Re: [PATCH v4 9/9] usb: dwc3: Add host-mode as default support

[Felipe Balbi <balbi@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 3180 bytes --]


Hi,

John Stultz <john.stultz@linaro.org> writes:
> Support configuring the default role the controller assumes as
> host mode when the usb role is USB_ROLE_NONE
>
> This patch was split out from a larger patch originally by
> Yu Chen <chenyu56@huawei.com>
>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> CC: ShuFan Lee <shufan_lee@richtek.com>
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Cc: Yu Chen <chenyu56@huawei.com>
> Cc: Felipe Balbi <balbi@kernel.org>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Jun Li <lijun.kernel@gmail.com>
> Cc: Valentin Schneider <valentin.schneider@arm.com>
> Cc: Jack Pham <jackp@codeaurora.org>
> Cc: linux-usb@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
> v3: Split this patch out from addition of usb-role-switch
>     handling
> ---
>  drivers/usb/dwc3/core.h |  3 +++
>  drivers/usb/dwc3/drd.c  | 20 ++++++++++++++++----
>  2 files changed, 19 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 6f19e9891767..3c879c9ab1aa 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -953,6 +953,8 @@ struct dwc3_scratchpad_array {
>   *		- USBPHY_INTERFACE_MODE_UTMI
>   *		- USBPHY_INTERFACE_MODE_UTMIW
>   * @role_sw: usb_role_switch handle
> + * @role_switch_default_mode: default operation mode of controller while
> + *			usb role is USB_ROLE_NONE.
>   * @usb2_phy: pointer to USB2 PHY
>   * @usb3_phy: pointer to USB3 PHY
>   * @usb2_generic_phy: pointer to USB2 PHY
> @@ -1087,6 +1089,7 @@ struct dwc3 {
>  	struct notifier_block	edev_nb;
>  	enum usb_phy_interface	hsphy_mode;
>  	struct usb_role_switch	*role_sw;
> +	enum usb_dr_mode	role_switch_default_mode;
>  
>  	u32			fladj;
>  	u32			irq_gadget;
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index 61d4fd8aead4..0e3466fe5ac4 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -489,7 +489,10 @@ static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
>  		mode = DWC3_GCTL_PRTCAP_DEVICE;
>  		break;
>  	default:
> -		mode = DWC3_GCTL_PRTCAP_DEVICE;
> +		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
> +			mode = DWC3_GCTL_PRTCAP_HOST;
> +		else
> +			mode = DWC3_GCTL_PRTCAP_DEVICE;
>  		break;
>  	}
>  
> @@ -515,7 +518,10 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
>  		role = dwc->current_otg_role;
>  		break;
>  	default:
> -		role = USB_ROLE_DEVICE;
> +		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
> +			role = USB_ROLE_HOST;

look at this, we now have 3 different encodings for role which DWC3
needs to understand. One is its own PRTCAP_DIR, then there USB_DR_MODE_*
and now USB_ROLE_*, can we make it so that we only have one private
encoding and one generic encoding?

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]