From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-sound@vger.kernel.org,
Herve Codina <herve.codina@bootlin.com>
Subject: [PATCH v3 0/4] ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR to user_access_begin/user_access_end()
Date: Sat, 14 Jun 2025 08:43:13 +0200 [thread overview]
Message-ID: <cover.1749883041.git.christophe.leroy@csgroup.eu> (raw)
This series converts all variants of SNDRV_PCM_IOCTL_SYNC_PTR to
user_access_begin/user_access_end() in order to reduce the CPU load
measured in function snd_pcm_ioctl.
With the current implementation, "perf top" reports a high load in
snd_pcm_iotcl(). Most calls to that function are SNDRV_PCM_IOCTL_SYNC_PTR.
14.20% test_perf [.] engine_main
==> 12.86% [kernel] [k] snd_pcm_ioctl
11.91% [kernel] [k] finish_task_switch.isra.0
4.15% [kernel] [k] snd_pcm_group_unlock_irq.part.0
4.07% libc.so.6 [.] __ioctl_time64
3.58% libasound.so.2.0.0 [.] __snd_pcm_mmap_begin_generic
3.37% [kernel] [k] sys_ioctl
2.96% libasound.so.2.0.0 [.] snd_pcm_hw_avail_update
2.73% libasound.so.2.0.0 [.] __snd_pcm_mmap_begin
2.58% [kernel] [k] system_call_exception
1.93% libasound.so.2.0.0 [.] sync_ptr1
1.85% libasound.so.2.0.0 [.] snd_pcm_unlock
1.84% libasound.so.2.0.0 [.] snd_pcm_mmap_begin
1.83% libasound.so.2.0.0 [.] bad_pcm_state
1.68% libasound.so.2.0.0 [.] snd_pcm_mmap_avail
1.67% libasound.so.2.0.0 [.] snd_pcm_avail_update
A tentative was done with going via intermediaire structs on stack to
replace the multiple get_user() and put_user() with copy_from_user()
and copy_to_user(). But copy_from_user() calls _copy_from_user() and
copy_to_user() calls _copy_to_user(). Both then call __copy_tofrom_user().
In total it is 16.4% so it is worse than before.
14.47% test_perf [.] engine_main
12.00% [kernel] [k] finish_task_switch.isra.0
==> 8.37% [kernel] [k] snd_pcm_ioctl
5.44% libc.so.6 [.] __ioctl_time64
5.03% [kernel] [k] snd_pcm_group_unlock_irq.part.0
==> 4.86% [kernel] [k] __copy_tofrom_user
4.62% [kernel] [k] sys_ioctl
3.22% [kernel] [k] system_call_exception
2.42% libasound.so.2.0.0 [.] snd_pcm_mmap_begin
2.31% [kernel] [k] fdget
2.23% libasound.so.2.0.0 [.] __snd_pcm_mmap_begin_generic
2.19% [kernel] [k] syscall_exit_prepare
1.92% libasound.so.2.0.0 [.] snd_pcm_mmap_avail
1.86% libasound.so.2.0.0 [.] __snd_pcm_mmap_begin
1.68% libasound.so.2.0.0 [.] snd_pcm_hw_avail_update
==> 1.67% [kernel] [k] _copy_from_user
1.66% libasound.so.2.0.0 [.] bad_pcm_state
==> 1.53% [kernel] [k] _copy_to_user
1.40% libasound.so.2.0.0 [.] sync_ptr1
With this series which uses unsafe_put_user() and unsafe_get_user(),
the load is significantly reduced:
17.46% test_perf [.] engine_main
9.14% [kernel] [k] finish_task_switch.isra.0
==> 4.92% [kernel] [k] snd_pcm_ioctl
3.99% [kernel] [k] snd_pcm_group_unlock_irq.part.0
3.71% libc.so.6 [.] __ioctl_time64
3.61% libasound.so.2.0.0 [.] __snd_pcm_mmap_begin_generic
2.72% libasound.so.2.0.0 [.] sync_ptr1
2.65% [kernel] [k] system_call_exception
2.46% [kernel] [k] sys_ioctl
2.43% [kernel] [k] __rseq_handle_notify_resume
2.34% [kernel] [k] do_epoll_wait
2.30% libasound.so.2.0.0 [.] __snd_pcm_mmap_commit
2.14% libasound.so.2.0.0 [.] __snd_pcm_avail
2.04% libasound.so.2.0.0 [.] snd_pcm_hw_avail_update
1.89% libasound.so.2.0.0 [.] snd_pcm_lock
1.84% libasound.so.2.0.0 [.] snd_pcm_mmap_avail
1.76% libasound.so.2.0.0 [.] __snd_pcm_avail_update
1.61% libasound.so.2.0.0 [.] bad_pcm_state
1.60% libasound.so.2.0.0 [.] __snd_pcm_mmap_begin
1.49% libasound.so.2.0.0 [.] query_status_data
Since v2:
- Fix macros to skip user_read_access_end() when user_read_access_begin() failed
- Fix some tabulations for properly aligning backslashes
Since RFC:
- Added a cover letter to summarize some of the measurements done on and around the RFC
- Fixed relevant checkpatch feedback
- Split last patch in two
Christophe Leroy (4):
ALSA: pcm: refactor copy from/to user in SNDRV_PCM_IOCTL_SYNC_PTR
ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR to
user_access_begin/user_access_end()
ALSA: pcm: Replace [audio_]tstamp_[n]sec by struct __snd_timespec in
struct snd_pcm_mmap_status32
ALSA: pcm: Convert snd_pcm_sync_ptr() to
user_access_begin/user_access_end()
sound/core/pcm_compat.c | 14 +-----
sound/core/pcm_native.c | 98 ++++++++++++++++++++++++++---------------
2 files changed, 64 insertions(+), 48 deletions(-)
--
2.47.0
next reply other threads:[~2025-06-14 6:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-14 6:43 Christophe Leroy [this message]
2025-06-14 6:43 ` [PATCH v3 1/4] ALSA: pcm: refactor copy from/to user in SNDRV_PCM_IOCTL_SYNC_PTR Christophe Leroy
2025-06-14 6:43 ` [PATCH v3 2/4] ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR to user_access_begin/user_access_end() Christophe Leroy
2025-06-14 6:43 ` [PATCH v3 3/4] ALSA: pcm: Replace [audio_]tstamp_[n]sec by struct __snd_timespec in struct snd_pcm_mmap_status32 Christophe Leroy
2025-06-14 6:43 ` [PATCH v3 4/4] ALSA: pcm: Convert snd_pcm_sync_ptr() to user_access_begin/user_access_end() Christophe Leroy
2025-06-14 11:40 ` [PATCH v3 0/4] ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR " Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1749883041.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=herve.codina@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.