ath10k-firmware: QCA9888 hw2.0: Add EnGenius EMR5000 specific BDFs

ath10k-firmware: QCA9888 hw2.0: Add EnGenius EMR5000 specific BDFs

[frank.shen]

[-- Attachment #1: Type: text/plain, Size: 1276 bytes --]

Hi,

The support for this device was added a while ago to OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior. This request contains the file for QCA9888. The QCA4019 one will be submitted in a different request.

Now to the questions from the wiki page [1]:

l       description for what hardware this is:
-       it is a IPQ4019 based board
-       one QCA4019 radio is used as 2.4GHz radio
-       one QCA4019 radio is used as 5GHz radio
-       an additional QCA9888 5GHz radio is attached via PCI

l       origin of the board file (did you create it yourself or where you downloaded)
-       taken from stock firmware image

l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
-       QCA9888 hw2.0

md5sum of each new board file to add

+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMR5000
md5sum: a99b498f7820d6d48b63876d8d055338


Sincerely,
Frank Shen
Engineer
Research and Development
Senao Networks, Inc.
Tel: +886-3-3289289 ext. 2697
Fax: +886-3-3961112

[-- Attachment #2: bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMR5000.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA9888 hw2.0: Add EnGenius EMR5000 specific BDFs

[Kalle Valo]

<frank.shen@senao.com> writes:

> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the the IPQ401X AP-DK
> boards because QCA doesn't provide special IDs for customers and seems
> to use the AP-DK board-ids in the wifi firmware to change its
> behavior. This request contains the file for QCA9888. The QCA4019 one
> will be submitted in a different request.
>
> Now to the questions from the wiki page [1]:
>
> l       description for what hardware this is:
> -       it is a IPQ4019 based board
> -       one QCA4019 radio is used as 2.4GHz radio
> -       one QCA4019 radio is used as 5GHz radio
> -       an additional QCA9888 5GHz radio is attached via PCI
>
> l       origin of the board file (did you create it yourself or where you downloaded)
> -       taken from stock firmware image
>
> l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> -       QCA9888 hw2.0
>
> md5sum of each new board file to add
>
> + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMR5000
> md5sum: a99b498f7820d6d48b63876d8d055338

Thanks, added to QCA9888/hw2.0/board-2.bin:

New:
bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMR5000

Changed:


Deleted:

1 board image(s) added, 0 changed, 0 deleted, 9 in total

https://github.com/kvalo/ath10k-firmware/commit/4965bc76b262b61c476bd4f0606e846a3ef3a1c3

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k