* ath10k-firmware: QCA4019 hw1.0: Update 8devices Habanero specific BDFs
@ 2019-09-23 9:43 Robert Marko
2022-01-21 13:25 ` Kalle Valo
0 siblings, 1 reply; 6+ messages in thread
From: Robert Marko @ 2019-09-23 9:43 UTC (permalink / raw)
To: ath10k
[-- Attachment #1: Type: text/plain, Size: 1347 bytes --]
Hi,
I am currently working on the 8devices Habanero support for
OpenWrt. This
AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The
bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because
QCA doesn't provide special IDs for customers and seems to use the AP-DK
board-ids in the wifi firmware to change its behavior.
This update improves 5GHz radio.
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a QCA4019 based module
- one QCA4019 radio is used as 2.4GHz radio
- one QCA4019 radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- it was pulled from the 8devices OpenWrt fork
- it is based on latest version
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero
md5sum:
64d0817da715875483d323f2bb0c898c
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
md5sum:
56202ea33e96f16c65b75d464451c251
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Robert Marko
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Update 8devices Habanero specific BDFs
2019-09-23 9:43 ath10k-firmware: QCA4019 hw1.0: Update 8devices Habanero specific BDFs Robert Marko
@ 2022-01-21 13:25 ` Kalle Valo
2022-01-21 13:34 ` Robert Marko
0 siblings, 1 reply; 6+ messages in thread
From: Kalle Valo @ 2022-01-21 13:25 UTC (permalink / raw)
To: Robert Marko; +Cc: ath10k
Robert Marko <robimarko@gmail.com> writes:
> I am currently working on the 8devices Habanero support for
> OpenWrt. This
> AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The
> bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because
> QCA doesn't provide special IDs for customers and seems to use the AP-DK
> board-ids in the wifi firmware to change its behavior.
>
> This update improves 5GHz radio.
>
> Now to the questions from the wiki page [1]:
>
> * description for what hardware this is:
>
> - it is a QCA4019 based module
> - one QCA4019 radio is used as 2.4GHz radio
> - one QCA4019 radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you
> downloaded)
>
> - it was pulled from the 8devices OpenWrt fork
> - it is based on latest version
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
> - QCA4019 hw1.0
>
> + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero
> md5sum:
> 64d0817da715875483d323f2bb0c898c
>
> + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
> md5sum:
> 56202ea33e96f16c65b75d464451c251
>
> * attach the actual board file (board.bin)
>
> - The name of the files are equal to the id string in the board-2.bin
> (minus the ".bin")
Do note that it seems that only one board file contents was actually
changed, was that on purpose?
Thanks, added to QCA4019/hw1.0/board-2.bin:
New:
Changed:
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
Deleted:
0 board image(s) added, 1 changed, 0 deleted, 60 in total
https://github.com/kvalo/ath10k-firmware/commit/1fad4d7a4aab0bb7daaabd5324c2b87e438d9bac
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Update 8devices Habanero specific BDFs
2022-01-21 13:25 ` Kalle Valo
@ 2022-01-21 13:34 ` Robert Marko
2022-01-21 13:46 ` Kalle Valo
0 siblings, 1 reply; 6+ messages in thread
From: Robert Marko @ 2022-01-21 13:34 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k
On Fri, 21 Jan 2022 at 14:25, Kalle Valo <kvalo@kernel.org> wrote:
>
> Robert Marko <robimarko@gmail.com> writes:
>
> > I am currently working on the 8devices Habanero support for
> > OpenWrt. This
> > AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The
> > bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because
> > QCA doesn't provide special IDs for customers and seems to use the AP-DK
> > board-ids in the wifi firmware to change its behavior.
> >
> > This update improves 5GHz radio.
> >
> > Now to the questions from the wiki page [1]:
> >
> > * description for what hardware this is:
> >
> > - it is a QCA4019 based module
> > - one QCA4019 radio is used as 2.4GHz radio
> > - one QCA4019 radio is used as 5GHz radio
> >
> > * origin of the board file (did you create it yourself or where you
> > downloaded)
> >
> > - it was pulled from the 8devices OpenWrt fork
> > - it is based on latest version
> >
> > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> >
> > - QCA4019 hw1.0
> >
> > + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero
> > md5sum:
> > 64d0817da715875483d323f2bb0c898c
> >
> > + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
> > md5sum:
> > 56202ea33e96f16c65b75d464451c251
> >
> > * attach the actual board file (board.bin)
> >
> > - The name of the files are equal to the id string in the board-2.bin
> > (minus the ".bin")
>
> Do note that it seems that only one board file contents was actually
> changed, was that on purpose?
Yes, only the 5GHz radio had an update.
8devices released new BDF-s last year that fix the thermal readings.
Do you mind if I send the updated ones upstream?
Regards,
Robert
>
> Thanks, added to QCA4019/hw1.0/board-2.bin:
>
> New:
>
>
> Changed:
> bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
>
> Deleted:
>
> 0 board image(s) added, 1 changed, 0 deleted, 60 in total
>
> https://github.com/kvalo/ath10k-firmware/commit/1fad4d7a4aab0bb7daaabd5324c2b87e438d9bac
>
>
> --
> https://patchwork.kernel.org/project/linux-wireless/list/
>
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Update 8devices Habanero specific BDFs
2022-01-21 13:34 ` Robert Marko
@ 2022-01-21 13:46 ` Kalle Valo
0 siblings, 0 replies; 6+ messages in thread
From: Kalle Valo @ 2022-01-21 13:46 UTC (permalink / raw)
To: Robert Marko; +Cc: ath10k
Robert Marko <robimarko@gmail.com> writes:
> On Fri, 21 Jan 2022 at 14:25, Kalle Valo <kvalo@kernel.org> wrote:
>>
>> Robert Marko <robimarko@gmail.com> writes:
>>
>> > I am currently working on the 8devices Habanero support for
>> > OpenWrt. This
>> > AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The
>> > bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because
>> > QCA doesn't provide special IDs for customers and seems to use the AP-DK
>> > board-ids in the wifi firmware to change its behavior.
>> >
>> > This update improves 5GHz radio.
>> >
>> > Now to the questions from the wiki page [1]:
>> >
>> > * description for what hardware this is:
>> >
>> > - it is a QCA4019 based module
>> > - one QCA4019 radio is used as 2.4GHz radio
>> > - one QCA4019 radio is used as 5GHz radio
>> >
>> > * origin of the board file (did you create it yourself or where you
>> > downloaded)
>> >
>> > - it was pulled from the 8devices OpenWrt fork
>> > - it is based on latest version
>> >
>> > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>> >
>> > - QCA4019 hw1.0
>> >
>> > + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero
>> > md5sum:
>> > 64d0817da715875483d323f2bb0c898c
>> >
>> > + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
>> > md5sum:
>> > 56202ea33e96f16c65b75d464451c251
>> >
>> > * attach the actual board file (board.bin)
>> >
>> > - The name of the files are equal to the id string in the board-2.bin
>> > (minus the ".bin")
>>
>> Do note that it seems that only one board file contents was actually
>> changed, was that on purpose?
>
> Yes, only the 5GHz radio had an update.
Good, thanks for checking.
> 8devices released new BDF-s last year that fix the thermal readings.
>
> Do you mind if I send the updated ones upstream?
Sure, why not? My board file queue is just really long but I'm going
through it at the moment.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* ath10k-firmware: QCA4019 hw1.0: Update 8devices Habanero specific BDFs
@ 2023-03-08 12:38 Mantas
2023-03-17 11:45 ` Kalle Valo
0 siblings, 1 reply; 6+ messages in thread
From: Mantas @ 2023-03-08 12:38 UTC (permalink / raw)
To: ath10k
[-- Attachment #1: Type: text/plain, Size: 798 bytes --]
This updates 8devices Habanero BDF to fix temperature sensor readout.
* description for what hardware this is:
- it is a IPQ4019 based board
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- updated file myself [1]
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero
md5sum:
16b805bd273526cdae8650931ff7c24f
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
md5sum:
02f6f427acba54c19fd609045d097834
[1]
https://github.com/8devices/openwrt-8devices/commit/b908630864addfa32cd76c4c97dd0c0d79a7ce4a
[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Update 8devices Habanero specific BDFs
2023-03-08 12:38 Mantas
@ 2023-03-17 11:45 ` Kalle Valo
0 siblings, 0 replies; 6+ messages in thread
From: Kalle Valo @ 2023-03-17 11:45 UTC (permalink / raw)
To: Mantas; +Cc: ath10k
Mantas <mantas@8devices.com> writes:
> This updates 8devices Habanero BDF to fix temperature sensor readout.
>
> * description for what hardware this is:
>
> - it is a IPQ4019 based board
> - one QCA40xx radio is used as 2.4GHz radio
> - one QCA40xx radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you
> downloaded)
>
> - updated file myself [1]
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
> - QCA4019 hw1.0
> + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero
> md5sum:
> 16b805bd273526cdae8650931ff7c24f
> + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
> md5sum:
> 02f6f427acba54c19fd609045d097834
Thanks, added to QCA4019/hw1.0/board-2.bin:
New:
Changed:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
Deleted:
0 board image(s) added, 2 changed, 0 deleted, 126 in total
https://github.com/kvalo/ath10k-firmware/commit/df55e3a40d15fbdad3c3236ab6f23a672bcab6f6
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-03-17 11:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-23 9:43 ath10k-firmware: QCA4019 hw1.0: Update 8devices Habanero specific BDFs Robert Marko
2022-01-21 13:25 ` Kalle Valo
2022-01-21 13:34 ` Robert Marko
2022-01-21 13:46 ` Kalle Valo
-- strict thread matches above, loose matches on Subject: below --
2023-03-08 12:38 Mantas
2023-03-17 11:45 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.