From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Subject: Re: [Intel-gfx] [PATCH 15/22] drm/i915/audio: Precompute the ELD
Date: Wed, 12 Oct 2022 18:11:20 +0300 [thread overview]
Message-ID: <871qrdulev.fsf@intel.com> (raw)
In-Reply-To: <20221011170011.17198-16-ville.syrjala@linux.intel.com>
On Tue, 11 Oct 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Stash the ELD into the crtc_state and precompute it. This gets
> rid of the ugly ELD mutation during intel_audio_codec_enable(),
> and opens the door for the state checker.
Should note the functional change of disabling audio up front if ELD is
bogus.
>
> Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
> Cc: Takashi Iwai <tiwai@suse.de>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
I observe that I'm confused by DP MST audio and how it ties into this.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_audio.c | 53 +++++++++++--------
> drivers/gpu/drm/i915/display/intel_audio.h | 5 ++
> .../drm/i915/display/intel_display_types.h | 2 +
> drivers/gpu/drm/i915/display/intel_dp.c | 4 +-
> drivers/gpu/drm/i915/display/intel_hdmi.c | 4 +-
> 5 files changed, 45 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c
> index 4eb5589a0f89..39291e870635 100644
> --- a/drivers/gpu/drm/i915/display/intel_audio.c
> +++ b/drivers/gpu/drm/i915/display/intel_audio.c
> @@ -334,8 +334,7 @@ static void g4x_audio_codec_enable(struct intel_encoder *encoder,
> {
> struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> - struct drm_connector *connector = conn_state->connector;
> - const u32 *eld = (const u32 *)connector->eld;
> + const u32 *eld = (const u32 *)crtc_state->eld;
> int eld_buffer_size, len, i;
>
> intel_crtc_wait_for_next_vblank(crtc);
> @@ -344,7 +343,7 @@ static void g4x_audio_codec_enable(struct intel_encoder *encoder,
> G4X_ELD_VALID | G4X_ELD_ADDRESS_MASK, 0);
>
> eld_buffer_size = g4x_eld_buffer_size(i915);
> - len = min(drm_eld_size(connector->eld) / 4, eld_buffer_size);
> + len = min(drm_eld_size(crtc_state->eld) / 4, eld_buffer_size);
>
> for (i = 0; i < len; i++)
> intel_de_write(i915, G4X_HDMIW_HDMIEDID, eld[i]);
> @@ -616,9 +615,8 @@ static void hsw_audio_codec_enable(struct intel_encoder *encoder,
> {
> struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> - struct drm_connector *connector = conn_state->connector;
> enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> - const u32 *eld = (const u32 *)connector->eld;
> + const u32 *eld = (const u32 *)crtc_state->eld;
> int eld_buffer_size, len, i;
>
> mutex_lock(&i915->display.audio.mutex);
> @@ -642,7 +640,7 @@ static void hsw_audio_codec_enable(struct intel_encoder *encoder,
> IBX_ELD_ADDRESS_MASK, 0);
>
> eld_buffer_size = hsw_eld_buffer_size(i915, cpu_transcoder);
> - len = min(drm_eld_size(connector->eld) / 4, eld_buffer_size);
> + len = min(drm_eld_size(crtc_state->eld) / 4, eld_buffer_size);
>
> for (i = 0; i < len; i++)
> intel_de_write(i915, HSW_AUD_EDID_DATA(cpu_transcoder), eld[i]);
> @@ -744,8 +742,7 @@ static void ilk_audio_codec_enable(struct intel_encoder *encoder,
> {
> struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> - struct drm_connector *connector = conn_state->connector;
> - const u32 *eld = (const u32 *)connector->eld;
> + const u32 *eld = (const u32 *)crtc_state->eld;
> enum port port = encoder->port;
> enum pipe pipe = crtc->pipe;
> int eld_buffer_size, len, i;
> @@ -769,7 +766,7 @@ static void ilk_audio_codec_enable(struct intel_encoder *encoder,
> IBX_ELD_ADDRESS_MASK, 0);
>
> eld_buffer_size = ilk_eld_buffer_size(i915, pipe);
> - len = min(drm_eld_size(connector->eld) / 4, eld_buffer_size);
> + len = min(drm_eld_size(crtc_state->eld) / 4, eld_buffer_size);
>
> for (i = 0; i < len; i++)
> intel_de_write(i915, regs.hdmiw_hdmiedid, eld[i]);
> @@ -795,6 +792,30 @@ static void ilk_audio_codec_enable(struct intel_encoder *encoder,
> mutex_unlock(&i915->display.audio.mutex);
> }
>
> +bool intel_audio_compute_config(struct intel_encoder *encoder,
> + struct intel_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state)
> +{
> + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> + struct drm_connector *connector = conn_state->connector;
> + const struct drm_display_mode *adjusted_mode =
> + &crtc_state->hw.adjusted_mode;
> +
> + if (!connector->eld[0]) {
> + drm_dbg_kms(&i915->drm,
> + "Bogus ELD on [CONNECTOR:%d:%s]\n",
> + connector->base.id, connector->name);
> + return false;
> + }
> +
> + BUILD_BUG_ON(sizeof(crtc_state->eld) != sizeof(connector->eld));
> + memcpy(crtc_state->eld, connector->eld, sizeof(crtc_state->eld));
> +
> + crtc_state->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
> +
> + return true;
> +}
> +
> /**
> * intel_audio_codec_enable - Enable the audio codec for HD audio
> * @encoder: encoder on which to enable audio
> @@ -812,8 +833,6 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
> struct i915_audio_component *acomp = i915->display.audio.component;
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> struct drm_connector *connector = conn_state->connector;
> - const struct drm_display_mode *adjusted_mode =
> - &crtc_state->hw.adjusted_mode;
> enum port port = encoder->port;
> enum pipe pipe = crtc->pipe;
>
> @@ -823,15 +842,7 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
> drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s][ENCODER:%d:%s] Enable audio codec on pipe %c, %u bytes ELD\n",
> connector->base.id, connector->name,
> encoder->base.base.id, encoder->base.name,
> - pipe_name(pipe), drm_eld_size(connector->eld));
> -
> - /* FIXME precompute the ELD in .compute_config() */
> - if (!connector->eld[0])
> - drm_dbg_kms(&i915->drm,
> - "Bogus ELD on [CONNECTOR:%d:%s]\n",
> - connector->base.id, connector->name);
> -
> - connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
> + pipe_name(pipe), drm_eld_size(crtc_state->eld));
>
> if (i915->display.funcs.audio)
> i915->display.funcs.audio->audio_codec_enable(encoder,
> @@ -854,7 +865,7 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
> (int) port, (int) pipe);
> }
>
> - intel_lpe_audio_notify(i915, pipe, port, connector->eld,
> + intel_lpe_audio_notify(i915, pipe, port, crtc_state->eld,
> crtc_state->port_clock,
> intel_crtc_has_dp_encoder(crtc_state));
> }
> diff --git a/drivers/gpu/drm/i915/display/intel_audio.h b/drivers/gpu/drm/i915/display/intel_audio.h
> index 63b22131dc45..b9070f336bcf 100644
> --- a/drivers/gpu/drm/i915/display/intel_audio.h
> +++ b/drivers/gpu/drm/i915/display/intel_audio.h
> @@ -6,12 +6,17 @@
> #ifndef __INTEL_AUDIO_H__
> #define __INTEL_AUDIO_H__
>
> +#include <linux/types.h>
> +
> struct drm_connector_state;
> struct drm_i915_private;
> struct intel_crtc_state;
> struct intel_encoder;
>
> void intel_audio_hooks_init(struct drm_i915_private *dev_priv);
> +bool intel_audio_compute_config(struct intel_encoder *encoder,
> + struct intel_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state);
> void intel_audio_codec_enable(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index e2b853e9e51d..f378bcaf0f65 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1248,6 +1248,8 @@ struct intel_crtc_state {
> struct drm_dp_vsc_sdp vsc;
> } infoframes;
>
> + u8 eld[MAX_ELD_BYTES];
> +
> /* HDMI scrambling status */
> bool hdmi_scrambling;
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a060903891b2..d6c88f14d31d 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2023,7 +2023,9 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && encoder->port != PORT_A)
> pipe_config->has_pch_encoder = true;
>
> - pipe_config->has_audio = intel_dp_has_audio(encoder, pipe_config, conn_state);
> + pipe_config->has_audio =
> + intel_dp_has_audio(encoder, pipe_config, conn_state) &&
> + intel_audio_compute_config(encoder, pipe_config, conn_state);
>
> fixed_mode = intel_panel_fixed_mode(connector, adjusted_mode);
> if (intel_dp_is_edp(intel_dp) && fixed_mode) {
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 93519fb23d9d..d10998801228 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -43,6 +43,7 @@
> #include "i915_debugfs.h"
> #include "i915_drv.h"
> #include "intel_atomic.h"
> +#include "intel_audio.h"
> #include "intel_connector.h"
> #include "intel_ddi.h"
> #include "intel_de.h"
> @@ -2261,7 +2262,8 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
> pipe_config->has_pch_encoder = true;
>
> pipe_config->has_audio =
> - intel_hdmi_has_audio(encoder, pipe_config, conn_state);
> + intel_hdmi_has_audio(encoder, pipe_config, conn_state) &&
> + intel_audio_compute_config(encoder, pipe_config, conn_state);
>
> /*
> * Try to respect downstream TMDS clock limits first, if
--
Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2022-10-12 15:11 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 16:59 [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Ville Syrjala
2022-10-11 16:59 ` [Intel-gfx] [PATCH 01/22] drm/i915/audio: s/dev_priv/i915/ Ville Syrjala
2022-10-12 14:35 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 02/22] drm/i915/audio: Nuke leftover ROUNDING_FACTOR Ville Syrjala
2022-10-12 14:36 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 03/22] drm/i915/audio: Remove CL/BLC audio stuff Ville Syrjala
2022-10-12 14:36 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 04/22] drm/i915/audio: Exract struct ilk_audio_regs Ville Syrjala
2022-10-12 14:36 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 05/22] drm/i915/audio: Use REG_BIT() & co Ville Syrjala
2022-10-12 14:37 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 06/22] drm/i915/audio: Unify register bit naming Ville Syrjala
2022-10-12 14:37 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 07/22] drm/i915/audio: Protect singleton register with a lock Ville Syrjala
2022-10-12 14:38 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 08/22] drm/i915/audio: Nuke intel_eld_uptodate() Ville Syrjala
2022-10-12 14:40 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 09/22] drm/i915/audio: Read ELD buffer size from hardware Ville Syrjala
2022-10-12 14:41 ` Jani Nikula
2022-10-12 14:46 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 10/22] drm/i915/audio: Make sure we write the whole ELD buffer Ville Syrjala
2022-10-12 14:28 ` Jani Nikula
2022-10-12 15:03 ` Ville Syrjälä
2022-10-12 16:06 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 11/22] drm/i915/audio: Use u32* for ELD Ville Syrjala
2022-10-12 14:42 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 12/22] drm/i915/audio: Use intel_de_rmw() for most audio registers Ville Syrjala
2022-10-11 21:00 ` kernel test robot
2022-10-11 23:05 ` kernel test robot
2022-10-12 14:33 ` Jani Nikula
2022-10-12 15:05 ` Ville Syrjälä
2022-10-11 17:00 ` [Intel-gfx] [PATCH 13/22] drm/i915/audio: Split "ELD valid" vs. audio PD on hsw+ Ville Syrjala
2022-10-12 15:01 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 14/22] drm/i915/audio: Do the vblank waits Ville Syrjala
2022-10-12 15:01 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 15/22] drm/i915/audio: Precompute the ELD Ville Syrjala
2022-10-12 15:11 ` Jani Nikula [this message]
2022-10-11 17:00 ` [Intel-gfx] [PATCH 16/22] drm/i915/audio: Hardware ELD readout Ville Syrjala
2022-10-12 15:19 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 17/22] drm/i915/sdvo: Extract intel_sdvo_has_audio() Ville Syrjala
2022-10-12 15:15 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 18/22] drm/i915/sdvo: Precompute the ELD Ville Syrjala
2022-10-12 15:16 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 19/22] drm/i915/sdvo: Do ELD hardware readout Ville Syrjala
2022-10-12 15:22 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 20/22] drm/i915/audio: Hook up ELD into the state checker Ville Syrjala
2022-10-12 15:25 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 21/22] drm/i915/audio: Include ELD in the state dump Ville Syrjala
2022-10-12 15:26 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 22/22] hax: drm/i915/audio: Make HSW hardware ELD buffer sort of work Ville Syrjala
2022-10-12 10:49 ` [Intel-gfx] [PATCH v2 22/22] drm/i915/audio: Resume HSW/BDW HDA controller around ELD access Ville Syrjala
2022-10-12 11:08 ` Ville Syrjälä
2022-10-12 11:42 ` Kai Vehmanen
2022-10-12 13:53 ` Kai Vehmanen
2022-10-12 14:24 ` Ville Syrjälä
2022-10-19 18:06 ` Ville Syrjälä
2022-10-14 10:51 ` Kai Vehmanen
2022-10-19 18:43 ` Ville Syrjälä
2022-10-11 17:39 ` [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Jani Nikula
2022-10-11 20:38 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2022-10-11 20:38 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-10-11 21:00 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-10-12 12:33 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: ELD precompute and readout (rev2) Patchwork
2022-10-12 12:33 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-10-12 12:58 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-10-14 9:03 ` [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Borah, Chaitanya Kumar
2022-10-14 9:13 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871qrdulev.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tiwai@suse.de \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.