ath10k-firmware: QCA4019 hw1.0: Add EnGenius ENH1350EXT specific BDFs

ath10k-firmware: QCA4019 hw1.0: Add EnGenius ENH1350EXT specific BDFs

[GH.Lin]

[-- Attachment #1: Type: text/plain, Size: 1343 bytes --]

Hi,

The support for this device was added a while ago to OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.

Now to the questions from the wiki page [1]:

l       description for what hardware this is:
-       It is an IPQ4018 based board.
-       One QCA40xx radio is used as 2.4GHz radio
-       One QCA40xx radio is used as 5GHz radio

l       origin of the board file (did you create it yourself or where you downloaded)
-       Taken from stock firmware image

l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
-       QCA4019 hw1.0

a7bfd8557e29620190eee3a34537b8f6  bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT.bin
7bb7e9ab117c1a560dc3259f30bf5081  bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT.bin

Sincerely,
                                               Guan-Hong Lin(林冠宏)
Software Engineer,
Research and Development,
Senao Networks, Inc.
Tel: +886-3-3289289 ext. 2692
Fax: +886-3-3961112


[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #4: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA4019 hw1.0: Add EnGenius ENH1350EXT specific BDFs

[Kalle Valo]

<GH.Lin@senao.com> writes:

> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the IPQ401X AP-DK boards
> because QCA doesn't provide special IDs for customers and seems to use
> the AP-DK board-ids in the wifi firmware to change its behavior.
>
> Now to the questions from the wiki page [1]:
>
> l       description for what hardware this is:
> -       It is an IPQ4018 based board.
> -       One QCA40xx radio is used as 2.4GHz radio
> -       One QCA40xx radio is used as 5GHz radio
>
> l       origin of the board file (did you create it yourself or where you downloaded)
> -       Taken from stock firmware image
>
> l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> -       QCA4019 hw1.0
>
> a7bfd8557e29620190eee3a34537b8f6 
> bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT.bin
> 7bb7e9ab117c1a560dc3259f30bf5081 
> bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT.bin

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 60 in total

https://github.com/kvalo/ath10k-firmware/commit/08fccb1aed0c1693cdf04af80932d8031f949c26

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k