From: Lars Povlsen <lars.povlsen@microchip.com>
To: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Mark Brown <broonie@kernel.org>, Peter Rosin <peda@axentia.se>,
"Microchip Linux Driver Support" <UNGLinuxDriver@microchip.com>,
<linux-spi@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
"Serge Semin" <fancer.lancer@gmail.com>,
Serge Semin <Sergey.Semin@baikalelectronics.ru>
Subject: Re: [PATCH v3 4/8] mux: sparx5: Add Sparx5 SPI mux driver
Date: Thu, 2 Jul 2020 13:33:29 +0200 [thread overview]
Message-ID: <87366akv7a.fsf@soft-dev15.microsemi.net> (raw)
In-Reply-To: <20200702101331.26375-5-lars.povlsen@microchip.com>
Lars Povlsen writes:
> The Sparx5 mux driver may be used to control selecting between two
> alternate SPI bus segments connected to the SPI controller
> (spi-dw-mmio).
>
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
> ---
> drivers/mux/Makefile | 2 +
> drivers/mux/sparx5-spi.c | 138 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 140 insertions(+)
> create mode 100644 drivers/mux/sparx5-spi.c
>
...
> +
> +#define SPARX5_MAX_CS 16
> +
> +struct mux_sparx5 {
> + struct regmap *syscon;
> + u8 bus[SPARX5_MAX_CS];
> + int cur_bus;
> +};
Yeah, "cur_bus" is a leftover. I'll remove it.
--
Lars Povlsen,
Microchip
WARNING: multiple messages have this Message-ID (diff)
From: Lars Povlsen <lars.povlsen@microchip.com>
To: Lars Povlsen <lars.povlsen@microchip.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Serge Semin <fancer.lancer@gmail.com>,
linux-spi@vger.kernel.org,
Serge Semin <Sergey.Semin@baikalelectronics.ru>,
Mark Brown <broonie@kernel.org>,
Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
Peter Rosin <peda@axentia.se>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 4/8] mux: sparx5: Add Sparx5 SPI mux driver
Date: Thu, 2 Jul 2020 13:33:29 +0200 [thread overview]
Message-ID: <87366akv7a.fsf@soft-dev15.microsemi.net> (raw)
In-Reply-To: <20200702101331.26375-5-lars.povlsen@microchip.com>
Lars Povlsen writes:
> The Sparx5 mux driver may be used to control selecting between two
> alternate SPI bus segments connected to the SPI controller
> (spi-dw-mmio).
>
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
> ---
> drivers/mux/Makefile | 2 +
> drivers/mux/sparx5-spi.c | 138 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 140 insertions(+)
> create mode 100644 drivers/mux/sparx5-spi.c
>
...
> +
> +#define SPARX5_MAX_CS 16
> +
> +struct mux_sparx5 {
> + struct regmap *syscon;
> + u8 bus[SPARX5_MAX_CS];
> + int cur_bus;
> +};
Yeah, "cur_bus" is a leftover. I'll remove it.
--
Lars Povlsen,
Microchip
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-02 11:33 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-02 10:13 [PATCH v3 0/8] spi: Adding support for Microchip Sparx5 SoC Lars Povlsen
2020-07-02 10:13 ` Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 1/8] spi: dw: Add support for RX sample delay register Lars Povlsen
2020-07-02 10:13 ` Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 2/8] arm64: dts: sparx5: Add SPI controller and SPI mux Lars Povlsen
2020-07-02 10:13 ` Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 3/8] spi: dw: Add Microchip Sparx5 support Lars Povlsen
2020-07-02 10:13 ` Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 4/8] mux: sparx5: Add Sparx5 SPI mux driver Lars Povlsen
2020-07-02 10:13 ` Lars Povlsen
2020-07-02 11:33 ` Lars Povlsen [this message]
2020-07-02 11:33 ` Lars Povlsen
2020-07-02 11:36 ` Peter Rosin
2020-07-02 11:36 ` Peter Rosin
2020-07-03 9:14 ` Lars Povlsen
2020-07-03 9:14 ` Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 5/8] dt-bindings: snps,dw-apb-ssi: Add sparx5 support, plus snps,rx-sample-delay-ns property Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 5/8] dt-bindings: snps, dw-apb-ssi: Add sparx5 support, plus snps, rx-sample-delay-ns property Lars Povlsen
2020-07-13 19:22 ` [PATCH v3 5/8] dt-bindings: snps,dw-apb-ssi: Add sparx5 support, plus snps,rx-sample-delay-ns property Rob Herring
2020-07-13 19:22 ` [PATCH v3 5/8] dt-bindings: snps, dw-apb-ssi: " Rob Herring
2020-07-13 19:52 ` [PATCH v3 5/8] dt-bindings: snps,dw-apb-ssi: " Serge Semin
2020-07-13 19:52 ` [PATCH v3 5/8] dt-bindings: snps, dw-apb-ssi: " Serge Semin
2020-07-14 8:30 ` [PATCH v3 5/8] dt-bindings: snps,dw-apb-ssi: " Lars Povlsen
2020-07-14 8:30 ` [PATCH v3 5/8] dt-bindings: snps, dw-apb-ssi: Add sparx5 support, plus snps, rx-sample-delay-ns property Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 6/8] dt-bindings: microchip,sparx5-spi-mux: Add Sparx5 SPI mux driver bindings Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 6/8] dt-bindings: microchip, sparx5-spi-mux: " Lars Povlsen
2020-07-13 19:29 ` [PATCH v3 6/8] dt-bindings: microchip,sparx5-spi-mux: " Rob Herring
2020-07-13 19:29 ` [PATCH v3 6/8] dt-bindings: microchip, sparx5-spi-mux: " Rob Herring
2020-07-14 8:52 ` [PATCH v3 6/8] dt-bindings: microchip,sparx5-spi-mux: " Lars Povlsen
2020-07-14 8:52 ` [PATCH v3 6/8] dt-bindings: microchip, sparx5-spi-mux: " Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 7/8] arm64: dts: sparx5: Add spi-nor support Lars Povlsen
2020-07-02 10:13 ` Lars Povlsen
2020-07-02 10:13 ` [PATCH v3 8/8] arm64: dts: sparx5: Add spi-nand devices Lars Povlsen
2020-07-02 10:13 ` Lars Povlsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87366akv7a.fsf@soft-dev15.microsemi.net \
--to=lars.povlsen@microchip.com \
--cc=Sergey.Semin@baikalelectronics.ru \
--cc=UNGLinuxDriver@microchip.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=peda@axentia.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.