From: Kevin Hilman <khilman@ti.com>
To: Rajendra Nayak <rnayak@ti.com>
Cc: Roger Quadros <rogerq@ti.com>,
balbi@ti.com, "J, KEERTHY" <j-keerthy@ti.com>,
Tony Lindgren <tony@atomide.com>,
lm-sensors@lm-sensors.org, vishwanath.bs@ti.com,
linux-omap@vger.kernel.org, b-cousson@ti.com,
Russell King <linux@arm.linux.org.uk>,
Linux ARM Kernel Mailing List
<linux-arm-kernel@lists.infradead.org>,
khali@linux-fr.org, guenter.roeck@ericsson.com
Subject: Re: [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver
Date: Mon, 22 Aug 2011 16:58:32 -0700 [thread overview]
Message-ID: <874o19gfrr.fsf@ti.com> (raw)
In-Reply-To: <4E449D65.9000004@ti.com> (Rajendra Nayak's message of "Fri, 12 Aug 2011 08:56:29 +0530")
Rajendra Nayak <rnayak@ti.com> writes:
[...]
> FWIK, its a one time requirement to set the clock rate to the
> right rate the device can operate in based on what a platform
> supports.
Except $SUBJECT patch hard-codes the clock rate for all platforms in the
driver.
If the clock rate is to be platform-specific, it should be done in
platform-specific code.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@ti.com>
To: Rajendra Nayak <rnayak@ti.com>
Cc: Roger Quadros <rogerq@ti.com>,
balbi@ti.com, "J, KEERTHY" <j-keerthy@ti.com>,
Tony Lindgren <tony@atomide.com>,
lm-sensors@lm-sensors.org, vishwanath.bs@ti.com,
linux-omap@vger.kernel.org, b-cousson@ti.com,
Russell King <linux@arm.linux.org.uk>,
Linux ARM Kernel Mailing List
<linux-arm-kernel@lists.infradead.org>,
khali@linux-fr.org, guenter.roeck@ericsson.com
Subject: Re: [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature
Date: Mon, 22 Aug 2011 23:58:32 +0000 [thread overview]
Message-ID: <874o19gfrr.fsf@ti.com> (raw)
In-Reply-To: <4E449D65.9000004@ti.com> (Rajendra Nayak's message of "Fri, 12 Aug 2011 08:56:29 +0530")
Rajendra Nayak <rnayak@ti.com> writes:
[...]
> FWIK, its a one time requirement to set the clock rate to the
> right rate the device can operate in based on what a platform
> supports.
Except $SUBJECT patch hard-codes the clock rate for all platforms in the
driver.
If the clock rate is to be platform-specific, it should be done in
platform-specific code.
Kevin
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: khilman@ti.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver
Date: Mon, 22 Aug 2011 16:58:32 -0700 [thread overview]
Message-ID: <874o19gfrr.fsf@ti.com> (raw)
In-Reply-To: <4E449D65.9000004@ti.com> (Rajendra Nayak's message of "Fri, 12 Aug 2011 08:56:29 +0530")
Rajendra Nayak <rnayak@ti.com> writes:
[...]
> FWIK, its a one time requirement to set the clock rate to the
> right rate the device can operate in based on what a platform
> supports.
Except $SUBJECT patch hard-codes the clock rate for all platforms in the
driver.
If the clock rate is to be platform-specific, it should be done in
platform-specific code.
Kevin
next prev parent reply other threads:[~2011-08-22 23:58 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-10 12:25 [RFC PATCH 0/6] OMAP4: Temperature sensor driver Keerthy
2011-08-10 12:37 ` [lm-sensors] " Keerthy
2011-08-10 12:25 ` [RFC PATCH 1/6] OMAP4: Clock: Associate clocks for OMAP temperature sensor Keerthy
2011-08-10 12:37 ` [lm-sensors] [RFC PATCH 1/6] OMAP4: Clock: Associate clocks for Keerthy
2011-08-10 12:25 ` [RFC PATCH 2/6] OMAP4: Adding the temperature sensor register set bit fields Keerthy
2011-08-10 12:37 ` [lm-sensors] [RFC PATCH 2/6] OMAP4: Adding the temperature sensor Keerthy
2011-08-10 12:25 ` [RFC PATCH 3/6] OMAP4: Hwmod: OMAP " Keerthy
2011-08-10 12:37 ` [lm-sensors] " Keerthy
2011-08-10 12:25 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support Keerthy
2011-08-10 12:37 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device Keerthy
2011-08-10 12:36 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support Felipe Balbi
2011-08-10 12:36 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device Felipe Balbi
2011-08-10 12:41 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support Tony Lindgren
2011-08-10 12:41 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device Tony Lindgren
2011-08-10 12:48 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support Felipe Balbi
2011-08-10 12:48 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device Felipe Balbi
2011-08-10 14:17 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support Cousson, Benoit
2011-08-10 14:17 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device Cousson, Benoit
2011-08-10 21:37 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support Felipe Balbi
2011-08-10 21:37 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device Felipe Balbi
2011-08-11 2:40 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support J, KEERTHY
2011-08-11 2:52 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device J, KEERTHY
2011-08-11 10:30 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support Felipe Balbi
2011-08-11 10:30 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device Felipe Balbi
2011-08-11 11:01 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support J, KEERTHY
2011-08-11 11:13 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device J, KEERTHY
2011-08-11 14:05 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support Felipe Balbi
2011-08-11 14:05 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device Felipe Balbi
2011-08-11 14:15 ` [RFC PATCH 4/6] OMAP4: Temperature sensor device support J, KEERTHY
2011-08-11 14:27 ` [lm-sensors] [RFC PATCH 4/6] OMAP4: Temperature sensor device J, KEERTHY
2011-08-10 12:25 ` [RFC PATCH 5/6] OMAP4460: Temperature sensor data Keerthy
2011-08-10 12:37 ` [lm-sensors] " Keerthy
2011-08-10 12:37 ` Felipe Balbi
2011-08-10 12:37 ` [lm-sensors] " Felipe Balbi
2011-08-10 15:08 ` J, KEERTHY
2011-08-10 15:20 ` [lm-sensors] " J, KEERTHY
2011-08-10 12:25 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Keerthy
2011-08-10 12:37 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Keerthy
2011-08-10 12:46 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Felipe Balbi
2011-08-10 12:46 ` Felipe Balbi
2011-08-10 12:46 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Felipe Balbi
2011-08-11 9:57 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-11 10:09 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature J, KEERTHY
2011-08-11 9:57 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-11 10:36 ` Felipe Balbi
2011-08-11 10:36 ` Felipe Balbi
2011-08-11 10:36 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Felipe Balbi
2011-08-11 13:00 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-11 13:12 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature J, KEERTHY
2011-08-11 13:00 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-11 14:12 ` Felipe Balbi
2011-08-11 14:12 ` Felipe Balbi
2011-08-11 14:12 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Felipe Balbi
2011-08-11 14:25 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Rajendra Nayak
2011-08-11 14:37 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Rajendra Nayak
2011-08-11 14:25 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Rajendra Nayak
2011-08-11 14:32 ` J, KEERTHY
2011-08-11 14:44 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature J, KEERTHY
2011-08-11 14:32 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-11 18:54 ` Felipe Balbi
2011-08-11 18:54 ` Felipe Balbi
2011-08-11 18:54 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Felipe Balbi
2011-08-11 18:55 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Felipe Balbi
2011-08-11 18:55 ` Felipe Balbi
2011-08-11 18:55 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Felipe Balbi
2011-08-11 21:37 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Roger Quadros
2011-08-11 21:37 ` Roger Quadros
2011-08-11 21:37 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Roger Quadros
2011-08-12 1:02 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-12 1:14 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature J, KEERTHY
2011-08-12 1:02 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-12 3:26 ` Rajendra Nayak
2011-08-12 3:38 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Rajendra Nayak
2011-08-12 3:26 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Rajendra Nayak
2011-08-12 8:44 ` Felipe Balbi
2011-08-12 8:44 ` Felipe Balbi
2011-08-12 8:44 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Felipe Balbi
2011-08-22 23:58 ` Kevin Hilman [this message]
2011-08-22 23:58 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Kevin Hilman
2011-08-22 23:58 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Kevin Hilman
2011-08-23 4:18 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Rajendra Nayak
2011-08-23 4:30 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Rajendra Nayak
2011-08-23 4:18 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Rajendra Nayak
2011-08-23 6:42 ` J, KEERTHY
2011-08-23 6:54 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature J, KEERTHY
2011-08-23 6:42 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-23 17:15 ` Kevin Hilman
2011-08-23 17:15 ` Kevin Hilman
2011-08-23 17:15 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Kevin Hilman
2011-08-24 4:07 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Rajendra Nayak
2011-08-24 4:19 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Rajendra Nayak
2011-08-24 4:07 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Rajendra Nayak
2011-08-11 16:38 ` Guenter Roeck
2011-08-11 16:38 ` Guenter Roeck
2011-08-11 16:38 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Guenter Roeck
2011-08-10 16:35 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver R, Durgadoss
2011-08-10 16:47 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die R, Durgadoss
2011-08-15 6:22 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-15 6:34 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature J, KEERTHY
2011-08-17 10:37 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-17 10:49 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature J, KEERTHY
2011-08-17 13:45 ` [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Guenter Roeck
2011-08-17 13:45 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Guenter Roeck
2011-08-17 15:03 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver J, KEERTHY
2011-08-17 15:15 ` [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature J, KEERTHY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874o19gfrr.fsf@ti.com \
--to=khilman@ti.com \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=guenter.roeck@ericsson.com \
--cc=j-keerthy@ti.com \
--cc=khali@linux-fr.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=lm-sensors@lm-sensors.org \
--cc=rnayak@ti.com \
--cc=rogerq@ti.com \
--cc=tony@atomide.com \
--cc=vishwanath.bs@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.