From: Marc Zyngier <maz@kernel.org>
To: Eric Auger <eric.auger@redhat.com>
Cc: kvm@vger.kernel.org, shuah@kernel.org,
linux-kernel@vger.kernel.org, pbonzini@redhat.com,
kvmarm@lists.cs.columbia.edu, eric.auger.pro@gmail.com
Subject: Re: [PATCH 3/9] KVM: arm64: vgic-v3: Fix error handling in vgic_v3_set_redist_base()
Date: Mon, 28 Dec 2020 15:35:11 +0000 [thread overview]
Message-ID: <87a6tyoseo.wl-maz@kernel.org> (raw)
In-Reply-To: <20201212185010.26579-4-eric.auger@redhat.com>
Hi Eric,
On Sat, 12 Dec 2020 18:50:04 +0000,
Eric Auger <eric.auger@redhat.com> wrote:
>
> vgic_register_all_redist_iodevs may succeed while
> vgic_register_all_redist_iodevs fails. For example this can happen
The same function cannot both fail and succeed ;-) Can you shed some
light on what you had in mind?
> while adding a redistributor region overlapping a dist region. The
> failure only is detected on vgic_register_all_redist_iodevs when
> vgic_v3_check_base() gets called.
>
> In such a case, remove the newly added redistributor region and free
> it.
>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
> ---
> arch/arm64/kvm/vgic/vgic-mmio-v3.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
> index 8e8a862def76..581f0f490000 100644
> --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
> +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
> @@ -866,8 +866,14 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count)
> * afterwards will register the iodevs when needed.
> */
> ret = vgic_register_all_redist_iodevs(kvm);
> - if (ret)
> + if (ret) {
> + struct vgic_redist_region *rdreg =
> + vgic_v3_rdist_region_from_index(kvm, index);
> +
nit: consider splitting declaration and assignment so that we avoid
the line split if you insist on the 80 character limit.
> + list_del(&rdreg->list);
> + kfree(rdreg);
> return ret;
> + }
>
> return 0;
> }
> --
> 2.21.3
>
>
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: Eric Auger <eric.auger@redhat.com>
Cc: eric.auger.pro@gmail.com, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
drjones@redhat.com, alexandru.elisei@arm.com,
james.morse@arm.com, julien.thierry.kdev@gmail.com,
suzuki.poulose@arm.com, shuah@kernel.org, pbonzini@redhat.com
Subject: Re: [PATCH 3/9] KVM: arm64: vgic-v3: Fix error handling in vgic_v3_set_redist_base()
Date: Mon, 28 Dec 2020 15:35:11 +0000 [thread overview]
Message-ID: <87a6tyoseo.wl-maz@kernel.org> (raw)
In-Reply-To: <20201212185010.26579-4-eric.auger@redhat.com>
Hi Eric,
On Sat, 12 Dec 2020 18:50:04 +0000,
Eric Auger <eric.auger@redhat.com> wrote:
>
> vgic_register_all_redist_iodevs may succeed while
> vgic_register_all_redist_iodevs fails. For example this can happen
The same function cannot both fail and succeed ;-) Can you shed some
light on what you had in mind?
> while adding a redistributor region overlapping a dist region. The
> failure only is detected on vgic_register_all_redist_iodevs when
> vgic_v3_check_base() gets called.
>
> In such a case, remove the newly added redistributor region and free
> it.
>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
> ---
> arch/arm64/kvm/vgic/vgic-mmio-v3.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
> index 8e8a862def76..581f0f490000 100644
> --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
> +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
> @@ -866,8 +866,14 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count)
> * afterwards will register the iodevs when needed.
> */
> ret = vgic_register_all_redist_iodevs(kvm);
> - if (ret)
> + if (ret) {
> + struct vgic_redist_region *rdreg =
> + vgic_v3_rdist_region_from_index(kvm, index);
> +
nit: consider splitting declaration and assignment so that we avoid
the line split if you insist on the 80 character limit.
> + list_del(&rdreg->list);
> + kfree(rdreg);
> return ret;
> + }
>
> return 0;
> }
> --
> 2.21.3
>
>
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
next prev parent reply other threads:[~2020-12-28 15:35 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-12 18:50 [PATCH 0/9] KVM/ARM: Some vgic fixes and init sequence KVM selftests Eric Auger
2020-12-12 18:50 ` Eric Auger
2020-12-12 18:50 ` [PATCH 1/9] KVM: arm64: vgic-v3: Fix some error codes when setting RDIST base Eric Auger
2020-12-12 18:50 ` Eric Auger
2021-01-06 16:32 ` Alexandru Elisei
2021-01-06 16:32 ` Alexandru Elisei
2021-01-14 10:02 ` Auger Eric
2021-01-14 10:02 ` Auger Eric
2020-12-12 18:50 ` [PATCH 2/9] KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read Eric Auger
2020-12-12 18:50 ` Eric Auger
2021-01-06 17:12 ` Alexandru Elisei
2021-01-06 17:12 ` Alexandru Elisei
2021-01-13 17:18 ` Auger Eric
2021-01-13 17:18 ` Auger Eric
2020-12-12 18:50 ` [PATCH 3/9] KVM: arm64: vgic-v3: Fix error handling in vgic_v3_set_redist_base() Eric Auger
2020-12-12 18:50 ` Eric Auger
2020-12-28 15:35 ` Marc Zyngier [this message]
2020-12-28 15:35 ` Marc Zyngier
2021-01-13 17:18 ` Auger Eric
2021-01-13 17:18 ` Auger Eric
2020-12-12 18:50 ` [PATCH 4/9] KVM: arm/arm64: vgic: Reset base address on kvm_vgic_dist_destroy() Eric Auger
2020-12-12 18:50 ` Eric Auger
2020-12-28 15:41 ` Marc Zyngier
2020-12-28 15:41 ` Marc Zyngier
2021-01-13 17:18 ` Auger Eric
2021-01-13 17:18 ` Auger Eric
2020-12-12 18:50 ` [PATCH 5/9] KVM: arm: move has_run_once after the map_resources Eric Auger
2020-12-12 18:50 ` Eric Auger
2021-01-12 14:55 ` Alexandru Elisei
2021-01-12 14:55 ` Alexandru Elisei
2021-01-14 10:02 ` Auger Eric
2021-01-14 10:02 ` Auger Eric
2021-01-20 15:56 ` Alexandru Elisei
2021-01-20 15:56 ` Alexandru Elisei
2021-03-12 17:27 ` Auger Eric
2021-03-12 17:27 ` Auger Eric
2020-12-12 18:50 ` [PATCH 6/9] docs: kvm: devices/arm-vgic-v3: enhance KVM_DEV_ARM_VGIC_CTRL_INIT doc Eric Auger
2020-12-12 18:50 ` Eric Auger
2021-01-12 15:39 ` Alexandru Elisei
2021-01-12 15:39 ` Alexandru Elisei
2021-01-13 17:18 ` Auger Eric
2021-01-13 17:18 ` Auger Eric
2020-12-12 18:50 ` [PATCH 7/9] KVM: arm64: Simplify argument passing to vgic_uaccess_[read|write] Eric Auger
2020-12-12 18:50 ` Eric Auger
2021-01-12 16:04 ` Alexandru Elisei
2021-01-12 16:04 ` Alexandru Elisei
2021-01-12 16:16 ` Alexandru Elisei
2021-01-12 16:16 ` Alexandru Elisei
2021-01-13 17:18 ` Auger Eric
2021-01-13 17:18 ` Auger Eric
2020-12-12 18:50 ` [PATCH 8/9] KVM: arm64: vgic-v3: Expose GICR_TYPER.Last for userspace Eric Auger
2020-12-12 18:50 ` Eric Auger
2021-01-12 17:02 ` Alexandru Elisei
2021-01-12 17:02 ` Alexandru Elisei
2021-01-14 10:16 ` Auger Eric
2021-01-14 10:16 ` Auger Eric
2021-01-20 16:13 ` Alexandru Elisei
2021-01-20 16:13 ` Alexandru Elisei
2021-03-12 17:26 ` Auger Eric
2021-03-12 17:26 ` Auger Eric
2021-01-12 17:28 ` Alexandru Elisei
2021-01-12 17:28 ` Alexandru Elisei
2021-01-12 17:48 ` Marc Zyngier
2021-01-12 17:48 ` Marc Zyngier
2020-12-12 18:50 ` [PATCH 9/9] KVM: selftests: aarch64/vgic-v3 init sequence tests Eric Auger
2020-12-12 18:50 ` Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a6tyoseo.wl-maz@kernel.org \
--to=maz@kernel.org \
--cc=eric.auger.pro@gmail.com \
--cc=eric.auger@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.