[PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
@ 2011-01-06 19:54 ` Nishanth Menon
  0 siblings, 0 replies; 12+ messages in thread
From: Nishanth Menon @ 2011-01-06 19:54 UTC (permalink / raw)
  To: l-o; +Cc: l-a, Kevin, Tony, Koen Kooi, Nishanth Menon

Hi,
As discussed in the threads:
http://thread.gmane.org/gmane.linux.ports.arm.omap/47807/
http://marc.info/?t=121540030800004&r=1&w=2

here is the split up series with commit message after discussion:
http://www.beagleboard.org/irclogs/index.php?date=2011-01-06#T19:12:21

Koen Kooi (3):
  omap3: beaglexm: fix EHCI power up GPIO dir
  omap3: beaglexm: fix DVI reset GPIO
  omap3: beaglexm: power on DVI

 arch/arm/mach-omap2/board-omap3beagle.c |   37 ++++++++++++++++++++++++++----
 1 files changed, 32 insertions(+), 5 deletions(-)

v3:
	split up the series, addressed review comments

v2: http://marc.info/?t=129276977900002&r=1&w=2
	Reenable the PMU stat LED
v1: http://marc.info/?t=129172571000001&r=1&w=2

Regards,
Nishanth Menon

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
@ 2011-01-06 19:54 ` Nishanth Menon
  0 siblings, 0 replies; 12+ messages in thread
From: Nishanth Menon @ 2011-01-06 19:54 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,
As discussed in the threads:
http://thread.gmane.org/gmane.linux.ports.arm.omap/47807/
http://marc.info/?t=121540030800004&r=1&w=2

here is the split up series with commit message after discussion:
http://www.beagleboard.org/irclogs/index.php?date=2011-01-06#T19:12:21

Koen Kooi (3):
  omap3: beaglexm: fix EHCI power up GPIO dir
  omap3: beaglexm: fix DVI reset GPIO
  omap3: beaglexm: power on DVI

 arch/arm/mach-omap2/board-omap3beagle.c |   37 ++++++++++++++++++++++++++----
 1 files changed, 32 insertions(+), 5 deletions(-)

v3:
	split up the series, addressed review comments

v2: http://marc.info/?t=129276977900002&r=1&w=2
	Reenable the PMU stat LED
v1: http://marc.info/?t=129172571000001&r=1&w=2

Regards,
Nishanth Menon

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 1/3] omap3: beaglexm: fix EHCI power up GPIO dir
  2011-01-06 19:54 ` Nishanth Menon
@ 2011-01-06 19:54   ` Nishanth Menon
  -1 siblings, 0 replies; 12+ messages in thread
From: Nishanth Menon @ 2011-01-06 19:54 UTC (permalink / raw)
  To: l-o; +Cc: l-a, Kevin, Tony, Koen Kooi, Nishanth Menon

From: Koen Kooi <koen@beagleboard.org>

EHCI enable power pin is inverted (active high) in comparison
to vanilla beagle which is active low. Handle this case conditionally.

[nm@ti.com: helped split up]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
 arch/arm/mach-omap2/board-omap3beagle.c |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6c12760..1b5aa7a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -297,9 +297,16 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	gpio_request(gpio + 1, "EHCI_nOC");
 	gpio_direction_input(gpio + 1);
 
-	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+	/*
+	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
+	 * high / others active low)
+	 */
 	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
 	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+	else
+		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-- 
1.6.3.3


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v3 1/3] omap3: beaglexm: fix EHCI power up GPIO dir
@ 2011-01-06 19:54   ` Nishanth Menon
  0 siblings, 0 replies; 12+ messages in thread
From: Nishanth Menon @ 2011-01-06 19:54 UTC (permalink / raw)
  To: linux-arm-kernel

From: Koen Kooi <koen@beagleboard.org>

EHCI enable power pin is inverted (active high) in comparison
to vanilla beagle which is active low. Handle this case conditionally.

[nm at ti.com: helped split up]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
 arch/arm/mach-omap2/board-omap3beagle.c |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6c12760..1b5aa7a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -297,9 +297,16 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	gpio_request(gpio + 1, "EHCI_nOC");
 	gpio_direction_input(gpio + 1);
 
-	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+	/*
+	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
+	 * high / others active low)
+	 */
 	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
 	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+	else
+		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-- 
1.6.3.3

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v3 2/3] omap3: beaglexm: fix DVI reset GPIO
  2011-01-06 19:54 ` Nishanth Menon
@ 2011-01-06 19:54   ` Nishanth Menon
  -1 siblings, 0 replies; 12+ messages in thread
From: Nishanth Menon @ 2011-01-06 19:54 UTC (permalink / raw)
  To: l-o; +Cc: l-a, Kevin, Tony, Koen Kooi, Nishanth Menon

From: Koen Kooi <koen@beagleboard.org>

GPIO reset line for Beagle XM is different from vanilla beagle
so we populate it as part of gpio update routine.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
 arch/arm/mach-omap2/board-omap3beagle.c |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 1b5aa7a..d628f5e 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -199,7 +199,7 @@ static struct omap_dss_device beagle_dvi_device = {
 	.name = "dvi",
 	.driver_name = "generic_panel",
 	.phy.dpi.data_lines = 24,
-	.reset_gpio = 170,
+	.reset_gpio = -EINVAL,
 	.platform_enable = beagle_enable_dvi,
 	.platform_disable = beagle_disable_dvi,
 };
@@ -308,6 +308,12 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	else
 		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 
+	/* DVI reset GPIO is different between beagle revisions */
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+		beagle_dvi_device.reset_gpio = 129;
+	else
+		beagle_dvi_device.reset_gpio = 170;
+
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-- 
1.6.3.3


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v3 2/3] omap3: beaglexm: fix DVI reset GPIO
@ 2011-01-06 19:54   ` Nishanth Menon
  0 siblings, 0 replies; 12+ messages in thread
From: Nishanth Menon @ 2011-01-06 19:54 UTC (permalink / raw)
  To: linux-arm-kernel

From: Koen Kooi <koen@beagleboard.org>

GPIO reset line for Beagle XM is different from vanilla beagle
so we populate it as part of gpio update routine.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
 arch/arm/mach-omap2/board-omap3beagle.c |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 1b5aa7a..d628f5e 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -199,7 +199,7 @@ static struct omap_dss_device beagle_dvi_device = {
 	.name = "dvi",
 	.driver_name = "generic_panel",
 	.phy.dpi.data_lines = 24,
-	.reset_gpio = 170,
+	.reset_gpio = -EINVAL,
 	.platform_enable = beagle_enable_dvi,
 	.platform_disable = beagle_disable_dvi,
 };
@@ -308,6 +308,12 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	else
 		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 
+	/* DVI reset GPIO is different between beagle revisions */
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+		beagle_dvi_device.reset_gpio = 129;
+	else
+		beagle_dvi_device.reset_gpio = 170;
+
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-- 
1.6.3.3

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v3 3/3] omap3: beaglexm: power on DVI
  2011-01-06 19:54 ` Nishanth Menon
@ 2011-01-06 19:54   ` Nishanth Menon
  -1 siblings, 0 replies; 12+ messages in thread
From: Nishanth Menon @ 2011-01-06 19:54 UTC (permalink / raw)
  To: l-o; +Cc: l-a, Kevin, Tony, Koen Kooi, Nishanth Menon

From: Koen Kooi <koen@beagleboard.org>

TFP410 DVI chip is used to provide display out.
this chip is controlled by 2 lines:
LDO which supplies the power is controlled over gpio + 2
and the enable of the chip itself is done over gpio + 1
NOTE: the LDO is necessary for LED, serial blocks as well.

GPIO + 1 was used to sense USB overcurrent in vanilla beagle

[nm@ti.com: helped split up the patch]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
 arch/arm/mach-omap2/board-omap3beagle.c |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index d628f5e..7c82730 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -293,9 +293,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
-
-	gpio_request(gpio + 1, "EHCI_nOC");
-	gpio_direction_input(gpio + 1);
+	if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) {
+		gpio_request(gpio + 1, "EHCI_nOC");
+		gpio_direction_input(gpio + 1);
+	}
 
 	/*
 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
@@ -317,6 +318,19 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
+	/*
+	 * gpio + 1 on Xm controls the TFP410's enable line (active low)
+	 * gpio + 2 control varies depending on the board rev as follows:
+	 * P7/P8 revisions(prototype): Camera EN
+	 * A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
+	 */
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+		gpio_request(gpio + 1, "nDVI_PWR_EN");
+		gpio_direction_output(gpio + 1, 0);
+		gpio_request(gpio + 2, "DVI_LDO_EN");
+		gpio_direction_output(gpio + 2, 1);
+	}
+
 	return 0;
 }
 
-- 
1.6.3.3


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v3 3/3] omap3: beaglexm: power on DVI
@ 2011-01-06 19:54   ` Nishanth Menon
  0 siblings, 0 replies; 12+ messages in thread
From: Nishanth Menon @ 2011-01-06 19:54 UTC (permalink / raw)
  To: linux-arm-kernel

From: Koen Kooi <koen@beagleboard.org>

TFP410 DVI chip is used to provide display out.
this chip is controlled by 2 lines:
LDO which supplies the power is controlled over gpio + 2
and the enable of the chip itself is done over gpio + 1
NOTE: the LDO is necessary for LED, serial blocks as well.

GPIO + 1 was used to sense USB overcurrent in vanilla beagle

[nm at ti.com: helped split up the patch]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
 arch/arm/mach-omap2/board-omap3beagle.c |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index d628f5e..7c82730 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -293,9 +293,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
-
-	gpio_request(gpio + 1, "EHCI_nOC");
-	gpio_direction_input(gpio + 1);
+	if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) {
+		gpio_request(gpio + 1, "EHCI_nOC");
+		gpio_direction_input(gpio + 1);
+	}
 
 	/*
 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
@@ -317,6 +318,19 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
+	/*
+	 * gpio + 1 on Xm controls the TFP410's enable line (active low)
+	 * gpio + 2 control varies depending on the board rev as follows:
+	 * P7/P8 revisions(prototype): Camera EN
+	 * A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
+	 */
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+		gpio_request(gpio + 1, "nDVI_PWR_EN");
+		gpio_direction_output(gpio + 1, 0);
+		gpio_request(gpio + 2, "DVI_LDO_EN");
+		gpio_direction_output(gpio + 2, 1);
+	}
+
 	return 0;
 }
 
-- 
1.6.3.3

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
  2011-01-06 19:54 ` Nishanth Menon
@ 2011-01-06 19:57   ` Koen Kooi
  -1 siblings, 0 replies; 12+ messages in thread
From: Koen Kooi @ 2011-01-06 19:57 UTC (permalink / raw)
  To: Nishanth Menon; +Cc: l-o, l-a, Kevin, Tony

Thanks for splitting it up! Now I can work on the patches for xM rev C where the pins changed again :)

Op 6 jan 2011, om 20:54 heeft Nishanth Menon het volgende geschreven:

> Hi,
> As discussed in the threads:
> http://thread.gmane.org/gmane.linux.ports.arm.omap/47807/
> http://marc.info/?t=121540030800004&r=1&w=2
> 
> here is the split up series with commit message after discussion:
> http://www.beagleboard.org/irclogs/index.php?date=2011-01-06#T19:12:21
> 
> Koen Kooi (3):
>  omap3: beaglexm: fix EHCI power up GPIO dir
>  omap3: beaglexm: fix DVI reset GPIO
>  omap3: beaglexm: power on DVI
> 
> arch/arm/mach-omap2/board-omap3beagle.c |   37 ++++++++++++++++++++++++++----
> 1 files changed, 32 insertions(+), 5 deletions(-)
> 
> v3:
> 	split up the series, addressed review comments
> 
> v2: http://marc.info/?t=129276977900002&r=1&w=2
> 	Reenable the PMU stat LED
> v1: http://marc.info/?t=129172571000001&r=1&w=2
> 
> Regards,
> Nishanth Menon


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
@ 2011-01-06 19:57   ` Koen Kooi
  0 siblings, 0 replies; 12+ messages in thread
From: Koen Kooi @ 2011-01-06 19:57 UTC (permalink / raw)
  To: linux-arm-kernel

Thanks for splitting it up! Now I can work on the patches for xM rev C where the pins changed again :)

Op 6 jan 2011, om 20:54 heeft Nishanth Menon het volgende geschreven:

> Hi,
> As discussed in the threads:
> http://thread.gmane.org/gmane.linux.ports.arm.omap/47807/
> http://marc.info/?t=121540030800004&r=1&w=2
> 
> here is the split up series with commit message after discussion:
> http://www.beagleboard.org/irclogs/index.php?date=2011-01-06#T19:12:21
> 
> Koen Kooi (3):
>  omap3: beaglexm: fix EHCI power up GPIO dir
>  omap3: beaglexm: fix DVI reset GPIO
>  omap3: beaglexm: power on DVI
> 
> arch/arm/mach-omap2/board-omap3beagle.c |   37 ++++++++++++++++++++++++++----
> 1 files changed, 32 insertions(+), 5 deletions(-)
> 
> v3:
> 	split up the series, addressed review comments
> 
> v2: http://marc.info/?t=129276977900002&r=1&w=2
> 	Reenable the PMU stat LED
> v1: http://marc.info/?t=129172571000001&r=1&w=2
> 
> Regards,
> Nishanth Menon

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
  2011-01-06 19:54 ` Nishanth Menon
@ 2011-01-06 22:15   ` Kevin Hilman
  -1 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2011-01-06 22:15 UTC (permalink / raw)
  To: Nishanth Menon; +Cc: l-o, l-a, Tony, Koen Kooi

Nishanth Menon <nm@ti.com> writes:

> Hi,
> As discussed in the threads:
> http://thread.gmane.org/gmane.linux.ports.arm.omap/47807/
> http://marc.info/?t=121540030800004&r=1&w=2
>
> here is the split up series with commit message after discussion:
> http://www.beagleboard.org/irclogs/index.php?date=2011-01-06#T19:12:21
>
> Koen Kooi (3):
>   omap3: beaglexm: fix EHCI power up GPIO dir
>   omap3: beaglexm: fix DVI reset GPIO
>   omap3: beaglexm: power on DVI
>
>  arch/arm/mach-omap2/board-omap3beagle.c |   37 ++++++++++++++++++++++++++----
>  1 files changed, 32 insertions(+), 5 deletions(-)
>
> v3:
> 	split up the series, addressed review comments

Thanks, queueing for the .38-rc cycle.

Kevin

> v2: http://marc.info/?t=129276977900002&r=1&w=2
> 	Reenable the PMU stat LED
> v1: http://marc.info/?t=129172571000001&r=1&w=2
>
> Regards,
> Nishanth Menon

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
@ 2011-01-06 22:15   ` Kevin Hilman
  0 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2011-01-06 22:15 UTC (permalink / raw)
  To: linux-arm-kernel

Nishanth Menon <nm@ti.com> writes:

> Hi,
> As discussed in the threads:
> http://thread.gmane.org/gmane.linux.ports.arm.omap/47807/
> http://marc.info/?t=121540030800004&r=1&w=2
>
> here is the split up series with commit message after discussion:
> http://www.beagleboard.org/irclogs/index.php?date=2011-01-06#T19:12:21
>
> Koen Kooi (3):
>   omap3: beaglexm: fix EHCI power up GPIO dir
>   omap3: beaglexm: fix DVI reset GPIO
>   omap3: beaglexm: power on DVI
>
>  arch/arm/mach-omap2/board-omap3beagle.c |   37 ++++++++++++++++++++++++++----
>  1 files changed, 32 insertions(+), 5 deletions(-)
>
> v3:
> 	split up the series, addressed review comments

Thanks, queueing for the .38-rc cycle.

Kevin

> v2: http://marc.info/?t=129276977900002&r=1&w=2
> 	Reenable the PMU stat LED
> v1: http://marc.info/?t=129172571000001&r=1&w=2
>
> Regards,
> Nishanth Menon

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2011-01-06 22:15 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-06 19:54 [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes Nishanth Menon
2011-01-06 19:54 ` Nishanth Menon
2011-01-06 19:54 ` [PATCH v3 1/3] omap3: beaglexm: fix EHCI power up GPIO dir Nishanth Menon
2011-01-06 19:54   ` Nishanth Menon
2011-01-06 19:54 ` [PATCH v3 2/3] omap3: beaglexm: fix DVI reset GPIO Nishanth Menon
2011-01-06 19:54   ` Nishanth Menon
2011-01-06 19:54 ` [PATCH v3 3/3] omap3: beaglexm: power on DVI Nishanth Menon
2011-01-06 19:54   ` Nishanth Menon
2011-01-06 19:57 ` [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes Koen Kooi
2011-01-06 19:57   ` Koen Kooi
2011-01-06 22:15 ` Kevin Hilman
2011-01-06 22:15   ` Kevin Hilman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.