[PATCH 0/1] PM: omap_device fix for v3.1-rc

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 0/1] PM: omap_device fix for v3.1-rc
@ 2011-08-24 23:43 ` Kevin Hilman
  0 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2011-08-24 23:43 UTC (permalink / raw)
  To: Rafael J. Wysocki, Santosh Shilimkar
  Cc: linux-omap, linux-pm, linux-arm-kernel

While this fix could go via the OMAP tree, since the original patch
causing the problem went via Rafael's tree (due to dependencies) I'm
submitting the fix to go via Rafael's tree as well.

Applies on v3.1-rc3.

Kevin Hilman (1):
  OMAP: omap_device: only override _noirq methods, not normal
    suspend/resume

 arch/arm/plat-omap/omap_device.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

-- 
1.7.6


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 0/1] PM: omap_device fix for v3.1-rc
@ 2011-08-24 23:43 ` Kevin Hilman
  0 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2011-08-24 23:43 UTC (permalink / raw)
  To: linux-arm-kernel

While this fix could go via the OMAP tree, since the original patch
causing the problem went via Rafael's tree (due to dependencies) I'm
submitting the fix to go via Rafael's tree as well.

Applies on v3.1-rc3.

Kevin Hilman (1):
  OMAP: omap_device: only override _noirq methods, not normal
    suspend/resume

 arch/arm/plat-omap/omap_device.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

-- 
1.7.6

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  2011-08-24 23:43 ` Kevin Hilman
  (?)
@ 2011-08-24 23:43 ` Kevin Hilman
  -1 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2011-08-24 23:43 UTC (permalink / raw)
  To: Rafael J. Wysocki, Santosh Shilimkar
  Cc: linux-pm, linux-omap, linux-arm-kernel

commit c03f007a8bf0e092caeb6856a5c8a850df10b974 (OMAP: PM:
omap_device: add system PM methods for PM domain handling) mistakenly
used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
for the PM domains noirq methods.  Fix that by setting only the
suspend_noirq and resume_noirq methods with custom versions.

Note that all other PM domain methods (including the "normal"
suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
which configures them all to the default subsystem (platform_bus)
methods.

Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/plat-omap/omap_device.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index b6b4097..9a6a538 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   _od_runtime_idle)
 		USE_PLATFORM_PM_SLEEP_OPS
-		SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
+		.suspend_noirq = _od_suspend_noirq,
+		.resume_noirq = _od_resume_noirq,
 	}
 };

-- 
1.7.6

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  2011-08-24 23:43 ` Kevin Hilman
@ 2011-08-24 23:43   ` Kevin Hilman
  -1 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2011-08-24 23:43 UTC (permalink / raw)
  To: Rafael J. Wysocki, Santosh Shilimkar
  Cc: linux-omap, linux-pm, linux-arm-kernel

commit c03f007a8bf0e092caeb6856a5c8a850df10b974 (OMAP: PM:
omap_device: add system PM methods for PM domain handling) mistakenly
used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
for the PM domains noirq methods.  Fix that by setting only the
suspend_noirq and resume_noirq methods with custom versions.

Note that all other PM domain methods (including the "normal"
suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
which configures them all to the default subsystem (platform_bus)
methods.

Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/plat-omap/omap_device.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index b6b4097..9a6a538 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   _od_runtime_idle)
 		USE_PLATFORM_PM_SLEEP_OPS
-		SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
+		.suspend_noirq = _od_suspend_noirq,
+		.resume_noirq = _od_resume_noirq,
 	}
 };

-- 
1.7.6

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
@ 2011-08-24 23:43   ` Kevin Hilman
  0 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2011-08-24 23:43 UTC (permalink / raw)
  To: linux-arm-kernel

commit c03f007a8bf0e092caeb6856a5c8a850df10b974 (OMAP: PM:
omap_device: add system PM methods for PM domain handling) mistakenly
used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
for the PM domains noirq methods.  Fix that by setting only the
suspend_noirq and resume_noirq methods with custom versions.

Note that all other PM domain methods (including the "normal"
suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
which configures them all to the default subsystem (platform_bus)
methods.

Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/plat-omap/omap_device.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index b6b4097..9a6a538 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   _od_runtime_idle)
 		USE_PLATFORM_PM_SLEEP_OPS
-		SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
+		.suspend_noirq = _od_suspend_noirq,
+		.resume_noirq = _od_resume_noirq,
 	}
 };

-- 
1.7.6

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  2011-08-24 23:43   ` Kevin Hilman
  (?)
@ 2011-08-25 14:12   ` Rafael J. Wysocki
  -1 siblings, 0 replies; 14+ messages in thread
From: Rafael J. Wysocki @ 2011-08-25 14:12 UTC (permalink / raw)
  To: Kevin Hilman; +Cc: linux-pm, linux-omap, linux-arm-kernel

On Thursday, August 25, 2011, Kevin Hilman wrote:
> commit c03f007a8bf0e092caeb6856a5c8a850df10b974 (OMAP: PM:
> omap_device: add system PM methods for PM domain handling) mistakenly
> used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
> for the PM domains noirq methods.  Fix that by setting only the
> suspend_noirq and resume_noirq methods with custom versions.
> 
> Note that all other PM domain methods (including the "normal"
> suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
> which configures them all to the default subsystem (platform_bus)
> methods.
> 
> Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Signed-off-by: Kevin Hilman <khilman@ti.com>

Applied to linux-pm/pm-fixes, will be pushed for 3.1, thanks!

Rafael


> ---
>  arch/arm/plat-omap/omap_device.c |    3 ++-
>  1 files changed, 2 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
> index b6b4097..9a6a538 100644
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>  		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>  				   _od_runtime_idle)
>  		USE_PLATFORM_PM_SLEEP_OPS
> -		SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
> +		.suspend_noirq = _od_suspend_noirq,
> +		.resume_noirq = _od_resume_noirq,
>  	}
>  };
>  
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  2011-08-24 23:43   ` Kevin Hilman
@ 2011-08-25 14:12     ` Rafael J. Wysocki
  -1 siblings, 0 replies; 14+ messages in thread
From: Rafael J. Wysocki @ 2011-08-25 14:12 UTC (permalink / raw)
  To: Kevin Hilman; +Cc: Santosh Shilimkar, linux-omap, linux-pm, linux-arm-kernel

On Thursday, August 25, 2011, Kevin Hilman wrote:
> commit c03f007a8bf0e092caeb6856a5c8a850df10b974 (OMAP: PM:
> omap_device: add system PM methods for PM domain handling) mistakenly
> used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
> for the PM domains noirq methods.  Fix that by setting only the
> suspend_noirq and resume_noirq methods with custom versions.
> 
> Note that all other PM domain methods (including the "normal"
> suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
> which configures them all to the default subsystem (platform_bus)
> methods.
> 
> Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Signed-off-by: Kevin Hilman <khilman@ti.com>

Applied to linux-pm/pm-fixes, will be pushed for 3.1, thanks!

Rafael


> ---
>  arch/arm/plat-omap/omap_device.c |    3 ++-
>  1 files changed, 2 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
> index b6b4097..9a6a538 100644
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>  		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>  				   _od_runtime_idle)
>  		USE_PLATFORM_PM_SLEEP_OPS
> -		SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
> +		.suspend_noirq = _od_suspend_noirq,
> +		.resume_noirq = _od_resume_noirq,
>  	}
>  };
>  
> 


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
@ 2011-08-25 14:12     ` Rafael J. Wysocki
  0 siblings, 0 replies; 14+ messages in thread
From: Rafael J. Wysocki @ 2011-08-25 14:12 UTC (permalink / raw)
  To: linux-arm-kernel

On Thursday, August 25, 2011, Kevin Hilman wrote:
> commit c03f007a8bf0e092caeb6856a5c8a850df10b974 (OMAP: PM:
> omap_device: add system PM methods for PM domain handling) mistakenly
> used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
> for the PM domains noirq methods.  Fix that by setting only the
> suspend_noirq and resume_noirq methods with custom versions.
> 
> Note that all other PM domain methods (including the "normal"
> suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
> which configures them all to the default subsystem (platform_bus)
> methods.
> 
> Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Signed-off-by: Kevin Hilman <khilman@ti.com>

Applied to linux-pm/pm-fixes, will be pushed for 3.1, thanks!

Rafael


> ---
>  arch/arm/plat-omap/omap_device.c |    3 ++-
>  1 files changed, 2 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
> index b6b4097..9a6a538 100644
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>  		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>  				   _od_runtime_idle)
>  		USE_PLATFORM_PM_SLEEP_OPS
> -		SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
> +		.suspend_noirq = _od_suspend_noirq,
> +		.resume_noirq = _od_resume_noirq,
>  	}
>  };
>  
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  2011-08-24 23:43   ` Kevin Hilman
                     ` (2 preceding siblings ...)
  (?)
@ 2011-09-01 16:00   ` Arnd Bergmann
  -1 siblings, 0 replies; 14+ messages in thread
From: Arnd Bergmann @ 2011-09-01 16:00 UTC (permalink / raw)
  To: linux-arm-kernel; +Cc: linux-pm, linux-omap

On Thursday 25 August 2011, Kevin Hilman wrote:
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>                 SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>                                    _od_runtime_idle)
>                 USE_PLATFORM_PM_SLEEP_OPS
> -               SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
> +               .suspend_noirq = _od_suspend_noirq,
> +               .resume_noirq = _od_resume_noirq,
>         }
>  };

This breaks if CONFIG_SUSPEND is not set and the _od_suspend_noirq/_od_resume_noirq
functions are not defined.

	Arnd

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  2011-08-24 23:43   ` Kevin Hilman
@ 2011-09-01 16:00     ` Arnd Bergmann
  -1 siblings, 0 replies; 14+ messages in thread
From: Arnd Bergmann @ 2011-09-01 16:00 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: Kevin Hilman, Rafael J. Wysocki, Santosh Shilimkar, linux-pm,
	linux-omap

On Thursday 25 August 2011, Kevin Hilman wrote:
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>                 SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>                                    _od_runtime_idle)
>                 USE_PLATFORM_PM_SLEEP_OPS
> -               SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
> +               .suspend_noirq = _od_suspend_noirq,
> +               .resume_noirq = _od_resume_noirq,
>         }
>  };

This breaks if CONFIG_SUSPEND is not set and the _od_suspend_noirq/_od_resume_noirq
functions are not defined.

	Arnd

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
@ 2011-09-01 16:00     ` Arnd Bergmann
  0 siblings, 0 replies; 14+ messages in thread
From: Arnd Bergmann @ 2011-09-01 16:00 UTC (permalink / raw)
  To: linux-arm-kernel

On Thursday 25 August 2011, Kevin Hilman wrote:
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>                 SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>                                    _od_runtime_idle)
>                 USE_PLATFORM_PM_SLEEP_OPS
> -               SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
> +               .suspend_noirq = _od_suspend_noirq,
> +               .resume_noirq = _od_resume_noirq,
>         }
>  };

This breaks if CONFIG_SUSPEND is not set and the _od_suspend_noirq/_od_resume_noirq
functions are not defined.

	Arnd

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  2011-09-01 16:00     ` Arnd Bergmann
@ 2011-09-01 17:50       ` Kevin Hilman
  -1 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2011-09-01 17:50 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: linux-arm-kernel, Rafael J. Wysocki, Santosh Shilimkar, linux-pm,
	linux-omap

Arnd Bergmann <arnd@arndb.de> writes:

> On Thursday 25 August 2011, Kevin Hilman wrote:
>> --- a/arch/arm/plat-omap/omap_device.c
>> +++ b/arch/arm/plat-omap/omap_device.c
>> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>>                 SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>>                                    _od_runtime_idle)
>>                 USE_PLATFORM_PM_SLEEP_OPS
>> -               SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
>> +               .suspend_noirq = _od_suspend_noirq,
>> +               .resume_noirq = _od_resume_noirq,
>>         }
>>  };
>
> This breaks if CONFIG_SUSPEND is not set and the _od_suspend_noirq/_od_resume_noirq
> functions are not defined.

Indeed.

Will post a fix shortly.

Kevin


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
@ 2011-09-01 17:50       ` Kevin Hilman
  0 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2011-09-01 17:50 UTC (permalink / raw)
  To: linux-arm-kernel

Arnd Bergmann <arnd@arndb.de> writes:

> On Thursday 25 August 2011, Kevin Hilman wrote:
>> --- a/arch/arm/plat-omap/omap_device.c
>> +++ b/arch/arm/plat-omap/omap_device.c
>> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>>                 SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>>                                    _od_runtime_idle)
>>                 USE_PLATFORM_PM_SLEEP_OPS
>> -               SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
>> +               .suspend_noirq = _od_suspend_noirq,
>> +               .resume_noirq = _od_resume_noirq,
>>         }
>>  };
>
> This breaks if CONFIG_SUSPEND is not set and the _od_suspend_noirq/_od_resume_noirq
> functions are not defined.

Indeed.

Will post a fix shortly.

Kevin

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  2011-09-01 16:00     ` Arnd Bergmann
  (?)
  (?)
@ 2011-09-01 17:50     ` Kevin Hilman
  -1 siblings, 0 replies; 14+ messages in thread
From: Kevin Hilman @ 2011-09-01 17:50 UTC (permalink / raw)
  To: Arnd Bergmann; +Cc: linux-pm, linux-omap, linux-arm-kernel

Arnd Bergmann <arnd@arndb.de> writes:

> On Thursday 25 August 2011, Kevin Hilman wrote:
>> --- a/arch/arm/plat-omap/omap_device.c
>> +++ b/arch/arm/plat-omap/omap_device.c
>> @@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
>>                 SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
>>                                    _od_runtime_idle)
>>                 USE_PLATFORM_PM_SLEEP_OPS
>> -               SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
>> +               .suspend_noirq = _od_suspend_noirq,
>> +               .resume_noirq = _od_resume_noirq,
>>         }
>>  };
>
> This breaks if CONFIG_SUSPEND is not set and the _od_suspend_noirq/_od_resume_noirq
> functions are not defined.

Indeed.

Will post a fix shortly.

Kevin

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2011-09-01 17:50 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-08-24 23:43 [PATCH 0/1] PM: omap_device fix for v3.1-rc Kevin Hilman
2011-08-24 23:43 ` Kevin Hilman
2011-08-24 23:43 ` [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume Kevin Hilman
2011-08-24 23:43 ` Kevin Hilman
2011-08-24 23:43   ` Kevin Hilman
2011-08-25 14:12   ` Rafael J. Wysocki
2011-08-25 14:12   ` Rafael J. Wysocki
2011-08-25 14:12     ` Rafael J. Wysocki
2011-09-01 16:00   ` Arnd Bergmann
2011-09-01 16:00   ` Arnd Bergmann
2011-09-01 16:00     ` Arnd Bergmann
2011-09-01 17:50     ` Kevin Hilman
2011-09-01 17:50       ` Kevin Hilman
2011-09-01 17:50     ` Kevin Hilman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.