All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@ti.com>
To: Carlos Chinea <carlos.chinea@nokia.com>
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [RFC PATCHv5 2/7] HSI: omap_ssi: Introducing OMAP SSI driver
Date: Mon, 13 Jun 2011 13:21:59 -0700	[thread overview]
Message-ID: <874o3tmqhk.fsf@ti.com> (raw)
In-Reply-To: <1307713124-3946-3-git-send-email-carlos.chinea@nokia.com> (Carlos Chinea's message of "Fri, 10 Jun 2011 16:38:39 +0300")

Carlos Chinea <carlos.chinea@nokia.com> writes:

> Introduces the OMAP SSI driver in the kernel.
>
> The Synchronous Serial Interface (SSI) is a legacy version
> of HSI. As in the case of HSI, it is mainly used to connect
> Application engines (APE) with cellular modem engines (CMT)
> in cellular handsets.
>
> It provides a multichannel, full-duplex, multi-core communication
> with no reference clock. The OMAP SSI block is capable of reaching
> speeds of 110 Mbit/s.
>
> Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
> ---
>  arch/arm/mach-omap2/ssi.c             |  134 +++
>  arch/arm/plat-omap/include/plat/ssi.h |  204 ++++
>  drivers/hsi/controllers/omap_ssi.c    | 1852 +++++++++++++++++++++++++++++++++
>  3 files changed, 2190 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/ssi.c
>  create mode 100644 arch/arm/plat-omap/include/plat/ssi.h
>  create mode 100644 drivers/hsi/controllers/omap_ssi.c
>
> diff --git a/arch/arm/mach-omap2/ssi.c b/arch/arm/mach-omap2/ssi.c
> new file mode 100644
> index 0000000..e822a77
> --- /dev/null
> +++ b/arch/arm/mach-omap2/ssi.c
> @@ -0,0 +1,134 @@
> +/*
> + * linux/arch/arm/mach-omap2/ssi.c

Minor: Please don't include filenames in the comments.  Files tend to move
around and these comments don't get updated.

> + * Copyright (C) 2010 Nokia Corporation. All rights reserved.
> + *
> + * Contact: Carlos Chinea <carlos.chinea@nokia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +#include <plat/omap-pm.h>
> +#include <plat/ssi.h>
> +
> +static struct omap_ssi_platform_data ssi_pdata = {
> +	.num_ports			= SSI_NUM_PORTS,
> +	.get_dev_context_loss_count	= omap_pm_get_dev_context_loss_count,
> +};
> +
> +static struct resource ssi_resources[] = {
> +	/* SSI controller */
> +	[0] = {
> +		.start	= 0x48058000,
> +		.end	= 0x48058fff,
> +		.name	= "omap_ssi_sys",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	/* GDD */
> +	[1] = {
> +		.start	= 0x48059000,
> +		.end	= 0x48059fff,
> +		.name	= "omap_ssi_gdd",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[2] = {
> +		.start	= 71,
> +		.end	= 71,
> +		.name	= "ssi_gdd",
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +	/* SSI port 1 */
> +	[3] = {
> +		.start	= 0x4805a000,
> +		.end	= 0x4805a7ff,
> +		.name	= "omap_ssi_sst1",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[4] = {
> +		.start	= 0x4805a800,
> +		.end	= 0x4805afff,
> +		.name	= "omap_ssi_ssr1",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[5] = {
> +		.start	= 67,
> +		.end	= 67,
> +		.name	= "ssi_p1_mpu_irq0",
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +	[6] = {
> +		.start	= 68,
> +		.end	= 68,
> +		.name	= "ssi_p1_mpu_irq1",
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +	[7] = {
> +		.start	= 0,
> +		.end	= 0,
> +		.name	= "ssi_p1_cawake",
> +		.flags	= IORESOURCE_IRQ | IORESOURCE_UNSET,
> +	},
> +};
> +
> +static struct platform_device ssi_pdev = {
> +	.name		= "omap_ssi",
> +	.id		= 0,
> +	.num_resources	= ARRAY_SIZE(ssi_resources),
> +	.resource	= ssi_resources,
> +	.dev		= {
> +				.platform_data	= &ssi_pdata,
> +	},
> +};

omap_hwmod has all the base address and IRQ data, will construct the
struct resources and the platform_devices for you.  Please use
omap_hwmod + omap_device for this part of the code.

Kevin



  parent reply	other threads:[~2011-06-13 20:22 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-10 13:38 [RFC PATCHv5 0/7] HSI framework and drivers Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 1/7] HSI: hsi: Introducing HSI framework Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 2/7] HSI: omap_ssi: Introducing OMAP SSI driver Carlos Chinea
2011-06-13 13:21   ` Tony Lindgren
2011-06-14 12:09     ` Carlos Chinea
2011-06-13 20:21   ` Kevin Hilman [this message]
2011-06-14 12:12     ` Carlos Chinea
2011-06-15 15:37       ` Kevin Hilman
2011-06-10 13:38 ` [RFC PATCHv5 3/7] HSI: omap_ssi: Add OMAP SSI to the kernel configuration Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 4/7] HSI: hsi_char: Add HSI char device driver Carlos Chinea
2011-06-22 19:37   ` Sjur Brændeland
2011-06-23  9:12     ` Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 5/7] HSI: hsi_char: Add HSI char device kernel configuration Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 6/7] HSI: Add HSI API documentation Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 7/7] HSI: hsi_char: Update ioctl-number.txt Carlos Chinea
2011-06-14  9:35 ` [RFC PATCHv5 0/7] HSI framework and drivers Alan Cox
2011-06-15  9:27   ` Andras Domokos
2011-06-22 19:11 ` [RFC PATCHv5 1/7] HSI: hsi: Introducing HSI framework Sjur Brændeland
2011-06-22 19:25   ` Linus Walleij
2011-06-23 13:08   ` Carlos Chinea
2011-06-28 13:05     ` Sjur BRENDELAND
2011-06-28 13:05       ` Sjur BRENDELAND
2011-07-22 10:43       ` Carlos Chinea
2011-07-22 11:01         ` Felipe Balbi
2011-07-22 11:51           ` Carlos Chinea
2011-07-22 12:05             ` Felipe Balbi
2011-07-22 13:02               ` Carlos Chinea
2011-07-24 21:56               ` Sjur Brændeland
2011-07-25  9:17                 ` Carlos Chinea
2011-07-25  9:17                   ` Carlos Chinea
2011-10-20 12:57 ` [RFC PATCHv5 0/7] HSI framework and drivers Sebastian Reichel
2011-10-21  9:54   ` Linus Walleij
2011-10-21 10:28     ` Carlos Chinea
2011-10-21 12:19       ` Linus Walleij
2011-10-21 13:36       ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=874o3tmqhk.fsf@ti.com \
    --to=khilman@ti.com \
    --cc=carlos.chinea@nokia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.