From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 net-next 0/7] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver
Date: Thu, 01 Dec 2016 17:09:15 +0100 [thread overview]
Message-ID: <871sxrk4wk.fsf@free-electrons.com> (raw)
In-Reply-To: <CAPv3WKdWyS0wCVsRKR86qpMx4r8NN9=RmjM9oHFy2mmvaR5PAA@mail.gmail.com> (Marcin Wojtas's message of "Thu, 1 Dec 2016 17:07:01 +0100")
Hi Marcin,
On jeu., d?c. 01 2016, Marcin Wojtas <mw@semihalf.com> wrote:
> Hi Gregory,
>
> Checked on a388-gp with and without HWBM, also both ports work on
> a3700 (second one after changing to sgmii).
>
> Tested-by: Marcin Wojtas <mw@semihalf.com>
Thanks, I am going to send a new version with tour tested-by and the dts
fix for the second port.
Gregory
>
> Best regards,
> Marcin
>
> 2016-11-30 22:42 GMT+01:00 Gregory CLEMENT <gregory.clement@free-electrons.com>:
>> Hi,
>>
>> The Armada 37xx is a new ARMv8 SoC from Marvell using same network
>> controller as the older Armada 370/38x/XP SoCs. This series adapts the
>> driver in order to be able to use it on this new SoC. The main changes
>> are:
>>
>> - 64-bits support: the first patches allow using the driver on a 64-bit
>> architecture.
>>
>> - MBUS support: the mbus configuration is different on Armada 37xx
>> from the older SoCs.
>>
>> - per cpu interrupt: Armada 37xx do not support per cpu interrupt for
>> the NETA IP, the non-per-CPU behavior was added back.
>>
>> The first patch is an optimization in the rx path in swbm mode.
>> The second patch remove unnecessary allocation for HWBM.
>> The first item is solved by patches 4 and 5.
>> The 2 last items are solved by patch 6.
>> In patch 7 the dt support is added.
>>
>> Beside Armada 37xx, this series have been again tested on Armada XP
>> and Armada 38x (with Hardware Buffer Management and with Software
>> Buffer Management).
>>
>> This is the 5th version of the series:
>> - 1st version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/469588.html
>>
>> - 2nd version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/470476.html
>>
>> - 3rd version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/470901.html
>>
>> - 4th version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/471039.html
>>
>> Changelog:
>> v4 -> v5:
>> - remove unnecessary cast in patch 3
>>
>> v3 -> v4:
>> - Adding new patch: "net: mvneta: do not allocate buffer in rxq init
>> with HWBM"
>>
>> - Simplify the HWBM case in patch 3 as suggested by Marcin
>>
>> v2 -> v3:
>> - Adding patch 1 "Optimize rx path for small frame"
>>
>> - Fix the kbuild error by moving the "phys_addr += pp->rx_offset_correction;"
>> line from patch 2 to patch 3 where rx_offset_correction is introduced.
>>
>> - Move the memory allocation of the buf_virt_addr of the rxq to be
>> called by the probe function in order to avoid a memory leak.
>>
>> Thanks,
>>
>> Gregory
>>
>> Gregory CLEMENT (5):
>> net: mvneta: Optimize rx path for small frame
>> net: mvneta: Do not allocate buffer in rxq init with HWBM
>> net: mvneta: Use cacheable memory to store the rx buffer virtual address
>> net: mvneta: Only disable mvneta_bm for 64-bits
>> ARM64: dts: marvell: Add network support for Armada 3700
>>
>> Marcin Wojtas (2):
>> net: mvneta: Convert to be 64 bits compatible
>> net: mvneta: Add network support for Armada 3700 SoC
>>
>> Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 +-
>> arch/arm64/boot/dts/marvell/armada-3720-db.dts | 23 +++++-
>> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 23 +++++-
>> drivers/net/ethernet/marvell/Kconfig | 10 +-
>> drivers/net/ethernet/marvell/mvneta.c | 344 +++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
>> 5 files changed, 305 insertions(+), 102 deletions(-)
>>
>> base-commit: 436accebb53021ef7c63535f60bda410aa87c136
>> --
>> git-series 0.8.10
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Marcin Wojtas <mw@semihalf.com>
Cc: "David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Jisheng Zhang <jszhang@marvell.com>,
Arnd Bergmann <arnd@arndb.de>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
"linux-arm-kernel\@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Nadav Haklai <nadavh@marvell.com>,
Dmitri Epshtein <dima@marvell.com>,
Yelena Krivosheev <yelena@marvell.com>
Subject: Re: [PATCH v5 net-next 0/7] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver
Date: Thu, 01 Dec 2016 17:09:15 +0100 [thread overview]
Message-ID: <871sxrk4wk.fsf@free-electrons.com> (raw)
In-Reply-To: <CAPv3WKdWyS0wCVsRKR86qpMx4r8NN9=RmjM9oHFy2mmvaR5PAA@mail.gmail.com> (Marcin Wojtas's message of "Thu, 1 Dec 2016 17:07:01 +0100")
Hi Marcin,
On jeu., déc. 01 2016, Marcin Wojtas <mw@semihalf.com> wrote:
> Hi Gregory,
>
> Checked on a388-gp with and without HWBM, also both ports work on
> a3700 (second one after changing to sgmii).
>
> Tested-by: Marcin Wojtas <mw@semihalf.com>
Thanks, I am going to send a new version with tour tested-by and the dts
fix for the second port.
Gregory
>
> Best regards,
> Marcin
>
> 2016-11-30 22:42 GMT+01:00 Gregory CLEMENT <gregory.clement@free-electrons.com>:
>> Hi,
>>
>> The Armada 37xx is a new ARMv8 SoC from Marvell using same network
>> controller as the older Armada 370/38x/XP SoCs. This series adapts the
>> driver in order to be able to use it on this new SoC. The main changes
>> are:
>>
>> - 64-bits support: the first patches allow using the driver on a 64-bit
>> architecture.
>>
>> - MBUS support: the mbus configuration is different on Armada 37xx
>> from the older SoCs.
>>
>> - per cpu interrupt: Armada 37xx do not support per cpu interrupt for
>> the NETA IP, the non-per-CPU behavior was added back.
>>
>> The first patch is an optimization in the rx path in swbm mode.
>> The second patch remove unnecessary allocation for HWBM.
>> The first item is solved by patches 4 and 5.
>> The 2 last items are solved by patch 6.
>> In patch 7 the dt support is added.
>>
>> Beside Armada 37xx, this series have been again tested on Armada XP
>> and Armada 38x (with Hardware Buffer Management and with Software
>> Buffer Management).
>>
>> This is the 5th version of the series:
>> - 1st version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/469588.html
>>
>> - 2nd version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/470476.html
>>
>> - 3rd version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/470901.html
>>
>> - 4th version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/471039.html
>>
>> Changelog:
>> v4 -> v5:
>> - remove unnecessary cast in patch 3
>>
>> v3 -> v4:
>> - Adding new patch: "net: mvneta: do not allocate buffer in rxq init
>> with HWBM"
>>
>> - Simplify the HWBM case in patch 3 as suggested by Marcin
>>
>> v2 -> v3:
>> - Adding patch 1 "Optimize rx path for small frame"
>>
>> - Fix the kbuild error by moving the "phys_addr += pp->rx_offset_correction;"
>> line from patch 2 to patch 3 where rx_offset_correction is introduced.
>>
>> - Move the memory allocation of the buf_virt_addr of the rxq to be
>> called by the probe function in order to avoid a memory leak.
>>
>> Thanks,
>>
>> Gregory
>>
>> Gregory CLEMENT (5):
>> net: mvneta: Optimize rx path for small frame
>> net: mvneta: Do not allocate buffer in rxq init with HWBM
>> net: mvneta: Use cacheable memory to store the rx buffer virtual address
>> net: mvneta: Only disable mvneta_bm for 64-bits
>> ARM64: dts: marvell: Add network support for Armada 3700
>>
>> Marcin Wojtas (2):
>> net: mvneta: Convert to be 64 bits compatible
>> net: mvneta: Add network support for Armada 3700 SoC
>>
>> Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 +-
>> arch/arm64/boot/dts/marvell/armada-3720-db.dts | 23 +++++-
>> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 23 +++++-
>> drivers/net/ethernet/marvell/Kconfig | 10 +-
>> drivers/net/ethernet/marvell/mvneta.c | 344 +++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
>> 5 files changed, 305 insertions(+), 102 deletions(-)
>>
>> base-commit: 436accebb53021ef7c63535f60bda410aa87c136
>> --
>> git-series 0.8.10
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2016-12-01 16:09 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-30 21:42 [PATCH v5 net-next 0/7] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 1/7] net: mvneta: Optimize rx path for small frame Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 2/7] net: mvneta: Do not allocate buffer in rxq init with HWBM Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 3/7] net: mvneta: Use cacheable memory to store the rx buffer virtual address Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-12-01 11:38 ` Jisheng Zhang
2016-12-01 11:38 ` Jisheng Zhang
2016-12-01 11:38 ` Jisheng Zhang
2016-11-30 21:42 ` [PATCH v5 net-next 4/7] net: mvneta: Convert to be 64 bits compatible Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-12-01 11:26 ` Jisheng Zhang
2016-12-01 11:26 ` Jisheng Zhang
2016-12-01 11:41 ` Jisheng Zhang
2016-12-01 11:41 ` Jisheng Zhang
2016-12-01 11:48 ` Marcin Wojtas
2016-12-01 11:48 ` Marcin Wojtas
2016-12-01 12:01 ` Gregory CLEMENT
2016-12-01 12:01 ` Gregory CLEMENT
2016-12-01 12:02 ` Jisheng Zhang
2016-12-01 12:02 ` Jisheng Zhang
2016-12-01 12:02 ` Jisheng Zhang
2016-12-01 12:16 ` Jisheng Zhang
2016-12-01 12:16 ` Jisheng Zhang
2016-12-01 12:33 ` Marcin Wojtas
2016-12-01 12:33 ` Marcin Wojtas
2016-11-30 21:42 ` [PATCH v5 net-next 5/7] net: mvneta: Only disable mvneta_bm for 64-bits Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 6/7] net: mvneta: Add network support for Armada 3700 SoC Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 7/7] ARM64: dts: marvell: Add network support for Armada 3700 Gregory CLEMENT
2016-11-30 21:42 ` Gregory CLEMENT
2016-12-01 16:05 ` Marcin Wojtas
2016-12-01 16:05 ` Marcin Wojtas
2016-12-01 16:07 ` [PATCH v5 net-next 0/7] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver Marcin Wojtas
2016-12-01 16:07 ` Marcin Wojtas
2016-12-01 16:09 ` Gregory CLEMENT [this message]
2016-12-01 16:09 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871sxrk4wk.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.