* [Buildroot] serial console and wpa_supplicant
@ 2010-05-06 22:40 mohamed mohamed nour eldin
2010-05-07 8:09 ` mohamed mohamed nour eldin
2010-05-07 8:16 ` Peter Korsgaard
0 siblings, 2 replies; 6+ messages in thread
From: mohamed mohamed nour eldin @ 2010-05-06 22:40 UTC (permalink / raw)
To: buildroot
hi,
first of all, we want to thank u very much for developing this fantastic
tool which helped us a lot in building a linux filesystem
we (my team & i) are working on our graduation project which is an e-book
reader device running embedded linux
so we used buildroot for building our system
we are facing 2 problems by now:
1- when we connect the board to a pc through serial port, the loading is
shown normally on the super terminal (minicom) but at the end of the loading
we wait for a console to show up, but nothing happens, sohow to open a
serial console
2- when building a systen with wpa_supplicant package, we face an error: ld
can't find -lnl, although libnl was built successfully
thanks a lot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100507/b7967847/attachment-0001.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] serial console and wpa_supplicant
2010-05-06 22:40 [Buildroot] serial console and wpa_supplicant mohamed mohamed nour eldin
@ 2010-05-07 8:09 ` mohamed mohamed nour eldin
2010-05-07 8:16 ` Peter Korsgaard
1 sibling, 0 replies; 6+ messages in thread
From: mohamed mohamed nour eldin @ 2010-05-07 8:09 UTC (permalink / raw)
To: buildroot
hi, i'm now able to start a console on the super terminal,
so what about the second problem (wpa_supplicant)?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100507/c58a1b5c/attachment.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] serial console and wpa_supplicant
2010-05-06 22:40 [Buildroot] serial console and wpa_supplicant mohamed mohamed nour eldin
2010-05-07 8:09 ` mohamed mohamed nour eldin
@ 2010-05-07 8:16 ` Peter Korsgaard
2010-05-07 8:27 ` mohamed mohamed nour eldin
1 sibling, 1 reply; 6+ messages in thread
From: Peter Korsgaard @ 2010-05-07 8:16 UTC (permalink / raw)
To: buildroot
>>>>> "mohamed" == mohamed mohamed nour eldin <eng.mohamed.nour.eldin@gmail.com> writes:
mohamed> hi,
mohamed> first of all, we want to thank u very much for developing this
mohamed> fantastic tool which helped us a lot in building a linux
You are welcome.
mohamed> 2- when building a systen with wpa_supplicant package, we face
mohamed> an error: ld can't find -lnl, although libnl was built
mohamed> successfully
Could you provide more details, please?
What buildroot version are you using? There was a wpa_supplicant fix
yesterday for external toolchains.
Please post your buildroot .config file, so I can try to reproduce the
problem.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] serial console and wpa_supplicant
2010-05-07 8:16 ` Peter Korsgaard
@ 2010-05-07 8:27 ` mohamed mohamed nour eldin
2010-05-07 8:43 ` Peter Korsgaard
0 siblings, 1 reply; 6+ messages in thread
From: mohamed mohamed nour eldin @ 2010-05-07 8:27 UTC (permalink / raw)
To: buildroot
thanks a lot Peter,
i'm using buildroot-2010.02 with an external toolchain built by
crosstool-ng-1.4.2
here's the .config
#
# Automatically generated make config: don't edit
# Thu May 6 23:16:49 2010
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="2010.02"
# BR2_alpha is not set
BR2_arm=y
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_cris is not set
# BR2_ia64 is not set
# BR2_i386 is not set
# BR2_m68k is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_nios2 is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_sparc64 is not set
# BR2_x86_64 is not set
# BR2_xtensa is not set
# BR2_generic_arm is not set
# BR2_arm7tdmi is not set
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
BR2_arm920t=y
# BR2_arm922t is not set
# BR2_arm926t is not set
# BR2_arm10t is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set
#
# cortex-A8 needs gcc >= 4.4.x
#
# BR2_cortex_a8 is not set
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_TYPE="ARM920T"
BR2_ARM_EABI=y
# BR2_ARM_OABI is not set
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="arm920t"
BR2_GCC_TARGET_ARCH="armv4t"
BR2_GCC_TARGET_ABI="aapcs-linux"
#
# Target options
#
#
# Preset Devices
#
# BR2_TARGET_ARMLTD is not set
# BR2_TARGET_ATMEL is not set
# BR2_TARGET_KWIKBYTE is not set
BR2_TARGET_GENERIC_HOSTNAME="buildroot"
BR2_TARGET_GENERIC_ISSUE="Welcome to Ebook Reader"
BR2_TARGET_GENERIC_GETTY=y
# BR2_TARGET_GENERIC_GETTY_NONE is not set
BR2_TARGET_GENERIC_GETTY_TTYS0=y
# BR2_TARGET_GENERIC_GETTY_TTYS1 is not set
# BR2_TARGET_GENERIC_GETTY_TTYS2 is not set
# BR2_TARGET_GENERIC_GETTY_TTYS3 is not set
# BR2_TARGET_GENERIC_GETTY_TTYAMA0 is not set
# BR2_TARGET_GENERIC_GETTY_TTYAMA1 is not set
# BR2_TARGET_GENERIC_GETTY_TTYAMA2 is not set
# BR2_TARGET_GENERIC_GETTY_TTYAMA3 is not set
# BR2_TARGET_GENERIC_GETTY_TTYSAC0 is not set
# BR2_TARGET_GENERIC_GETTY_TTYSAC1 is not set
# BR2_TARGET_GENERIC_GETTY_TTYSAC2 is not set
# BR2_TARGET_GENERIC_GETTY_TTYSAC3 is not set
# BR2_TARGET_GENERIC_GETTY_TTYMXC0 is not set
# BR2_TARGET_GENERIC_GETTY_TTYMXC1 is not set
# BR2_TARGET_GENERIC_GETTY_TTYMXC2 is not set
# BR2_TARGET_GENERIC_GETTY_TTYUL0 is not set
# BR2_TARGET_GENERIC_GETTY_TTYUL1 is not set
# BR2_TARGET_GENERIC_GETTY_TTYUL2 is not set
# BR2_TARGET_GENERIC_GETTY_TTYUL3 is not set
# BR2_TARGET_GENERIC_GETTY_TTYPSC0 is not set
# BR2_TARGET_GENERIC_GETTY_TTYPSC1 is not set
# BR2_TARGET_GENERIC_GETTY_TTYPSC2 is not set
# BR2_TARGET_GENERIC_GETTY_TTYPSC3 is not set
# BR2_TARGET_GENERIC_GETTY_TTYCPM0 is not set
# BR2_TARGET_GENERIC_GETTY_TTYCPM1 is not set
# BR2_TARGET_GENERIC_GETTY_TTYCPM2 is not set
# BR2_TARGET_GENERIC_GETTY_TTYCPM3 is not set
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
#
# Build options
#
BR2_WGET="wget --passive-ftp -nd"
BR2_SVN_CO="svn co"
BR2_SVN_UP="svn up"
BR2_BZR_CO="bzr co"
BR2_BZR_UP="bzr up"
BR2_GIT="git clone"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_COPYTO=""
#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://buildroot.net/downloads/sources/"
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
BR2_STAGING_DIR="$(BASE_DIR)/staging"
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibcgnueabi"
BR2_JLEVEL=2
# BR2_PREFER_IMA is not set
# BR2_DEPRECATED is not set
BR2_RECENT=y
BR2_CONFIG_CACHE=y
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_MANPAGES is not set
# BR2_HAVE_INFOPAGES is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set
BR2_UPDATE_CONFIG=y
#
# Toolchain
#
# BR2_TOOLCHAIN_BUILDROOT is not set
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_UCLIBC=y
# BR2_TOOLCHAIN_EXTERNAL_GLIBC is not set
BR2_TOOLCHAIN_EXTERNAL_STRIP=y
#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set
#
# Common Toolchain Options
#
BR2_LARGEFILE=y
# BR2_INET_IPV6 is not set
BR2_INET_RPC=y
# BR2_ENABLE_LOCALE is not set
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_USE_WCHAR=y
BR2_PREFER_SOFT_FLOAT=y
BR2_SOFT_FLOAT=y
# BR2_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_PTHREADS_NATIVE is not set
# BR2_PROGRAM_INVOCATION is not set
BR2_GCC_CROSS_CXX=y
BR2_INSTALL_LIBSTDCPP=y
BR2_TARGET_OPTIMIZATION="-Os -pipe"
BR2_TOOLCHAIN_EXTERNAL_PATH="/usr/local/xtools/arm-unknown-linux-uclibcgnueabi"
BR2_TOOLCHAIN_EXTERNAL_PREFIX="$(ARCH)-linux"
#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_12_X is not set
BR2_BUSYBOX_VERSION_1_13_X=y
# BR2_BUSYBOX_VERSION_1_14_X is not set
# BR2_BUSYBOX_VERSION_1_15_X is not set
# BR2_BUSYBOX_VERSION_1_16_X is not set
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.13.4"
BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
BR2_PACKAGE_BUSYBOX_CONFIG="/media/E/Mini2440/busybox-1.13.3/.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
# BR2_PACKAGE_BUSYBOX_SKELETON is not set
#
# The minimum needed to build a uClibc development system
#
BR2_PACKAGE_BASH=y
# BR2_PACKAGE_BZIP2 is not set
#
# coreutils requires a toolchain with WCHAR and PROGRAM_INVOCATION support
#
# BR2_PACKAGE_DIFFUTILS is not set
# BR2_PACKAGE_FINDUTILS is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GAWK is not set
#
# native toolchain needs development files in target filesystem
#
# BR2_PACKAGE_GREP is not set
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_PATCH is not set
# BR2_PACKAGE_SED is not set
#
# tar requires a toolchain with WCHAR and PROGRAM_INVOCATION support
#
#
# Other development stuff
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_CCACHE_TARGET is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
# BR2_PACKAGE_LIBGMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_OPROFILE is not set
# BR2_PACKAGE_PKG_CONFIG is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_PCRE is not set
# BR2_PACKAGE_INTLTOOL is not set
#
# Other stuff
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_BOOTUTILS is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_DASH is not set
# BR2_PACKAGE_ENCHANT is not set
BR2_PACKAGE_FILE=y
# BR2_PACKAGE_GAMIN is not set
# BR2_PACKAGE_ICU is not set
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LESS is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
BR2_PACKAGE_LIBICONV=y
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
BR2_PACKAGE_LIBOIL=y
# BR2_PACKAGE_LIBSYSFS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
BR2_PACKAGE_MEMSTAT=y
# BR2_PACKAGE_MODULE_INIT_TOOLS is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_PROCPS is not set
# BR2_PACKAGE_PSMISC is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set
# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
# BR2_PACKAGE_STRACE is not set
BR2_PACKAGE_SUDO=y
# BR2_PACKAGE_SYSKLOGD is not set
# BR2_PACKAGE_SYSVINIT is not set
# BR2_PACKAGE_UTIL-LINUX is not set
# BR2_PACKAGE_WHICH is not set
#
# Database
#
# BR2_PACKAGE_MYSQL_CLIENT is not set
BR2_PACKAGE_SQLITE=y
# BR2_PACKAGE_SQLITE_READLINE is not set
#
# Text editors
#
# BR2_PACKAGE_ED is not set
BR2_PACKAGE_NANO=y
# BR2_PACKAGE_UEMACS is not set
# BR2_PACKAGE_VIM is not set
#
# Networking
#
#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BOA is not set
# BR2_PACKAGE_BIND is not set
# BR2_PACKAGE_BMON is not set
# BR2_PACKAGE_BRIDGE is not set
# BR2_PACKAGE_CTORRENT is not set
# BR2_PACKAGE_ISC_DHCP is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_HOSTAPD is not set
# BR2_PACKAGE_IFPLUGD is not set
# BR2_PACKAGE_IPERF is not set
#
# iproute2 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_IPSEC_TOOLS is not set
# BR2_PACKAGE_IPTABLES is not set
BR2_PACKAGE_IW=y
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_L2TP is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
BR2_PACKAGE_LIBCURL=y
BR2_PACKAGE_CURL=y
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
BR2_PACKAGE_LIBNL=y
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBSOUP is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MIIDIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_NETCAT is not set
# BR2_PACKAGE_NETKITBASE is not set
# BR2_PACKAGE_NETKITTELNET is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set
# BR2_PACKAGE_NFS_UTILS is not set
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
BR2_PACKAGE_OPENSSL=y
# BR2_PACKAGE_OPENSSL_BIN is not set
# BR2_PACKAGE_OPENSSL_ENGINES is not set
# BR2_PACKAGE_OPENVPN is not set
# BR2_PACKAGE_PORTMAP is not set
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_RP_PPPOE is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SER2NET is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SPAWN_FCGI is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_TFTPD is not set
# BR2_PACKAGE_THTTPD is not set
# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
# BR2_PACKAGE_UDPCAST is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WGET is not set
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WPA_SUPPLICANT=y
# BR2_PACKAGE_WPA_SUPPLICANT_EAP is not set
# BR2_PACKAGE_WPA_SUPPLICANT_CLI is not set
# BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE is not set
#
# Hardware handling / blockdevices and filesystem maintenance
#
# BR2_PACKAGE_DBUS is not set
# BR2_PACKAGE_DEVMEM2 is not set
# BR2_PACKAGE_DMRAID is not set
# BR2_PACKAGE_DOSFSTOOLS is not set
# BR2_PACKAGE_E2FSPROGS is not set
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_LIBFUSE is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_GVFS is not set
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HDPARM is not set
# BR2_PACKAGE_HOTPLUG is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_NTFSPROGS is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SFDISK is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_UDEV is not set
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USBMOUNT is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set
#
# Audio and video libraries and applications
#
# BR2_PACKAGE_ALSA_LIB is not set
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_FLAC is not set
BR2_PACKAGE_GSTREAMER=y
BR2_PACKAGE_GSTREAMER_LIBXML2=y
BR2_PACKAGE_GST_PLUGINS_BASE=y
#
# dependency-less plugins
#
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_ADDER is not set
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_APP is not set
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_AUDIOCONVERT=y
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_AUDIORATE is not set
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_AUDIORESAMPLE=y
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_AUDIOTESTSRC is not set
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_FFMPEGCOLORSPACE=y
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_GDP is not set
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_PLAYBACK=y
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_SUBPARSE is not set
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_TCP is not set
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_TYPEFIND=y
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC is not set
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_VIDEORATE is not set
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_VIDEOSCALE=y
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_VOLUME=y
#
# plugins with external dependencies (there may be more available)
#
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_OGG is not set
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_PANGO is not set
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_THEORA is not set
# BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_VORBIS is not set
# BR2_PACKAGE_GST_PLUGINS_GOOD is not set
# BR2_PACKAGE_GST_PLUGINS_BAD is not set
# BR2_PACKAGE_GST_PLUGINS_UGLY is not set
# BR2_PACKAGE_LIBCDAUDIO is not set
# BR2_PACKAGE_LIBDVDREAD is not set
# BR2_PACKAGE_LIBDVDNAV is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMMS is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_SWFDEC is not set
# BR2_PACKAGE_FESTIVAL is not set
# BR2_PACKAGE_TAGLIB is not set
# BR2_PACKAGE_TREMOR is not set
# BR2_PACKAGE_VLC is not set
#
# Graphic libraries and applications (graphic/text)
#
#
# text rendering libraries
#
BR2_PACKAGE_NCURSES=y
# BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
# BR2_PACKAGE_NCURSES_TARGET_FORM is not set
# BR2_PACKAGE_NCURSES_TARGET_MENU is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_SLANG is not set
#
# text rendering applications
#
# BR2_PACKAGE_DIALOG is not set
#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
BR2_PACKAGE_JPEG=y
# BR2_PACKAGE_LIBART is not set
BR2_PACKAGE_LIBPNG=y
BR2_PACKAGE_LIBUNGIF=y
# BR2_PACKAGE_LINUX_FUSION is not set
BR2_PACKAGE_PIXMAN=y
# BR2_PACKAGE_SDL is not set
BR2_PACKAGE_TIFF=y
#
# busybox graphic applications
#
#
# --> May be broken in busybox
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FBSET is not set
#
# other GUIs
#
BR2_PACKAGE_QT=y
# BR2_PACKAGE_QT_DEBUG is not set
BR2_PACKAGE_QT_SHARED=y
# BR2_PACKAGE_QT_STATIC is not set
BR2_PACKAGE_QT_LICENSE_APPROVED=y
BR2_PACKAGE_QT_QT3SUPPORT=y
BR2_PACKAGE_QT_GUI_MODULE=y
#
# Pixel depths
#
#
# Deselecting each option leads to Qt's default (8,16,32)
#
# BR2_PACKAGE_QT_PIXEL_DEPTH_1 is not set
# BR2_PACKAGE_QT_PIXEL_DEPTH_4 is not set
BR2_PACKAGE_QT_PIXEL_DEPTH_8=y
# BR2_PACKAGE_QT_PIXEL_DEPTH_12 is not set
# BR2_PACKAGE_QT_PIXEL_DEPTH_15 is not set
BR2_PACKAGE_QT_PIXEL_DEPTH_16=y
# BR2_PACKAGE_QT_PIXEL_DEPTH_18 is not set
# BR2_PACKAGE_QT_PIXEL_DEPTH_24 is not set
BR2_PACKAGE_QT_PIXEL_DEPTH_32=y
#
# Fonts
#
BR2_PACKAGE_QT_FONT_MICRO=y
BR2_PACKAGE_QT_FONT_FIXED=y
BR2_PACKAGE_QT_FONT_HELVETICA=y
# BR2_PACKAGE_QT_FONT_JAPANESE is not set
BR2_PACKAGE_QT_FONT_UNIFONT=y
# BR2_PACKAGE_QT_NOFREETYPE is not set
# BR2_PACKAGE_QT_QTFREETYPE is not set
BR2_PACKAGE_QT_SYSTEMFREETYPE=y
BR2_PACKAGE_QT_GIF=y
# BR2_PACKAGE_QT_LIBMNG is not set
# BR2_PACKAGE_QT_NOJPEG is not set
BR2_PACKAGE_QT_SYSTEMJPEG=y
# BR2_PACKAGE_QT_QTJPEG is not set
# BR2_PACKAGE_QT_NOPNG is not set
BR2_PACKAGE_QT_SYSTEMPNG=y
# BR2_PACKAGE_QT_QTPNG is not set
# BR2_PACKAGE_QT_NOTIFF is not set
BR2_PACKAGE_QT_SYSTEMTIFF=y
# BR2_PACKAGE_QT_QTTIFF is not set
BR2_PACKAGE_QT_QTZLIB=y
# BR2_PACKAGE_QT_SYSTEMZLIB is not set
BR2_PACKAGE_QT_EMB_PLATFORM="arm"
BR2_PACKAGE_QT_SQL_MODULE=y
# BR2_PACKAGE_QT_MYSQL is not set
# BR2_PACKAGE_QT_IBASE is not set
# BR2_PACKAGE_QT_ODBC is not set
# BR2_PACKAGE_QT_PSQL is not set
BR2_PACKAGE_QT_SQLITE=y
# BR2_PACKAGE_QT_SQLITE2 is not set
#
# Graphics drivers
#
BR2_PACKAGE_QT_GFX_LINUXFB=y
# BR2_PACKAGE_QT_GFX_TRANSFORMED is not set
# BR2_PACKAGE_QT_GFX_QVFB is not set
# BR2_PACKAGE_QT_GFX_VNC is not set
# BR2_PACKAGE_QT_GFX_MULTISCREEN is not set
#
# Mouse drivers
#
# BR2_PACKAGE_QT_MOUSE_PC is not set
# BR2_PACKAGE_QT_MOUSE_BUS is not set
# BR2_PACKAGE_QT_MOUSE_LINUXTP is not set
# BR2_PACKAGE_QT_MOUSE_YOPY is not set
# BR2_PACKAGE_QT_MOUSE_VR41XX is not set
BR2_PACKAGE_QT_MOUSE_TSLIB=y
# BR2_PACKAGE_QT_MOUSE_QVFB is not set
#
# Keyboard drivers
#
BR2_PACKAGE_QT_KEYBOARD_TTY=y
BR2_PACKAGE_QT_KEYBOARD_USB=y
# BR2_PACKAGE_QT_KEYBOARD_SL5000 is not set
# BR2_PACKAGE_QT_KEYBOARD_YOPY is not set
# BR2_PACKAGE_QT_KEYBOARD_VR41XX is not set
# BR2_PACKAGE_QT_KEYBOARD_QVFB is not set
BR2_PACKAGE_QT_PHONON=y
BR2_PACKAGE_QT_XML=y
BR2_PACKAGE_QT_XMLPATTERNS=y
BR2_PACKAGE_QT_SVG=y
BR2_PACKAGE_QT_NETWORK=y
BR2_PACKAGE_QT_WEBKIT=y
# BR2_PACKAGE_QT_STL is not set
# BR2_PACKAGE_QT_OPENSSL is not set
BR2_PACKAGE_QT_SCRIPT=y
BR2_PACKAGE_QT_SCRIPTTOOLS=y
# BR2_PACKAGE_XORG7 is not set
#
# X libraries and helper libraries
#
BR2_PACKAGE_ATK=y
BR2_PACKAGE_CAIRO=y
BR2_PACKAGE_CAIRO_PS=y
BR2_PACKAGE_CAIRO_PDF=y
BR2_PACKAGE_CAIRO_PNG=y
BR2_PACKAGE_CAIRO_SVG=y
BR2_PACKAGE_PANGO=y
BR2_PACKAGE_LIBDRM=y
# BR2_PACKAGE_LIBERATION is not set
# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
BR2_PACKAGE_FONTCONFIG=y
BR2_PACKAGE_FREETYPE=y
BR2_PACKAGE_TSLIB=y
# BR2_PACKAGE_WEBKIT is not set
#
# X Window managers
#
#
# X applications
#
# BR2_PACKAGE_GOB2 is not set
# BR2_PACKAGE_SYLPHEED is not set
#
# Compressors / decompressors
#
# BR2_PACKAGE_GZIP is not set
# BR2_PACKAGE_LIBARCHIVE is not set
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_LZMA is not set
BR2_PACKAGE_ZLIB=y
#
# Package managers
#
BR2_PACKAGE_IPKG=y
# BR2_PACKAGE_PORTAGE is not set
#
# rpm requires libneon with SSL, XML and ZLIB support
#
#
# Interpreter languages / Scripting
#
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
# BR2_PACKAGE_PHP is not set
#
# XML handling
#
BR2_PACKAGE_EXPAT=y
# BR2_PACKAGE_EZXML is not set
BR2_PACKAGE_LIBXML2=y
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_XERCES is not set
# BR2_PACKAGE_LIBXML_PARSER_PERL is not set
#
# Java
#
# BR2_PACKAGE_CLASSPATH is not set
#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_PRBOOM is not set
#
# Target filesystem options
#
BR2_ROOTFS_PREFIX="rootfs"
BR2_ROOTFS_SUFFIX=""
BR2_ROOTFS_POST_BUILD_SCRIPT=""
#
# filesystem for target device
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
BR2_TARGET_ROOTFS_TAR=y
BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_GZIP is not set
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
BR2_TARGET_ROOTFS_TAR_COPYTO=""
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
#
# bootloader for target device
#
# BR2_TARGET_UBOOT is not set
#
# Kernel
#
BR2_KERNEL_none=y
# BR2_KERNEL_LINUX_ADVANCED is not set
# BR2_KERNEL_LINUX is not set
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100507/a5751f57/attachment-0001.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-05-07 8:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-06 22:40 [Buildroot] serial console and wpa_supplicant mohamed mohamed nour eldin
2010-05-07 8:09 ` mohamed mohamed nour eldin
2010-05-07 8:16 ` Peter Korsgaard
2010-05-07 8:27 ` mohamed mohamed nour eldin
2010-05-07 8:43 ` Peter Korsgaard
2010-05-07 8:53 ` mohamed mohamed nour eldin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.