From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: Vaibhav Jain <vaibhav@linux.ibm.com>,
nvdimm@lists.linux.dev, linuxppc-dev@lists.ozlabs.org
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>,
Dan Williams <dan.j.williams@intel.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Ira Weiny <ira.weiny@intel.com>,
Shivaprasad G Bhat <sbhat@linux.ibm.com>
Subject: Re: [PATCH v3] powerpc/papr_scm: Implement initial support for injecting smart errors
Date: Mon, 17 Jan 2022 14:00:42 +0530 [thread overview]
Message-ID: <871r167oi5.fsf@linux.ibm.com> (raw)
In-Reply-To: <20220113120252.1145671-1-vaibhav@linux.ibm.com>
Vaibhav Jain <vaibhav@linux.ibm.com> writes:
> Presently PAPR doesn't support injecting smart errors on an
> NVDIMM. This makes testing the NVDIMM health reporting functionality
> difficult as simulating NVDIMM health related events need a hacked up
> qemu version.
>
> To solve this problem this patch proposes simulating certain set of
> NVDIMM health related events in papr_scm. Specifically 'fatal' health
> state and 'dirty' shutdown state. These error can be injected via the
> user-space 'ndctl-inject-smart(1)' command. With the proposed patch and
> corresponding ndctl patches following command flow is expected:
>
> $ sudo ndctl list -DH -d nmem0
> ...
> "health_state":"ok",
> "shutdown_state":"clean",
> ...
> # inject unsafe shutdown and fatal health error
> $ sudo ndctl inject-smart nmem0 -Uf
> ...
> "health_state":"fatal",
> "shutdown_state":"dirty",
> ...
> # uninject all errors
> $ sudo ndctl inject-smart nmem0 -N
> ...
> "health_state":"ok",
> "shutdown_state":"clean",
> ...
>
> The patch adds two members 'health_bitmap_mask' and
> 'health_bitmap_override' inside struct papr_scm_priv which are then
> bit blt'ed to the health bitmaps fetched from the hypervisor. In case
> we are not able to fetch health information from the hypervisor we
> service the health bitmap from these two members. These members are
> accessible from sysfs at nmemX/papr/health_bitmap_override
>
> A new PDSM named 'SMART_INJECT' is proposed that accepts newly
> introduced 'struct nd_papr_pdsm_smart_inject' as payload thats
> exchanged between libndctl and papr_scm to indicate the requested
> smart-error states.
>
> When the processing the PDSM 'SMART_INJECT', papr_pdsm_smart_inject()
> constructs a pair or 'mask' and 'override' bitmaps from the payload
> and bit-blt it to the 'health_bitmap_{mask, override}' members. This
> ensures the after being fetched from the hypervisor, the health_bitmap
> reflects requested smart-error states.
>
> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
> ---
> Changelog:
>
> Since v2:
> * Rebased the patch to ppc-next
> * Added documentation for newly introduced sysfs attribute 'health_bitmap_override'
>
> Since v1:
> * Updated the patch description.
> * Removed dependency of a header movement patch.
> * Removed '__packed' attribute for 'struct nd_papr_pdsm_smart_inject' [Aneesh]
> ---
> Documentation/ABI/testing/sysfs-bus-papr-pmem | 13 +++
> arch/powerpc/include/uapi/asm/papr_pdsm.h | 18 ++++
> arch/powerpc/platforms/pseries/papr_scm.c | 94 ++++++++++++++++++-
> 3 files changed, 122 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
> index 95254cec92bf..8a0b2a7f7671 100644
> --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem
> +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem
> @@ -61,3 +61,16 @@ Description:
> * "CchRHCnt" : Cache Read Hit Count
> * "CchWHCnt" : Cache Write Hit Count
> * "FastWCnt" : Fast Write Count
> +
> +What: /sys/bus/nd/devices/nmemX/papr/health_bitmap_override
> +Date: Jan, 2022
> +KernelVersion: v5.17
> +Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, nvdimm@lists.linux.dev,
> +Description:
> + (RO) Reports the health bitmap override/mask bitmaps that are
> + applied to top bitmap received from PowerVM via the H_SCM_HEALTH
> + Hcall. Together these can be used to forcibly set/reset specific
> + bits returned from Hcall. These bitmaps are presently used to
> + simulate various health or shutdown states for an nvdimm and are
> + set by user-space tools like ndctl by issuing a PAPR DSM.
> +
> diff --git a/arch/powerpc/include/uapi/asm/papr_pdsm.h b/arch/powerpc/include/uapi/asm/papr_pdsm.h
> index 82488b1e7276..17439925045c 100644
> --- a/arch/powerpc/include/uapi/asm/papr_pdsm.h
> +++ b/arch/powerpc/include/uapi/asm/papr_pdsm.h
> @@ -116,6 +116,22 @@ struct nd_papr_pdsm_health {
> };
> };
>
> +/* Flags for injecting specific smart errors */
> +#define PDSM_SMART_INJECT_HEALTH_FATAL (1 << 0)
> +#define PDSM_SMART_INJECT_BAD_SHUTDOWN (1 << 1)
> +
> +struct nd_papr_pdsm_smart_inject {
> + union {
> + struct {
> + /* One or more of PDSM_SMART_INJECT_ */
> + __u32 flags;
> + __u8 fatal_enable;
> + __u8 unsafe_shutdown_enable;
> + };
> + __u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE];
> + };
> +};
> +
> /*
> * Methods to be embedded in ND_CMD_CALL request. These are sent to the kernel
> * via 'nd_cmd_pkg.nd_command' member of the ioctl struct
> @@ -123,12 +139,14 @@ struct nd_papr_pdsm_health {
> enum papr_pdsm {
> PAPR_PDSM_MIN = 0x0,
> PAPR_PDSM_HEALTH,
> + PAPR_PDSM_SMART_INJECT,
> PAPR_PDSM_MAX,
> };
>
> /* Maximal union that can hold all possible payload types */
> union nd_pdsm_payload {
> struct nd_papr_pdsm_health health;
> + struct nd_papr_pdsm_smart_inject smart_inject;
> __u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE];
> } __packed;
>
> diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
> index f48e87ac89c9..de4cf329cfb3 100644
> --- a/arch/powerpc/platforms/pseries/papr_scm.c
> +++ b/arch/powerpc/platforms/pseries/papr_scm.c
> @@ -68,6 +68,10 @@
> #define PAPR_SCM_PERF_STATS_EYECATCHER __stringify(SCMSTATS)
> #define PAPR_SCM_PERF_STATS_VERSION 0x1
>
> +/* Use bitblt method to override specific bits in the '_bitmap_' */
> +#define BITBLT_BITMAP(_bitmap_, _mask_, _override_) \
> + (((_bitmap_) & ~(_mask_)) | ((_mask_) & (_override_)))
> +
> /* Struct holding a single performance metric */
> struct papr_scm_perf_stat {
> u8 stat_id[8];
> @@ -120,6 +124,12 @@ struct papr_scm_priv {
>
> /* length of the stat buffer as expected by phyp */
> size_t stat_buffer_len;
> +
> + /* The bits which needs to be overridden */
> + u64 health_bitmap_mask;
> +
> + /* The overridden values for the bits having the masks set */
> + u64 health_bitmap_override;
> };
>
> static int papr_scm_pmem_flush(struct nd_region *nd_region,
> @@ -347,19 +357,28 @@ static ssize_t drc_pmem_query_stats(struct papr_scm_priv *p,
> static int __drc_pmem_query_health(struct papr_scm_priv *p)
> {
> unsigned long ret[PLPAR_HCALL_BUFSIZE];
> + u64 bitmap = 0;
> long rc;
>
> /* issue the hcall */
> rc = plpar_hcall(H_SCM_HEALTH, ret, p->drc_index);
> - if (rc != H_SUCCESS) {
> + if (rc == H_SUCCESS)
> + bitmap = ret[0] & ret[1];
> + else if (rc == H_FUNCTION)
> + dev_info_once(&p->pdev->dev,
> + "Hcall H_SCM_HEALTH not implemented, assuming empty health bitmap");
> + else {
> +
> dev_err(&p->pdev->dev,
> "Failed to query health information, Err:%ld\n", rc);
> return -ENXIO;
> }
>
> p->lasthealth_jiffies = jiffies;
> - p->health_bitmap = ret[0] & ret[1];
> -
> + /* Allow overriding specific health bits via bit blt. */
> + bitmap = BITBLT_BITMAP(bitmap, p->health_bitmap_mask,
> + p->health_bitmap_override);
> + WRITE_ONCE(p->health_bitmap, bitmap);
Why WRITE_ONCE ?
> dev_dbg(&p->pdev->dev,
> "Queried dimm health info. Bitmap:0x%016lx Mask:0x%016lx\n",
> ret[0], ret[1]);
> @@ -669,6 +688,54 @@ static int papr_pdsm_health(struct papr_scm_priv *p,
> return rc;
> }
>
> +/* Inject a smart error Add the dirty-shutdown-counter value to the pdsm */
> +static int papr_pdsm_smart_inject(struct papr_scm_priv *p,
> + union nd_pdsm_payload *payload)
> +{
> + int rc;
> + u32 supported_flags = 0;
> + u64 mask = 0, override = 0;
> +
> + /* Check for individual smart error flags and update mask and override */
> + if (payload->smart_inject.flags & PDSM_SMART_INJECT_HEALTH_FATAL) {
> + supported_flags |= PDSM_SMART_INJECT_HEALTH_FATAL;
> + mask |= PAPR_PMEM_HEALTH_FATAL;
> + override |= payload->smart_inject.fatal_enable ?
> + PAPR_PMEM_HEALTH_FATAL : 0;
> + }
> +
> + if (payload->smart_inject.flags & PDSM_SMART_INJECT_BAD_SHUTDOWN) {
> + supported_flags |= PDSM_SMART_INJECT_BAD_SHUTDOWN;
> + mask |= PAPR_PMEM_SHUTDOWN_DIRTY;
> + override |= payload->smart_inject.unsafe_shutdown_enable ?
> + PAPR_PMEM_SHUTDOWN_DIRTY : 0;
> + }
> +
> + dev_dbg(&p->pdev->dev, "[Smart-inject] Mask=%#llx override=%#llx\n",
> + mask, override);
> +
> + /* Prevent concurrent access to dimm health bitmap related members */
> + rc = mutex_lock_interruptible(&p->health_mutex);
> + if (rc)
> + return rc;
> +
> + /* Bitblt mask/override to corrosponding health_bitmap couterparts */
> + p->health_bitmap_mask = BITBLT_BITMAP(p->health_bitmap_mask,
> + mask, override);
is that correct? Should we do that mask & override ? Shouldn't this be
p->health_bitmap_mask = BITBLT_BITMAP(p->health_bitmap_mask,
mask, ~0x0UL);
> + p->health_bitmap_override = BITBLT_BITMAP(p->health_bitmap_override,
> + mask, override);
> +
> + /* Invalidate cached health bitmap */
> + p->lasthealth_jiffies = 0;
> +
> + mutex_unlock(&p->health_mutex);
> +
> + /* Return the supported flags back to userspace */
> + payload->smart_inject.flags = supported_flags;
> +
> + return sizeof(struct nd_papr_pdsm_health);
> +}
> +
> /*
> * 'struct pdsm_cmd_desc'
> * Identifies supported PDSMs' expected length of in/out payloads
> @@ -702,6 +769,12 @@ static const struct pdsm_cmd_desc __pdsm_cmd_descriptors[] = {
> .size_out = sizeof(struct nd_papr_pdsm_health),
> .service = papr_pdsm_health,
> },
> +
> + [PAPR_PDSM_SMART_INJECT] = {
> + .size_in = sizeof(struct nd_papr_pdsm_smart_inject),
> + .size_out = sizeof(struct nd_papr_pdsm_smart_inject),
> + .service = papr_pdsm_smart_inject,
> + },
> /* Empty */
> [PAPR_PDSM_MAX] = {
> .size_in = 0,
> @@ -838,6 +911,20 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
> return 0;
> }
>
> +static ssize_t health_bitmap_override_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct nvdimm *dimm = to_nvdimm(dev);
> + struct papr_scm_priv *p = nvdimm_provider_data(dimm);
> +
> + return sprintf(buf, "mask=%#llx override=%#llx\n",
> + READ_ONCE(p->health_bitmap_mask),
> + READ_ONCE(p->health_bitmap_override));
> +}
> +
> +static DEVICE_ATTR_ADMIN_RO(health_bitmap_override);
> +
> static ssize_t perf_stats_show(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -952,6 +1039,7 @@ static struct attribute *papr_nd_attributes[] = {
> &dev_attr_flags.attr,
> &dev_attr_perf_stats.attr,
> &dev_attr_dirty_shutdown.attr,
> + &dev_attr_health_bitmap_override.attr,
> NULL,
> };
>
> --
> 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: Vaibhav Jain <vaibhav@linux.ibm.com>,
nvdimm@lists.linux.dev, linuxppc-dev@lists.ozlabs.org
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>,
Dan Williams <dan.j.williams@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Shivaprasad G Bhat <sbhat@linux.ibm.com>
Subject: Re: [PATCH v3] powerpc/papr_scm: Implement initial support for injecting smart errors
Date: Mon, 17 Jan 2022 14:00:42 +0530 [thread overview]
Message-ID: <871r167oi5.fsf@linux.ibm.com> (raw)
In-Reply-To: <20220113120252.1145671-1-vaibhav@linux.ibm.com>
Vaibhav Jain <vaibhav@linux.ibm.com> writes:
> Presently PAPR doesn't support injecting smart errors on an
> NVDIMM. This makes testing the NVDIMM health reporting functionality
> difficult as simulating NVDIMM health related events need a hacked up
> qemu version.
>
> To solve this problem this patch proposes simulating certain set of
> NVDIMM health related events in papr_scm. Specifically 'fatal' health
> state and 'dirty' shutdown state. These error can be injected via the
> user-space 'ndctl-inject-smart(1)' command. With the proposed patch and
> corresponding ndctl patches following command flow is expected:
>
> $ sudo ndctl list -DH -d nmem0
> ...
> "health_state":"ok",
> "shutdown_state":"clean",
> ...
> # inject unsafe shutdown and fatal health error
> $ sudo ndctl inject-smart nmem0 -Uf
> ...
> "health_state":"fatal",
> "shutdown_state":"dirty",
> ...
> # uninject all errors
> $ sudo ndctl inject-smart nmem0 -N
> ...
> "health_state":"ok",
> "shutdown_state":"clean",
> ...
>
> The patch adds two members 'health_bitmap_mask' and
> 'health_bitmap_override' inside struct papr_scm_priv which are then
> bit blt'ed to the health bitmaps fetched from the hypervisor. In case
> we are not able to fetch health information from the hypervisor we
> service the health bitmap from these two members. These members are
> accessible from sysfs at nmemX/papr/health_bitmap_override
>
> A new PDSM named 'SMART_INJECT' is proposed that accepts newly
> introduced 'struct nd_papr_pdsm_smart_inject' as payload thats
> exchanged between libndctl and papr_scm to indicate the requested
> smart-error states.
>
> When the processing the PDSM 'SMART_INJECT', papr_pdsm_smart_inject()
> constructs a pair or 'mask' and 'override' bitmaps from the payload
> and bit-blt it to the 'health_bitmap_{mask, override}' members. This
> ensures the after being fetched from the hypervisor, the health_bitmap
> reflects requested smart-error states.
>
> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
> ---
> Changelog:
>
> Since v2:
> * Rebased the patch to ppc-next
> * Added documentation for newly introduced sysfs attribute 'health_bitmap_override'
>
> Since v1:
> * Updated the patch description.
> * Removed dependency of a header movement patch.
> * Removed '__packed' attribute for 'struct nd_papr_pdsm_smart_inject' [Aneesh]
> ---
> Documentation/ABI/testing/sysfs-bus-papr-pmem | 13 +++
> arch/powerpc/include/uapi/asm/papr_pdsm.h | 18 ++++
> arch/powerpc/platforms/pseries/papr_scm.c | 94 ++++++++++++++++++-
> 3 files changed, 122 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
> index 95254cec92bf..8a0b2a7f7671 100644
> --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem
> +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem
> @@ -61,3 +61,16 @@ Description:
> * "CchRHCnt" : Cache Read Hit Count
> * "CchWHCnt" : Cache Write Hit Count
> * "FastWCnt" : Fast Write Count
> +
> +What: /sys/bus/nd/devices/nmemX/papr/health_bitmap_override
> +Date: Jan, 2022
> +KernelVersion: v5.17
> +Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, nvdimm@lists.linux.dev,
> +Description:
> + (RO) Reports the health bitmap override/mask bitmaps that are
> + applied to top bitmap received from PowerVM via the H_SCM_HEALTH
> + Hcall. Together these can be used to forcibly set/reset specific
> + bits returned from Hcall. These bitmaps are presently used to
> + simulate various health or shutdown states for an nvdimm and are
> + set by user-space tools like ndctl by issuing a PAPR DSM.
> +
> diff --git a/arch/powerpc/include/uapi/asm/papr_pdsm.h b/arch/powerpc/include/uapi/asm/papr_pdsm.h
> index 82488b1e7276..17439925045c 100644
> --- a/arch/powerpc/include/uapi/asm/papr_pdsm.h
> +++ b/arch/powerpc/include/uapi/asm/papr_pdsm.h
> @@ -116,6 +116,22 @@ struct nd_papr_pdsm_health {
> };
> };
>
> +/* Flags for injecting specific smart errors */
> +#define PDSM_SMART_INJECT_HEALTH_FATAL (1 << 0)
> +#define PDSM_SMART_INJECT_BAD_SHUTDOWN (1 << 1)
> +
> +struct nd_papr_pdsm_smart_inject {
> + union {
> + struct {
> + /* One or more of PDSM_SMART_INJECT_ */
> + __u32 flags;
> + __u8 fatal_enable;
> + __u8 unsafe_shutdown_enable;
> + };
> + __u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE];
> + };
> +};
> +
> /*
> * Methods to be embedded in ND_CMD_CALL request. These are sent to the kernel
> * via 'nd_cmd_pkg.nd_command' member of the ioctl struct
> @@ -123,12 +139,14 @@ struct nd_papr_pdsm_health {
> enum papr_pdsm {
> PAPR_PDSM_MIN = 0x0,
> PAPR_PDSM_HEALTH,
> + PAPR_PDSM_SMART_INJECT,
> PAPR_PDSM_MAX,
> };
>
> /* Maximal union that can hold all possible payload types */
> union nd_pdsm_payload {
> struct nd_papr_pdsm_health health;
> + struct nd_papr_pdsm_smart_inject smart_inject;
> __u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE];
> } __packed;
>
> diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
> index f48e87ac89c9..de4cf329cfb3 100644
> --- a/arch/powerpc/platforms/pseries/papr_scm.c
> +++ b/arch/powerpc/platforms/pseries/papr_scm.c
> @@ -68,6 +68,10 @@
> #define PAPR_SCM_PERF_STATS_EYECATCHER __stringify(SCMSTATS)
> #define PAPR_SCM_PERF_STATS_VERSION 0x1
>
> +/* Use bitblt method to override specific bits in the '_bitmap_' */
> +#define BITBLT_BITMAP(_bitmap_, _mask_, _override_) \
> + (((_bitmap_) & ~(_mask_)) | ((_mask_) & (_override_)))
> +
> /* Struct holding a single performance metric */
> struct papr_scm_perf_stat {
> u8 stat_id[8];
> @@ -120,6 +124,12 @@ struct papr_scm_priv {
>
> /* length of the stat buffer as expected by phyp */
> size_t stat_buffer_len;
> +
> + /* The bits which needs to be overridden */
> + u64 health_bitmap_mask;
> +
> + /* The overridden values for the bits having the masks set */
> + u64 health_bitmap_override;
> };
>
> static int papr_scm_pmem_flush(struct nd_region *nd_region,
> @@ -347,19 +357,28 @@ static ssize_t drc_pmem_query_stats(struct papr_scm_priv *p,
> static int __drc_pmem_query_health(struct papr_scm_priv *p)
> {
> unsigned long ret[PLPAR_HCALL_BUFSIZE];
> + u64 bitmap = 0;
> long rc;
>
> /* issue the hcall */
> rc = plpar_hcall(H_SCM_HEALTH, ret, p->drc_index);
> - if (rc != H_SUCCESS) {
> + if (rc == H_SUCCESS)
> + bitmap = ret[0] & ret[1];
> + else if (rc == H_FUNCTION)
> + dev_info_once(&p->pdev->dev,
> + "Hcall H_SCM_HEALTH not implemented, assuming empty health bitmap");
> + else {
> +
> dev_err(&p->pdev->dev,
> "Failed to query health information, Err:%ld\n", rc);
> return -ENXIO;
> }
>
> p->lasthealth_jiffies = jiffies;
> - p->health_bitmap = ret[0] & ret[1];
> -
> + /* Allow overriding specific health bits via bit blt. */
> + bitmap = BITBLT_BITMAP(bitmap, p->health_bitmap_mask,
> + p->health_bitmap_override);
> + WRITE_ONCE(p->health_bitmap, bitmap);
Why WRITE_ONCE ?
> dev_dbg(&p->pdev->dev,
> "Queried dimm health info. Bitmap:0x%016lx Mask:0x%016lx\n",
> ret[0], ret[1]);
> @@ -669,6 +688,54 @@ static int papr_pdsm_health(struct papr_scm_priv *p,
> return rc;
> }
>
> +/* Inject a smart error Add the dirty-shutdown-counter value to the pdsm */
> +static int papr_pdsm_smart_inject(struct papr_scm_priv *p,
> + union nd_pdsm_payload *payload)
> +{
> + int rc;
> + u32 supported_flags = 0;
> + u64 mask = 0, override = 0;
> +
> + /* Check for individual smart error flags and update mask and override */
> + if (payload->smart_inject.flags & PDSM_SMART_INJECT_HEALTH_FATAL) {
> + supported_flags |= PDSM_SMART_INJECT_HEALTH_FATAL;
> + mask |= PAPR_PMEM_HEALTH_FATAL;
> + override |= payload->smart_inject.fatal_enable ?
> + PAPR_PMEM_HEALTH_FATAL : 0;
> + }
> +
> + if (payload->smart_inject.flags & PDSM_SMART_INJECT_BAD_SHUTDOWN) {
> + supported_flags |= PDSM_SMART_INJECT_BAD_SHUTDOWN;
> + mask |= PAPR_PMEM_SHUTDOWN_DIRTY;
> + override |= payload->smart_inject.unsafe_shutdown_enable ?
> + PAPR_PMEM_SHUTDOWN_DIRTY : 0;
> + }
> +
> + dev_dbg(&p->pdev->dev, "[Smart-inject] Mask=%#llx override=%#llx\n",
> + mask, override);
> +
> + /* Prevent concurrent access to dimm health bitmap related members */
> + rc = mutex_lock_interruptible(&p->health_mutex);
> + if (rc)
> + return rc;
> +
> + /* Bitblt mask/override to corrosponding health_bitmap couterparts */
> + p->health_bitmap_mask = BITBLT_BITMAP(p->health_bitmap_mask,
> + mask, override);
is that correct? Should we do that mask & override ? Shouldn't this be
p->health_bitmap_mask = BITBLT_BITMAP(p->health_bitmap_mask,
mask, ~0x0UL);
> + p->health_bitmap_override = BITBLT_BITMAP(p->health_bitmap_override,
> + mask, override);
> +
> + /* Invalidate cached health bitmap */
> + p->lasthealth_jiffies = 0;
> +
> + mutex_unlock(&p->health_mutex);
> +
> + /* Return the supported flags back to userspace */
> + payload->smart_inject.flags = supported_flags;
> +
> + return sizeof(struct nd_papr_pdsm_health);
> +}
> +
> /*
> * 'struct pdsm_cmd_desc'
> * Identifies supported PDSMs' expected length of in/out payloads
> @@ -702,6 +769,12 @@ static const struct pdsm_cmd_desc __pdsm_cmd_descriptors[] = {
> .size_out = sizeof(struct nd_papr_pdsm_health),
> .service = papr_pdsm_health,
> },
> +
> + [PAPR_PDSM_SMART_INJECT] = {
> + .size_in = sizeof(struct nd_papr_pdsm_smart_inject),
> + .size_out = sizeof(struct nd_papr_pdsm_smart_inject),
> + .service = papr_pdsm_smart_inject,
> + },
> /* Empty */
> [PAPR_PDSM_MAX] = {
> .size_in = 0,
> @@ -838,6 +911,20 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
> return 0;
> }
>
> +static ssize_t health_bitmap_override_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct nvdimm *dimm = to_nvdimm(dev);
> + struct papr_scm_priv *p = nvdimm_provider_data(dimm);
> +
> + return sprintf(buf, "mask=%#llx override=%#llx\n",
> + READ_ONCE(p->health_bitmap_mask),
> + READ_ONCE(p->health_bitmap_override));
> +}
> +
> +static DEVICE_ATTR_ADMIN_RO(health_bitmap_override);
> +
> static ssize_t perf_stats_show(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -952,6 +1039,7 @@ static struct attribute *papr_nd_attributes[] = {
> &dev_attr_flags.attr,
> &dev_attr_perf_stats.attr,
> &dev_attr_dirty_shutdown.attr,
> + &dev_attr_health_bitmap_override.attr,
> NULL,
> };
>
> --
> 2.34.1
next prev parent reply other threads:[~2022-01-17 8:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-13 12:02 [PATCH v3] powerpc/papr_scm: Implement initial support for injecting smart errors Vaibhav Jain
2022-01-13 12:02 ` Vaibhav Jain
2022-01-17 8:30 ` Aneesh Kumar K.V [this message]
2022-01-17 8:30 ` Aneesh Kumar K.V
2022-01-17 14:11 ` Vaibhav Jain
2022-01-17 14:11 ` Vaibhav Jain
2022-01-18 17:59 ` Ira Weiny
2022-01-18 17:59 ` Ira Weiny
2022-01-19 15:05 ` Vaibhav Jain
2022-01-19 15:05 ` Vaibhav Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871r167oi5.fsf@linux.ibm.com \
--to=aneesh.kumar@linux.ibm.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=nvdimm@lists.linux.dev \
--cc=sbhat@linux.ibm.com \
--cc=vaibhav@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.