Re: [PATCH V1 0/8] Tegra XUSB charger detect support

[Felipe Balbi <balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1581 bytes --]


Hi,

Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> writes:
> On 29-03-2020 16:10, Felipe Balbi wrote:
>>> This patch series adds charger detect support on XUSB hardware used in
>>> Tegra210 and Tegra186 SoCs.
>>>
>>> This patchset is composed with :
>>>   - dt bindings of XUSB Pad Controller
>>>   - Tegra XUSB device mode driver to add vbus_draw support
>>>   - Tegra PHY driver for charger detect support
>>>
>>> Tests done:
>>>   - Connect USB cable from ubuntu host to micro-B port of DUT to detect
>>>     SDP_TYPE charger
>>>   - Connect USB cable from external powered USB hub(which inturn connects
>>>     to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
>>>   - Connect USB cable from USB charger to micro-B port of DUT to detect
>>>     DCP_TYPE charger.
>>> DUT: Jetson-tx1, Jetson tx2.
>>>
>>> Nagarjuna Kristam (8):
>>>    dt-bindings: phy: tegra-xusb: Add charger-detect property
>>>    usb: gadget: tegra-xudc: Add vbus_draw support
>>>    phy: tegra: xusb: Add support for UTMI pad power control
>>>    phy: tegra: xusb: Add USB2 pad power control support for Tegra210
>>>    phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
>>>    phy: tegra: xusb: Add support for charger detect
>>>    phy: tegra: xusb: Enable charger detect for Tegra186
>>>    phy: tegra: xusb: Enable charger detect for Tegra210
>> this doesn't apply cleanly. Could you resend after -rc1 is tagged?
>> 
>> -- balbi
>
> Sure, will send rebased patch once rc1 is available.

Thank you

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]