* [v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs [not found] <836543238.4244780.1600533511769.ref@mail.yahoo.com> @ 2020-09-19 16:38 ` Hans Geiblinger 2022-01-21 14:09 ` Kalle Valo 0 siblings, 1 reply; 4+ messages in thread From: Hans Geiblinger @ 2020-09-19 16:38 UTC (permalink / raw) To: ath10k@lists.infradead.org; +Cc: chunkeey@gmail.com [-- Attachment #1: Type: text/plain, Size: 719 bytes --] Hi, The support for this device is currently being added into OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). * description for what hardware this is: - it is a QCA9888 based radio used for 5Ghz * origin of the board file - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img * ids to be used with the board file - QCA9888 hw1.0 + bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc MD5: 1f263c52e7862bccab6fd6551092077c * attach the actual board file - The name of the files are equal to the id string in the board-2.bin (minus the ".bin") Kind regards, Hans [-- Attachment #2: bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc.bin --] [-- Type: application/octet-stream, Size: 12064 bytes --] [-- Attachment #3: Type: text/plain, Size: 146 bytes --] _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs 2020-09-19 16:38 ` [v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs Hans Geiblinger @ 2022-01-21 14:09 ` Kalle Valo 2022-02-20 0:06 ` Christian Lamparter 0 siblings, 1 reply; 4+ messages in thread From: Kalle Valo @ 2022-01-21 14:09 UTC (permalink / raw) To: Hans Geiblinger; +Cc: ath10k@lists.infradead.org, chunkeey@gmail.com Hans Geiblinger <cybrnook2002@yahoo.com> writes: > The support for this device is currently being added into OpenWrt. This AP requires > two special BDFs to get the Wi-Fi PHYs working (correctly). > > > * description for what hardware this is: > - it is a QCA9888 based radio used for 5Ghz > > > * origin of the board file > - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img > > > * ids to be used with the board file > - QCA9888 hw1.0 > + bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc > MD5: 1f263c52e7862bccab6fd6551092077c > > > * attach the actual board file > - The name of the files are equal to the id string in the > board-2.bin (minus the ".bin") Thanks, added to QCA9984/hw1.0/board-2.bin: New: bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc Changed: Deleted: 1 board image(s) added, 0 changed, 0 deleted, 19 in total https://github.com/kvalo/ath10k-firmware/commit/c0b61963e3ed79cb3d95d915dbdde1fd21ef3cf9 -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs 2022-01-21 14:09 ` Kalle Valo @ 2022-02-20 0:06 ` Christian Lamparter 2022-04-13 9:02 ` Kalle Valo 0 siblings, 1 reply; 4+ messages in thread From: Christian Lamparter @ 2022-02-20 0:06 UTC (permalink / raw) To: Kalle Valo, Hans Geiblinger; +Cc: ath10k@lists.infradead.org Hi, On 21/01/2022 15:09, Kalle Valo wrote: > Hans Geiblinger <cybrnook2002@yahoo.com> writes: > >> The support for this device is currently being added into OpenWrt. This AP requires >> two special BDFs to get the Wi-Fi PHYs working (correctly). >> >> >> * description for what hardware this is: >> - it is a QCA9888 based radio used for 5Ghz >> >> >> * origin of the board file >> - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img >> >> >> * ids to be used with the board file >> - QCA9888 hw1.0 >> + bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc >> MD5: 1f263c52e7862bccab6fd6551092077c >> >> >> * attach the actual board file >> - The name of the files are equal to the id string in the >> board-2.bin (minus the ".bin") > > Thanks, added to QCA9984/hw1.0/board-2.bin: Oh... I just noticed. I think this got misplaced into QCA9984's board-2.bin. But this was for the QCA9888(v2). :( Well, at least there shouldn't be any conflicts. Should I resend the Linksys MR8300's board files and add that as a note for your next round? (BTW: hope linux-firmware.git syncs them up anyway.) Cheers, Christian _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs 2022-02-20 0:06 ` Christian Lamparter @ 2022-04-13 9:02 ` Kalle Valo 0 siblings, 0 replies; 4+ messages in thread From: Kalle Valo @ 2022-04-13 9:02 UTC (permalink / raw) To: Christian Lamparter; +Cc: Hans Geiblinger, ath10k@lists.infradead.org Christian Lamparter <chunkeey@gmail.com> writes: > Hi, > > On 21/01/2022 15:09, Kalle Valo wrote: >> Hans Geiblinger <cybrnook2002@yahoo.com> writes: >> >>> The support for this device is currently being added into OpenWrt. This AP requires >>> two special BDFs to get the Wi-Fi PHYs working (correctly). >>> >>> >>> * description for what hardware this is: >>> - it is a QCA9888 based radio used for 5Ghz >>> >>> >>> * origin of the board file >>> - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img >>> >>> >>> * ids to be used with the board file >>> - QCA9888 hw1.0 >>> + bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc >>> MD5: 1f263c52e7862bccab6fd6551092077c >>> >>> >>> * attach the actual board file >>> - The name of the files are equal to the id string in the >>> board-2.bin (minus the ".bin") >> >> Thanks, added to QCA9984/hw1.0/board-2.bin: > > Oh... I just noticed. I think this got misplaced into > QCA9984's board-2.bin. But this was for the QCA9888(v2). :( Oh, sorry about that. Very good that you noticed it! I still manually choose the directory so mistakes can happen. BTW, the subject should have hw2.0 instead of hw1.0. > Well, at least there shouldn't be any conflicts. > Should I resend the Linksys MR8300's board files and > add that as a note for your next round? No need to resend, I fixed it manually now. Please double check: https://github.com/kvalo/ath10k-firmware/commit/b80f1c521e3c406f3018aa2b2b348b495b51f0f3 -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-04-13 9:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <836543238.4244780.1600533511769.ref@mail.yahoo.com>
2020-09-19 16:38 ` [v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs Hans Geiblinger
2022-01-21 14:09 ` Kalle Valo
2022-02-20 0:06 ` Christian Lamparter
2022-04-13 9:02 ` Kalle Valo
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.