From: Alexander Hoogerhuis <alexh@ihatent.com>
To: Andrew Morton <akpm@digeo.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.5.70-mm6
Date: 08 Jun 2003 02:37:07 +0200 [thread overview]
Message-ID: <873cilz9os.fsf@lapper.ihatent.com> (raw)
In-Reply-To: <20030607151440.6982d8c6.akpm@digeo.com>
Andrew Morton <akpm@digeo.com> writes:
>
> [SNIP]
>
It builds nicely here and runs nicely so far, but my USB-drive still
blows up after a few gigs and I have this one when plugging it in:
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
spurious 8259A interrupt: IRQ7.
SCSI device sda: 490232832 512-byte hdwr sectors (250999 MB)
sda: cache data unavailable
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
devfs_mk_dir(scsi/host0/bus0/target0/lun0): could not append to dir: ea549820 "target0"
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
mvh,
A
--
Alexander Hoogerhuis | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE | +47 908 21 485
"You have zero privacy anyway. Get over it." --Scott McNealy
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Hoogerhuis <alexh@ihatent.com>
To: Andrew Morton <akpm@digeo.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.5.70-mm6
Date: 08 Jun 2003 02:37:07 +0200 [thread overview]
Message-ID: <873cilz9os.fsf@lapper.ihatent.com> (raw)
In-Reply-To: <20030607151440.6982d8c6.akpm@digeo.com>
Andrew Morton <akpm@digeo.com> writes:
>
> [SNIP]
>
It builds nicely here and runs nicely so far, but my USB-drive still
blows up after a few gigs and I have this one when plugging it in:
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
spurious 8259A interrupt: IRQ7.
SCSI device sda: 490232832 512-byte hdwr sectors (250999 MB)
sda: cache data unavailable
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
devfs_mk_dir(scsi/host0/bus0/target0/lun0): could not append to dir: ea549820 "target0"
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
mvh,
A
--
Alexander Hoogerhuis | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE | +47 908 21 485
"You have zero privacy anyway. Get over it." --Scott McNealy
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"aart@kvack.org"> aart@kvack.org </a>
next prev parent reply other threads:[~2003-06-08 0:23 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-07 22:14 2.5.70-mm6 Andrew Morton
2003-06-07 22:14 ` 2.5.70-mm6 Andrew Morton
2003-06-08 0:37 ` Alexander Hoogerhuis [this message]
2003-06-08 0:37 ` 2.5.70-mm6 Alexander Hoogerhuis
2003-06-08 0:56 ` 2.5.70-mm6 Andrew Morton
2003-06-08 0:56 ` 2.5.70-mm6 Andrew Morton
2003-06-08 1:13 ` 2.5.70-mm6 Alexander Hoogerhuis
2003-06-08 1:13 ` 2.5.70-mm6 Alexander Hoogerhuis
2003-06-08 12:25 ` 2.5.70-mm6 Christoph Hellwig
2003-06-08 12:25 ` 2.5.70-mm6 Christoph Hellwig
2003-06-08 12:09 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-08 12:09 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-08 15:56 ` [patch] 2.5.70-mm6: ethertap.c doesn't compile Adrian Bunk
2003-06-08 16:00 ` Arnaldo Carvalho de Melo
2003-06-08 21:41 ` Adrian Bunk
2003-06-08 22:52 ` 2.5.70-mm6 Pasi Savolainen
2003-06-08 23:17 ` [patch] 2.5.70-mm6: isp driver cleanups Adrian Bunk
2003-06-08 23:27 ` Andrew Morton
2003-06-08 23:24 ` 2.5.70-mm6 Joe
2003-06-09 17:45 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-09 17:45 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-09 17:39 ` 2.5.70-mm6 Martin J. Bligh
2003-06-09 17:39 ` 2.5.70-mm6 Martin J. Bligh
2003-06-09 18:19 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-09 18:19 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-09 18:51 ` 2.5.70-mm6 Martin J. Bligh
2003-06-09 18:51 ` 2.5.70-mm6 Martin J. Bligh
2003-06-09 19:42 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-09 19:42 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-09 20:04 ` 2.5.70-mm6 William Lee Irwin III
2003-06-10 8:54 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-10 8:54 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-10 9:20 ` 2.5.70-mm6 William Lee Irwin III
2003-06-10 9:20 ` 2.5.70-mm6 William Lee Irwin III
2003-06-10 11:31 ` 2.5.70-mm6 Mike Galbraith
2003-06-10 11:31 ` 2.5.70-mm6 Mike Galbraith
2003-06-10 11:41 ` 2.5.70-mm6 William Lee Irwin III
2003-06-10 11:41 ` 2.5.70-mm6 William Lee Irwin III
2003-06-10 11:51 ` Sharing Boottime allocated memory with user-space processes ZCane, Ed (Test Purposes)
2003-06-10 18:53 ` 2.5.70-mm6 Mike Galbraith
2003-06-10 18:53 ` 2.5.70-mm6 Mike Galbraith
2003-06-10 19:11 ` 2.5.70-mm6 William Lee Irwin III
2003-06-10 19:11 ` 2.5.70-mm6 William Lee Irwin III
2003-06-10 11:52 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-10 11:52 ` 2.5.70-mm6 Maciej Soltysiak
2003-06-09 20:08 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-09 20:08 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-09 20:14 ` 2.5.70-mm6 Martin J. Bligh
2003-06-09 20:14 ` 2.5.70-mm6 Martin J. Bligh
2003-06-09 21:09 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-09 21:09 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-10 9:56 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-10 9:56 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-09 18:39 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-09 18:39 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-09 18:06 ` 2.5.70-mm6 Alistair J Strachan
2003-06-09 18:06 ` 2.5.70-mm6 Alistair J Strachan
2003-06-09 18:36 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-09 18:36 ` 2.5.70-mm6 Felipe Alfaro Solana
2003-06-09 19:07 ` 2.5.70-mm6 Pasi Savolainen
2003-06-09 19:07 ` 2.5.70-mm6 Pasi Savolainen
2003-06-09 21:20 ` 2.5.70-mm6 Diego Calleja García
2003-06-09 21:40 ` 2.5.70-mm6 Andrew Morton
2003-06-10 12:10 ` 2.5.70-mm6 Grzegorz Jaskiewicz
2003-06-11 2:15 ` 2.5.70-mm6 Mingming Cao
2003-06-11 2:15 ` 2.5.70-mm6 Mingming Cao
2003-06-11 3:12 ` 2.5.70-mm6 Andrew Morton
2003-06-11 3:12 ` 2.5.70-mm6 Andrew Morton
2003-06-11 22:15 ` 2.5.70-mm6 Mingming Cao
2003-06-11 22:15 ` 2.5.70-mm6 Mingming Cao
2003-06-12 16:37 ` 2.5.70-mm6 Mingming Cao
2003-06-12 16:37 ` 2.5.70-mm6 Mingming Cao
2003-06-12 17:50 ` 2.5.70-mm6 Andrew Morton
2003-06-12 17:50 ` 2.5.70-mm6 Andrew Morton
2003-06-12 18:43 ` 2.5.70-mm6 Mingming Cao
2003-06-12 18:43 ` 2.5.70-mm6 Mingming Cao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=873cilz9os.fsf@lapper.ihatent.com \
--to=alexh@ihatent.com \
--cc=akpm@digeo.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.