All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Alex Bennée" <alex.bennee@linaro.org>
To: Christoffer Dall <cdall@linaro.org>
Cc: kvm@vger.kernel.org, julien.thierry@arm.com,
	marc.zyngier@arm.com, linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu
Subject: Re: [PATCH v3 0/3] KVM: arm64: single step emulation instructions
Date: Tue, 21 Nov 2017 12:43:12 +0000	[thread overview]
Message-ID: <873757yf8f.fsf@linaro.org> (raw)
In-Reply-To: <20171120154131.GO28855@cbox>


Christoffer Dall <cdall@linaro.org> writes:

> Hi Alex,
>
> On Thu, Nov 16, 2017 at 03:39:18PM +0000, Alex Bennée wrote:
>> Hi,
>>
>> This is rev 3 of the series, practically the same than rev 2 but fixed
>> a return 1->0 in the kvm_run loop that Julien caught. I've added his
>> r-b tags to the other patches.
>>
>> As usual revision details bellow the --- in each patch.
>
> Thanks for taking care of this.
>
> I have applied the series and slightly tweaked the commit messages and
> commentary.
>
> Did we simply decide to not worry about exiting to userspace if we do
> fast-path emulation, such as for the errata workaround and GIC
> mashaling in switch.c ?

Compile tested only:

--8<---------------cut here---------------start------------->8---
kvm: arm64: handle single-step of hyp emulated mmio

There is a fast-path of MMIO emulation inside hyp mode. The handling
of single-step is broadly the same as kvm_arm_handle_step_debug()
except we just setup ESR/HSR so handle_exit() does the correct thing
as we exit.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
 arch/arm64/kvm/hyp/switch.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 945e79c641c4..841dc79d11fd 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -263,7 +263,11 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
 	return true;
 }

-static void __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
+/* Skip an instruction which has been emulated. Returns true if
+ * execution can continue or false if we need to exit hyp mode because
+ * single-step was in effect.
+ */
+static bool __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
 {
 	*vcpu_pc(vcpu) = read_sysreg_el2(elr);

@@ -276,6 +280,14 @@ static void __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
 	}

 	write_sysreg_el2(*vcpu_pc(vcpu), elr);
+
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+		vcpu->arch.fault.esr_el2 =
+			(ESR_ELx_EC_SOFTSTP_LOW << ESR_ELx_EC_SHIFT) | 0x22;
+		return false;
+	} else {
+		return true;
+	}
 }

 int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
@@ -336,8 +348,10 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 			int ret = __vgic_v2_perform_cpuif_access(vcpu);

 			if (ret == 1) {
-				__skip_instr(vcpu);
-				goto again;
+				if (__skip_instr(vcpu))
+					goto again;
+				else
+					exit_code = ARM_EXCEPTION_TRAP;
 			}

 			if (ret == -1) {
@@ -357,8 +371,10 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 		int ret = __vgic_v3_perform_cpuif_access(vcpu);

 		if (ret == 1) {
-			__skip_instr(vcpu);
-			goto again;
+			if (__skip_instr(vcpu))
+				goto again;
+			else
+				exit_code = ARM_EXCEPTION_TRAP;
 		}

 		/* 0 falls through to be handled out of EL2 */
--8<---------------cut here---------------end--------------->8---
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

WARNING: multiple messages have this Message-ID (diff)
From: alex.bennee@linaro.org (Alex Bennée)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/3] KVM: arm64: single step emulation instructions
Date: Tue, 21 Nov 2017 12:43:12 +0000	[thread overview]
Message-ID: <873757yf8f.fsf@linaro.org> (raw)
In-Reply-To: <20171120154131.GO28855@cbox>


Christoffer Dall <cdall@linaro.org> writes:

> Hi Alex,
>
> On Thu, Nov 16, 2017 at 03:39:18PM +0000, Alex Benn?e wrote:
>> Hi,
>>
>> This is rev 3 of the series, practically the same than rev 2 but fixed
>> a return 1->0 in the kvm_run loop that Julien caught. I've added his
>> r-b tags to the other patches.
>>
>> As usual revision details bellow the --- in each patch.
>
> Thanks for taking care of this.
>
> I have applied the series and slightly tweaked the commit messages and
> commentary.
>
> Did we simply decide to not worry about exiting to userspace if we do
> fast-path emulation, such as for the errata workaround and GIC
> mashaling in switch.c ?

Compile tested only:

--8<---------------cut here---------------start------------->8---
kvm: arm64: handle single-step of hyp emulated mmio

There is a fast-path of MMIO emulation inside hyp mode. The handling
of single-step is broadly the same as kvm_arm_handle_step_debug()
except we just setup ESR/HSR so handle_exit() does the correct thing
as we exit.

Signed-off-by: Alex Benn?e <alex.bennee@linaro.org>
---
 arch/arm64/kvm/hyp/switch.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 945e79c641c4..841dc79d11fd 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -263,7 +263,11 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
 	return true;
 }

-static void __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
+/* Skip an instruction which has been emulated. Returns true if
+ * execution can continue or false if we need to exit hyp mode because
+ * single-step was in effect.
+ */
+static bool __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
 {
 	*vcpu_pc(vcpu) = read_sysreg_el2(elr);

@@ -276,6 +280,14 @@ static void __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
 	}

 	write_sysreg_el2(*vcpu_pc(vcpu), elr);
+
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+		vcpu->arch.fault.esr_el2 =
+			(ESR_ELx_EC_SOFTSTP_LOW << ESR_ELx_EC_SHIFT) | 0x22;
+		return false;
+	} else {
+		return true;
+	}
 }

 int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
@@ -336,8 +348,10 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 			int ret = __vgic_v2_perform_cpuif_access(vcpu);

 			if (ret == 1) {
-				__skip_instr(vcpu);
-				goto again;
+				if (__skip_instr(vcpu))
+					goto again;
+				else
+					exit_code = ARM_EXCEPTION_TRAP;
 			}

 			if (ret == -1) {
@@ -357,8 +371,10 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 		int ret = __vgic_v3_perform_cpuif_access(vcpu);

 		if (ret == 1) {
-			__skip_instr(vcpu);
-			goto again;
+			if (__skip_instr(vcpu))
+				goto again;
+			else
+				exit_code = ARM_EXCEPTION_TRAP;
 		}

 		/* 0 falls through to be handled out of EL2 */
--8<---------------cut here---------------end--------------->8---

  parent reply	other threads:[~2017-11-21 12:40 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-16 15:39 [PATCH v3 0/3] KVM: arm64: single step emulation instructions Alex Bennée
2017-11-16 15:39 ` Alex Bennée
2017-11-16 15:39 ` [PATCH v3 1/3] kvm: arm debug: introduce helper for single-step Alex Bennée
2017-11-16 15:39   ` Alex Bennée
2017-11-16 15:39   ` Alex Bennée
2017-11-16 15:39 ` [PATCH v3 2/3] kvm: arm64: handle single-stepping trapped instructions Alex Bennée
2017-11-16 15:39   ` Alex Bennée
2017-11-16 15:39   ` Alex Bennée
2017-11-16 15:39 ` [PATCH v3 3/3] kvm: arm64: handle single-step of userspace mmio instructions Alex Bennée
2017-11-16 15:39   ` Alex Bennée
2017-11-16 15:39   ` Alex Bennée
2017-11-16 17:44   ` Julien Thierry
2017-11-16 17:44     ` Julien Thierry
2017-11-16 17:44     ` Julien Thierry
2017-11-20 15:41 ` [PATCH v3 0/3] KVM: arm64: single step emulation instructions Christoffer Dall
2017-11-20 15:41   ` Christoffer Dall
2017-11-21 12:12   ` Alex Bennée
2017-11-21 12:12     ` Alex Bennée
2017-11-21 12:43   ` Alex Bennée [this message]
2017-11-21 12:43     ` Alex Bennée
2017-11-21 13:10     ` Marc Zyngier
2017-11-21 13:10       ` Marc Zyngier
2017-11-22 11:46     ` Christoffer Dall
2017-11-22 11:46       ` Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=873757yf8f.fsf@linaro.org \
    --to=alex.bennee@linaro.org \
    --cc=cdall@linaro.org \
    --cc=julien.thierry@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.