All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-sound@vger.kernel.org,
	Herve Codina <herve.codina@bootlin.com>
Subject: Re: [PATCH v3 0/4] ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR to user_access_begin/user_access_end()
Date: Sat, 14 Jun 2025 13:40:36 +0200	[thread overview]
Message-ID: <87a56ar1or.wl-tiwai@suse.de> (raw)
In-Reply-To: <cover.1749883041.git.christophe.leroy@csgroup.eu>

On Sat, 14 Jun 2025 08:43:13 +0200,
Christophe Leroy wrote:
> 
> This series converts all variants of SNDRV_PCM_IOCTL_SYNC_PTR to 
> user_access_begin/user_access_end() in order to reduce the CPU load
> measured in function snd_pcm_ioctl.
> 
> With the current implementation, "perf top" reports a high load in
> snd_pcm_iotcl(). Most calls to that function are SNDRV_PCM_IOCTL_SYNC_PTR.
> 
>     14.20%  test_perf           [.] engine_main
> ==> 12.86%  [kernel]            [k] snd_pcm_ioctl
>     11.91%  [kernel]            [k] finish_task_switch.isra.0
>      4.15%  [kernel]            [k] snd_pcm_group_unlock_irq.part.0
>      4.07%  libc.so.6           [.] __ioctl_time64
>      3.58%  libasound.so.2.0.0  [.] __snd_pcm_mmap_begin_generic
>      3.37%  [kernel]            [k] sys_ioctl
>      2.96%  libasound.so.2.0.0  [.] snd_pcm_hw_avail_update
>      2.73%  libasound.so.2.0.0  [.] __snd_pcm_mmap_begin
>      2.58%  [kernel]            [k] system_call_exception
>      1.93%  libasound.so.2.0.0  [.] sync_ptr1
>      1.85%  libasound.so.2.0.0  [.] snd_pcm_unlock
>      1.84%  libasound.so.2.0.0  [.] snd_pcm_mmap_begin
>      1.83%  libasound.so.2.0.0  [.] bad_pcm_state
>      1.68%  libasound.so.2.0.0  [.] snd_pcm_mmap_avail
>      1.67%  libasound.so.2.0.0  [.] snd_pcm_avail_update
> 
> A tentative was done with going via intermediaire structs on stack to
> replace the multiple get_user() and put_user() with copy_from_user()
> and copy_to_user(). But copy_from_user() calls _copy_from_user() and
> copy_to_user() calls _copy_to_user(). Both then call __copy_tofrom_user().
> In total it is 16.4% so it is worse than before.
> 
>     14.47%  test_perf           [.] engine_main
>     12.00%  [kernel]            [k] finish_task_switch.isra.0
> ==>  8.37%  [kernel]            [k] snd_pcm_ioctl
>      5.44%  libc.so.6           [.] __ioctl_time64
>      5.03%  [kernel]            [k] snd_pcm_group_unlock_irq.part.0
> ==>  4.86%  [kernel]            [k] __copy_tofrom_user
>      4.62%  [kernel]            [k] sys_ioctl
>      3.22%  [kernel]            [k] system_call_exception
>      2.42%  libasound.so.2.0.0  [.] snd_pcm_mmap_begin
>      2.31%  [kernel]            [k] fdget
>      2.23%  libasound.so.2.0.0  [.] __snd_pcm_mmap_begin_generic
>      2.19%  [kernel]            [k] syscall_exit_prepare
>      1.92%  libasound.so.2.0.0  [.] snd_pcm_mmap_avail
>      1.86%  libasound.so.2.0.0  [.] __snd_pcm_mmap_begin
>      1.68%  libasound.so.2.0.0  [.] snd_pcm_hw_avail_update
> ==>  1.67%  [kernel]            [k] _copy_from_user
>      1.66%  libasound.so.2.0.0  [.] bad_pcm_state
> ==>  1.53%  [kernel]            [k] _copy_to_user
>      1.40%  libasound.so.2.0.0  [.] sync_ptr1
> 
> With this series which uses unsafe_put_user() and unsafe_get_user(),
> the load is significantly reduced:
> 
>     17.46%  test_perf           [.] engine_main
>      9.14%  [kernel]            [k] finish_task_switch.isra.0
> ==>  4.92%  [kernel]            [k] snd_pcm_ioctl
>      3.99%  [kernel]            [k] snd_pcm_group_unlock_irq.part.0
>      3.71%  libc.so.6           [.] __ioctl_time64
>      3.61%  libasound.so.2.0.0  [.] __snd_pcm_mmap_begin_generic
>      2.72%  libasound.so.2.0.0  [.] sync_ptr1
>      2.65%  [kernel]            [k] system_call_exception
>      2.46%  [kernel]            [k] sys_ioctl
>      2.43%  [kernel]            [k] __rseq_handle_notify_resume
>      2.34%  [kernel]            [k] do_epoll_wait
>      2.30%  libasound.so.2.0.0  [.] __snd_pcm_mmap_commit
>      2.14%  libasound.so.2.0.0  [.] __snd_pcm_avail
>      2.04%  libasound.so.2.0.0  [.] snd_pcm_hw_avail_update
>      1.89%  libasound.so.2.0.0  [.] snd_pcm_lock
>      1.84%  libasound.so.2.0.0  [.] snd_pcm_mmap_avail
>      1.76%  libasound.so.2.0.0  [.] __snd_pcm_avail_update
>      1.61%  libasound.so.2.0.0  [.] bad_pcm_state
>      1.60%  libasound.so.2.0.0  [.] __snd_pcm_mmap_begin
>      1.49%  libasound.so.2.0.0  [.] query_status_data
> 
> Since v2:
> - Fix macros to skip user_read_access_end() when user_read_access_begin() failed
> - Fix some tabulations for properly aligning backslashes
> 
> Since RFC:
> - Added a cover letter to summarize some of the measurements done on and around the RFC
> - Fixed relevant checkpatch feedback
> - Split last patch in two
> 
> Christophe Leroy (4):
>   ALSA: pcm: refactor copy from/to user in SNDRV_PCM_IOCTL_SYNC_PTR
>   ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR to
>     user_access_begin/user_access_end()
>   ALSA: pcm: Replace [audio_]tstamp_[n]sec by struct __snd_timespec in
>     struct snd_pcm_mmap_status32
>   ALSA: pcm: Convert snd_pcm_sync_ptr() to
>     user_access_begin/user_access_end()

Applied now all patches.  Thanks!


Takashi

      parent reply	other threads:[~2025-06-14 11:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-14  6:43 [PATCH v3 0/4] ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR to user_access_begin/user_access_end() Christophe Leroy
2025-06-14  6:43 ` [PATCH v3 1/4] ALSA: pcm: refactor copy from/to user in SNDRV_PCM_IOCTL_SYNC_PTR Christophe Leroy
2025-06-14  6:43 ` [PATCH v3 2/4] ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR to user_access_begin/user_access_end() Christophe Leroy
2025-06-14  6:43 ` [PATCH v3 3/4] ALSA: pcm: Replace [audio_]tstamp_[n]sec by struct __snd_timespec in struct snd_pcm_mmap_status32 Christophe Leroy
2025-06-14  6:43 ` [PATCH v3 4/4] ALSA: pcm: Convert snd_pcm_sync_ptr() to user_access_begin/user_access_end() Christophe Leroy
2025-06-14 11:40 ` Takashi Iwai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87a56ar1or.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=christophe.leroy@csgroup.eu \
    --cc=herve.codina@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.