an error (return value 255)." It instructs me to
> check /var/log/messages which now contains: "execv: No such file or
> directory"
> 
> The previous step, partitioning, added:
>   "No matching physical volumes found
>   No volume groups found
>   Reading all physical volumes.  This may take a while..."
> 
> Anyone?
> 
> MikeMartin
> 
> On Sat, 1 Jan 2005 17:57:58 +0100, Sven Luther <sven.luther@wanadoo.fr> wrote:
> > On Sat, Jan 01, 2005 at 05:30:25PM +0100, Ulrich Teichert wrote:
> > > Hi,
> > >
> > > [del]
> > > >I would prefer that we fix the debian kernels for them to work correctly
> > > >though. More on this on monday.
> > >
> > > I failed to configure a stock 2.4.28 kernel to detect the SCSI controler.
> > > I think some of Leigh patches for this must be applied, but I haven't
> > > gone any further.
> >
> > I had some report on a power3 box, that only the SMP sym53c8xx driver worked.
> > When configuring in UP mode,
> >
> > > [del]
> > > >Do the debian 2.4.27 kernel work on it ? I was unable to boot the 2.4.27 d-i
> > > >kernel on my powerstack, but this is a different machine, so the issues may be
> > > >a bit different.
> > >
> > > I've only tried the Woody PREP kernel, which failed in a way which I can't
> > > remember, but I'll give it a try.
> >
> > Yes, please, i would greatly appreciate it, preferably the 2.6.8 kernel too.
> > Let' try to get this fixed before the sarge release, which is not so far off
> > now.
> >
> > Friendly,
> >
> > Sven Luther
> >
> >
>