ath10k-firmware: QCA9980 hw2.0: add ASRock G10 specific BDFs

ath10k-firmware: QCA9980 hw2.0: add ASRock G10 specific BDFs

[Christian Lamparter]

[-- Attachment #1: Type: text/plain, Size: 1060 bytes --]

Hi,

this is a set of board.bin files for the ASRock G10,
which I wish to be added to the ath10k-firmware repository.

As per the current "Submitting board files" guidelines [1]:

* description for what hardware this is:
  - it is a IPQ8064 based board with
    - one QCA9980 radio is used as 2.4 GHz radio
    - one QCA9980 radio is used as 5 GHz radio

* origin of the board file (did you create it yourself or where you downloaded
  all files were extracted from official vendor firmware which was on the device.

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
  - qca9980 hw2.0
    + bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
    + bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10
* md5sum of each new board file to add

ae069744baeebfd6861e8080a92439ca  bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10 
9e196846841a186e61ea208cc873384c  bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10

Best wishes
Christian Lamparter

[1] <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>

[-- Attachment #2: bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #4: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA9980 hw2.0: add ASRock G10 specific BDFs

[Kalle Valo]

Christian Lamparter <chunkeey@gmail.com> writes:

> this is a set of board.bin files for the ASRock G10,
> which I wish to be added to the ath10k-firmware repository.
>
> As per the current "Submitting board files" guidelines [1]:
>
> * description for what hardware this is:
>   - it is a IPQ8064 based board with
>     - one QCA9980 radio is used as 2.4 GHz radio
>     - one QCA9980 radio is used as 5 GHz radio
>
> * origin of the board file (did you create it yourself or where you downloaded
>   all files were extracted from official vendor firmware which was on the device.
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>   - qca9980 hw2.0
>     + bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
>     + bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10
> * md5sum of each new board file to add
>
> ae069744baeebfd6861e8080a92439ca  bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10 
> 9e196846841a186e61ea208cc873384c  bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10

There is no QCA9880 directory in ath10k-firmware, do you mean this
should be added to QCA988X/hw2.0/board-2.bin?

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA9980 hw2.0: add ASRock G10 specific BDFs

[Christian Lamparter]

Hi Kalle,

On 21/01/2022 15:05, Kalle Valo wrote:
> Christian Lamparter <chunkeey@gmail.com> writes:
> 
>> this is a set of board.bin files for the ASRock G10,
>> which I wish to be added to the ath10k-firmware repository.
>>
>> As per the current "Submitting board files" guidelines [1]:
>>
>> * description for what hardware this is:
>>    - it is a IPQ8064 based board with
>>      - one QCA9980 radio is used as 2.4 GHz radio
>>      - one QCA9980 radio is used as 5 GHz radio
>>
>> * origin of the board file (did you create it yourself or where you downloaded
>>    all files were extracted from official vendor firmware which was on the device.
>>
>> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>>    - qca9980 hw2.0
>>      + bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
>>      + bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10
>> * md5sum of each new board file to add
>>
>> ae069744baeebfd6861e8080a92439ca  bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
>> 9e196846841a186e61ea208cc873384c  bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10
> 
> There is no QCA9880 directory in ath10k-firmware, do you mean this
> should be added to QCA988X/hw2.0/board-2.bin?

It's a 9980 chip. This was 9984 predecessor.
         ^ = Watch out for that 9! <https://www.qualcomm.com/products/qca9980>

It would belong to the 99X0 directory of your ath10k-firmware repo:
https://github.com/kvalo/ath10k-firmware/tree/master/QCA99X0/hw2.0

But there's one issue: there is no v2 board-2.bin in there yet.

However the codeaurora's ath10k-firmware repo provides the board-2.bin here:
https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0/board-2.bin

(this also includes the reference bmi-board-id for 2, 4 and 6. I guess this
would help other people as well):
https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0

So could you please add that board-2.bin from codeaurora and add
the ASRock G10 specific variant to it? That would be sweet.

Thank you,
Christian

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA9980 hw2.0: add ASRock G10 specific BDFs

[Kalle Valo]

Christian Lamparter <chunkeey@gmail.com> writes:

> Hi Kalle,
>
> On 21/01/2022 15:05, Kalle Valo wrote:
>> Christian Lamparter <chunkeey@gmail.com> writes:
>>
>>> this is a set of board.bin files for the ASRock G10,
>>> which I wish to be added to the ath10k-firmware repository.
>>>
>>> As per the current "Submitting board files" guidelines [1]:
>>>
>>> * description for what hardware this is:
>>>    - it is a IPQ8064 based board with
>>>      - one QCA9980 radio is used as 2.4 GHz radio
>>>      - one QCA9980 radio is used as 5 GHz radio
>>>
>>> * origin of the board file (did you create it yourself or where you downloaded
>>>    all files were extracted from official vendor firmware which was on the device.
>>>
>>> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>>>    - qca9980 hw2.0
>>>      + bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
>>>      + bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10
>>> * md5sum of each new board file to add
>>>
>>> ae069744baeebfd6861e8080a92439ca  bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
>>> 9e196846841a186e61ea208cc873384c  bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10
>>
>> There is no QCA9880 directory in ath10k-firmware, do you mean this
>> should be added to QCA988X/hw2.0/board-2.bin?
>
> It's a 9980 chip. This was 9984 predecessor.
>         ^ = Watch out for that 9! <https://www.qualcomm.com/products/qca9980>

Good that you pointed out that 9, I missed it.

> It would belong to the 99X0 directory of your ath10k-firmware repo:
> https://github.com/kvalo/ath10k-firmware/tree/master/QCA99X0/hw2.0

Ok, then I would prefer that the subject starts with:

ath10k-firmware: QCA99X0 hw2.0: ...

Ie. I can directly derive the directory name from the subject. But no
need to resend anything, this is just for the future.

> But there's one issue: there is no v2 board-2.bin in there yet.
>
> However the codeaurora's ath10k-firmware repo provides the board-2.bin here:
> https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0/board-2.bin
>
> (this also includes the reference bmi-board-id for 2, 4 and 6. I guess this
> would help other people as well):
> https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0
>
> So could you please add that board-2.bin from codeaurora

Done:

https://github.com/kvalo/ath10k-firmware/commit/2d8566686428430ebedfaea47e3782ac25901408

> and add the ASRock G10 specific variant to it? That would be sweet.

I'll do that next. Thanks for the thorough instructions, I appreciate it
a lot.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA9980 hw2.0: add ASRock G10 specific BDFs

[Kalle Valo]

Christian Lamparter <chunkeey@gmail.com> writes:

> Hi,
>
> this is a set of board.bin files for the ASRock G10,
> which I wish to be added to the ath10k-firmware repository.
>
> As per the current "Submitting board files" guidelines [1]:
>
> * description for what hardware this is:
>   - it is a IPQ8064 based board with
>     - one QCA9980 radio is used as 2.4 GHz radio
>     - one QCA9980 radio is used as 5 GHz radio
>
> * origin of the board file (did you create it yourself or where you downloaded
>   all files were extracted from official vendor firmware which was on the device.
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>   - qca9980 hw2.0
>     + bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
>     + bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10
> * md5sum of each new board file to add
>
> ae069744baeebfd6861e8080a92439ca  bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10 
> 9e196846841a186e61ea208cc873384c  bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10

Thanks, added to QCA99X0/hw2.0/board-2.bin:

New:
bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 13 in total

https://github.com/kvalo/ath10k-firmware/commit/e404444dfc0baf7d0fcde21ab8ec333608c9960c

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k