From: arnaud.patard@rtp-net.org (Arnaud Patard (Rtp))
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] i.MX51 Framebuffer support
Date: Wed, 22 Dec 2010 08:56:14 +0100 [thread overview]
Message-ID: <87bp4eb5r5.fsf@lechat.rtp-net.org> (raw)
In-Reply-To: <1292842127-21406-1-git-send-email-s.hauer@pengutronix.de> (Sascha Hauer's message of "Mon, 20 Dec 2010 11:48:38 +0100")
Sascha Hauer <s.hauer@pengutronix.de> writes:
Hi,
> The following series adds i.MX51 framebuffer support based on the IPUv3. It
> is not perfect but I decided it is good enough to open it for a wider audience
> and collect first reviews. I tested this on a babbage board using both outputs
> (VGA/DVI) with different resolutions up to 1680x1050 and different colour depths.
> I also tested it on one custom board using a fixed display setting.
After adding code to my efika sb machine file and your patchset, I've
seen the light. Err, no. It was a penguin and a login prompt. I guess
it means your patchset is working here.
btw, would be nice to add some comments/docs about :
- the meaning of the fields of the imx_ipuv3_platform_data struct. it's
not clear
- same for .display field of the ipuv3_fb_platform_data
Arnaud
WARNING: multiple messages have this Message-ID (diff)
From: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org, liu.y.victor@gmail.com,
B02280@freescale.com, linux-kernel@vger.kernel.org,
Samuel Ortiz <sameo@linux.intel.com>
Subject: Re: [PATCH v2] i.MX51 Framebuffer support
Date: Wed, 22 Dec 2010 08:56:14 +0100 [thread overview]
Message-ID: <87bp4eb5r5.fsf@lechat.rtp-net.org> (raw)
In-Reply-To: <1292842127-21406-1-git-send-email-s.hauer@pengutronix.de> (Sascha Hauer's message of "Mon, 20 Dec 2010 11:48:38 +0100")
Sascha Hauer <s.hauer@pengutronix.de> writes:
Hi,
> The following series adds i.MX51 framebuffer support based on the IPUv3. It
> is not perfect but I decided it is good enough to open it for a wider audience
> and collect first reviews. I tested this on a babbage board using both outputs
> (VGA/DVI) with different resolutions up to 1680x1050 and different colour depths.
> I also tested it on one custom board using a fixed display setting.
After adding code to my efika sb machine file and your patchset, I've
seen the light. Err, no. It was a penguin and a login prompt. I guess
it means your patchset is working here.
btw, would be nice to add some comments/docs about :
- the meaning of the fields of the imx_ipuv3_platform_data struct. it's
not clear
- same for .display field of the ipuv3_fb_platform_data
Arnaud
next prev parent reply other threads:[~2010-12-22 7:56 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-20 10:48 [PATCH v2] i.MX51 Framebuffer support Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 10:48 ` [PATCH 1/9] ARM i.MX51: Add ipu clock support Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 10:48 ` [PATCH 2/9] ARM i.MX51: rename IPU irqs Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 10:48 ` [PATCH 3/9] Add a mfd IPUv3 driver Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2011-01-03 15:42 ` Sascha Hauer
2011-01-03 15:42 ` Sascha Hauer
2011-01-07 12:08 ` Samuel Ortiz
2011-01-07 12:08 ` Samuel Ortiz
2011-01-31 8:20 ` Sascha Hauer
2011-01-31 8:20 ` Sascha Hauer
2011-02-01 10:51 ` Samuel Ortiz
2011-02-01 10:51 ` Samuel Ortiz
2011-02-01 10:59 ` Sascha Hauer
2011-02-01 10:59 ` Sascha Hauer
2011-02-01 11:44 ` Samuel Ortiz
2011-02-01 11:44 ` Samuel Ortiz
2011-02-01 11:51 ` Russell King - ARM Linux
2011-02-01 11:51 ` Russell King - ARM Linux
2011-02-01 12:07 ` Arnaud Patard (Rtp)
2011-02-01 12:07 ` Arnaud Patard
2011-02-01 12:51 ` Sascha Hauer
2011-02-01 12:51 ` Sascha Hauer
2011-02-01 16:47 ` Uwe Kleine-König
2011-02-01 16:47 ` Uwe Kleine-König
2011-02-01 14:03 ` Samuel Ortiz
2011-02-01 14:03 ` Samuel Ortiz
2010-12-20 10:48 ` [PATCH 4/9] fb: export fb mode db table Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 10:48 ` [PATCH 5/9] Add i.MX5 framebuffer driver Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 10:48 ` [PATCH 6/9] ARM i.MX51: Add IPU device support Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 10:48 ` [PATCH 7/9] ARM i.MX5: Allow to increase max zone order Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 10:48 ` [PATCH 8/9] ARM i.MX5: increase dma consistent size for IPU support Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 10:48 ` [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support Sascha Hauer
2010-12-20 10:48 ` Sascha Hauer
2010-12-20 12:35 ` arden jay
2010-12-20 12:35 ` arden jay
2010-12-22 7:56 ` Arnaud Patard (Rtp) [this message]
2010-12-22 7:56 ` [PATCH v2] i.MX51 Framebuffer support Arnaud Patard
2010-12-22 10:17 ` Peter Korsgaard
2010-12-22 10:17 ` Peter Korsgaard
2010-12-23 20:45 ` Arnaud Patard (Rtp)
2010-12-23 20:45 ` Arnaud Patard
2011-01-05 13:04 ` Julien Boibessot
2011-01-05 13:04 ` Julien Boibessot
2011-01-06 9:42 ` Russell King - ARM Linux
2011-01-06 9:42 ` Russell King - ARM Linux
2011-01-14 9:17 ` Julien Boibessot
2011-01-14 9:17 ` Julien Boibessot
2011-01-06 10:23 ` Sascha Hauer
2011-01-06 10:23 ` Sascha Hauer
2011-01-06 10:32 ` Peter Horton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bp4eb5r5.fsf@lechat.rtp-net.org \
--to=arnaud.patard@rtp-net.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.