From: arno@natisbad.org (Arnaud Ebalard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board
Date: Mon, 11 Nov 2013 21:53:55 +0100 [thread overview]
Message-ID: <874n7ifyn0.fsf@natisbad.org> (raw)
In-Reply-To: <52813F25.40703@gmail.com> (Sebastian Hesselbarth's message of "Mon, 11 Nov 2013 21:33:41 +0100")
Hi Sebastian.
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> writes:
>> + serial at 12000 {
>> + clocks = <&coreclk 0>;
>> + status = "okay";
>> + };
>
> For your possible cleanup later: move clocks = <&coreclk 0> to
> armada-370-xp.dtsi and remove this then.
>
> Also for cleanup later: It would be great if most SoC nodes get
> a node label. That way you can just write:
>
> uart0: { status = "okay" };
>
> without replaying node hierarchy over and over again.
I will keep that in mind for later cleanups. Regarding the nits, as you
took the time to report those, I will send a v3 fixing them tomorrow.
Cheers,,
a+
WARNING: multiple messages have this Message-ID (diff)
From: arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org (Arnaud Ebalard)
To: Sebastian Hesselbarth
<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
Gregory Clement
<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Ezequiel Garcia
<ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Thomas Petazzoni
<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
Subject: Re: [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board
Date: Mon, 11 Nov 2013 21:53:55 +0100 [thread overview]
Message-ID: <874n7ifyn0.fsf@natisbad.org> (raw)
In-Reply-To: <52813F25.40703-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> (Sebastian Hesselbarth's message of "Mon, 11 Nov 2013 21:33:41 +0100")
Hi Sebastian.
Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> writes:
>> + serial@12000 {
>> + clocks = <&coreclk 0>;
>> + status = "okay";
>> + };
>
> For your possible cleanup later: move clocks = <&coreclk 0> to
> armada-370-xp.dtsi and remove this then.
>
> Also for cleanup later: It would be great if most SoC nodes get
> a node label. That way you can just write:
>
> uart0: { status = "okay" };
>
> without replaying node hierarchy over and over again.
I will keep that in mind for later cleanups. Regarding the nits, as you
took the time to report those, I will send a v3 fixing them tomorrow.
Cheers,,
a+
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-11-11 20:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-11 20:01 [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board Arnaud Ebalard
2013-11-11 20:01 ` Arnaud Ebalard
2013-11-11 20:33 ` Sebastian Hesselbarth
2013-11-11 20:33 ` Sebastian Hesselbarth
2013-11-11 20:53 ` Arnaud Ebalard [this message]
2013-11-11 20:53 ` Arnaud Ebalard
-- strict thread matches above, loose matches on Subject: below --
2013-11-12 19:46 Arnaud Ebalard
2013-11-12 19:46 ` Arnaud Ebalard
2013-11-12 20:11 ` Jason Cooper
2013-11-12 20:11 ` Jason Cooper
2013-11-12 20:53 ` Arnaud Ebalard
2013-11-12 20:53 ` Arnaud Ebalard
2013-11-24 3:49 ` Jason Cooper
2013-11-24 3:49 ` Jason Cooper
2013-11-24 11:52 ` Arnaud Ebalard
2013-11-24 11:52 ` Arnaud Ebalard
2013-11-24 13:02 ` Jason Cooper
2013-11-24 13:02 ` Jason Cooper
2013-11-24 14:09 ` Arnaud Ebalard
2013-11-24 14:09 ` Arnaud Ebalard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874n7ifyn0.fsf@natisbad.org \
--to=arno@natisbad.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.