* [Buildroot] [PATCH] configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10
@ 2021-01-24 21:42 Peter Korsgaard
2021-01-24 22:45 ` Yann E. MORIN
0 siblings, 1 reply; 3+ messages in thread
From: Peter Korsgaard @ 2021-01-24 21:42 UTC (permalink / raw)
To: buildroot
The probing order of the two mmc controllers (sdcard and sdio wifi) has
changed in kernel 5.10 since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so change to
root=PARTUUID=.. instead of hardcoding /dev/mmcblkXp2.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
---
board/orangepi/orangepi-r1/boot.cmd | 2 +-
board/orangepi/orangepi-r1/genimage.cfg | 2 ++
configs/orangepi_r1_defconfig | 7 ++++---
3 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/board/orangepi/orangepi-r1/boot.cmd b/board/orangepi/orangepi-r1/boot.cmd
index e927b01e82..2e3a4bb679 100644
--- a/board/orangepi/orangepi-r1/boot.cmd
+++ b/board/orangepi/orangepi-r1/boot.cmd
@@ -1,6 +1,6 @@
setenv fdt_high ffffffff
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+setenv bootargs console=ttyS0,115200 earlyprintk root=PARTUUID=deadbeef-02 rootwait
fatload mmc 0 $kernel_addr_r zImage
fatload mmc 0 $fdt_addr_r sun8i-h2-plus-orangepi-r1.dtb
diff --git a/board/orangepi/orangepi-r1/genimage.cfg b/board/orangepi/orangepi-r1/genimage.cfg
index 01e2c0adc4..e7b32c86ab 100644
--- a/board/orangepi/orangepi-r1/genimage.cfg
+++ b/board/orangepi/orangepi-r1/genimage.cfg
@@ -13,6 +13,8 @@ image boot.vfat {
image sdcard.img {
hdimage {
+ # for root=PARTUUID=deadbeef-02 support
+ disk-signature = 0xdeadbeef
}
partition u-boot {
diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig
index 7c3ec637e5..bad1f9400c 100644
--- a/configs/orangepi_r1_defconfig
+++ b/configs/orangepi_r1_defconfig
@@ -1,13 +1,13 @@
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_FPU_VFPV4=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
BR2_TARGET_GENERIC_HOSTNAME="OrangePi_R1"
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi R1"
BR2_SYSTEM_DHCP="eth0"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.12"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.10"
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-orangepi-r1"
@@ -19,9 +19,10 @@ BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_r1"
BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [Buildroot] [PATCH] configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10
2021-01-24 21:42 [Buildroot] [PATCH] configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10 Peter Korsgaard
@ 2021-01-24 22:45 ` Yann E. MORIN
2021-01-25 13:00 ` Peter Korsgaard
0 siblings, 1 reply; 3+ messages in thread
From: Yann E. MORIN @ 2021-01-24 22:45 UTC (permalink / raw)
To: buildroot
Peter, All,
On 2021-01-24 22:42 +0100, Peter Korsgaard spake thusly:
> The probing order of the two mmc controllers (sdcard and sdio wifi) has
> changed in kernel 5.10 since commit 21b2cec61c04bd1 (mmc: Set
> PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so change to
> root=PARTUUID=.. instead of hardcoding /dev/mmcblkXp2.
>
> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
> ---
> board/orangepi/orangepi-r1/boot.cmd | 2 +-
> board/orangepi/orangepi-r1/genimage.cfg | 2 ++
> configs/orangepi_r1_defconfig | 7 ++++---
> 3 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/board/orangepi/orangepi-r1/boot.cmd b/board/orangepi/orangepi-r1/boot.cmd
> index e927b01e82..2e3a4bb679 100644
> --- a/board/orangepi/orangepi-r1/boot.cmd
> +++ b/board/orangepi/orangepi-r1/boot.cmd
> @@ -1,6 +1,6 @@
> setenv fdt_high ffffffff
>
> -setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
> +setenv bootargs console=ttyS0,115200 earlyprintk root=PARTUUID=deadbeef-02 rootwait
I found deadbeef to be too depressive... I switched it to a better
suited magic: feedc0de (after all, the rootfs will feed code to run).
> fatload mmc 0 $kernel_addr_r zImage
> fatload mmc 0 $fdt_addr_r sun8i-h2-plus-orangepi-r1.dtb
> diff --git a/board/orangepi/orangepi-r1/genimage.cfg b/board/orangepi/orangepi-r1/genimage.cfg
> index 01e2c0adc4..e7b32c86ab 100644
> --- a/board/orangepi/orangepi-r1/genimage.cfg
> +++ b/board/orangepi/orangepi-r1/genimage.cfg
> @@ -13,6 +13,8 @@ image boot.vfat {
>
> image sdcard.img {
> hdimage {
> + # for root=PARTUUID=deadbeef-02 support
> + disk-signature = 0xdeadbeef
And switched here too, of course.
Applied to master, thanks.
Regards,
Yann E. MORIN.
> }
>
> partition u-boot {
> diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig
> index 7c3ec637e5..bad1f9400c 100644
> --- a/configs/orangepi_r1_defconfig
> +++ b/configs/orangepi_r1_defconfig
> @@ -1,13 +1,13 @@
> BR2_arm=y
> BR2_cortex_a7=y
> BR2_ARM_FPU_VFPV4=y
> -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
> BR2_TARGET_GENERIC_HOSTNAME="OrangePi_R1"
> BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi R1"
> BR2_SYSTEM_DHCP="eth0"
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.12"
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.10"
> BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
> BR2_LINUX_KERNEL_DTS_SUPPORT=y
> BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-orangepi-r1"
> @@ -19,9 +19,10 @@ BR2_TARGET_ROOTFS_EXT2_4=y
> BR2_TARGET_UBOOT=y
> BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
> BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_r1"
> BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
> BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
> --
> 2.20.1
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 3+ messages in thread* [Buildroot] [PATCH] configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10
2021-01-24 22:45 ` Yann E. MORIN
@ 2021-01-25 13:00 ` Peter Korsgaard
0 siblings, 0 replies; 3+ messages in thread
From: Peter Korsgaard @ 2021-01-25 13:00 UTC (permalink / raw)
To: buildroot
>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:
> Peter, All,
> On 2021-01-24 22:42 +0100, Peter Korsgaard spake thusly:
>> The probing order of the two mmc controllers (sdcard and sdio wifi) has
>> changed in kernel 5.10 since commit 21b2cec61c04bd1 (mmc: Set
>> PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so change to
>> root=PARTUUID=.. instead of hardcoding /dev/mmcblkXp2.
>>
>> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>> ---
>> board/orangepi/orangepi-r1/boot.cmd | 2 +-
>> board/orangepi/orangepi-r1/genimage.cfg | 2 ++
>> configs/orangepi_r1_defconfig | 7 ++++---
>> 3 files changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/board/orangepi/orangepi-r1/boot.cmd b/board/orangepi/orangepi-r1/boot.cmd
>> index e927b01e82..2e3a4bb679 100644
>> --- a/board/orangepi/orangepi-r1/boot.cmd
>> +++ b/board/orangepi/orangepi-r1/boot.cmd
>> @@ -1,6 +1,6 @@
>> setenv fdt_high ffffffff
>>
>> -setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
>> +setenv bootargs console=ttyS0,115200 earlyprintk root=PARTUUID=deadbeef-02 rootwait
> I found deadbeef to be too depressive... I switched it to a better
> suited magic: feedc0de (after all, the rootfs will feed code to run).
Fine my me. Thinking about it a bit more, a nicer solution would be to
move to GPT partitions and use root=PARTLABEL=rootfs instead of this
somewhat obscure disk signature. I'll send a patch.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-01-25 13:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-01-24 21:42 [Buildroot] [PATCH] configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10 Peter Korsgaard
2021-01-24 22:45 ` Yann E. MORIN
2021-01-25 13:00 ` Peter Korsgaard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.