[RESEND PATCH v5 0/5] ASoC: fsl_asrc/fsl_easrc: expose per-pair/context DAIs and fix DMA race

[RESEND PATCH v5 0/5] ASoC: fsl_asrc/fsl_easrc: expose per-pair/context DAIs and fix DMA race

[shengjiu.wang]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

This series extends the i.MX ASRC and EASRC drivers to expose one DAI
per hardware conversion pair/context, allowing multiple independent
conversion paths to be active simultaneously.

Patches 1-2 update the DT bindings to add a ports container so each
conversion path can be wired independently in the audio graph.  The old
single port property is kept but marked deprecated.

Patch 3 moves dma_params into struct fsl_asrc_pair so each pair owns its
own copy, and registers it with the cpu DAI using per-direction setters in
fsl_asrc_dma_startup().  This removes the per-DAI probe callbacks from
fsl_asrc.c and fsl_easrc.c, which are no longer needed.

Patches 4-5 expose the individual DAIs: fsl_asrc registers three DAIs
(asrc-0/1/2) and fsl_easrc registers four (easrc-0/1/2/3).  The first
DAI in each driver retains the original generic stream names for
backward compatibility with existing machine drivers.

Changes since v5:
- rebase to latest master of linux-next

Changes since v4:
- update commit message of Patch 1/5 to add all variants
- add Frank's review tag in Patch 3/5
- add Krzysztof's review tag in Patch 2/5

Changes since v3:
- Update commit message of Patch 1/5 to remove reduntant sentence.
- add Frank's review tag in Patch 2/5

Changes since v2:
- add ports example to original example case in yaml file as port is
  deprecated
- remove the label in example.

Changes since v1:
- Patch 3 is new: moves dma_params into struct fsl_asrc_pair (one per pair)
- Per-direction snd_soc_dai_dma_data_set_playback/capture used instead
  of snd_soc_dai_init_dma_data to avoid clearing the other direction
- dma_params_tx/rx removed from struct fsl_asrc; single dma_params per
  pair suffices because each pair is unidirectional
- per-DAI probe callbacks removed (startup now sets dma_data)
- Cover letter and commit messages updated to reflect the above
- DAI names changed: paira/pairb/pairc -> asrc-0/asrc-1/asrc-2,
  ctxa/ctxb/ctxc/ctxd -> easrc-0/easrc-1/easrc-2/easrc-3; use index-based
  naming consistent with port@N in the DT binding
- Stream names changed: ASRCB/ASRCC/ASRCD -> ASRC1/ASRC2/ASRC3; align with
  the index-based DAI names above
- Binding port descriptions updated: pair A/B/C -> conversion path 0/1/2;
  hardware-agnostic wording to match port@N numbering

Shengjiu Wang (5):
  ASoC: dt-bindings: fsl,imx-asrc: update port binding to support
    multiple paths
  ASoC: dt-bindings: fsl,easrc: add ports binding for multiple
    conversion paths
  ASoC: fsl_asrc/fsl_easrc: move DMA params into pair/context struct
  ASoC: fsl_asrc: expose individual DAIs per conversion path
  ASoC: fsl_easrc: expose individual DAIs per conversion path

 .../devicetree/bindings/sound/fsl,easrc.yaml  |  45 +++++++
 .../bindings/sound/fsl,imx-asrc.yaml          |  43 +++++-
 sound/soc/fsl/fsl_asrc.c                      | 100 +++++++++-----
 sound/soc/fsl/fsl_asrc_common.h               |   7 +-
 sound/soc/fsl/fsl_asrc_dma.c                  |  14 ++
 sound/soc/fsl/fsl_easrc.c                     | 123 +++++++++++++-----
 6 files changed, 262 insertions(+), 70 deletions(-)

-- 
2.34.1

[RESEND PATCH v5 1/5] ASoC: dt-bindings: fsl,imx-asrc: update port binding to support multiple paths

[shengjiu.wang]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

All i.MX ASRC variants (imx35 through imx952) support up to three
conversion pairs (A, B, C). The existing binding exposed only a single
generic audio-graph port, which cannot represent independent conversion
paths when multiple pairs are in use simultaneously.

Add a ports container that enumerates up to three sub-ports, each
representing an independent conversion path:
  port@0 -- conversion path 0
  port@1 -- conversion path 1
  port@2 -- conversion path 2

Each sub-port references audio-graph-port.yaml as before. Hardware pairs
are allocated dynamically at stream open time; each active stream
direction (playback or capture) on a port consumes one hardware pair.

For backwards compatibility, keep the old single port property but mark
it deprecated. A schema constraint (not: required: [port, ports]) ensures
that both forms cannot be used at the same time. The binding example is
updated to show the preferred ports form.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 .../bindings/sound/fsl,imx-asrc.yaml          | 43 +++++++++++++++++--
 1 file changed, 39 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
index cd69bad107c7..67d2826eef3f 100644
--- a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
@@ -78,9 +78,19 @@ properties:
   power-domains:
     maxItems: 1
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    patternProperties:
+      "^port@[0-2]$":
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: port for an independent conversion path
+
   port:
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
+    deprecated: true
+    description: deprecated, use ports instead
 
   fsl,asrc-rate:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -125,6 +135,10 @@ required:
   - fsl,asrc-width
 
 allOf:
+  - not:
+      required:
+        - port
+        - ports
   - $ref: dai-common.yaml#
   - if:
       properties:
@@ -180,11 +194,32 @@ examples:
         fsl,asrc-rate = <48000>;
         fsl,asrc-width = <16>;
 
-        port {
-            playback-only;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                playback-only;
+                endpoint {
+                    remote-endpoint = <&fe00_ep>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                capture-only;
+                endpoint {
+                    remote-endpoint = <&fe01_ep>;
+                };
+            };
 
-            asrc_endpoint: endpoint {
-                remote-endpoint = <&fe00_ep>;
+            port@2 {
+                reg = <2>;
+                capture-only;
+                endpoint {
+                    remote-endpoint = <&fe02_ep>;
+                };
             };
         };
     };
-- 
2.34.1

Re: [RESEND PATCH v5 1/5] ASoC: dt-bindings: fsl,imx-asrc: update port binding to support multiple paths

[Frank Li]

On Tue, Sep 22, 2026 at 11:34:24AM +0800, shengjiu.wang@oss.nxp.com wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
>
> All i.MX ASRC variants (imx35 through imx952) support up to three
> conversion pairs (A, B, C). The existing binding exposed only a single
> generic audio-graph port, which cannot represent independent conversion
> paths when multiple pairs are in use simultaneously.
>
> Add a ports container that enumerates up to three sub-ports, each
> representing an independent conversion path:
>   port@0 -- conversion path 0
>   port@1 -- conversion path 1
>   port@2 -- conversion path 2
>
> Each sub-port references audio-graph-port.yaml as before. Hardware pairs
> are allocated dynamically at stream open time; each active stream
> direction (playback or capture) on a port consumes one hardware pair.
>
> For backwards compatibility, keep the old single port property but mark
> it deprecated. A schema constraint (not: required: [port, ports]) ensures
> that both forms cannot be used at the same time. The binding example is
> updated to show the preferred ports form.
>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  .../bindings/sound/fsl,imx-asrc.yaml          | 43 +++++++++++++++++--
>  1 file changed, 39 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
> index cd69bad107c7..67d2826eef3f 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
> +++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
> @@ -78,9 +78,19 @@ properties:
>    power-domains:
>      maxItems: 1
>
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    patternProperties:
> +      "^port@[0-2]$":
> +        $ref: audio-graph-port.yaml#
> +        unevaluatedProperties: false
> +        description: port for an independent conversion path
> +
>    port:
>      $ref: audio-graph-port.yaml#
>      unevaluatedProperties: false
> +    deprecated: true
> +    description: deprecated, use ports instead
>
>    fsl,asrc-rate:
>      $ref: /schemas/types.yaml#/definitions/uint32
> @@ -125,6 +135,10 @@ required:
>    - fsl,asrc-width
>
>  allOf:
> +  - not:
> +      required:
> +        - port
> +        - ports
>    - $ref: dai-common.yaml#
>    - if:
>        properties:
> @@ -180,11 +194,32 @@ examples:
>          fsl,asrc-rate = <48000>;
>          fsl,asrc-width = <16>;
>
> -        port {
> -            playback-only;
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                playback-only;
> +                endpoint {
> +                    remote-endpoint = <&fe00_ep>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                capture-only;
> +                endpoint {
> +                    remote-endpoint = <&fe01_ep>;
> +                };
> +            };
>
> -            asrc_endpoint: endpoint {
> -                remote-endpoint = <&fe00_ep>;
> +            port@2 {
> +                reg = <2>;
> +                capture-only;
> +                endpoint {
> +                    remote-endpoint = <&fe02_ep>;
> +                };
>              };
>          };
>      };
> --
> 2.34.1
>
>

[RESEND PATCH v5 2/5] ASoC: dt-bindings: fsl,easrc: add ports binding for multiple conversion paths

[shengjiu.wang]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

The i.MX EASRC hardware supports up to four conversion contexts
(A, B, C, D). Add a ports container property to the binding to allow
each independent conversion path to be represented as an individual
audio-graph port:

  port@0 -- conversion path 0
  port@1 -- conversion path 1
  port@2 -- conversion path 2
  port@3 -- conversion path 3

Each sub-port references audio-graph-port.yaml and follows the standard
audio-graph binding conventions. Contexts are allocated dynamically at
stream open time; each active stream direction (playback or capture) on
a port consumes one hardware context.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../devicetree/bindings/sound/fsl,easrc.yaml  | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
index d5727f8bfb0b..a53ec4f6f1c0 100644
--- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -55,6 +55,14 @@ properties:
       - const: imx/easrc/easrc-imx8mn.bin
     description: The coefficient table for the filters
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    patternProperties:
+      "^port@[0-3]$":
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: port for an independent conversion path
+
   fsl,asrc-rate:
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 8000
@@ -106,4 +114,41 @@ examples:
         firmware-name = "imx/easrc/easrc-imx8mn.bin";
         fsl,asrc-rate = <8000>;
         fsl,asrc-format = <2>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                playback-only;
+                endpoint {
+                    remote-endpoint = <&fe00_ep>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                playback-only;
+                endpoint {
+                    remote-endpoint = <&fe01_ep>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                capture-only;
+                endpoint {
+                    remote-endpoint = <&fe02_ep>;
+                };
+            };
+
+            port@3 {
+                reg = <3>;
+                capture-only;
+                endpoint {
+                    remote-endpoint = <&fe03_ep>;
+                };
+            };
+        };
     };
-- 
2.34.1

[RESEND PATCH v5 3/5] ASoC: fsl_asrc/fsl_easrc: move DMA params into pair/context struct

[shengjiu.wang]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

The shared dma_params_tx/rx fields in struct fsl_asrc were a single
instance written by every concurrent fsl_asrc_dma_hw_params() call.
With multiple DAIs registered (one per pair/context), parallel stream
open+hw_params races would corrupt addr and maxburst for all active
streams.

Fix by moving dma_params into struct fsl_asrc_pair so each pair owns
its own copy. Initialise them in fsl_asrc_dma_startup() where
the pair is allocated, which makes the per-DAI probe callbacks in
fsl_asrc.c and fsl_easrc.c redundant; remove those as well.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
 sound/soc/fsl/fsl_asrc.c        | 11 -----------
 sound/soc/fsl/fsl_asrc_common.h |  7 +++----
 sound/soc/fsl/fsl_asrc_dma.c    | 14 ++++++++++++++
 sound/soc/fsl/fsl_easrc.c       | 11 -----------
 4 files changed, 17 insertions(+), 26 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index d80afe1bf4be..6007786aca66 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -781,18 +781,7 @@ static int fsl_asrc_dai_trigger(struct snd_pcm_substream *substream, int cmd,
 	return 0;
 }
 
-static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
-{
-	struct fsl_asrc *asrc = snd_soc_dai_get_drvdata(dai);
-
-	snd_soc_dai_init_dma_data(dai, &asrc->dma_params_tx,
-				  &asrc->dma_params_rx);
-
-	return 0;
-}
-
 static const struct snd_soc_dai_ops fsl_asrc_dai_ops = {
-	.probe		= fsl_asrc_dai_probe,
 	.startup	= fsl_asrc_dai_startup,
 	.hw_params	= fsl_asrc_dai_hw_params,
 	.hw_free	= fsl_asrc_dai_hw_free,
diff --git a/sound/soc/fsl/fsl_asrc_common.h b/sound/soc/fsl/fsl_asrc_common.h
index c8a1a2b5915d..4e6b00cb5d63 100644
--- a/sound/soc/fsl/fsl_asrc_common.h
+++ b/sound/soc/fsl/fsl_asrc_common.h
@@ -53,6 +53,7 @@ struct fsl_asrc_m2m_cap {
  * @dma_data: private dma data
  * @pos: hardware pointer position
  * @req_dma_chan: flag to release dev_to_dev chan
+ * @dma_params: DMA parameters for transmit/receive channel
  * @private: pair private area
  * @complete: dma task complete
  * @sample_format: format of m2m
@@ -76,6 +77,8 @@ struct fsl_asrc_pair {
 	unsigned int pos;
 	bool req_dma_chan;
 
+	struct snd_dmaengine_dai_dma_data dma_params;
+
 	void *private;
 
 	/* used for m2m */
@@ -92,8 +95,6 @@ struct fsl_asrc_pair {
 /**
  * fsl_asrc: ASRC common data
  *
- * @dma_params_rx: DMA parameters for receive channel
- * @dma_params_tx: DMA parameters for transmit channel
  * @pdev: platform device pointer
  * @regmap: regmap handler
  * @paddr: physical address to the base address of registers
@@ -128,8 +129,6 @@ struct fsl_asrc_pair {
  * @private: private data structure
  */
 struct fsl_asrc {
-	struct snd_dmaengine_dai_dma_data dma_params_rx;
-	struct snd_dmaengine_dai_dma_data dma_params_tx;
 	struct platform_device *pdev;
 	struct regmap *regmap;
 	unsigned long paddr;
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 2f662bdf14d0..15f2dccc3584 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -392,6 +392,20 @@ static int fsl_asrc_dma_startup(struct snd_soc_component *component,
 
 	runtime->private_data = pair;
 
+	/*
+	 * Point the cpu DAI dma_data at the per-pair params so that
+	 * concurrent hw_params calls on different pairs each write to
+	 * their own struct and do not race on addr/maxburst.  Use the
+	 * per-direction setters so that a concurrent open of the other
+	 * direction on the same DAI does not NULL out its pointer.
+	 */
+	if (tx)
+		snd_soc_dai_dma_data_set_playback(snd_soc_rtd_to_cpu(rtd, 0),
+						  &pair->dma_params);
+	else
+		snd_soc_dai_dma_data_set_capture(snd_soc_rtd_to_cpu(rtd, 0),
+						 &pair->dma_params);
+
 	/* Request a dummy pair, which will be released later.
 	 * Request pair function needs channel num as input, for this
 	 * dummy pair, we just request "1" channel temporarily.
diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c
index aced16d1228a..a6ac94055b17 100644
--- a/sound/soc/fsl/fsl_easrc.c
+++ b/sound/soc/fsl/fsl_easrc.c
@@ -1582,18 +1582,7 @@ static int fsl_easrc_hw_free(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int fsl_easrc_dai_probe(struct snd_soc_dai *cpu_dai)
-{
-	struct fsl_asrc *easrc = dev_get_drvdata(cpu_dai->dev);
-
-	snd_soc_dai_init_dma_data(cpu_dai,
-				  &easrc->dma_params_tx,
-				  &easrc->dma_params_rx);
-	return 0;
-}
-
 static const struct snd_soc_dai_ops fsl_easrc_dai_ops = {
-	.probe		= fsl_easrc_dai_probe,
 	.startup	= fsl_easrc_startup,
 	.trigger	= fsl_easrc_trigger,
 	.hw_params	= fsl_easrc_hw_params,
-- 
2.34.1

Re: [RESEND PATCH v5 3/5] ASoC: fsl_asrc/fsl_easrc: move DMA params into pair/context struct

[Daniel Baluta]

On 9/22/26 06:34, shengjiu.wang@oss.nxp.com wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
> 
> The shared dma_params_tx/rx fields in struct fsl_asrc were a single
> instance written by every concurrent fsl_asrc_dma_hw_params() call.
> With multiple DAIs registered (one per pair/context), parallel stream
> open+hw_params races would corrupt addr and maxburst for all active
> streams.
> 
> Fix by moving dma_params into struct fsl_asrc_pair so each pair owns
> its own copy. Initialise them in fsl_asrc_dma_startup() where
> the pair is allocated, which makes the per-DAI probe callbacks in
> fsl_asrc.c and fsl_easrc.c redundant; remove those as well.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>

[RESEND PATCH v5 4/5] ASoC: fsl_asrc: expose individual DAIs per conversion path

[shengjiu.wang]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

The i.MX ASRC hardware supports three independent conversion pairs
(A, B, C). The driver previously registered a single DAI with generic
stream names "ASRC-Playback" and "ASRC-Capture", which prevents
multiple independent conversion paths from being used simultaneously.

Replace the single fsl_asrc_dai instance with an array of three DAI
drivers to allow up to three independent conversion paths to be active
at the same time:

  asrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
  asrc-1 -- ASRC1-Playback / ASRC1-Capture
  asrc-2 -- ASRC2-Playback / ASRC2-Capture

asrc-0 retains the original generic stream names to preserve backward
compatibility with existing machine drivers and board configurations.
Each DAI retains the same channel, rate and format capabilities as the
original. Update the devm_snd_soc_register_component() call to register
all three DAIs.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_asrc.c | 89 +++++++++++++++++++++++++++++++---------
 1 file changed, 69 insertions(+), 20 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 6007786aca66..56604fa1613a 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -792,27 +792,76 @@ static const struct snd_soc_dai_ops fsl_asrc_dai_ops = {
 				 SNDRV_PCM_FMTBIT_S16_LE | \
 				 SNDRV_PCM_FMTBIT_S24_3LE)
 
-static struct snd_soc_dai_driver fsl_asrc_dai = {
-	.playback = {
-		.stream_name = "ASRC-Playback",
-		.channels_min = 1,
-		.channels_max = 10,
-		.rate_min = 5512,
-		.rate_max = 192000,
-		.rates = SNDRV_PCM_RATE_KNOT,
-		.formats = FSL_ASRC_FORMATS |
-			   SNDRV_PCM_FMTBIT_S8,
+static struct snd_soc_dai_driver fsl_asrc_dai[] = {
+	{
+		.name = "asrc-0",
+		.playback = {
+			.stream_name = "ASRC-Playback",
+			.channels_min = 1,
+			.channels_max = 10,
+			.rate_min = 5512,
+			.rate_max = 192000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_ASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_S8,
+		},
+		.capture = {
+			.stream_name = "ASRC-Capture",
+			.channels_min = 1,
+			.channels_max = 10,
+			.rate_min = 5512,
+			.rate_max = 192000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_ASRC_FORMATS,
+		},
+		.ops = &fsl_asrc_dai_ops,
+	},
+	{
+		.name = "asrc-1",
+		.playback = {
+			.stream_name = "ASRC1-Playback",
+			.channels_min = 1,
+			.channels_max = 10,
+			.rate_min = 5512,
+			.rate_max = 192000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_ASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_S8,
+		},
+		.capture = {
+			.stream_name = "ASRC1-Capture",
+			.channels_min = 1,
+			.channels_max = 10,
+			.rate_min = 5512,
+			.rate_max = 192000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_ASRC_FORMATS,
+		},
+		.ops = &fsl_asrc_dai_ops,
 	},
-	.capture = {
-		.stream_name = "ASRC-Capture",
-		.channels_min = 1,
-		.channels_max = 10,
-		.rate_min = 5512,
-		.rate_max = 192000,
-		.rates = SNDRV_PCM_RATE_KNOT,
-		.formats = FSL_ASRC_FORMATS,
+	{
+		.name = "asrc-2",
+		.playback = {
+			.stream_name = "ASRC2-Playback",
+			.channels_min = 1,
+			.channels_max = 10,
+			.rate_min = 5512,
+			.rate_max = 192000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_ASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_S8,
+		},
+		.capture = {
+			.stream_name = "ASRC2-Capture",
+			.channels_min = 1,
+			.channels_max = 10,
+			.rate_min = 5512,
+			.rate_max = 192000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_ASRC_FORMATS,
+		},
+		.ops = &fsl_asrc_dai_ops,
 	},
-	.ops = &fsl_asrc_dai_ops,
 };
 
 static bool fsl_asrc_readable_reg(struct device *dev, unsigned int reg)
@@ -1393,7 +1442,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 		goto err_pm_get_sync;
 
 	ret = devm_snd_soc_register_component(&pdev->dev, &fsl_asrc_component,
-					      &fsl_asrc_dai, 1);
+					      fsl_asrc_dai, ARRAY_SIZE(fsl_asrc_dai));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register ASoC DAI\n");
 		goto err_pm_get_sync;
-- 
2.34.1

Re: [RESEND PATCH v5 4/5] ASoC: fsl_asrc: expose individual DAIs per conversion path

[Chancel Liu]

On 9/22/2026 11:34 AM, shengjiu.wang@oss.nxp.com wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
> 
> The i.MX ASRC hardware supports three independent conversion pairs
> (A, B, C). The driver previously registered a single DAI with generic
> stream names "ASRC-Playback" and "ASRC-Capture", which prevents
> multiple independent conversion paths from being used simultaneously.
> 
> Replace the single fsl_asrc_dai instance with an array of three DAI
> drivers to allow up to three independent conversion paths to be active
> at the same time:
> 
>   asrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
>   asrc-1 -- ASRC1-Playback / ASRC1-Capture
>   asrc-2 -- ASRC2-Playback / ASRC2-Capture
> 
> asrc-0 retains the original generic stream names to preserve backward
> compatibility with existing machine drivers and board configurations.
> Each DAI retains the same channel, rate and format capabilities as the
> original. Update the devm_snd_soc_register_component() call to register
> all three DAIs.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

Reviewed-by: Chancel Liu <chancel.liu@gmail.com>

Regards,
Chancel Liu

Re: [RESEND PATCH v5 4/5] ASoC: fsl_asrc: expose individual DAIs per conversion path

[Frank Li]

On Tue, Sep 22, 2026 at 11:34:27AM +0800, shengjiu.wang@oss.nxp.com wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
>
> The i.MX ASRC hardware supports three independent conversion pairs
> (A, B, C). The driver previously registered a single DAI with generic
> stream names "ASRC-Playback" and "ASRC-Capture", which prevents
> multiple independent conversion paths from being used simultaneously.
>
> Replace the single fsl_asrc_dai instance with an array of three DAI
> drivers to allow up to three independent conversion paths to be active
> at the same time:
>
>   asrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
>   asrc-1 -- ASRC1-Playback / ASRC1-Capture
>   asrc-2 -- ASRC2-Playback / ASRC2-Capture
>
> asrc-0 retains the original generic stream names to preserve backward
> compatibility with existing machine drivers and board configurations.
> Each DAI retains the same channel, rate and format capabilities as the
> original. Update the devm_snd_soc_register_component() call to register
> all three DAIs.
>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  sound/soc/fsl/fsl_asrc.c | 89 +++++++++++++++++++++++++++++++---------
>  1 file changed, 69 insertions(+), 20 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index 6007786aca66..56604fa1613a 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -792,27 +792,76 @@ static const struct snd_soc_dai_ops fsl_asrc_dai_ops = {
>  				 SNDRV_PCM_FMTBIT_S16_LE | \
>  				 SNDRV_PCM_FMTBIT_S24_3LE)
>
> -static struct snd_soc_dai_driver fsl_asrc_dai = {
> -	.playback = {
> -		.stream_name = "ASRC-Playback",
> -		.channels_min = 1,
> -		.channels_max = 10,
> -		.rate_min = 5512,
> -		.rate_max = 192000,
> -		.rates = SNDRV_PCM_RATE_KNOT,
> -		.formats = FSL_ASRC_FORMATS |
> -			   SNDRV_PCM_FMTBIT_S8,
> +static struct snd_soc_dai_driver fsl_asrc_dai[] = {
> +	{
> +		.name = "asrc-0",
> +		.playback = {
> +			.stream_name = "ASRC-Playback",
> +			.channels_min = 1,
> +			.channels_max = 10,
> +			.rate_min = 5512,
> +			.rate_max = 192000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_ASRC_FORMATS |
> +				   SNDRV_PCM_FMTBIT_S8,
> +		},
> +		.capture = {
> +			.stream_name = "ASRC-Capture",
> +			.channels_min = 1,
> +			.channels_max = 10,
> +			.rate_min = 5512,
> +			.rate_max = 192000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_ASRC_FORMATS,
> +		},
> +		.ops = &fsl_asrc_dai_ops,
> +	},
> +	{
> +		.name = "asrc-1",
> +		.playback = {
> +			.stream_name = "ASRC1-Playback",
> +			.channels_min = 1,
> +			.channels_max = 10,
> +			.rate_min = 5512,
> +			.rate_max = 192000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_ASRC_FORMATS |
> +				   SNDRV_PCM_FMTBIT_S8,
> +		},
> +		.capture = {
> +			.stream_name = "ASRC1-Capture",
> +			.channels_min = 1,
> +			.channels_max = 10,
> +			.rate_min = 5512,
> +			.rate_max = 192000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_ASRC_FORMATS,
> +		},
> +		.ops = &fsl_asrc_dai_ops,
>  	},
> -	.capture = {
> -		.stream_name = "ASRC-Capture",
> -		.channels_min = 1,
> -		.channels_max = 10,
> -		.rate_min = 5512,
> -		.rate_max = 192000,
> -		.rates = SNDRV_PCM_RATE_KNOT,
> -		.formats = FSL_ASRC_FORMATS,
> +	{
> +		.name = "asrc-2",
> +		.playback = {
> +			.stream_name = "ASRC2-Playback",
> +			.channels_min = 1,
> +			.channels_max = 10,
> +			.rate_min = 5512,
> +			.rate_max = 192000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_ASRC_FORMATS |
> +				   SNDRV_PCM_FMTBIT_S8,
> +		},
> +		.capture = {
> +			.stream_name = "ASRC2-Capture",
> +			.channels_min = 1,
> +			.channels_max = 10,
> +			.rate_min = 5512,
> +			.rate_max = 192000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_ASRC_FORMATS,
> +		},
> +		.ops = &fsl_asrc_dai_ops,
>  	},
> -	.ops = &fsl_asrc_dai_ops,
>  };
>
>  static bool fsl_asrc_readable_reg(struct device *dev, unsigned int reg)
> @@ -1393,7 +1442,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>  		goto err_pm_get_sync;
>
>  	ret = devm_snd_soc_register_component(&pdev->dev, &fsl_asrc_component,
> -					      &fsl_asrc_dai, 1);
> +					      fsl_asrc_dai, ARRAY_SIZE(fsl_asrc_dai));
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to register ASoC DAI\n");
>  		goto err_pm_get_sync;
> --
> 2.34.1
>
>

[RESEND PATCH v5 5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path

[shengjiu.wang]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

The i.MX EASRC hardware supports four independent conversion contexts
(A, B, C, D). The driver previously registered a single DAI with generic
stream names "ASRC-Playback" and "ASRC-Capture", which prevents
multiple independent conversion paths from being used simultaneously.

Replace the single fsl_easrc_dai instance with an array of four DAI
drivers to allow up to four independent conversion paths to be active
at the same time:

  easrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
  easrc-1 -- ASRC1-Playback / ASRC1-Capture
  easrc-2 -- ASRC2-Playback / ASRC2-Capture
  easrc-3 -- ASRC3-Playback / ASRC3-Capture

easrc-0 retains the original generic stream names to preserve backward
compatibility with existing machine drivers and board configurations.
Each DAI retains the same channel, rate and format capabilities as the
original, including IEC958 subframe support on the capture side. Update
the devm_snd_soc_register_component() call to register all four DAIs.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_easrc.c | 112 +++++++++++++++++++++++++++++++-------
 1 file changed, 92 insertions(+), 20 deletions(-)

diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c
index a6ac94055b17..cd22ea3e03bc 100644
--- a/sound/soc/fsl/fsl_easrc.c
+++ b/sound/soc/fsl/fsl_easrc.c
@@ -1589,27 +1589,99 @@ static const struct snd_soc_dai_ops fsl_easrc_dai_ops = {
 	.hw_free	= fsl_easrc_hw_free,
 };
 
-static struct snd_soc_dai_driver fsl_easrc_dai = {
-	.playback = {
-		.stream_name = "ASRC-Playback",
-		.channels_min = 1,
-		.channels_max = 32,
-		.rate_min = 8000,
-		.rate_max = 768000,
-		.rates = SNDRV_PCM_RATE_KNOT,
-		.formats = FSL_EASRC_FORMATS,
+static struct snd_soc_dai_driver fsl_easrc_dai[] = {
+	{
+		.name = "easrc-0",
+		.playback = {
+			.stream_name = "ASRC-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
 	},
-	.capture = {
-		.stream_name = "ASRC-Capture",
-		.channels_min = 1,
-		.channels_max = 32,
-		.rate_min = 8000,
-		.rate_max = 768000,
-		.rates = SNDRV_PCM_RATE_KNOT,
-		.formats = FSL_EASRC_FORMATS |
-			   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+	{
+		.name = "easrc-1",
+		.playback = {
+			.stream_name = "ASRC1-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC1-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
+	},
+	{
+		.name = "easrc-2",
+		.playback = {
+			.stream_name = "ASRC2-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC2-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
+	},
+	{
+		.name = "easrc-3",
+		.playback = {
+			.stream_name = "ASRC3-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC3-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
 	},
-	.ops = &fsl_easrc_dai_ops,
 };
 
 static const struct snd_soc_component_driver fsl_easrc_component = {
@@ -2234,7 +2306,7 @@ static int fsl_easrc_probe(struct platform_device *pdev)
 	regcache_cache_only(easrc->regmap, true);
 
 	ret = devm_snd_soc_register_component(dev, &fsl_easrc_component,
-					      &fsl_easrc_dai, 1);
+					      fsl_easrc_dai, ARRAY_SIZE(fsl_easrc_dai));
 	if (ret) {
 		dev_err(dev, "failed to register ASoC DAI\n");
 		goto err_pm_disable;
-- 
2.34.1

Re: [RESEND PATCH v5 5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path

[Chancel Liu]

On 9/22/2026 11:34 AM, shengjiu.wang@oss.nxp.com wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
> 
> The i.MX EASRC hardware supports four independent conversion contexts
> (A, B, C, D). The driver previously registered a single DAI with generic
> stream names "ASRC-Playback" and "ASRC-Capture", which prevents
> multiple independent conversion paths from being used simultaneously.
> 
> Replace the single fsl_easrc_dai instance with an array of four DAI
> drivers to allow up to four independent conversion paths to be active
> at the same time:
> 
>   easrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
>   easrc-1 -- ASRC1-Playback / ASRC1-Capture
>   easrc-2 -- ASRC2-Playback / ASRC2-Capture
>   easrc-3 -- ASRC3-Playback / ASRC3-Capture
> 
> easrc-0 retains the original generic stream names to preserve backward
> compatibility with existing machine drivers and board configurations.
> Each DAI retains the same channel, rate and format capabilities as the
> original, including IEC958 subframe support on the capture side. Update
> the devm_snd_soc_register_component() call to register all four DAIs.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

Reviewed-by: Chancel Liu <chancel.liu@gmail.com>

Regards,
Chancel Liu

Re: [RESEND PATCH v5 5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path

[Frank Li]

On Tue, Sep 22, 2026 at 11:34:28AM +0800, shengjiu.wang@oss.nxp.com wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
>
> The i.MX EASRC hardware supports four independent conversion contexts
> (A, B, C, D). The driver previously registered a single DAI with generic
> stream names "ASRC-Playback" and "ASRC-Capture", which prevents
> multiple independent conversion paths from being used simultaneously.
>
> Replace the single fsl_easrc_dai instance with an array of four DAI
> drivers to allow up to four independent conversion paths to be active
> at the same time:
>
>   easrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
>   easrc-1 -- ASRC1-Playback / ASRC1-Capture
>   easrc-2 -- ASRC2-Playback / ASRC2-Capture
>   easrc-3 -- ASRC3-Playback / ASRC3-Capture
>
> easrc-0 retains the original generic stream names to preserve backward
> compatibility with existing machine drivers and board configurations.
> Each DAI retains the same channel, rate and format capabilities as the
> original, including IEC958 subframe support on the capture side. Update
> the devm_snd_soc_register_component() call to register all four DAIs.
>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  sound/soc/fsl/fsl_easrc.c | 112 +++++++++++++++++++++++++++++++-------
>  1 file changed, 92 insertions(+), 20 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c
> index a6ac94055b17..cd22ea3e03bc 100644
> --- a/sound/soc/fsl/fsl_easrc.c
> +++ b/sound/soc/fsl/fsl_easrc.c
> @@ -1589,27 +1589,99 @@ static const struct snd_soc_dai_ops fsl_easrc_dai_ops = {
>  	.hw_free	= fsl_easrc_hw_free,
>  };
>
> -static struct snd_soc_dai_driver fsl_easrc_dai = {
> -	.playback = {
> -		.stream_name = "ASRC-Playback",
> -		.channels_min = 1,
> -		.channels_max = 32,
> -		.rate_min = 8000,
> -		.rate_max = 768000,
> -		.rates = SNDRV_PCM_RATE_KNOT,
> -		.formats = FSL_EASRC_FORMATS,
> +static struct snd_soc_dai_driver fsl_easrc_dai[] = {
> +	{
> +		.name = "easrc-0",
> +		.playback = {
> +			.stream_name = "ASRC-Playback",
> +			.channels_min = 1,
> +			.channels_max = 32,
> +			.rate_min = 8000,
> +			.rate_max = 768000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_EASRC_FORMATS,
> +		},
> +		.capture = {
> +			.stream_name = "ASRC-Capture",
> +			.channels_min = 1,
> +			.channels_max = 32,
> +			.rate_min = 8000,
> +			.rate_max = 768000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_EASRC_FORMATS |
> +				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
> +		},
> +		.ops = &fsl_easrc_dai_ops,
>  	},
> -	.capture = {
> -		.stream_name = "ASRC-Capture",
> -		.channels_min = 1,
> -		.channels_max = 32,
> -		.rate_min = 8000,
> -		.rate_max = 768000,
> -		.rates = SNDRV_PCM_RATE_KNOT,
> -		.formats = FSL_EASRC_FORMATS |
> -			   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
> +	{
> +		.name = "easrc-1",
> +		.playback = {
> +			.stream_name = "ASRC1-Playback",
> +			.channels_min = 1,
> +			.channels_max = 32,
> +			.rate_min = 8000,
> +			.rate_max = 768000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_EASRC_FORMATS,
> +		},
> +		.capture = {
> +			.stream_name = "ASRC1-Capture",
> +			.channels_min = 1,
> +			.channels_max = 32,
> +			.rate_min = 8000,
> +			.rate_max = 768000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_EASRC_FORMATS |
> +				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
> +		},
> +		.ops = &fsl_easrc_dai_ops,
> +	},
> +	{
> +		.name = "easrc-2",
> +		.playback = {
> +			.stream_name = "ASRC2-Playback",
> +			.channels_min = 1,
> +			.channels_max = 32,
> +			.rate_min = 8000,
> +			.rate_max = 768000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_EASRC_FORMATS,
> +		},
> +		.capture = {
> +			.stream_name = "ASRC2-Capture",
> +			.channels_min = 1,
> +			.channels_max = 32,
> +			.rate_min = 8000,
> +			.rate_max = 768000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_EASRC_FORMATS |
> +				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
> +		},
> +		.ops = &fsl_easrc_dai_ops,
> +	},
> +	{
> +		.name = "easrc-3",
> +		.playback = {
> +			.stream_name = "ASRC3-Playback",
> +			.channels_min = 1,
> +			.channels_max = 32,
> +			.rate_min = 8000,
> +			.rate_max = 768000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_EASRC_FORMATS,
> +		},
> +		.capture = {
> +			.stream_name = "ASRC3-Capture",
> +			.channels_min = 1,
> +			.channels_max = 32,
> +			.rate_min = 8000,
> +			.rate_max = 768000,
> +			.rates = SNDRV_PCM_RATE_KNOT,
> +			.formats = FSL_EASRC_FORMATS |
> +				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
> +		},
> +		.ops = &fsl_easrc_dai_ops,
>  	},
> -	.ops = &fsl_easrc_dai_ops,
>  };
>
>  static const struct snd_soc_component_driver fsl_easrc_component = {
> @@ -2234,7 +2306,7 @@ static int fsl_easrc_probe(struct platform_device *pdev)
>  	regcache_cache_only(easrc->regmap, true);
>
>  	ret = devm_snd_soc_register_component(dev, &fsl_easrc_component,
> -					      &fsl_easrc_dai, 1);
> +					      fsl_easrc_dai, ARRAY_SIZE(fsl_easrc_dai));
>  	if (ret) {
>  		dev_err(dev, "failed to register ASoC DAI\n");
>  		goto err_pm_disable;
> --
> 2.34.1
>
>

Re: [RESEND PATCH v5 5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path

[Daniel Baluta]

On 9/22/26 06:34, shengjiu.wang@oss.nxp.com wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
> 
> The i.MX EASRC hardware supports four independent conversion contexts
> (A, B, C, D). The driver previously registered a single DAI with generic
> stream names "ASRC-Playback" and "ASRC-Capture", which prevents
> multiple independent conversion paths from being used simultaneously.
> 
> Replace the single fsl_easrc_dai instance with an array of four DAI
> drivers to allow up to four independent conversion paths to be active
> at the same time:
> 
>   easrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
>   easrc-1 -- ASRC1-Playback / ASRC1-Capture
>   easrc-2 -- ASRC2-Playback / ASRC2-Capture
>   easrc-3 -- ASRC3-Playback / ASRC3-Capture
> 
> easrc-0 retains the original generic stream names to preserve backward
> compatibility with existing machine drivers and board configurations.
> Each DAI retains the same channel, rate and format capabilities as the
> original, including IEC958 subframe support on the capture side. Update
> the devm_snd_soc_register_component() call to register all four DAIs.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>

Re: [RESEND PATCH v5 0/5] ASoC: fsl_asrc/fsl_easrc: expose per-pair/context DAIs and fix DMA race

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 443 bytes --]

On Tue, Sep 22, 2026 at 11:34:23AM +0800, shengjiu.wang@oss.nxp.com wrote:

> Changes since v5:
> - rebase to latest master of linux-next

That's not a resend, a rebase is a new version.  This is all confusing
b4 badly, it's not picking up any of the reviews as being attached to
the v5 that already exist and doesn't even look at the new version since
it sees that it already has v5.  Can you please send a v6 with all the
reviews pulled in?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]