From: Kalle Valo <kvalo@codeaurora.org>
To: Wen Gong <quic_wgong@quicinc.com>
Cc: <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH v2] ath11k: add wait operation for tx management packets for flush from mac80211
Date: Mon, 22 Nov 2021 14:19:29 +0200 [thread overview]
Message-ID: <871r389ycu.fsf@codeaurora.org> (raw)
In-Reply-To: <20211118095254.7916-1-quic_wgong@quicinc.com> (Wen Gong's message of "Thu, 18 Nov 2021 04:52:54 -0500")
Wen Gong <quic_wgong@quicinc.com> writes:
> In ath11k, tx of management packet is doing in a work queue. Sometimes
> the workqueue does not finish tx immediately, then it lead after the next
> step of vdev delete finished, it start to send the management packet to
> firmware and lead firmware crash.
>
> ieee80211_set_disassoc have logic of ieee80211_flush_queues after it
> send_deauth_disassoc to ath11k, its purpose is make sure the deauth
> was actually sent, so it need to change ath11k to match the purpose
> of mac80211.
>
> To address these issue wait for tx mgmt and tx data packets.
>
> Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1
>
> Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
I sometimes see new warnings with this patch:
[ 142.346474] ath11k_pci 0000:06:00.0: failed to flush mgmt transmit queue 0
[ 147.466367] ath11k_pci 0000:06:00.0: failed to flush mgmt transmit queue 0
And more importantly this breaks suspend on my NUC testbox:
[ 175.141820] PM: suspend entry (deep)
[ 175.150512] Filesystems sync: 0.008 seconds
[ 175.229703] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 175.233506] OOM killer disabled.
[ 175.233588] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 175.242457] printk: Suspending console(s) (use no_console_suspend to debug)
[ 175.245269] wlan0: deauthenticating from 00:03:7f:48:81:59 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 175.285881] e1000e: EEE TX LPI TIMER: 00000011
[ 180.745259] ath11k_pci 0000:06:00.0: failed to flush mgmt transmit queue 0
[ 185.864977] ath11k_pci 0000:06:00.0: failed to flush mgmt transmit queue 0
[ 185.970601] PM: Some devices failed to suspend, or early wake event detected
[ 185.974081] usb usb3: root hub lost power or was reset
[ 185.974135] usb usb4: root hub lost power or was reset
[ 186.098870] nvme nvme0: 8/0/0 default/read/poll queues
[ 186.297077] OOM killer enabled.
[ 186.297361] Restarting tasks ... done.
[ 186.343733] PM: suspend exit
My setup:
Tag: ath-202111221111
[ 151.123732] ath11k_pci 0000:06:00.0: MSI vectors: 32
[ 151.123851] ath11k_pci 0000:06:00.0: qca6390 hw2.0
[ 151.720618] ath11k_pci 0000:06:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff
[ 151.720912] ath11k_pci 0000:06:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@codeaurora.org>
To: Wen Gong <quic_wgong@quicinc.com>
Cc: <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH v2] ath11k: add wait operation for tx management packets for flush from mac80211
Date: Mon, 22 Nov 2021 14:19:29 +0200 [thread overview]
Message-ID: <871r389ycu.fsf@codeaurora.org> (raw)
In-Reply-To: <20211118095254.7916-1-quic_wgong@quicinc.com> (Wen Gong's message of "Thu, 18 Nov 2021 04:52:54 -0500")
Wen Gong <quic_wgong@quicinc.com> writes:
> In ath11k, tx of management packet is doing in a work queue. Sometimes
> the workqueue does not finish tx immediately, then it lead after the next
> step of vdev delete finished, it start to send the management packet to
> firmware and lead firmware crash.
>
> ieee80211_set_disassoc have logic of ieee80211_flush_queues after it
> send_deauth_disassoc to ath11k, its purpose is make sure the deauth
> was actually sent, so it need to change ath11k to match the purpose
> of mac80211.
>
> To address these issue wait for tx mgmt and tx data packets.
>
> Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1
>
> Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
I sometimes see new warnings with this patch:
[ 142.346474] ath11k_pci 0000:06:00.0: failed to flush mgmt transmit queue 0
[ 147.466367] ath11k_pci 0000:06:00.0: failed to flush mgmt transmit queue 0
And more importantly this breaks suspend on my NUC testbox:
[ 175.141820] PM: suspend entry (deep)
[ 175.150512] Filesystems sync: 0.008 seconds
[ 175.229703] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 175.233506] OOM killer disabled.
[ 175.233588] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 175.242457] printk: Suspending console(s) (use no_console_suspend to debug)
[ 175.245269] wlan0: deauthenticating from 00:03:7f:48:81:59 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 175.285881] e1000e: EEE TX LPI TIMER: 00000011
[ 180.745259] ath11k_pci 0000:06:00.0: failed to flush mgmt transmit queue 0
[ 185.864977] ath11k_pci 0000:06:00.0: failed to flush mgmt transmit queue 0
[ 185.970601] PM: Some devices failed to suspend, or early wake event detected
[ 185.974081] usb usb3: root hub lost power or was reset
[ 185.974135] usb usb4: root hub lost power or was reset
[ 186.098870] nvme nvme0: 8/0/0 default/read/poll queues
[ 186.297077] OOM killer enabled.
[ 186.297361] Restarting tasks ... done.
[ 186.343733] PM: suspend exit
My setup:
Tag: ath-202111221111
[ 151.123732] ath11k_pci 0000:06:00.0: MSI vectors: 32
[ 151.123851] ath11k_pci 0000:06:00.0: qca6390 hw2.0
[ 151.720618] ath11k_pci 0000:06:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff
[ 151.720912] ath11k_pci 0000:06:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
next prev parent reply other threads:[~2021-11-22 12:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-18 9:52 [PATCH v2] ath11k: add wait operation for tx management packets for flush from mac80211 Wen Gong
2021-11-18 9:52 ` Wen Gong
2021-11-22 12:19 ` Kalle Valo [this message]
2021-11-22 12:19 ` Kalle Valo
2021-11-26 3:32 ` Wen Gong
2021-11-26 3:32 ` Wen Gong
2021-11-26 6:54 ` Wen Gong
2021-11-26 6:54 ` Wen Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871r389ycu.fsf@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_wgong@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.