All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@kernel.org>
To: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Cc: <ath11k@lists.infradead.org>,  <linux-wireless@vger.kernel.org>,
	 Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Subject: Re: [PATCH] wifi: ath11k: update proper pdev/vdev id for testmode command
Date: Wed, 26 Apr 2023 10:29:22 +0300	[thread overview]
Message-ID: <87a5yvt831.fsf@kernel.org> (raw)
In-Reply-To: <20230424092420.12794-1-quic_rajkbhag@quicinc.com> (Raj Kumar Bhagat's message of "Mon, 24 Apr 2023 14:54:20 +0530")

Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes:

> From: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
>
> User can extend test mode command support to set vdev and pdev params
> for debug purpose at run time by sending vdev/pdev param set command
> through the testmode command interface.
>
> Fill the proper pdev/vdev id in driver since, pdev/vdev id details may
> not be available at user space. It will make sure that the proper
> vdev/pdev ids are sent to firmware.
>
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
>
> Depends-On:
> 	[v3,3/4] wifi: ath11k: factory test mode support
>
> Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
> ---

Please add 'Depends-on' after the '---' line. This is for future
patches, no need to resend because of this.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@kernel.org>
To: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Cc: <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>,
	Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Subject: Re: [PATCH] wifi: ath11k: update proper pdev/vdev id for testmode command
Date: Wed, 26 Apr 2023 10:29:22 +0300	[thread overview]
Message-ID: <87a5yvt831.fsf@kernel.org> (raw)
In-Reply-To: <20230424092420.12794-1-quic_rajkbhag@quicinc.com> (Raj Kumar Bhagat's message of "Mon, 24 Apr 2023 14:54:20 +0530")

Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes:

> From: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
>
> User can extend test mode command support to set vdev and pdev params
> for debug purpose at run time by sending vdev/pdev param set command
> through the testmode command interface.
>
> Fill the proper pdev/vdev id in driver since, pdev/vdev id details may
> not be available at user space. It will make sure that the proper
> vdev/pdev ids are sent to firmware.
>
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
>
> Depends-On:
> 	[v3,3/4] wifi: ath11k: factory test mode support
>
> Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
> ---

Please add 'Depends-on' after the '---' line. This is for future
patches, no need to resend because of this.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

  reply	other threads:[~2023-04-26  7:29 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-24  9:24 [PATCH] wifi: ath11k: update proper pdev/vdev id for testmode command Raj Kumar Bhagat
2023-04-24  9:24 ` Raj Kumar Bhagat
2023-04-26  7:29 ` Kalle Valo [this message]
2023-04-26  7:29   ` Kalle Valo
2023-04-26  7:39   ` Raj Kumar Bhagat
2023-04-26  7:39     ` Raj Kumar Bhagat
2024-08-06  7:45 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87a5yvt831.fsf@kernel.org \
    --to=kvalo@kernel.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=quic_rajkbhag@quicinc.com \
    --cc=quic_vnaralas@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.